Guhring ohg P.O. Box 10 02 D-723 Abstadt Herderstr. 50-54 D-728 Abstadt Teephone: +49 74 31 17-0 Fax: +49 74 31 17-2 79 www.guehring.de Issue 2011 Our PrOduCT range: 1. driing TOOS in HiGH SPeed STee ANd CArbide Twist dris Ratio dris Micro-precision dris Oi feed dris Suband dris Centre dris Core dris Gun dris Driing systems with interchangeabe inserts 6. CuTTiNG TOOS in utra-hard MATeriAS Face miing cutter PF 1000 Cermet and ceramic toos PCD- and PCB-tipped toos 2. THreAd CuTTiNG TOOS in HiGH SPeed STee ANd CArbide Machine taps and futeess taps Oi feed taps and oi feed futeess taps Hand taps Thread miing cutters Dies 7. COATed TOOS A-toos, TiAN-coated SuperA-toos, ATiN-coated C-toos, TiCN-coated F-toos, FIRE-coated (around) P-toos, ACrNN-coated S-toos, TiN-coated (around) M-toos, MoyGide-coated 8. MOduAr TOOiNG SySTeMS TOOiNG SySTeM GM 300 Too hoders, camping systems and accessories to ISO 12164, 69893 and 69871 for transfer ines, machining and turning centres Fexibe TOOiNG SySTeM Ge 100 a tooing system for the combined machining operations facing, chamfering, boring, centering etc. iso indexabe inserts, SHOrT CAMPiNG HOderS ANd kv 0 CArTridGeS 3. MiiNG CuTTerS in HiGH SPeed STee ANd CArbide Ratio end mis Sot dris End mis Radius profie cutters Hard profie cutters Diesinking cutters 4. reaming TOOS in HiGH SPeed STee ANd CArbide NC machine chucking reamers Machine and machine chucking reamers Taper pin reamers Hand reamers 5. COuNTerSiNkiNG TOOS in HiGH SPeed STee ANd CArbide Countersinks, counterbores and spot facers Short counterbores, back spot facers De-burring toos No iabiity can be accepted for printing errors or technica changes of any kind. Our Conditions of Sae and Terms of Payment appy. Avaiabe on request. 9. SPeCiA TOOS to sketch or drawing, the more compex, the better 10. CArbideS FOr PreCiSiON CuTTiNG TOOS 11. CArbide SPeCiA PArTS FOr THe FOrMiNG, MACHiNiNG ANd wear PrOTeCTiON industry Cod heading dies, ribbed ros, dies, mandres, drawing dies, gear cutters, etc. 12. TOO restoration SerViCe Re-grinding, re-coating, too management 109 885/10108-VIII-05 Printed in Germany superline Hightech toos with outstanding price-performance-ratio Priceist 04 New: now with Gu 500 dz din 3
GuHRING superline Superine is our high-tech too range for the foowing appications driing miing tapping futeess tapping reaming A S-toos exce thanks to their convincing cost-performance ratio, their outstanding quaity, their immediate avaiabiity and the customer friendy service for the entire duration of appication. Convincing cost-performance ratio SL-toos are produced in arge voumes on state-of-the-art, party Guhring deveoped, new precision grinding machines. The extreme productivity achieved with this manufacturing concept brings cost advantages that we fuy pass on to the customer. Add this to the guaranteed high SL quaity the customer receives a cost efficiency ratio that has no equa. Outstanding quaity SL quaity means highest accuracy and process reiabiity! We invest in state-of-the-art manufacturing processes to ISO 9001 as we as VDA 6.4 and provide our personne with intensive training. A SL toos are produced in utra fine Guhring carbide or carefuy seected high performance high speed stee. Add to this a majority coating with our we proven, versatie mutiayer FIRE coating or appication orientated surface finishes from bright to TiCN. The efficiency of too materia and coating compement the proven and tested cutting edge geometries. immediate avaiabiity The immediate avaiabiity of SL toos ex-stock is one of the corner stones for the success of this range. For you as a customer it means: Order today and appy tomorrow! For us as too manufacturer it means: Guaranteeing the sophisticated ogistics from raw materia via production to deivery. Put us to the test. SL toos are ready and avaiabe now. Customer friendy service We accompany our SL toos not ony up to the successfu sae and initia appication. We care for SL toos during the entire duration of their appication. First and foremost it incudes regrinding and recoating. Both these services are avaiabe from Guhring - with origina geometries and origina coatings. After a, who has more expertise for offering these services than the too manufacturer? Our coection service picks up the toos directy from your production and returns them there again. Or send them for refurbishing by courier and have them returned again by this method. In any case, SL toos are deivered to you after regrinding and recoating on schedue and in top SL quaity! 2
sl RaNGe summary S dris Summary Standard range GuhringNavigator page page page 4 13 54 S THreAd CuTTiNG TOOS Summary Standard range page page 6 59 S MiiNG CuTTerS Compass Summary Standard range GuhringNavigator page page page page 8 9 71 84 S reamers Summary Compass Standard range GuhringNavigator page page page page 12 12 89 93 S re-grinding ANd re-coating page 94 S PuS SPeCiA TOOS Standard range page 95 Conditions of sae and packaging detai No iabiity can be accepted for printing errors or technica changes of any kind. Our Conditions of Sae and Terms of Payment appy. Avaiabe on request. A products marked with, deviating from the dimensions isted in the cataogue, can be deivered, as ong as they are in conformity with the standard form. The standard forms are avaiabe at the Deutsches Institut für Normung e.v., 10787 Berin or at www.din.de. Too group Standard Units per package Soid carbide twist dris a standards and Guhring standards a sizes suppied 1 unit per package High speed stee twist dris 1897 338 7.5 mm packed in units of 10 > 7.5 10.6 mm bright packed in units of 5 > 7.5 10.6 mm TiN packed in units of 10 > 10.6 mm 1 unit per package 3 Ø 6,70 mm packed in units of 10 > Ø 6,70... Ø 10,60 mm packed in units of 5 > Ø 10,60 mm 1 unit per package High speed stee taps and futeess taps Soid carbide miing cutters and reamers 371, ~ 371 376, ~ 376 a standards and Guhring standards M6 packed in units of 10 > M6 1 unit per package a sizes suppied 1 unit per package 3
Twist dris Standard Too iustration Driing depth Too materia Shank design Diameter range Guhring no. Discount group Standard range, page ratio dris with oi feed RT 100 6537 K U 3 x D Soid carbide HA 3.00-20.00 5510 155 14 RT 100 6537 K U 3 x D Soid carbide HE 3.00-20.00 5610 155 14 RT 100 6537 L U 5 x D Soid carbide HA 3.00-20.00 5511 155 18 RT 100 6537 L U 5 x D Soid carbide HE 3.00-20.00 5611 155 18 Guhring RT 100 std. U 7 x D Soid carbide HA 3.00-20.00 5512 155 22 Guhring RT 100 std. U 7 x D Soid carbide HE 3.00-20.00 5612 155 22 Guhring RT 100 12 x D Soid std. carbide HA 3.00-20.00 5525 155 25 Guhring RT 150 std. GG 10 x D Soid carbide HA 3.00-16.00 5513 155 28 ratio dris without oi feed RT 100 6537 K U 3 x D Soid carbide HA 3.00-20.00 5514 155 30 RT 100 6537 K U 3 x D Soid carbide HE 3.00-20.00 5614 155 30 RT 100 6537 L U 5 x D Soid carbide HA 3.00-20.00 5515 155 34 RT 100 6537 L U 5 x D Soid carbide HE 3.00-20.00 5615 155 34 ratio dris 3-fute 6537 L FT 200 5 x D Soid carbide HA 3.00-20.00 5518 155 38 bright steam tempered nitrided 4
Twist dris Standard Too iustration Driing depth Too materia Shank design Diameter range Guhring no. Discount group Standard range, page Stub dris 1897 GU 500 DZ 3 x D HSCO 1.00-14.00 5524 159 1897 GU 500 DZ 3 x D HSCO 1.00-14.00 5520 159 1897 GT 500 DZ 3 x D HSS-e- PM 1.00-14.00 5521 159 6539 N 3 x D Soid carbide 2.00-12.00 5516 155 Jobber dris 338 GU 500 DZ 5 x D HSCO 1.00-14.00 5523 159 338 GU 500 DZ 5 x D HSCO 1.00-14.00 5519 159 338 GT 500 DZ 5 x D HSS-e- PM 1.00-14.00 5522 159 Guhring std. N 5 x D Soid carbide 2.00-12.00 5517 155 48 ong series twist dris 3 GU 500 DZ 10 x D HSCO 1,00-14,00 5536 159 50 3 GU 500 DZ 10 x D HSCO 1,00-14,00 5537 159 50 TiAN TiCN FIRE TiN 5
Taps Standard Form Toerance Too iustration Too materia Diameter range Guhring no. Discount group Standard range, page Machine taps for metric iso threads 371 N R C ISO 2 / 6H HSS-e 3.00-10.00 5554 156 60 371 N R C ISO 2 / 6H HSS-e 3.00-10.00 5592 156 60 371 H R C ISO 2 / 6H HSS-e 3.00-10.00 5552 156 60 371 H R C ISO 2 / 6H HSS-e 3.00-10.00 5591 156 60 371 VA R C ISO 2 / 6H HSS-e 3.00-10.00 5553 156 61 371 VA R C ISO 2 / 6H HSS-e 3.00-10.00 5596 156 61 371 N R C ISO 2 / 6H HSS-e 3.00-10.00 5555 156 61 371 N R C ISO 2 / 6H HSS-e 3.00-10.00 5594 156 61 371 A R C ISO 2 / 6H HSS-e 3.00-10.00 5551 156 61 376 N R C ISO 2 / 6H HSS-e 12.00-20.00 5589 156 62 371 H C ISO 2 / 6H IC M5 Soid carbide 4.00-10.00 5593 156 63 371 N B ISO 2 / 6H HSS-e 3.00-10.00 5560 156 64 371 N B ISO 2 / 6H HSS-e 3.00-10.00 5590 156 64 371 H B ISO 2 / 6H HSS-e 3.00-10.00 5558 156 64 371 H B ISO 2 / 6H HSS-e 3.00-10.00 5587 156 64 bright steam tempered nitrided 6
Taps Standard Form Toerance Too iustration Too materia Diameter range Guhring no. Discount group Standard range, page Machine taps for metric iso threads 371 VA B ISO 2 / 6H HSS-e- PM 3.00-10.00 5559 156 65 371 VA B ISO 2 / 6H HSS-e 3.00-10.00 5588 156 65 371 N B ISO 2 / 6H HSS-e 3.00-10.00 5561 156 65 371 N B ISO 2 / 6H HSS-e 3.00-10.00 5586 156 65 371 A B ISO 2 / 6H HSS-e 3.00-10.00 5557 156 66 371 GG C 6HX HSS-e 3.00-10.00 5550 156 66 371 GG C 6HX HSS-e 3.00-10.00 5595 156 66 376 N B ISO 2 / 6H HSS-e 12.00-20.00 5563 156 67 Futeess machine taps for metric iso threads ~ 371 N C 6HX HSS-e 3.00-10.00 5598 156 68 ~ 376 N C 6HX HSS-e 12.00-16.00 5599 156 69 expanation of coour-coding for S thread cutting and miing toos: Genera stees, i. e. structura stees, free-cutting stees, case hardened stees and unaoyed heat-treatabe stees High tensie stees, i. e. aoyed heat-treatabe stees, too stees and high speed stees Stainess and acid resistant stees, i. e., austenitic stainess stees, martensitic stainess stees, ferritic stees Universa, i. e. common structura stees, free-cutting stees, case hardened stees, unaoyed heat-treatabe stees, nitriding stees, spheroida graphite iron A and A-aoys Cast materias, i. e. cast iron, spheroida graphite and maeabe cast iron, compacted graphite iron Specia aoys, i. e. Ti and Ti-aoys, Ni-aoys (SL miing cutters) TiAN TiCN FIRE TiN 7
Compass Coour-ring designation p. 7 HA HB Guhring no. finish No. of futes Width of cut < 850 N/mm 2 850-1200 N/mm 2 < 750 N/mm 2 > 750 N/mm 2 < Si 3% Si 3%-12% < 850 N/mm 2 850-1200 N/mm 2 < 200 HB 30 > 200 HB 30 < 1000 N/mm 2 1000-1600 N/mm 2 < 54 HRC 5534 N 4 5735 5535 N 4 0.5 x D 5582 N 4 5505 NH 3 1 x D 5506 55 NH 3 5574 NH 3 0.1-0.2 x D 5504 Nrf 4 5583 Hr 4 0.5 x D 57 55 NH 6-10 5729 NH 6-8 0.02-0.05 x D 5730 5530 N 2 5549 N 2 55 w 2 1 x D 5507 5531 N 3 5573 N 3 5532 N 4 5556 N 4 0.1-0.2 x D 5585 5533 N 2 Depth of cut 5584 N 4 0.02-0.05 x D bright steam tempered optima suitabiity imited suitabiity 8
end mis Standard Shank design Too iustration Too materia Diameter range Guhring no. Discount group Standard range, page rf 100 u - ratio end mis Std. centre cutting 6527 K N HB Soid carbide 6.00-20.00 5534 157 72 6527 L N HA Soid carbide 4.00-25.00 5735 157 73 6527 L N HB Soid carbide 4.00-25.00 5535 157 73 Guhring std. N HA Soid carbide 10.00-25.00 5582 157 73 GH 100 u - sot dris (3-futed) centre cutting 6527 K NH HA Soid carbide 3.00-20.00 5505 157 74 6527 L NH HA Soid carbide 3.00-20.00 5506 157 75 6527 L NH HB Soid carbide 3.00-20.00 55 157 75 GH 100 u - Mini sot dris (3-futed) Guhring std. NH <Ø2.0 HA/HB Soid carbide 1.00-10.00 5574 157 75 GS 100 u - roughing end mis with fine teeth for materias < 48 HrC, cutting over centre 6527 L NRf HB Soid carbide 6.00-20.00 5504 157 76 GS 100 H - roughing end mis with fine teeth for materias < 56 HrC, cutting over centre 6527 L HR HB dk 500 uf 6.00-20.00 5583 157 76 TiAN TiCN FIRE TiN 9
end mis Standard Shank design Too iustration Too materia Diameter range Guhring no. Discount group Standard range, page GH 100 u - muti-tooth end mis for superfine finishing of materias < 50 HrC Guhring std. NH HA Soid carbide 3.00-25.00 57 157 77 Guhring std. NH HB Soid carbide 6.00-20.00 55 157 77 Guhring std. NH HA Soid carbide 6.00-20.00 5729 157 77 Sot dris (2-futed) centre cutting 6527 L N HA Soid carbide 2.00-12.00 5730 157 78 6527 L N HB Soid carbide 2.00-20.00 5530 157 78 x sot dris (2-futed) centre cutting Guhring std. N HA Soid carbide 3.00-20.00 5549 157 78 A sotting end mis (2-futed) centre cutting 6527 L W HB Soid carbide 3.00-20.00 55 157 79 Sot dris (3-futed) centre cutting 6527 L N HA Soid carbide 2.00-16.00 5507 157 79 6527 L N HB Soid carbide 2.00-20.00 5531 157 79 Mini sot dris (3-futed) centre cutting Guhring std. N <Ø2.0 HA/HB Soid carbide 0.50-20.00 5573 157 80 bright steam tempered nitrided 10
end mis Standard Shank design Too iustration Too materia Diameter range Guhring no. Discount group Standard range, page end mis (4-futed) centre cutting 6527 L N HB Soid carbide 2.00-20.00 5532 157 80 x end mis (4-futed) centre cutting Guhring std. N HA Soid carbide 3.00-20.00 5556 157 81 ba nose sot dris (2-futed) centre cutting 6527 L N HA Soid carbide 0.50-20.00 5585 157 82 6527 L N HB Soid carbide 4.00-12.00 5533 157 82 ba nose end mis (4-futed) centre cutting 6527 L N HB Soid carbide 3.00-20.00 5584 157 82 TiAN TiCN FIRE TiN 11
reamers Standard Form Too iustration Too materia Diameter range Guhring no. Discount group Standard range, page NC machine chucking reamers Guhring std. Soid carbide 0.98-12.05 5527 154 90 reaming recommendations for carbide NC reamers Through hoe or bind hoe Straight-futed reamers are generay appied in bind hoes as they, due to their cutting edge geometry, evacuate the chips from the hoe against the direction of the feed. Bind hoes can be machined with this too, if sufficient space at the bottom is avaiabe. interrupted hoes Spira reamers are preferred for the appication in interrupted hoes because the cutting edge geometry, in comparison to straight-futed toos, possesses a esser tendency of grabbing on the obique hoe. If the obique hoe is > 0.25 x D, spira reamers can aso be appied in bind hoes. Too materia Carbide grade finish Guhring no. Carbide k10 5527 Guhring std. finish: bright optimay suited optimay suited, if sufficient space at bottom of hoe Materia Hoe type Stock remova aowance standard High-aoyed and hardened stees < 52 HRC, cast materias such as GG10/GG20/GGG/ GGG50 Soft non-ferrous metas, i. e. auminium, brass etc. Through hoe Bind hoe Through hoe Bind hoe arge (0.5-0.6 mm) interrupted hoes standard arge (0.5-0.6 mm) interrupted hoes standard arge (0.5-0.6 mm) interrupted hoes standard interrupted hoes bright steam tempered 12
drills
ratio dris with oi feed S dris Guhring no. 5510 5610 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 62.00 20.00 36.00 3.100 6.000 62.00 20.00 36.00 1/8 3.170 6.000 62.00 20.00 36.00 3.200 6.000 62.00 20.00 36.00 3.250 6.000 62.00 20.00 36.00 3.300 6.000 62.00 20.00 36.00 3.0 6.000 62.00 20.00 36.00 3.500 6.000 62.00 20.00 36.00 9/64 3.570 6.000 62.00 20.00 36.00 3.600 6.000 62.00 20.00 36.00 3.700 6.000 62.00 20.00 36.00 3.800 6.000 66.00 24.00 36.00 3.900 6.000 66.00 24.00 36.00 5/32 3.970 6.000 66.00 24.00 36.00 4.000 6.000 66.00 24.00 36.00 4.100 6.000 66.00 24.00 36.00 4.200 6.000 66.00 24.00 36.00 4.300 6.000 66.00 24.00 36.00 11/64 4.370 6.000 66.00 24.00 36.00 4.0 6.000 66.00 24.00 36.00 4.500 6.000 66.00 24.00 36.00 4.600 6.000 66.00 24.00 36.00 4.650 6.000 66.00 24.00 36.00 4.700 6.000 66.00 24.00 36.00 3/16 4.760 6.000 66.00 28.00 36.00 4.800 6.000 66.00 28.00 36.00 4.900 6.000 66.00 28.00 36.00 5.000 6.000 66.00 28.00 36.00 5.100 6.000 66.00 28.00 36.00 13/64 5.160 6.000 66.00 28.00 36.00 5.200 6.000 66.00 28.00 36.00 5.300 6.000 66.00 28.00 36.00 5.0 6.000 66.00 28.00 36.00 5.500 6.000 66.00 28.00 36.00 5.550 6.000 66.00 28.00 36.00 7/32 5.560 6.000 66.00 28.00 36.00 Avaiabiity bright steam tempered nitrided 14
ratio dris with oi feed Guhring no. 5510 5610 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 t max = 2-1,5 x t max S dris 3 2 1 1 2 3 inch mm mm mm mm mm 5.600 6.000 66.00 28.00 36.00 5.700 6.000 66.00 28.00 36.00 5.800 6.000 66.00 28.00 36.00 5.900 6.000 66.00 28.00 36.00 15/64 5.950 6.000 66.00 28.00 36.00 6.000 6.000 66.00 28.00 36.00 6.100 8.000 79.00 34.00 36.00 6.200 8.000 79.00 34.00 36.00 6.300 8.000 79.00 34.00 36.00 1/4 6.350 8.000 79.00 34.00 36.00 6.0 8.000 79.00 34.00 36.00 6.500 8.000 79.00 34.00 36.00 6.600 8.000 79.00 34.00 36.00 6.700 8.000 79.00 34.00 36.00 17/64 6.750 8.000 79.00 34.00 36.00 6.800 8.000 79.00 34.00 36.00 6.900 8.000 79.00 34.00 36.00 7.000 8.000 79.00 34.00 36.00 7.100 8.000 79.00.00 36.00 9/32 7.1 8.000 79.00.00 36.00 7.200 8.000 79.00.00 36.00 7.300 8.000 79.00.00 36.00 7.0 8.000 79.00.00 36.00 7.500 8.000 79.00.00 36.00 19/64 7.5 8.000 79.00.00 36.00 7.600 8.000 79.00.00 36.00 7.700 8.000 79.00.00 36.00 7.800 8.000 79.00.00 36.00 7.900 8.000 79.00.00 36.00 5/16 7.9 8.000 79.00.00 36.00 8.000 8.000 79.00.00 36.00 8.100 10.000 89.00.00.00 8.200 10.000 89.00.00.00 8.300 10.000 89.00.00.00 21/64 8.330 10.000 89.00.00.00 8.0 10.000 89.00.00.00 Avaiabiity TiAN TiCN FIRE TiN 15
ratio dris with oi feed S dris Guhring no. 5510 5610 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 8.500 10.000 89.00.00.00 8.600 10.000 89.00.00.00 8.700 10.000 89.00.00.00 11/32 8.730 10.000 89.00.00.00 8.800 10.000 89.00.00.00 8.900 10.000 89.00.00.00 9.000 10.000 89.00.00.00 9.100 10.000 89.00.00.00 23/64 9.130 10.000 89.00.00.00 9.200 10.000 89.00.00.00 9.250 10.000 89.00.00.00 9.300 10.000 89.00.00.00 9.0 10.000 89.00.00.00 9.500 10.000 89.00.00.00 3/8 9.520 10.000 89.00.00.00 9.600 10.000 89.00.00.00 9.700 10.000 89.00.00.00 9.800 10.000 89.00.00.00 9.900 10.000 89.00.00.00 25/64 9.920 10.000 89.00.00.00 10.000 10.000 89.00.00.00 10.100 12.000 102.00 55.00.00 10.200 12.000 102.00 55.00.00 10.300 12.000 102.00 55.00.00 13/32 10.320 12.000 102.00 55.00.00 10.0 12.000 102.00 55.00.00 10.500 12.000 102.00 55.00.00 10.600 12.000 102.00 55.00.00 10.700 12.000 102.00 55.00.00 10.800 12.000 102.00 55.00.00 10.900 12.000 102.00 55.00.00 11.000 12.000 102.00 55.00.00 11.100 12.000 102.00 55.00.00 7/16 11.110 12.000 102.00 55.00.00 11.200 12.000 102.00 55.00.00 11.300 12.000 102.00 55.00.00 Avaiabiity bright steam tempered nitrided 16
ratio dris with oi feed Guhring no. 5510 5610 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 t max = 2-1,5 x t max S dris 3 2 1 1 2 3 inch mm mm mm mm mm 11.0 12.000 102.00 55.00.00 11.500 12.000 102.00 55.00.00 11.600 12.000 102.00 55.00.00 11.700 12.000 102.00 55.00.00 11.800 12.000 102.00 55.00.00 11.900 12.000 102.00 55.00.00 15/32 11.910 12.000 102.00 55.00.00 12.000 12.000 102.00 55.00.00 12.200 14.000 107.00 60.00.00 12.500 14.000 107.00 60.00.00 1/2 12.700 14.000 107.00 60.00.00 13.000 14.000 107.00 60.00.00 13.500 14.000 107.00 60.00.00 13.700 14.000 107.00 60.00.00 14.000 14.000 107.00 60.00.00 14.200 16.000 115.00 65.00 48.00 9/16 14.290 16.000 115.00 65.00 48.00 14.500 16.000 115.00 65.00 48.00 14.700 16.000 115.00 65.00 48.00 15.000 16.000 115.00 65.00 48.00 15.200 16.000 115.00 65.00 48.00 15.500 16.000 115.00 65.00 48.00 15.700 16.000 115.00 65.00 48.00 16.000 16.000 115.00 65.00 48.00 16.500 18.000 123.00 73.00 48.00 17.000 18.000 123.00 73.00 48.00 17.500 18.000 123.00 73.00 48.00 18.000 18.000 123.00 73.00 48.00 18.500 20.000 131.00 79.00 50.00 19.000 20.000 131.00 79.00 50.00 19.500 20.000 131.00 79.00 50.00 20.000 20.000 131.00 79.00 50.00 Avaiabiity TiAN TiCN FIRE TiN 17
ratio dris with oi feed S dris Guhring no. 5511 5611 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 66.00 28.00 36.00 3.100 6.000 66.00 28.00 36.00 1/8 3.170 6.000 66.00 28.00 36.00 3.200 6.000 66.00 28.00 36.00 3.250 6.000 66.00 28.00 36.00 3.300 6.000 66.00 28.00 36.00 3.0 6.000 66.00 28.00 36.00 3.500 6.000 66.00 28.00 36.00 9/64 3.570 6.000 66.00 28.00 36.00 3.600 6.000 66.00 28.00 36.00 3.700 6.000 66.00 28.00 36.00 3.800 6.000 74.00 36.00 36.00 3.900 6.000 74.00 36.00 36.00 5/32 3.970 6.000 74.00 36.00 36.00 4.000 6.000 74.00 36.00 36.00 4.100 6.000 74.00 36.00 36.00 4.200 6.000 74.00 36.00 36.00 4.300 6.000 74.00 36.00 36.00 11/64 4.370 6.000 74.00 36.00 36.00 4.0 6.000 74.00 36.00 36.00 4.500 6.000 74.00 36.00 36.00 4.600 6.000 74.00 36.00 36.00 4.650 6.000 74.00 36.00 36.00 4.700 6.000 74.00 36.00 36.00 3/16 4.760 6.000 82.00 44.00 36.00 4.800 6.000 82.00 44.00 36.00 4.900 6.000 82.00 44.00 36.00 5.000 6.000 82.00 44.00 36.00 5.100 6.000 82.00 44.00 36.00 13/64 5.160 6.000 82.00 44.00 36.00 5.200 6.000 82.00 44.00 36.00 5.300 6.000 82.00 44.00 36.00 5.0 6.000 82.00 44.00 36.00 5.500 6.000 82.00 44.00 36.00 5.550 6.000 82.00 44.00 36.00 7/32 5.560 6.000 82.00 44.00 36.00 Avaiabiity bright steam tempered nitrided 18
ratio dris with oi feed Guhring no. 5511 5611 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 t max = 2-1,5 x t max S dris 3 2 1 1 2 3 inch mm mm mm mm mm 5.600 6.000 82.00 44.00 36.00 5.700 6.000 82.00 44.00 36.00 5.800 6.000 82.00 44.00 36.00 5.900 6.000 82.00 44.00 36.00 15/64 5.950 6.000 82.00 44.00 36.00 6.000 6.000 82.00 44.00 36.00 6.100 8.000 91.00 53.00 36.00 6.200 8.000 91.00 53.00 36.00 6.300 8.000 91.00 53.00 36.00 1/4 6.350 8.000 91.00 53.00 36.00 6.0 8.000 91.00 53.00 36.00 6.500 8.000 91.00 53.00 36.00 6.600 8.000 91.00 53.00 36.00 6.700 8.000 91.00 53.00 36.00 17/64 6.750 8.000 91.00 53.00 36.00 6.800 8.000 91.00 53.00 36.00 6.900 8.000 91.00 53.00 36.00 7.000 8.000 91.00 53.00 36.00 7.100 8.000 91.00 53.00 36.00 9/32 7.1 8.000 91.00 53.00 36.00 7.200 8.000 91.00 53.00 36.00 7.300 8.000 91.00 53.00 36.00 7.0 8.000 91.00 53.00 36.00 7.500 8.000 91.00 53.00 36.00 19/64 7.5 8.000 91.00 53.00 36.00 7.600 8.000 91.00 53.00 36.00 7.700 8.000 91.00 53.00 36.00 7.800 8.000 91.00 53.00 36.00 7.900 8.000 91.00 53.00 36.00 5/16 7.9 8.000 91.00 53.00 36.00 8.000 8.000 91.00 53.00 36.00 8.100 10.000 103.00 61.00.00 8.200 10.000 103.00 61.00.00 8.300 10.000 103.00 61.00.00 21/64 8.330 10.000 103.00 61.00.00 8.0 10.000 103.00 61.00.00 Avaiabiity TiAN TiCN FIRE TiN 19
ratio dris with oi feed S dris Guhring no. 5511 5611 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 8.500 10.000 103.00 61.00.00 8.600 10.000 103.00 61.00.00 8.700 10.000 103.00 61.00.00 11/32 8.730 10.000 103.00 61.00.00 8.800 10.000 103.00 61.00.00 8.900 10.000 103.00 61.00.00 9.000 10.000 103.00 61.00.00 9.100 10.000 103.00 61.00.00 23/64 9.130 10.000 103.00 61.00.00 9.200 10.000 103.00 61.00.00 9.250 10.000 103.00 61.00.00 9.300 10.000 103.00 61.00.00 9.0 10.000 103.00 61.00.00 9.500 10.000 103.00 61.00.00 3/8 9.520 10.000 103.00 61.00.00 9.600 10.000 103.00 61.00.00 9.700 10.000 103.00 61.00.00 9.800 10.000 103.00 61.00.00 9.900 10.000 103.00 61.00.00 25/64 9.920 10.000 103.00 61.00.00 10.000 10.000 103.00 61.00.00 10.100 12.000 118.00 71.00.00 10.200 12.000 118.00 71.00.00 10.300 12.000 118.00 71.00.00 13/32 10.320 12.000 118.00 71.00.00 10.0 12.000 118.00 71.00.00 10.500 12.000 118.00 71.00.00 10.600 12.000 118.00 71.00.00 10.700 12.000 118.00 71.00.00 10.800 12.000 118.00 71.00.00 10.900 12.000 118.00 71.00.00 11.000 12.000 118.00 71.00.00 11.100 12.000 118.00 71.00.00 7/16 11.110 12.000 118.00 71.00.00 11.200 12.000 118.00 71.00.00 11.300 12.000 118.00 71.00.00 Avaiabiity bright steam tempered nitrided 20
ratio dris with oi feed Guhring no. 5511 5611 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 t max = 2-1,5 x t max S dris 3 2 1 1 2 3 inch mm mm mm mm mm 11.0 12.000 118.00 71.00.00 11.500 12.000 118.00 71.00.00 11.600 12.000 118.00 71.00.00 11.700 12.000 118.00 71.00.00 11.800 12.000 118.00 71.00.00 11.900 12.000 118.00 71.00.00 15/32 11.910 12.000 118.00 71.00.00 12.000 12.000 118.00 71.00.00 12.200 14.000 124.00 77.00.00 12.500 14.000 124.00 77.00.00 1/2 12.700 14.000 124.00 77.00.00 13.000 14.000 124.00 77.00.00 13.500 14.000 124.00 77.00.00 13.700 14.000 124.00 77.00.00 14.000 14.000 124.00 77.00.00 14.200 16.000 133.00 83.00 48.00 9/16 14.290 16.000 133.00 83.00 48.00 14.500 16.000 133.00 83.00 48.00 14.700 16.000 133.00 83.00 48.00 15.000 16.000 133.00 83.00 48.00 15.200 16.000 133.00 83.00 48.00 15.500 16.000 133.00 83.00 48.00 15.700 16.000 133.00 83.00 48.00 16.000 16.000 133.00 83.00 48.00 16.500 18.000 1.00 93.00 48.00 17.000 18.000 1.00 93.00 48.00 17.500 18.000 1.00 93.00 48.00 18.000 18.000 1.00 93.00 48.00 18.500 20.000 153.00 101.00 50.00 19.000 20.000 153.00 101.00 50.00 3/4 19.050 20.000 153.00 101.00 50.00 19.500 20.000 153.00 101.00 50.00 20.000 20.000 153.00 101.00 50.00 Avaiabiity TiAN TiCN FIRE TiN 21
ratio dris with oi feed S dris Guhring no. 5512 5612 Standard Guhring std. Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 7 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 70.00 30.00 36.00 3.100 6.000 70.00 30.00 36.00 1/8 3.170 6.000 70.00 30.00 36.00 3.200 6.000 70.00 30.00 36.00 3.250 6.000 70.00 30.00 36.00 3.300 6.000 70.00 30.00 36.00 3.0 6.000 75.00 35.50 36.00 3.500 6.000 75.00 35.50 36.00 9/64 3.570 6.000 75.00 35.50 36.00 3.600 6.000 75.00 35.50 36.00 3.700 6.000 75.00 35.50 36.00 3.800 6.000 75.00 37.50 36.00 3.900 6.000 75.00 37.50 36.00 5/32 3.970 6.000 75.00 37.50 36.00 4.000 6.000 75.00 37.50 36.00 4.100 6.000 75.00 37.50 36.00 4.200 6.000 75.00 37.50 36.00 4.300 6.000 85.00.00 36.00 11/64 4.370 6.000 85.00.00 36.00 4.0 6.000 85.00.00 36.00 4.500 6.000 85.00.00 36.00 4.600 6.000 85.00.00 36.00 4.650 6.000 85.00.00 36.00 4.700 6.000 85.00.00 36.00 3/16 4.760 6.000 90.00 50.00 36.00 4.800 6.000 90.00 50.00 36.00 4.900 6.000 90.00 50.00 36.00 5.000 6.000 90.00 50.00 36.00 5.100 6.000 90.00 50.00 36.00 13/64 5.160 6.000 90.00 50.00 36.00 5.200 6.000 90.00 50.00 36.00 5.300 6.000 90.00 50.00 36.00 5.0 6.000 97.00 57.00 36.00 5.500 6.000 97.00 57.00 36.00 5.700 6.000 97.00 57.00 36.00 5.800 6.000 97.00 57.00 36.00 Avaiabiity bright steam tempered nitrided 22
ratio dris with oi feed Guhring no. 5512 5612 Standard Guhring std. Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 7 x d Toerance m7 discount group 155 t max = 2-1,5 x t max S dris 3 2 1 1 2 3 inch mm mm mm mm mm 5.900 6.000 97.00 57.00 36.00 6.000 6.000 97.00 57.00 36.00 6.200 8.000 106.00 66.00 36.00 6.300 8.000 106.00 66.00 36.00 1/4 6.350 8.000 106.00 66.00 36.00 6.500 8.000 106.00 66.00 36.00 6.600 8.000 106.00 66.00 36.00 6.700 8.000 106.00 66.00 36.00 6.800 8.000 106.00 66.00 36.00 6.900 8.000 116.00 76.00 36.00 7.000 8.000 116.00 76.00 36.00 7.100 8.000 116.00 76.00 36.00 7.200 8.000 116.00 76.00 36.00 7.500 8.000 116.00 76.00 36.00 7.600 8.000 116.00 76.00 36.00 7.700 8.000 116.00 76.00 36.00 7.800 8.000 116.00 76.00 36.00 8.000 8.000 116.00 76.00 36.00 8.100 10.000 131.00 87.00.00 8.200 10.000 131.00 87.00.00 8.0 10.000 131.00 87.00.00 8.500 10.000 131.00 87.00.00 8.600 10.000 131.00 87.00.00 8.700 10.000 131.00 87.00.00 8.800 10.000 131.00 87.00.00 9.000 10.000 131.00 87.00.00 9.100 10.000 139.00 95.00.00 9.200 10.000 139.00 95.00.00 9.300 10.000 139.00 95.00.00 9.0 10.000 139.00 95.00.00 9.500 10.000 139.00 95.00.00 3/8 9.520 10.000 139.00 95.00.00 9.700 10.000 139.00 95.00.00 9.800 10.000 139.00 95.00.00 9.900 10.000 139.00 95.00.00 10.000 10.000 139.00 95.00.00 Avaiabiity TiAN TiCN FIRE TiN 23
ratio dris with oi feed S dris Guhring no. 5512 5612 Standard Guhring std. Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 7 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 10.200 12.000 155.00 106.00.00 10.500 12.000 155.00 106.00.00 10.800 12.000 155.00 106.00.00 11.000 12.000 155.00 106.00.00 11.200 12.000 163.00 114.00.00 11.500 12.000 163.00 114.00.00 11.800 12.000 163.00 114.00.00 12.000 12.000 163.00 114.00.00 12.200 14.000 182.00 133.00.00 12.500 14.000 182.00 133.00.00 1/2 12.700 14.000 182.00 133.00.00 13.000 14.000 182.00 133.00.00 13.500 14.000 182.00 133.00.00 14.000 14.000 182.00 133.00.00 14.200 16.000 204.00 152.00 48.00 14.500 16.000 204.00 152.00 48.00 15.000 16.000 204.00 152.00 48.00 15.500 16.000 204.00 152.00 48.00 16.000 16.000 204.00 152.00 48.00 16.500 18.000 223.00 171.00 48.00 17.000 18.000 223.00 171.00 48.00 17.500 18.000 223.00 171.00 48.00 18.000 18.000 223.00 171.00 48.00 18.500 20.000 244.00 190.00 50.00 19.000 20.000 244.00 190.00 50.00 3/4 19.050 20.000 244.00 190.00 50.00 19.500 20.000 244.00 190.00 50.00 20.000 20.000 244.00 190.00 50.00 Avaiabiity bright steam tempered nitrided 24
ratio dris with oi feed Guhring no. 5525 Standard Guhring std. Too materia Soid carbide Carbide grade k / P rt 100 Shank design HA driing depth 12 x d Toerance m7 discount group 155 S dris t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 90.00 50.00 36.00 3.100 6.000 90.00 50.00 36.00 3.170 6.000 90.00 50.00 36.00 3.200 6.000 90.00 50.00 36.00 3.300 6.000 90.00 50.00 36.00 3.0 6.000 90.00 50.00 36.00 3.500 6.000 90.00 50.00 36.00 3.600 6.000 90.00 50.00 36.00 3.700 6.000 90.00 50.00 36.00 3.800 6.000 102.00 64.00 36.00 3.900 6.000 102.00 64.00 36.00 4.000 6.000 102.00 64.00 36.00 4.100 6.000 102.00 64.00 36.00 4.200 6.000 102.00 64.00 36.00 4.300 6.000 102.00 64.00 36.00 4.0 6.000 102.00 64.00 36.00 4.500 6.000 102.00 64.00 36.00 4.600 6.000 102.00 64.00 36.00 4.700 6.000 102.00 64.00 36.00 4.800 6.000 116.00 78.00 36.00 4.900 6.000 116.00 78.00 36.00 5.000 6.000 116.00 78.00 36.00 5.100 6.000 116.00 78.00 36.00 5.200 6.000 116.00 78.00 36.00 5.300 6.000 116.00 78.00 36.00 5.0 6.000 116.00 78.00 36.00 5.500 6.000 116.00 78.00 36.00 5.600 6.000 116.00 78.00 36.00 5.700 6.000 116.00 78.00 36.00 5.800 6.000 116.00 78.00 36.00 5.900 6.000 116.00 78.00 36.00 6.000 6.000 116.00 78.00 36.00 6.100 8.000 1.00 108.00 36.00 6.200 8.000 1.00 108.00 36.00 6.300 8.000 1.00 108.00 36.00 1/4 6.350 8.000 1.00 108.00 36.00 Avaiabiity TiAN TiCN FIRE TiN 25
ratio dris with oi feed Guhring no. 5525 S dris Standard Guhring std. Too materia Soid carbide Carbide grade k / P rt 100 Shank design HA driing depth 12 x d Toerance m7 discount group 155 t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 6.0 8.000 1.00 108.00 36.00 6.500 8.000 1.00 108.00 36.00 6.600 8.000 1.00 108.00 36.00 6.700 8.000 1.00 108.00 36.00 6.800 8.000 1.00 108.00 36.00 6.900 8.000 1.00 108.00 36.00 7.000 8.000 1.00 108.00 36.00 7.100 8.000 1.00 108.00 36.00 7.200 8.000 1.00 108.00 36.00 7.300 8.000 1.00 108.00 36.00 7.0 8.000 1.00 108.00 36.00 7.500 8.000 1.00 108.00 36.00 7.600 8.000 1.00 108.00 36.00 7.700 8.000 1.00 108.00 36.00 7.800 8.000 1.00 108.00 36.00 7.900 8.000 1.00 108.00 36.00 8.000 8.000 1.00 108.00 36.00 8.100 10.000 162.00 120.00.00 8.200 10.000 162.00 120.00.00 8.300 10.000 162.00 120.00.00 8.0 10.000 162.00 120.00.00 8.500 10.000 162.00 120.00.00 8.600 10.000 162.00 120.00.00 8.700 10.000 162.00 120.00.00 8.800 10.000 162.00 120.00.00 8.900 10.000 162.00 120.00.00 9.000 10.000 162.00 120.00.00 9.100 10.000 162.00 120.00.00 9.200 10.000 162.00 120.00.00 9.300 10.000 162.00 120.00.00 9.0 10.000 162.00 120.00.00 9.500 10.000 162.00 120.00.00 3/8 9.520 10.000 162.00 120.00.00 9.600 10.000 162.00 120.00.00 9.700 10.000 162.00 120.00.00 9.800 10.000 162.00 120.00.00 Avaiabiity bright steam tempered nitrided 26
ratio dris with oi feed Guhring no. 5525 Standard Guhring std. Too materia Soid carbide Carbide grade k / P rt 100 Shank design HA driing depth 12 x d Toerance m7 discount group 155 S dris t max = 2-1,5 x t max 3 2 1 1 2 3 inch mm mm mm mm mm 9.900 10.000 162.00 120.00.00 10.000 10.000 162.00 120.00.00 10.200 12.000 204.00 156.00.00 10.500 12.000 204.00 156.00.00 11.000 12.000 204.00 156.00.00 11.500 12.000 204.00 156.00.00 12.000 12.000 204.00 156.00.00 12.500 14.000 230.00 182.00.00 1/2 12.700 14.000 230.00 182.00.00 13.000 14.000 230.00 182.00.00 13.500 14.000 230.00 182.00.00 14.000 14.000 230.00 182.00.00 14.500 16.000 260.00 208.00 48.00 15.000 16.000 260.00 208.00 48.00 15.500 16.000 260.00 208.00 48.00 16.000 16.000 260.00 208.00 48.00 16.500 18.000 285.00 234.00 48.00 17.000 18.000 285.00 234.00 48.00 17.500 18.000 285.00 234.00 48.00 18.000 18.000 285.00 234.00 48.00 18.500 20.000 310.00 258.00 50.00 19.000 20.000 310.00 258.00 50.00 3/4 19.050 20.000 310.00 258.00 50.00 19.500 20.000 310.00 258.00 50.00 20.000 20.000 310.00 258.00 50.00 Avaiabiity TiAN TiCN FIRE TiN 27
ratio dris with oi feed Guhring no. 5513 S dris Standard Guhring std. Too materia Soid carbide Carbide grade k rt 150 GG Shank design HA driing depth 10 x d Toerance m7 discount group 155 t max = 2-1,5 x t d 2 d 1 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 91.00.00 36.00 1/8 3.170 6.000 91.00.00 36.00 3.250 6.000 91.00.00 36.00 3.300 6.000 91.00.00 36.00 3.500 6.000 91.00 48.00 36.00 9/64 3.570 6.000 91.00 48.00 36.00 3.800 6.000 121.00 77.00 36.00 5/32 3.970 6.000 121.00 77.00 36.00 4.000 6.000 121.00 77.00 36.00 4.200 6.000 121.00 77.00 36.00 4.500 6.000 121.00 77.00 36.00 5.000 6.000 121.00 82.00 36.00 5.500 6.000 121.00 82.00 36.00 6.000 6.000 121.00 82.00 36.00 1/4 6.350 8.000 1.00 106.00 36.00 6.500 8.000 1.00 106.00 36.00 6.800 8.000 1.00 106.00 36.00 7.000 8.000 1.00 106.00 36.00 7.500 8.000 1.00 106.00 36.00 7.800 8.000 1.00 106.00 36.00 8.000 8.000 1.00 106.00 36.00 8.500 10.000 175.00 130.00.00 9.000 10.000 175.00 130.00.00 9.500 10.000 175.00 130.00.00 3/8 9.520 10.000 175.00 130.00.00 10.000 10.000 175.00 130.00.00 10.200 12.000 209.00 159.00.00 10.500 12.000 209.00 159.00.00 11.000 12.000 209.00 159.00.00 11.500 12.000 209.00 159.00.00 12.000 12.000 209.00 159.00.00 12.500 14.000 233.00 183.00.00 1/2 12.700 14.000 233.00 183.00.00 13.000 14.000 233.00 183.00.00 13.500 14.000 233.00 183.00.00 14.000 14.000 233.00 183.00.00 Avaiabiity bright steam tempered nitrided 28
ratio dris with oi feed Guhring no. 5513 Standard Guhring std. Too materia Soid carbide Carbide grade k rt 150 GG Shank design HA driing depth 10 x d Toerance m7 discount group 155 S dris t max = 2-1,5 x t d 2 d 1 3 2 1 1 2 3 inch mm mm mm mm mm 14.500 16.000 260.00 207.00 48.00 15.000 16.000 260.00 207.00 48.00 15.500 16.000 260.00 207.00 48.00 16.000 16.000 260.00 207.00 48.00 Avaiabiity TiAN TiCN FIRE TiN 29
ratio dris without oi feed S dris Guhring no. 5514 5614 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 62.00 20.00 36.00 3.100 6.000 62.00 20.00 36.00 1/8 3.170 6.000 62.00 20.00 36.00 3.200 6.000 62.00 20.00 36.00 3.250 6.000 62.00 20.00 36.00 3.300 6.000 62.00 20.00 36.00 3.0 6.000 62.00 20.00 36.00 3.500 6.000 62.00 20.00 36.00 9/64 3.570 6.000 62.00 20.00 36.00 3.600 6.000 62.00 20.00 36.00 3.700 6.000 62.00 20.00 36.00 3.800 6.000 66.00 24.00 36.00 3.900 6.000 66.00 24.00 36.00 5/32 3.970 6.000 66.00 24.00 36.00 4.000 6.000 66.00 24.00 36.00 4.100 6.000 66.00 24.00 36.00 4.200 6.000 66.00 24.00 36.00 4.300 6.000 66.00 24.00 36.00 11/64 4.370 6.000 66.00 24.00 36.00 4.0 6.000 66.00 24.00 36.00 4.500 6.000 66.00 24.00 36.00 4.600 6.000 66.00 24.00 36.00 4.650 6.000 66.00 24.00 36.00 4.700 6.000 66.00 24.00 36.00 3/16 4.760 6.000 66.00 28.00 36.00 4.800 6.000 66.00 28.00 36.00 4.900 6.000 66.00 28.00 36.00 5.000 6.000 66.00 28.00 36.00 5.100 6.000 66.00 28.00 36.00 13/64 5.160 6.000 66.00 28.00 36.00 5.200 6.000 66.00 28.00 36.00 5.300 6.000 66.00 28.00 36.00 5.0 6.000 66.00 28.00 36.00 5.500 6.000 66.00 28.00 36.00 5.550 6.000 66.00 28.00 36.00 7/32 5.560 6.000 66.00 28.00 36.00 Avaiabiity bright steam tempered nitrided 30
ratio dris without oi feed Guhring no. 5514 5614 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 S dris 3 2 1 1 2 3 inch mm mm mm mm mm 5.600 6.000 66.00 28.00 36.00 5.700 6.000 66.00 28.00 36.00 5.800 6.000 66.00 28.00 36.00 5.900 6.000 66.00 28.00 36.00 15/64 5.950 6.000 66.00 28.00 36.00 6.000 6.000 66.00 28.00 36.00 6.100 8.000 79.00 34.00 36.00 6.200 8.000 79.00 34.00 36.00 6.300 8.000 79.00 34.00 36.00 1/4 6.350 8.000 79.00 34.00 36.00 6.0 8.000 79.00 34.00 36.00 6.500 8.000 79.00 34.00 36.00 6.600 8.000 79.00 34.00 36.00 6.700 8.000 79.00 34.00 36.00 17/64 6.750 8.000 79.00 34.00 36.00 6.800 8.000 79.00 34.00 36.00 6.900 8.000 79.00 34.00 36.00 7.000 8.000 79.00 34.00 36.00 7.100 8.000 79.00.00 36.00 9/32 7.1 8.000 79.00.00 36.00 7.200 8.000 79.00.00 36.00 7.300 8.000 79.00.00 36.00 7.0 8.000 79.00.00 36.00 7.500 8.000 79.00.00 36.00 19/64 7.5 8.000 79.00.00 36.00 7.600 8.000 79.00.00 36.00 7.700 8.000 79.00.00 36.00 7.800 8.000 79.00.00 36.00 7.900 8.000 79.00.00 36.00 5/16 7.9 8.000 79.00.00 36.00 8.000 8.000 79.00.00 36.00 8.100 10.000 89.00.00.00 8.200 10.000 89.00.00.00 8.300 10.000 89.00.00.00 21/64 8.330 10.000 89.00.00.00 8.0 10.000 89.00.00.00 Avaiabiity TiAN TiCN FIRE TiN 31
ratio dris without oi feed S dris Guhring no. 5514 5614 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 3 2 1 1 2 3 inch mm mm mm mm mm 8.500 10.000 89.00.00.00 8.600 10.000 89.00.00.00 8.700 10.000 89.00.00.00 11/32 8.730 10.000 89.00.00.00 8.800 10.000 89.00.00.00 8.900 10.000 89.00.00.00 9.000 10.000 89.00.00.00 9.100 10.000 89.00.00.00 23/64 9.130 10.000 89.00.00.00 9.200 10.000 89.00.00.00 9.250 10.000 89.00.00.00 9.300 10.000 89.00.00.00 9.0 10.000 89.00.00.00 9.500 10.000 89.00.00.00 3/8 9.520 10.000 89.00.00.00 9.600 10.000 89.00.00.00 9.700 10.000 89.00.00.00 9.800 10.000 89.00.00.00 9.900 10.000 89.00.00.00 25/64 9.920 10.000 89.00.00.00 10.000 10.000 89.00.00.00 10.100 12.000 102.00 55.00.00 10.200 12.000 102.00 55.00.00 10.300 12.000 102.00 55.00.00 13/32 10.320 12.000 102.00 55.00.00 10.0 12.000 102.00 55.00.00 10.500 12.000 102.00 55.00.00 10.600 12.000 102.00 55.00.00 10.700 12.000 102.00 55.00.00 10.800 12.000 102.00 55.00.00 10.900 12.000 102.00 55.00.00 11.000 12.000 102.00 55.00.00 11.100 12.000 102.00 55.00.00 7/16 11.110 12.000 102.00 55.00.00 11.200 12.000 102.00 55.00.00 11.300 12.000 102.00 55.00.00 Avaiabiity bright steam tempered nitrided 32
ratio dris without oi feed Guhring no. 5514 5614 Standard din 6537 k Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 3 x d Toerance m7 discount group 155 S dris 3 2 1 1 2 3 inch mm mm mm mm mm 11.0 12.000 102.00 55.00.00 11.500 12.000 102.00 55.00.00 11.600 12.000 102.00 55.00.00 11.700 12.000 102.00 55.00.00 11.800 12.000 102.00 55.00.00 11.900 12.000 102.00 55.00.00 15/32 11.910 12.000 102.00 55.00.00 12.000 12.000 102.00 55.00.00 12.200 14.000 107.00 60.00.00 12.500 14.000 107.00 60.00.00 1/2 12.700 14.000 107.00 60.00.00 13.000 14.000 107.00 60.00.00 13.500 14.000 107.00 60.00.00 13.700 14.000 107.00 60.00.00 14.000 14.000 107.00 60.00.00 14.200 16.000 115.00 65.00 48.00 9/16 14.290 16.000 115.00 65.00 48.00 14.500 16.000 115.00 65.00 48.00 14.700 16.000 115.00 65.00 48.00 15.000 16.000 115.00 65.00 48.00 15.200 16.000 115.00 65.00 48.00 15.500 16.000 115.00 65.00 48.00 15.700 16.000 115.00 65.00 48.00 16.000 16.000 115.00 65.00 48.00 16.500 18.000 123.00 73.00 48.00 17.000 18.000 123.00 73.00 48.00 17.500 18.000 123.00 73.00 48.00 18.000 18.000 123.00 73.00 48.00 18.500 20.000 131.00 79.00 50.00 19.000 20.000 131.00 79.00 50.00 19.500 20.000 131.00 79.00 50.00 20.000 20.000 131.00 79.00 50.00 Avaiabiity TiAN TiCN FIRE TiN 33
ratio dris without oi feed S dris Guhring no. 5515 5615 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 66.00 28.00 36.00 3.100 6.000 66.00 28.00 36.00 1/8 3.170 6.000 66.00 28.00 36.00 3.200 6.000 66.00 28.00 36.00 3.250 6.000 66.00 28.00 36.00 3.300 6.000 66.00 28.00 36.00 3.0 6.000 66.00 28.00 36.00 3.500 6.000 66.00 28.00 36.00 9/64 3.570 6.000 66.00 28.00 36.00 3.600 6.000 66.00 28.00 36.00 3.700 6.000 66.00 28.00 36.00 3.800 6.000 74.00 36.00 36.00 3.900 6.000 74.00 36.00 36.00 5/32 3.970 6.000 74.00 36.00 36.00 4.000 6.000 74.00 36.00 36.00 4.100 6.000 74.00 36.00 36.00 4.200 6.000 74.00 36.00 36.00 4.300 6.000 74.00 36.00 36.00 11/64 4.370 6.000 74.00 36.00 36.00 4.0 6.000 74.00 36.00 36.00 4.500 6.000 74.00 36.00 36.00 4.600 6.000 74.00 36.00 36.00 4.650 6.000 74.00 36.00 36.00 4.700 6.000 74.00 36.00 36.00 3/16 4.760 6.000 82.00 44.00 36.00 4.800 6.000 82.00 44.00 36.00 4.900 6.000 82.00 44.00 36.00 5.000 6.000 82.00 44.00 36.00 5.100 6.000 82.00 44.00 36.00 13/64 5.160 6.000 82.00 44.00 36.00 5.200 6.000 82.00 44.00 36.00 5.300 6.000 82.00 44.00 36.00 5.0 6.000 82.00 44.00 36.00 5.500 6.000 82.00 44.00 36.00 5.550 6.000 82.00 44.00 36.00 7/32 5.560 6.000 82.00 44.00 36.00 Avaiabiity bright steam tempered nitrided 34
ratio dris without oi feed Guhring no. 5515 5615 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 S dris 3 2 1 1 2 3 inch mm mm mm mm mm 5.600 6.000 82.00 44.00 36.00 5.700 6.000 82.00 44.00 36.00 5.800 6.000 82.00 44.00 36.00 5.900 6.000 82.00 44.00 36.00 15/64 5.950 6.000 82.00 44.00 36.00 6.000 6.000 82.00 44.00 36.00 6.100 8.000 91.00 53.00 36.00 6.200 8.000 91.00 53.00 36.00 6.300 8.000 91.00 53.00 36.00 1/4 6.350 8.000 91.00 53.00 36.00 6.0 8.000 91.00 53.00 36.00 6.500 8.000 91.00 53.00 36.00 6.600 8.000 91.00 53.00 36.00 6.700 8.000 91.00 53.00 36.00 17/64 6.750 8.000 91.00 53.00 36.00 6.800 8.000 91.00 53.00 36.00 6.900 8.000 91.00 53.00 36.00 7.000 8.000 91.00 53.00 36.00 7.100 8.000 91.00 53.00 36.00 9/32 7.1 8.000 91.00 53.00 36.00 7.200 8.000 91.00 53.00 36.00 7.300 8.000 91.00 53.00 36.00 7.0 8.000 91.00 53.00 36.00 7.500 8.000 91.00 53.00 36.00 19/64 7.5 8.000 91.00 53.00 36.00 7.600 8.000 91.00 53.00 36.00 7.700 8.000 91.00 53.00 36.00 7.800 8.000 91.00 53.00 36.00 7.900 8.000 91.00 53.00 36.00 5/16 7.9 8.000 91.00 53.00 36.00 8.000 8.000 91.00 53.00 36.00 8.100 10.000 103.00 61.00.00 8.200 10.000 103.00 61.00.00 8.300 10.000 103.00 61.00.00 21/64 8.330 10.000 103.00 61.00.00 8.0 10.000 103.00 61.00.00 Avaiabiity TiAN TiCN FIRE TiN 35
ratio dris without oi feed S dris Guhring no. 5515 5615 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 3 2 1 1 2 3 inch mm mm mm mm mm 8.500 10.000 103.00 61.00.00 8.600 10.000 103.00 61.00.00 8.700 10.000 103.00 61.00.00 11/32 8.730 10.000 103.00 61.00.00 8.800 10.000 103.00 61.00.00 8.900 10.000 103.00 61.00.00 9.000 10.000 103.00 61.00.00 9.100 10.000 103.00 61.00.00 23/64 9.130 10.000 103.00 61.00.00 9.200 10.000 103.00 61.00.00 9.250 10.000 103.00 61.00.00 9.300 10.000 103.00 61.00.00 9.0 10.000 103.00 61.00.00 9.500 10.000 103.00 61.00.00 3/8 9.520 10.000 103.00 61.00.00 9.600 10.000 103.00 61.00.00 9.700 10.000 103.00 61.00.00 9.800 10.000 103.00 61.00.00 9.900 10.000 103.00 61.00.00 25/64 9.920 10.000 103.00 61.00.00 10.000 10.000 103.00 61.00.00 10.100 12.000 118.00 71.00.00 10.200 12.000 118.00 71.00.00 10.300 12.000 118.00 71.00.00 13/32 10.320 12.000 118.00 71.00.00 10.0 12.000 118.00 71.00.00 10.500 12.000 118.00 71.00.00 10.600 12.000 118.00 71.00.00 10.700 12.000 118.00 71.00.00 10.800 12.000 118.00 71.00.00 10.900 12.000 118.00 71.00.00 11.000 12.000 118.00 71.00.00 11.100 12.000 118.00 71.00.00 7/16 11.110 12.000 118.00 71.00.00 11.200 12.000 118.00 71.00.00 11.300 12.000 118.00 71.00.00 Avaiabiity bright steam tempered nitrided 36
ratio dris without oi feed Guhring no. 5515 5615 Standard din 6537 Too materia Soid carbide Carbide grade k / P rt 100 u Shank design HA He driing depth 5 x d Toerance m7 discount group 155 S dris 3 2 1 1 2 3 inch mm mm mm mm mm 11.0 12.000 118.00 71.00.00 11.500 12.000 118.00 71.00.00 11.600 12.000 118.00 71.00.00 11.700 12.000 118.00 71.00.00 11.800 12.000 118.00 71.00.00 11.900 12.000 118.00 71.00.00 15/32 11.910 12.000 118.00 71.00.00 12.000 12.000 118.00 71.00.00 12.200 14.000 124.00 77.00.00 12.500 14.000 124.00 77.00.00 1/2 12.700 14.000 124.00 77.00.00 13.000 14.000 124.00 77.00.00 13.500 14.000 124.00 77.00.00 13.700 14.000 124.00 77.00.00 14.000 14.000 124.00 77.00.00 14.200 16.000 133.00 83.00 48.00 9/16 14.290 16.000 133.00 83.00 48.00 14.500 16.000 133.00 83.00 48.00 14.700 16.000 133.00 83.00 48.00 15.000 16.000 133.00 83.00 48.00 15.200 16.000 133.00 83.00 48.00 15.500 16.000 133.00 83.00 48.00 15.700 16.000 133.00 83.00 48.00 16.000 16.000 133.00 83.00 48.00 16.500 18.000 1.00 93.00 48.00 17.000 18.000 1.00 93.00 48.00 17.500 18.000 1.00 93.00 48.00 18.000 18.000 1.00 93.00 48.00 18.500 20.000 153.00 101.00 50.00 19.000 20.000 153.00 101.00 50.00 19.500 20.000 153.00 101.00 50.00 20.000 20.000 153.00 101.00 50.00 Avaiabiity TiAN TiCN FIRE TiN 37
ratio dris 3-fute Guhring no. 5518 S dris Standard din 6537 Too materia Soid carbide Carbide grade k FT 200 Shank design HA driing depth 5 x d Toerance m7 discount group 155 t max = 2-1,5 x t max d 2 d 1 3 2 1 1 2 3 inch mm mm mm mm mm 3.000 6.000 66.00 28.00 36.00 3.100 6.000 66.00 28.00 36.00 3.200 6.000 66.00 28.00 36.00 3.300 6.000 66.00 28.00 36.00 3.500 6.000 66.00 28.00 36.00 3.700 6.000 66.00 28.00 36.00 3.800 6.000 74.00 36.00 36.00 4.000 6.000 74.00 36.00 36.00 4.100 6.000 74.00 36.00 36.00 4.200 6.000 74.00 36.00 36.00 4.500 6.000 74.00 36.00 36.00 4.800 6.000 82.00 44.00 36.00 5.000 6.000 82.00 44.00 36.00 5.100 6.000 82.00 44.00 36.00 5.200 6.000 82.00 44.00 36.00 5.300 6.000 82.00 44.00 36.00 5.500 6.000 82.00 44.00 36.00 5.800 6.000 82.00 44.00 36.00 6.000 6.000 82.00 44.00 36.00 6.100 8.000 91.00 53.00 36.00 6.200 8.000 91.00 53.00 36.00 6.0 8.000 91.00 53.00 36.00 6.500 8.000 91.00 53.00 36.00 6.700 8.000 91.00 53.00 36.00 6.800 8.000 91.00 53.00 36.00 7.000 8.000 91.00 53.00 36.00 7.100 8.000 91.00 53.00 36.00 7.0 8.000 91.00 53.00 36.00 7.500 8.000 91.00 53.00 36.00 7.800 8.000 91.00 53.00 36.00 8.000 8.000 91.00 53.00 36.00 8.100 10.000 103.00 61.00.00 8.200 10.000 103.00 61.00.00 8.0 10.000 103.00 61.00.00 8.500 10.000 103.00 61.00.00 8.600 10.000 103.00 61.00.00 Avaiabiity bright steam tempered nitrided 38
ratio dris 3-fute Guhring no. 5518 Standard din 6537 Too materia Soid carbide Carbide grade k FT 200 Shank design HA driing depth 5 x d Toerance m7 discount group 155 S dris t max = 2-1,5 x t max d 2 d 1 3 2 1 1 2 3 inch mm mm mm mm mm 8.700 10.000 103.00 61.00.00 8.800 10.000 103.00 61.00.00 9.000 10.000 103.00 61.00.00 9.100 10.000 103.00 61.00.00 9.500 10.000 103.00 61.00.00 9.800 10.000 103.00 61.00.00 10.000 10.000 103.00 61.00.00 10.100 12.000 118.00 71.00.00 10.200 12.000 118.00 71.00.00 10.300 12.000 118.00 71.00.00 10.500 12.000 118.00 71.00.00 11.000 12.000 118.00 71.00.00 11.200 12.000 118.00 71.00.00 11.500 12.000 118.00 71.00.00 11.800 12.000 118.00 71.00.00 12.000 12.000 118.00 71.00.00 12.100 14.000 124.00 77.00.00 12.500 14.000 124.00 77.00.00 13.000 14.000 124.00 77.00.00 13.500 14.000 124.00 77.00.00 14.000 14.000 124.00 77.00.00 14.500 16.000 133.00 83.00 48.00 15.000 16.000 133.00 83.00 48.00 15.500 16.000 133.00 83.00 48.00 16.000 16.000 133.00 83.00 48.00 16.500 18.000 1.00 93.00 48.00 17.000 18.000 1.00 93.00 48.00 17.500 18.000 1.00 93.00 48.00 18.000 18.000 1.00 93.00 48.00 18.500 20.000 153.00 101.00 50.00 19.000 20.000 153.00 101.00 50.00 19.500 20.000 153.00 101.00 50.00 20.000 20.000 153.00 101.00 50.00 Avaiabiity TiAN TiCN FIRE TiN 39
Stub dris Guhring no. 5524 5520 5521 Standard din 1897 Too materia HSCO HSS-e-PM Carbide grade S dris Gu 500 dz GT 500 dz Toerance h8 discount group 159 2 1 1 2 inch mm mm mm 1.000 26.00 6.00 1.100 28.00 7.00 1.200 30.00 8.00 1.300 30.00 8.00 1.0 32.00 9.00 1.500 32.00 9.00 1.600 34.00 10.00 1.700 34.00 10.00 1.800 36.00 11.00 1.900 36.00 11.00 2.000 38.00 12.00 2.100 38.00 12.00 2.200.00 13.00 2.300.00 13.00 3/32 2.380.00 14.00 2.0.00 14.00 2.500.00 14.00 2.600.00 14.00 2.700.00 16.00 7/64 2.780.00 16.00 2.800.00 16.00 2.900.00 16.00 3.000.00 16.00 3.100 49.00 18.00 1/8 3.170 49.00 18.00 3.200 49.00 18.00 3.300 49.00 18.00 3.0 52.00 20.00 3.500 52.00 20.00 9/64 3.570 52.00 20.00 3.600 52.00 20.00 3.700 52.00 20.00 3.800 55.00 22.00 3.900 55.00 22.00 5/32 3.970 55.00 22.00 4.000 55.00 22.00 4.100 55.00 22.00 4.200 55.00 22.00 4.300 58.00 24.00 Avaiabiity bright steam tempered nitrided
Stub dris Guhring no. 5524 5520 5521 Standard din 1897 Too materia HSCO HSS-e-PM Carbide grade Gu 500 dz GT 500 dz Toerance h8 discount group 159 S dris 2 1 1 2 inch mm mm mm 11/64 4.370 58.00 24.00 4.0 58.00 24.00 4.500 58.00 24.00 4.600 58.00 24.00 4.700 58.00 24.00 3/16 4.760 62.00 26.00 4.800 62.00 26.00 4.900 62.00 26.00 5.000 62.00 26.00 5.100 62.00 26.00 13/64 5.160 62.00 26.00 5.200 62.00 26.00 5.300 62.00 26.00 5.0 66.00 28.00 5.500 66.00 28.00 7/32 5.560 66.00 28.00 5.600 66.00 28.00 5.700 66.00 28.00 5.800 66.00 28.00 5.900 66.00 28.00 15/64 5.950 66.00 28.00 6.000 66.00 28.00 6.100 70.00 31.00 6.200 70.00 31.00 6.300 70.00 31.00 1/4 6.350 70.00 31.00 6.0 70.00 31.00 6.500 70.00 31.00 6.600 70.00 31.00 6.700 70.00 31.00 6.800 74.00 34.00 6.900 74.00 34.00 7.000 74.00 34.00 7.100 74.00 34.00 9/32 7.1 74.00 34.00 7.200 74.00 34.00 7.300 74.00 34.00 7.0 74.00 34.00 7.500 74.00 34.00 Avaiabiity TiAN TiCN FIRE TiN
Stub dris S dris Guhring no. 5524 5520 5521 Standard din 1897 Too materia HSCO HSS-e-PM Carbide grade Gu 500 dz GT 500 dz Toerance h8 discount group 159 2 1 1 2 inch mm mm mm 7.600 79.00 37.00 7.700 79.00 37.00 7.800 79.00 37.00 7.900 79.00 37.00 5/16 7.9 79.00 37.00 8.000 79.00 37.00 8.100 79.00 37.00 8.200 79.00 37.00 8.300 79.00 37.00 8.0 79.00 37.00 8.500 79.00 37.00 8.600 84.00.00 8.700 84.00.00 11/32 8.730 84.00.00 8.800 84.00.00 8.900 84.00.00 9.000 84.00.00 9.100 84.00.00 9.200 84.00.00 9.300 84.00.00 9.0 84.00.00 9.500 84.00.00 9.600 89.00.00 9.700 89.00.00 9.800 89.00.00 9.900 89.00.00 10.000 89.00.00 10.100 89.00.00 10.200 89.00.00 10.300 89.00.00 10.500 89.00.00 11.000 95.00.00 7/16 11.110 95.00.00 11.500 95.00.00 12.000 102.00 51.00 12.500 102.00 51.00 13.000 102.00 51.00 13.500 107.00 54.00 14.000 107.00 54.00 Avaiabiity bright steam tempered nitrided
Stub dris Guhring no. 5516 Standard din 6539 Too materia Soid carbide Carbide grade k N Toerance h7 discount group 155 S dris 2 1 1 2 inch mm mm mm 2.000 38.00 12.00 2.100 38.00 12.00 2.200.00 13.00 2.300.00 13.00 3/32 2.380.00 14.00 2.0.00 14.00 2.500.00 14.00 2.600.00 14.00 2.700.00 16.00 7/64 2.780.00 16.00 2.800.00 16.00 2.900.00 16.00 3.000.00 16.00 3.100 49.00 18.00 1/8 3.170 49.00 18.00 3.200 49.00 18.00 3.300 49.00 18.00 3.0 52.00 20.00 3.500 52.00 20.00 9/64 3.570 52.00 20.00 3.600 52.00 20.00 3.700 52.00 20.00 3.800 55.00 22.00 3.900 55.00 22.00 5/32 3.970 55.00 22.00 4.000 55.00 22.00 4.100 55.00 22.00 4.200 55.00 22.00 4.300 58.00 24.00 11/64 4.370 58.00 24.00 4.0 58.00 24.00 4.500 58.00 24.00 4.600 58.00 24.00 4.700 58.00 24.00 3/16 4.760 62.00 26.00 4.800 62.00 26.00 4.900 62.00 26.00 5.000 62.00 26.00 5.200 62.00 26.00 Avaiabiity TiAN TiCN FIRE TiN
Stub dris Guhring no. 5516 Standard din 6539 S dris Too materia Soid carbide Carbide grade k N Toerance h7 discount group 155 2 1 1 2 inch mm mm mm 5.500 66.00 28.00 5.800 66.00 28.00 6.000 66.00 28.00 1/4 6.350 70.00 31.00 6.500 70.00 31.00 6.800 74.00 34.00 7.000 74.00 34.00 9/32 7.1 74.00 34.00 7.500 74.00 34.00 5/16 7.9 79.00 37.00 8.000 79.00 37.00 8.500 79.00 37.00 11/32 8.730 84.00.00 8.800 84.00.00 9.000 84.00.00 9.500 84.00.00 10.000 89.00.00 10.200 89.00.00 10.500 89.00.00 11.000 95.00.00 7/16 11.110 95.00.00 11.500 95.00.00 15/32 11.910 102.00 51.00 12.000 102.00 51.00 Avaiabiity bright steam tempered nitrided 44
Jobber dris Guhring no. 5523 5519 5522 Standard din 338 Too materia HSCO HSS-e-PM Carbide grade Gu 500 dz GT 500 dz Toerance h8 discount group 159 S dris 2 1 1 2 inch mm mm mm 1.000 34.00 12.00 1.100 36.00 14.00 1.200 38.00 16.00 1.300 38.00 16.00 1.0.00 18.00 1.500.00 18.00 1.600.00 20.00 1.700.00 20.00 1.800.00 22.00 1.900.00 22.00 2.000 49.00 24.00 2.100 49.00 24.00 2.200 53.00 27.00 2.300 53.00 27.00 3/32 2.380 57.00 30.00 2.0 57.00 30.00 2.500 57.00 30.00 2.600 57.00 30.00 2.700 61.00 33.00 7/64 2.780 61.00 33.00 2.800 61.00 33.00 2.900 61.00 33.00 3.000 61.00 33.00 3.100 65.00 36.00 1/8 3.170 65.00 36.00 3.200 65.00 36.00 3.300 65.00 36.00 3.0 70.00 39.00 3.500 70.00 39.00 9/64 3.570 70.00 39.00 3.600 70.00 39.00 3.700 70.00 39.00 3.800 75.00.00 3.900 75.00.00 5/32 3.970 75.00.00 4.000 75.00.00 4.100 75.00.00 4.200 75.00.00 4.300 80.00.00 Avaiabiity TiAN TiCN FIRE TiN
Jobber dris Guhring no. 5523 5519 5522 Standard din 338 Too materia HSCO HSS-e-PM Carbide grade S dris Gu 500 dz GT 500 dz Toerance h8 discount group 159 2 1 1 2 inch mm mm mm 11/64 4.370 80.00.00 4.0 80.00.00 4.500 80.00.00 4.600 80.00.00 4.700 80.00.00 3/16 4.760 86.00 52.00 4.800 86.00 52.00 4.900 86.00 52.00 5.000 86.00 52.00 5.100 86.00 52.00 13/64 5.160 86.00 52.00 5.200 86.00 52.00 5.300 86.00 52.00 5.0 93.00 57.00 5.500 93.00 57.00 7/32 5.560 93.00 57.00 5.600 93.00 57.00 5.700 93.00 57.00 5.800 93.00 57.00 5.900 93.00 57.00 15/64 5.950 93.00 57.00 6.000 93.00 57.00 6.100 101.00 63.00 6.200 101.00 63.00 6.300 101.00 63.00 1/4 6.350 101.00 63.00 6.0 101.00 63.00 6.500 101.00 63.00 6.600 101.00 63.00 6.700 101.00 63.00 6.800 109.00 69.00 6.900 109.00 69.00 7.000 109.00 69.00 7.100 109.00 69.00 9/32 7.1 109.00 69.00 7.200 109.00 69.00 7.300 109.00 69.00 7.0 109.00 69.00 7.500 109.00 69.00 Avaiabiity bright steam tempered nitrided
Jobber dris Guhring no. 5523 5519 5522 Standard din 338 Too materia HSCO HSS-e-PM Carbide grade Gu 500 dz GT 500 dz Toerance h8 discount group 159 S dris 2 1 1 2 inch mm mm mm 7.600 117.00 75.00 7.700 117.00 75.00 7.800 117.00 75.00 7.900 117.00 75.00 5/16 7.9 117.00 75.00 8.000 117.00 75.00 8.100 117.00 75.00 8.200 117.00 75.00 8.300 117.00 75.00 8.0 117.00 75.00 8.500 117.00 75.00 8.600 125.00 81.00 8.700 125.00 81.00 11/32 8.730 125.00 81.00 8.800 125.00 81.00 9.000 125.00 81.00 9.100 125.00 81.00 9.200 125.00 81.00 9.300 125.00 81.00 9.0 125.00 81.00 9.500 125.00 81.00 9.600 133.00 87.00 9.700 133.00 87.00 9.800 133.00 87.00 9.900 133.00 87.00 10.000 133.00 87.00 10.100 133.00 87.00 10.200 133.00 87.00 10.300 133.00 87.00 10.0 133.00 87.00 10.500 133.00 87.00 11.000 1.00 94.00 7/16 11.110 1.00 94.00 11.500 1.00 94.00 12.000 151.00 101.00 12.500 151.00 101.00 13.000 151.00 101.00 13.500 160.00 108.00 14.000 160.00 108.00 Avaiabiity TiAN TiCN FIRE TiN
Jobber dris Guhring no. 5517 S dris Standard Guhring std. Too materia Soid carbide Carbide grade k N Toerance h7 discount group 155 2 1 1 2 inch mm mm mm 2.000 49.00 24.00 2.100 49.00 24.00 2.200 53.00 27.00 2.300 53.00 27.00 3/32 2.380 57.00 30.00 2.0 57.00 30.00 2.500 57.00 30.00 2.600 57.00 30.00 2.700 61.00 33.00 7/64 2.780 61.00 33.00 2.800 61.00 33.00 2.900 61.00 33.00 3.000 61.00 33.00 3.100 65.00 36.00 1/8 3.170 65.00 36.00 3.200 65.00 36.00 3.300 65.00 36.00 3.0 70.00 39.00 3.500 70.00 39.00 9/64 3.570 70.00 39.00 3.600 70.00 39.00 3.700 70.00 39.00 3.800 75.00.00 3.900 75.00.00 5/32 3.970 75.00.00 4.000 75.00.00 4.100 75.00.00 4.200 75.00.00 4.300 80.00.00 11/64 4.370 80.00.00 4.0 80.00.00 4.500 80.00.00 4.600 80.00.00 4.700 80.00.00 3/16 4.760 86.00 52.00 4.800 86.00 52.00 4.900 86.00 52.00 5.000 86.00 52.00 13/64 5.160 86.00 52.00 Avaiabiity bright steam tempered nitrided 48
Jobber dris Guhring no. 5517 Standard Guhring std. Too materia Soid carbide Carbide grade k N Toerance h7 discount group 155 S dris 2 1 1 2 inch mm mm mm 5.500 93.00 57.00 7/32 5.560 93.00 57.00 15/64 5.950 93.00 57.00 6.000 93.00 57.00 1/4 6.350 101.00 63.00 6.500 101.00 63.00 6.800 109.00 69.00 7.000 109.00 69.00 9/32 7.1 109.00 69.00 7.500 109.00 69.00 5/16 7.9 117.00 75.00 8.000 117.00 75.00 8.500 117.00 75.00 11/32 8.730 125.00 81.00 9.000 125.00 81.00 9.500 125.00 81.00 10.000 133.00 87.00 10.200 133.00 87.00 10.500 133.00 87.00 11.000 1.00 94.00 7/16 11.110 1.00 94.00 11.500 1.00 94.00 15/32 11.910 151.00 101.00 12.000 151.00 101.00 Avaiabiity TiAN TiCN FIRE TiN 49
ong series twist dris S dris Guhring no. 5536 5537 Standard din 3 Too materia HSCO Gu 500 dz Gu 500 dz Toerance h8 h8 discount group 159 159 2 1 1 2 mm mm mm 1.000 56.000 33.000 1.100 60.000 37.000 1.200 65.000.000 1.300 65.000.000 1.0 70.000.000 1.500 70.000.000 1.600 76.000 50.000 1.700 76.000 50.000 1.800 80.000 53.000 1.900 80.000 53.000 2.000 85.000 56.000 2.100 85.000 56.000 2.200 90.000 59.000 2.300 90.000 59.000 2.0 95.000 62.000 2.500 95.000 62.000 2.600 95.000 62.000 2.700 100.000 66.000 2.800 100.000 66.000 2.900 100.000 66.000 3.000 100.000 66.000 3.100 106.000 69.000 3.200 106.000 69.000 3.300 106.000 69.000 3.0 112.000 73.000 3.500 112.000 73.000 3.600 112.000 73.000 3.700 112.000 73.000 3.800 119.000 78.000 3.900 119.000 78.000 4.000 119.000 78.000 4.100 119.000 78.000 4.200 119.000 78.000 4.300 126.000 82.000 4.0 126.000 82.000 4.500 126.000 82.000 4.600 126.000 82.000 4.700 126.000 82.000 4.800 132.000 87.000 Avaiabiity bright steam tempered nitrided 50
ong series twist dris Guhring no. 5536 5537 Standard din 3 Too materia HSCO Gu 500 dz Gu 500 dz Toerance h8 h8 discount group 159 159 S dris 2 1 1 2 mm mm mm 4.900 132.000 87.000 5.000 132.000 87.000 5.100 132.000 87.000 5.200 132.000 87.000 5.300 132.000 87.000 5.0 139.000 91.000 5.500 139.000 91.000 5.600 139.000 91.000 5.700 139.000 91.000 5.800 139.000 91.000 5.900 139.000 91.000 6.000 139.000 91.000 6.100 148.000 97.000 6.200 148.000 97.000 6.300 148.000 97.000 6.0 148.000 97.000 6.500 148.000 97.000 6.600 148.000 97.000 6.700 148.000 97.000 6.800 156.000 102.000 6.900 156.000 102.000 7.000 156.000 102.000 7.100 156.000 102.000 7.200 156.000 102.000 7.300 156.000 102.000 7.0 156.000 102.000 7.500 156.000 102.000 7.600 165.000 109.000 7.700 165.000 109.000 7.800 165.000 109.000 7.900 165.000 109.000 8.000 165.000 109.000 8.100 165.000 109.000 8.200 165.000 109.000 8.300 165.000 109.000 8.0 165.000 109.000 8.500 165.000 109.000 8.600 175.000 115.000 8.700 175.000 115.000 Avaiabiity TiAN TiCN FIRE TiN 51
ong series twist dris S dris Guhring no. 5536 5537 Standard din 3 Too materia HSCO Gu 500 dz Gu 500 dz Toerance h8 h8 discount group 159 159 2 1 1 2 mm mm mm 8.800 175.000 115.000 8.900 175.000 115.000 9.000 175.000 115.000 9.100 175.000 115.000 9.200 175.000 115.000 9.300 175.000 115.000 9.0 175.000 115.000 9.500 175.000 115.000 9.600 184.000 121.000 9.700 184.000 121.000 9.800 184.000 121.000 9.900 184.000 121.000 10.000 184.000 121.000 10.100 184.000 121.000 10.200 184.000 121.000 10.300 184.000 121.000 10.0 184.000 121.000 10.500 184.000 121.000 11.000 195.000 128.000 11.500 195.000 128.000 12.000 205.000 134.000 12.500 205.000 134.000 13.000 205.000 134.000 13.500 214.000 1.000 14.000 214.000 1.000 Avaiabiity bright steam tempered nitrided 52
one FoR all 16MnCr5 11SMn30+C Sz37 GG GGG C VA Auminium Copper Bronze Brass Pexigass PVC PE 1000 Makroon Gu 500 THe VeRsaTILe one Guhring s Gu 500 dz in the sl range is the perfect too for universa machining tasks. a stub dri or jobber dri, diameters 1.0 to 14.0 mm, bright finish or TiN-coated and suitabe for the machining of amost a materias, the Gu 500 dz reay is a versatie dri.
ratio dris Toos with bod feed coumn no. are preferred choice. S dris Generay recommendations: For safety reasons it is very important, that a dri does not exceed a speed of n = 6,000 rev./min when unsupported. The centrifuga forces can break these ong toos before reaching the workpiece surface! Dri Ø mm Feed coumn no. 1 2 3 4 5 6 7 8 9 f (mm/rev.) 0.50 0.004 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.019 1.00 0.006 0.008 0.012 0.014 0.016 0.018 0.020 0.023 0.025 2.00 0.020 0.025 0.032 0.0 0.050 0.063 0.080 0.100 0.125 2.50 0.025 0.032 0.0 0.050 0.063 0.080 0.100 0.125 0.160 3.15 0.032 0.0 0.050 0.063 0.080 0.100 0.125 0.160 0.160 4.00 0.0 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.200 5.00 0.0 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 6.30 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 8.00 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.315 10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.0 0.0 12.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.0 0.500 16.00 0.100 0.125 0.160 0.200 0.250 0.315 0.0 0.500 0.630 20.00 0.125 0.160 0.200 0.250 0.315 0.0 0.500 0.630 0.630 25.00 0.160 0.200 0.250 0.315 0.0 0.500 0.630 0.800 0.800 31.50 0.160 0.200 0.250 0.315 0.0 0.500 0.630 0.800 1.000.00 0.200 0.250 0.315 0.0 0.500 0.630 0.800 1.000 1.250 50.00 0.250 0.310 0.0 0.500 0.630 0.800 1.000 1.250 1.250 63.00 0.315 0.0 0.500 0.630 0.800 1.000 1.250 1.600 1.600 80.00 0.0 0.500 0.630 0.800 1.000 1.250 1.600 1.600 2.000 Materia group Materia exampes, new description (od description in brackets) Figures in bod = materia no. to EN Common structura stees 1.0035 S185(St33),1.0486 P275N(StE285),1.03 P235GH(H1),1.05 P265GH(H2) 1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500) Free-cutting stees 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36) 1.0727 S20 (S20), 1.0728 (60S20), 1.0757 SPb20 (SPb20) Unaoyed heat-treatabe stees 1.02 C22, 1.1178 C30E (Ck30) 1.0503 C, 1.1191 CE (Ck) 1.0601 C60, 1.1221 C60E (Ck60) Aoyed heat-treatabe stees 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4 1.5710 36NiCr6, 1.7035 Cr4, 1.7225 CrMo4 Unaoyed case hardened stees 1.0301 (C10), 1.1121 C10E (Ck10) Aoyed case hardened stees 1.70 38Cr4 1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5 Nitriding stees 1.8504 34CrA6 1.8519 31CrMoV9, 1.8550 34CrANi7 Too stees 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9 1.2080 X210Cr12, 1.2083 XCr13, 1.29 105WCr6, 1.2767 XNiCrMo4 High speed stees 1.32 S 6-5-2-5, 1.33 S 6-5-2, 1.3344 S 6-5-3 Spring stees 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4) Stainess stees, suphured 1.05 X12CrS13, 1.04 X14CrMoS17, 1.05 X6CrMoS17, 1.05 X8CrNiS18-9 austenitic 1.01 X5CrNi18-10 (V2A), 1. X6CrNiTi18-10, 1.71 X6CrNiMoTi 17-12-2 (V4A) martensitic 1.57 X20CrNi 17 2 (X17CrNi16-2), 1.22 X39CrMo17-1, 1.21 X2CrMoTi18-2 Hardened stees Specia aoys Nimonic, Incone, Mone, Hasteoy Cast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20) 0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35) New cast materias CGI en-gjv250 (GGV25), en-gjv350 (GGV35) en-gjv0 (GGV), en-gjv500 (GGV50), SiMo 6 New cast materias ADI en-gjs-800-8 (ADI800), en-gjs-1000-5 (ADI1000) en-gjs-1200-2 (ADI1200), en-gjs-10-1 (ADI10) Spheroida graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35) maeabe cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70) Chied cast iron Ti and Ti-aoys 3.7024 Ti99,5, 3.7114 TiA5Sn2,5, 3.7124 TiCu2 3.7154 TiA6Zr5, 3.7165 TiA6V4, 3.7184 TiA4Mo4Sn2,5, - TiA8Mo1V1 Auminium and A-aoys 3.0255 A99,5, 3.2315 AMgSi1, 3.3515 AMg1 A wrought aoys 3.0615 AMgSiPb, 3.1325 ACuMg1, 3.32 AMg3Si, 3.65 AZnMgCu1,5 A cast aoys 10 % Si 3.2131 G-ASi5Cu1, 3.2153 G-ASi7Cu3, 3.2573 G-ASi9 > 10 % Si 3.2581 G-ASi12, 3.2583 G-ASi12Cu, - G-ASi12CuNiMg Magnesium aoys 3.5200 MgMn2, 3.5812.05 G-MgA8Zn1, 3.5612.05 G-MgA6Zn1 Copper, ow-aoyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb Brass, short-chipping 2.0380 CuZn39Pb2, 2.01 CuZn39Pb3, 2.00 CuZnPb2 ong-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5 Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn 2.0790 CuNi18Zn19Pb Bronze, ong-chipping 2.0916 CuA5, 2.0960 CuA9Mn, 2.1050 CuSn10 2.0980 CuA11Ni, 2.12 CuBe2 bright steam tempered nitrided Appication recommendations for 7xd, 10xd and 12xd dris: Piot hoes are necessary for extra ength SL dris 7 xd: 1.) the piot hoe can be produced with a short, rigid dri. The diameter shoud be 0.01-0.02 mm arger than the diameter of the SL dri, the driing depth > 1 x D. 2.) aternativey SL dris can produce their own piot hoe. Cutting speed and feed rate shoud be reduced by 30-%. The recommended minimum cooant pressure is bar. Cooing: without cooant ducts with cooant ducts Cooant: Air Neat oi Soube oi : cutting Tensie strength Hardness MPa (N/mm 2 ) 500 >500-850 850 850-1000 700 700-850 850-1000 850-1000 1000-1200 750 850-1000 1000-1200 850-1000 >1000-1200 850 >850-1000 650-1000 850 850 850 1200 800-1000 1200-10 850 >850-1200 0 0 600 600 0 0 600 600 600 >600-850 850 >850-1000 330 HB -48 HRC >48-60 HRC 2 HB <300 HB 220 HB <300 HB 2 HB <300 HB 350 HB Cooant 54
Guhr. no. Too materia Carbide grade finish Cooing 6537 G.S. HA HE HA HE 3 d 5 d 7 d 10 d 12 d Carbide K/P RT 100 u 5510 5610 Carbide Carbide Carbide Carbide Carbide Carbide Carbide K/P K/P K/P K K/P K K/P RT 100 u RT 100 u RT 100 u FT 200 G RT 100 u RT 150 GG RT 100 5514 5614 5511 5611 5515 5615 5518 5512 5612 5513 5525 S dris v c m/min Feed co. no. 1 7 120 6 170 8 1 8 130 8 125 7 120 7 120 7 105 7 1 8 120 7 85 5 110 7 105 5 80 6 65 5 60 3 60 5 55 5 5 55 3 35 2 35 4 195 9 160 9 v c m/min Feed co. no. 130 7 110 6 1 8 110 7 120 7 110 7 105 7 105 7 100 6 130 8 120 7 85 5 100 6 90 5 65 6 55 5 3 55 4 4 3 3 25 2 25 4 210 8 155 8 v c m/min Feed co. no. 1 7 120 6 170 8 1 8 130 8 125 7 120 7 120 7 105 7 1 8 120 7 85 5 110 7 105 5 80 6 65 5 60 3 60 5 55 5 5 55 3 35 2 35 4 210 9 160 9 v c m/min Feed co. no. 130 7 110 6 1 8 110 7 120 7 110 7 105 7 105 7 100 6 130 8 120 7 85 5 100 6 90 5 65 6 55 5 3 55 4 4 3 3 25 2 25 4 195 8 155 8 v c m/min Feed co. no. 100 6 80 6 v c m/min Feed co. no. 1 6 120 5 170 7 1 7 130 7 125 6 120 6 120 6 105 6 1 7 120 6 85 4 110 6 105 4 80 5 65 4 60 4 60 2 60 4 55 4 4 55 2 35 1 35 3 210 8 180 8 v c m/min Feed co. no. 120 6 100 6 v c m/min Feed co. no. 110 8 110 8 120 8 120 8 110 6 110 8 100 7 110 7 110 6 110 8 110 7 110 6 100 5 80 5 100 6 80 5 50 5 50 5 100 5 60 3 100 5 50 4 30 2 1 8 100 8 100 6 100 6 90 8 1 9 130 8 3 4 3 310 9 310 9 260 9 220 9 280 8 125 7 325 8 220 7 125 7 105 6 90 6 80 6 155 7 125 7 35 3 4 35 3 260 9 260 9 220 9 180 8 260 8 105 7 270 8 180 7 105 6 85 6 80 5 60 5 1 9 130 8 3 4 3 310 9 310 9 260 9 220 9 280 8 125 7 325 8 220 7 125 7 105 6 90 6 80 6 1 7 125 7 35 3 4 35 3 260 9 260 9 220 8 170 8 260 8 105 7 270 8 180 7 105 6 85 6 80 5 60 5 80 6 70 6 180 7 160 7 150 7 120 6 180 6 180 6 160 8 130 7 2 3 2 310 8 310 8 260 8 220 8 280 7 125 6 325 7 220 6 125 6 105 5 90 5 80 5 90 6 80 6 2 0 8 0 8 380 8 330 8 280 7 110 6 80 5 1 8 100 8 220 7 180 7 120 1 120 8 TiAN TiCN FIRE TiN 55
dris Toos with bod feed coumn no. are preferred choice. S dris Generay recommendations: For safety reasons it is very important, that a dri does not exceed a speed of n = 6,000 rev./min when unsupported. The centrifuga forces can break these ong toos before reaching the workpiece surface! Dri Ø mm Appication recommendations for 10xd dris: Piot hoes are necessary for extra ength SL dris 7 xd: 1.) the piot hoe can be produced with a short, rigid dri. The diameter shoud be 0.01-0.02 mm arger than the diameter of the SL dri, the driing depth > 1 x D. Feed coumn no. 1 2 3 4 5 6 7 8 9 f (mm/rev.) 0.50 0.004 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.019 1.00 0.006 0.008 0.012 0.014 0.016 0.018 0.020 0.023 0.025 2.00 0.020 0.025 0.032 0.0 0.050 0.063 0.080 0.100 0.125 2.50 0.025 0.032 0.0 0.050 0.063 0.080 0.100 0.125 0.160 3.15 0.032 0.0 0.050 0.063 0.080 0.100 0.125 0.160 0.160 4.00 0.0 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.200 5.00 0.0 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 6.30 0.050 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 8.00 0.063 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.315 10.00 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.0 0.0 12.50 0.080 0.100 0.125 0.160 0.200 0.250 0.315 0.0 0.500 16.00 0.100 0.125 0.160 0.200 0.250 0.315 0.0 0.500 0.630 20.00 0.125 0.160 0.200 0.250 0.315 0.0 0.500 0.630 0.630 25.00 0.160 0.200 0.250 0.315 0.0 0.500 0.630 0.800 0.800 31.50 0.160 0.200 0.250 0.315 0.0 0.500 0.630 0.800 1.000.00 0.200 0.250 0.315 0.0 0.500 0.630 0.800 1.000 1.250 50.00 0.250 0.310 0.0 0.500 0.630 0.800 1.000 1.250 1.250 63.00 0.315 0.0 0.500 0.630 0.800 1.000 1.250 1.600 1.600 80.00 0.0 0.500 0.630 0.800 1.000 1.250 1.600 1.600 2.000 Materia group Materia exampes, new description (od description in brackets) Figures in bod = materia no. to EN Common structura stees 1.0035 S185(St33),1.0486 P275N(StE285),1.03 P235GH(H1),1.05 P265GH(H2) 1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500) Free-cutting stees 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36) 1.0727 S20 (S20), 1.0728 (60S20), 1.0757 SPb20 (SPb20) Unaoyed heat-treatabe stees 1.02 C22, 1.1178 C30E (Ck30) 1.0503 C, 1.1191 CE (Ck) 1.0601 C60, 1.1221 C60E (Ck60) Aoyed heat-treatabe stees 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4 1.5710 36NiCr6, 1.7035 Cr4, 1.7225 CrMo4 Unaoyed case hardened stees 1.0301 (C10), 1.1121 C10E (Ck10) Aoyed case hardened stees 1.70 38Cr4 1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5 Nitriding stees 1.8504 34CrA6 1.8519 31CrMoV9, 1.8550 34CrANi7 Too stees 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9 1.2080 X210Cr12, 1.2083 XCr13, 1.29 105WCr6, 1.2767 XNiCrMo4 High speed stees 1.32 S 6-5-2-5, 1.33 S 6-5-2, 1.3344 S 6-5-3 Spring stees 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4) Stainess stees, suphured 1.05 X12CrS13, 1.04 X14CrMoS17, 1.05 X6CrMoS17, 1.05 X8CrNiS18-9 austenitic 1.01 X5CrNi18-10 (V2A), 1. X6CrNiTi18-10, 1.71 X6CrNiMoTi 17-12-2 (V4A) martensitic 1.57 X20CrNi 17 2 (X17CrNi16-2), 1.22 X39CrMo17-1, 1.21 X2CrMoTi18-2 Hardened stees Specia aoys Nimonic, Incone, Mone, Hasteoy Cast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20) 0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35) Spheroida graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35) maeabe cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70) Chied cast iron Ti and Ti-aoys 3.7024 Ti99,5, 3.7114 TiA5Sn2,5, 3.7124 TiCu2 3.7154 TiA6Zr5, 3.7165 TiA6V4, 3.7184 TiA4Mo4Sn2,5, - TiA8Mo1V1 Auminium and A-aoys 3.0255 A99,5, 3.2315 AMgSi1, 3.3515 AMg1 A wrought aoys 3.0615 AMgSiPb, 3.1325 ACuMg1, 3.32 AMg3Si, 3.65 AZnMgCu1,5 A cast aoys 10 % Si 3.2131 G-ASi5Cu1, 3.2153 G-ASi7Cu3, 3.2573 G-ASi9 > 10 % Si 3.2581 G-ASi12, 3.2583 G-ASi12Cu, - G-ASi12CuNiMg Magnesium aoys 3.5200 MgMn2, 3.5812.05 G-MgA8Zn1, 3.5612.05 G-MgA6Zn1 Copper, ow-aoyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb Brass, short-chipping 2.0380 CuZn39Pb2, 2.01 CuZn39Pb3, 2.00 CuZnPb2 ong-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5 Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn 2.0790 CuNi18Zn19Pb Bronze, ong-chipping 2.0916 CuA5, 2.0960 CuA9Mn, 2.1050 CuSn10 2.0980 CuA11Ni, 2.12 CuBe2 Duropastics Bakeit, Resopa, Pertinax, Motopren Thermopastics Pexigass, Hostaen, Novodur, Makraon Kevar Kevar Gass, carbon concent. pastics GFK/CFK 2.) aternativey SL dris can produce their own piot hoe. Cutting speed and feed rate shoud be reduced by 30-%. The recommended minimum cooant pressure is bar. Cooant: Air Neat oi Soube oi * Cutting ip corrected to appr. 10 Tensie strength Hardness MPa (N/mm 2 ) 500 >500-850 850 850-1000 700 700-850 850-1000 850-1000 1000-1200 750 850-1000 1000-1200 850-1000 >1000-1200 850 >850-1000 650-1000 850 850 850 1200 850 >850-1200 0 0 600 600 0 0 600 600 600 >600-850 850 >850-1000 330 HB -48 HRC >48-60 HRC 2 HB <300 HB 2 HB <300 HB 350 HB Cooant bright steam tempered nitrided 56
Too materia Carbide grade finish Guhring no. straight 1897 338 3 6539 G.S. 3 d driing depth HSCO GU 500 5524 5520 HSS-e-PM GU 500 5521 Carbide K10/K20 N 5516 5 d driing depth HSCO GU 500 5523 5519 HSS-e-PM GT 500 5522 Carbide K10/K20 N 5517 10 d HSCO GU 500 5536 5537 S dris v c v c m/min m/min Feed co. no. 35 6 6 30 35 5 5 50 6 6 30 6 6 32 6 6 28 35 6 6 20 22 5 5 15 18 4 4 13 15 3 3 30 6 6 16 20 4 4 12 15 3 3 15 18 4 4 10 12 3 3 15 18 4 4 10 13 3 3 10 13 3 3 14 18 4 4 10 12 4 4 12 15 4 4 v c m/min Feed co. no. 6 32 5 6 5 6 5 28 4 25 4 20 3 4 22 4 18 3 20 4 15 3 25 4 15 3 15 3 12 2 15 4 10 3 12 3 v c m/min Feed co. no. 25 4 25 3 25 3 20 3 v c v c m/min m/min Feed co. no. 35 6 6 30 35 5 5 50 6 6 30 6 6 32 6 6 28 35 6 6 20 22 5 5 15 18 4 4 13 15 3 3 30 6 6 16 20 4 4 12 15 3 3 15 18 4 4 10 12 3 3 15 18 4 4 10 13 3 3 10 13 3 3 14 18 4 4 10 12 4 4 12 15 4 4 v c m/min Feed co. no. 6 32 5 6 5 6 5 28 4 25 4 20 3 4 22 4 18 3 20 4 15 3 25 4 15 3 15 3 12 2 15 4 10 3 12 3 v c m/min Feed co. no. 25 4 25 3 25 3 20 3 v c v c m/min m/min Feed co. no. 29 32 6 6 22 25 5 5 32 35 6 6 25 28 6 6 25 28 6 6 22 25 6 6 13 15 5 5 12 13 4 4 11 12 3 3 25 28 6 6 12 14 4 4 11 12 3 3 12 13 4 4 7 8 3 3 12 13 4 4 9 10 3 3 9 10 3 3 12 13 4 4 7 8 4 4 11 12 4 4 36 6 6 30 36 6 6 30 6 6 22 28 6 6 50 70 7 7 50 70 7 7 65 85 7 7 60 70 6 6 60 70 6 6 25 32 5 5 63 5 5 30 5 5 36 50 4 4 30 35 4 4 30 32 4 4 25 28 4 4 20 25 4 4 15 15 4 4 50 6 6 6 32 6 8 3 50 5 60 5 50 5 4 4 32 4 25 4 15 2 90 4 80 4 70 4 60 4 20 3 15 2 200 7 200 7 150 6 120 6 180 5 80 5* 180 5* 180 5* 120 5 120 5 70 4 50 3 50 4 3 36 6 6 30 36 6 6 30 6 6 22 28 6 6 50 70 7 7 50 70 7 7 65 85 7 7 60 70 6 6 60 70 6 6 25 32 5 5 63 5 5 30 5 5 36 50 4 4 30 35 4 4 30 32 4 4 25 28 4 4 20 25 4 4 15 15 4 4 50 6 6 6 32 6 8 3 50 5 60 5 50 5 4 4 32 4 25 4 15 2 90 4 80 4 70 4 60 4 20 3 15 2 200 7 200 7 150 6 120 6 180 5 80 5* 180 5* 180 5* 120 5 120 5 70 4 50 3 4 50 3 29 32 6 6 23 26 6 6 25 28 6 6 18 20 6 6 50 7 7 50 7 7 54 60 7 7 50 6 6 50 6 6 21 24 5 5 50 5 5 25 28 5 5 31 35 4 4 22 25 4 4 22 24 4 4 18 20 4 4 16 18 4 4 11 12 4 4 80 3 80 3 TiAN TiCN FIRE TiN 57
ORDERING IS QUICK AND SIMPLE, AROUND THE CLOCK You have seected the optima too for your appication? Ordering is quick and simpe around the cock at Guhring s onine shop http://b2b.guehring.de. As a registered user you wi benefit from the foowing advantages: order entry direct via the Internet server simpe and quick data acquisition thanks to user-friendy face, aso via customer specific order numbers; quick and simpe sourcing of current information regarding prices, deivery times and stock; current deivery status can be caed up at any time Naturay, you can aso order by phone or fax. Teephone and fax numbers can be found on the back cover of the cataogue.
THRead cutting TooLs
Machine taps for metric iso threads S Thread cutting toos bind hoe Guhring no. 5554 5592 5552 5591 Standard din 2184-1 Standard din 371 Too materia HSS-e N r H r Form C Toerance iso 2 / 6H discount group 156 SW 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 3 0.50 3.500 2.70 2.500 56.00 6.00 M 4 0.70 4.500 3. 3.300 63.00 7.50 M 5 0.80 6.000 4.90 4.200 70.00 8.50 M 6 1.00 6.000 4.90 5.000 80.00 11.00 M 8 1.25 8.000 6.20 6.800 90.00 14.00 M10 1.50 10.000 8.00 8.500 100.00 16.00 Avaiabiity bright steam tempered nitrided see page 7 60
Machine taps for metric iso threads bind hoe Guhring no. 5553 5596 5555 5594 5551 Standard din 2184-1 Standard din 371 Too materia HSS-e VA r N r A r Form C Toerance iso 2 / 6H discount group 156 S Thread cutting toos SW 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 3 0.50 3.500 2.70 2.500 56.00 6.00 M 4 0.70 4.500 3. 3.300 63.00 7.50 M 5 0.80 6.000 4.90 4.200 70.00 8.50 M 6 1.00 6.000 4.90 5.000 80.00 11.00 M 8 1.25 8.000 6.20 6.800 90.00 14.00 M10 1.50 10.000 8.00 8.500 100.00 16.00 Avaiabiity TiAN TiCN FIRE TiN 61
Machine taps for metric iso threads S Thread cutting toos bind hoe Guhring no. 5589 Standard din 2184-1 Standard din 376 Too materia HSS-e N r Form C Toerance iso 2 / 6H discount group 156 SW 2 d k 1 P SW dk 1 2 mm mm mm mm mm M12 1.75 9.000 7.00 10.200 110.00 18.50 M16 2.00 12.000 9.00 14.000 110.00 20.00 M20 2.50 16.000 12.00 17.500 1.00 25.00 Avaiabiity bright steam tempered nitrided see page 7 62
Machine taps for metric iso threads Through hoe and bind hoe Guhring no. 5593 Standard din 2184-1 Standard din 371 Too materia Soid carbide H Form C Toerance iso 2 / 6H discount group 156 IC M5 S Thread cutting toos SW d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 4 0.70 4.500 3. 3.300 63.00 10.00 M 5 0.80 6.000 4.90 4.200 70.00 10.00 M 6 1.00 6.000 4.90 5.000 80.00 12.00 M 8 1.25 8.000 6.20 6.800 90.00 16.00 M10 1.50 10.000 8.00 8.500 100.00 18.00 Avaiabiity TiAN TiCN FIRE TiN 63
Machine taps for metric iso threads S Thread cutting toos Through hoe Guhring no. 5560 5590 5558 5587 Standard din 2184-1 Standard din 371 Too materia HSS-e N H Form b Toerance iso 2 / 6H discount group 156 SW d 2 d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 3 0.50 3.500 2.70 2.500 56.00 10.00 M 4 0.70 4.500 3. 3.300 63.00 12.00 M 5 0.80 6.000 4.90 4.200 70.00 14.00 M 6 1.00 6.000 4.90 5.000 80.00 16.00 M 8 1.25 8.000 6.20 6.800 90.00 18.00 M10 1.50 10.000 8.00 8.500 100.00 20.00 Avaiabiity bright steam tempered nitrided see page 7 64
Machine taps for metric iso threads Through hoe Guhring no. 5559 5588 5561 5586 Standard din 2184-1 Standard din 371 Too materia HSS-e-PM HSS-e VA N Form b Toerance iso 2 / 6H discount group 156 S Thread cutting toos SW d 2 d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 3 0.50 3.500 2.70 2.500 56.00 10.00 M 4 0.70 4.500 3. 3.300 63.00 12.00 M 5 0.80 6.000 4.90 4.200 70.00 14.00 M 6 1.00 6.000 4.90 5.000 80.00 16.00 M 8 1.25 8.000 6.20 6.800 90.00 18.00 M10 1.50 10.000 8.00 8.500 100.00 20.00 Avaiabiity TiAN TiCN FIRE TiN 65
Machine taps for metric iso threads S Thread cutting toos Through hoe Guhring no. 5557 5550 5595 Standard din 2184-1 Standard din 371 Too materia HSS-e A GG Form b C Toerance iso 2 / 6H 6Hx discount group 156 SW d 2 d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 3 0.50 3.500 2.70 2.500 56.00 10.00 M 4 0.70 4.500 3. 3.300 63.00 12.00 M 5 0.80 6.000 4.90 4.200 70.00 14.00 M 6 1.00 6.000 4.90 5.000 80.00 16.00 M 8 1.25 8.000 6.20 6.800 90.00 18.00 M10 1.50 10.000 8.00 8.500 100.00 20.00 Avaiabiity bright steam tempered nitrided see page 7 66
Machine taps for metric iso threads Through hoe Guhring no. 5563 Standard din 2184-1 Standard din 376 Too materia HSS-e N Form b Toerance iso 2 / 6H discount group 156 S Thread cutting toos SW d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M12 1.75 9.000 7.00 10.200 110.00 24.00 M16 2.00 12.000 9.00 14.000 110.00 26.00 M20 2.50 16.000 12.00 17.500 1.00 32.00 Avaiabiity TiAN TiCN FIRE TiN 67
Futeess machine taps for metric iso threads S Thread cutting toos Through hoe and bind hoe Guhring no. 5598 Standard din 2174 Standard ~ din 371 Too materia HSS-e N Form C Toerance 6Hx discount group 156 SW d 2 P d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M 3 0.50 3.500 2.70 2.800 56.00 10.00 M 4 0.70 4.500 3. 3.650 63.00 12.00 M 5 0.80 6.000 4.90 4.650 70.00 14.00 M 6 1.00 6.000 4.90 5.550 80.00 16.00 M 8 1.25 8.000 6.20 7.0 90.00 18.00 M10 1.50 10.000 8.00 9.250 100.00 20.00 Avaiabiity bright steam tempered nitrided see page 7 68
Futeess machine taps for metric iso threads Through hoe and bind hoe Guhring no. 5599 Standard din 2174 Standard ~ din 376 Too materia HSS-e N Form C Toerance 6Hx discount group 156 S Thread cutting toos SW d 2 P d 1 2 d k 1 P SW dk 1 2 mm mm mm mm mm M12 1.75 9.000 7.00 11.250 110.00 24.00 M14 2.00 11.000 9.00 13.100 110.00 26.00 M16 2.00 12.000 9.00 15.100 110.00 26.00 Avaiabiity TiAN TiCN FIRE TiN 69
re-grinding re-coating deivery service S re-grinding and re-coating service see page 94 Re-GRINdING & Re-coaTING Guhring thinks big in a service matters. a comprehensive service is a matter of course even post too sae. one area of our service program is the re-grinding and re-coating of toos not ony Guhring toos to origina geometries and origina coatings so the efficiency of your toos is retained indefinitey.
milling cutters
rf 100 u - ratio end mis Std. centre cutting Guhring soid carbide Ratio end mis type RF 100 We have deveoped the Ratio end mi with uneven spira ange primariy to prevent chattering and the so-caed corkscrew effect (as found when withdrawing toos having a arge spira ange) Guhring no. 5534 Standard din 6527 k Too materia Soid carbide Appication N Shank design Hb Heix ange 35 /38 Toerance h10 discount group 157 S Miing Cutters 35 38 However, the uneven spira ange does not ony combat these two unwanted effects but offers the foowing additiona advantages: 38 up to 60% higher in feed rates onger too ife vibration-free machining suitabe for roughing and finishing increased surface quaity 2 1 Too ife Lf [m] 60 50 30 20 10 Typ RF100 Typ NH 1 2 Z mm mm mm mm 6.000 6.000 54.00 10.00 4 8.000 8.000 58.00 12.00 4 10.000 10.000 66.00 14.00 4 12.000 12.000 73.00 16.00 4 16.000 16.000 82.00 22.00 4 20.000 20.000 92.00 26.00 4 Avaiabiity 0 200 300 0 500 600 700 800 900 Cutting speed vc [m/min] Too ife comparison between Ratio end mi RF 100 and a type NH end mi during finishing operation. N 10 µm 10 µm Peak-to-vaey height Ra = 0.81 µm Rt = 5.8 µm Ratio end mi Peak-to-vaey height Ra = 0.26 µm Rt = 1.8 µm A hoe surface quaity comparison between a conventiona end mi type N and a Ratio end mi ceary shows the Ratio end mi s quieter and more stabe machining characteristics. bright steam tempered nitrided see page 7 72
rf 100 u - ratio end mis Std. centre cutting centre cutting Guhring no. 5735 5535 Guhring no. 5582 Standard din 6527 Standard Guhring std. Too materia Soid carbide Too materia Soid carbide Appication Appication N N Shank design HA Hb Shank design HA Heix ange 35 /38 Heix ange 35 /38 Toerance h10 Toerance h10 discount group 157 discount group 157 S Miing Cutters 2 2 1 1 1 2 Z mm mm mm mm 4.000 6.000 57.00 11.00 4 5.000 6.000 57.00 13.00 4 6.000 6.000 57.00 13.00 4 8.000 8.000 63.00 19.00 4 10.000 10.000 72.00 22.00 4 12.000 12.000 83.00 26.00 4 16.000 16.000 92.00 32.00 4 20.000 20.000 104.00 38.00 4 25.000 25.000 121.00.00 4 Avaiabiity 1 2 Z mm mm mm mm 10.000 10.000 100.00.00 4 12.000 12.000 150.00.00 4 16.000 16.000 150.00 65.00 4 20.000 20.000 150.00 65.00 4 25.000 25.000 150.00 75.00 4 Avaiabiity TiAN TiCN FIRE TiN 73
GH 100 u - sot dris (3-futed) centre cutting GH 100 u - High Performance High Heix end mis This new designed ine of High Performance Miing Cutters are avaiabe as GH 100 U 3-Fute Sot Dris for Sot-Miing and Roughing appications, as we as 6-10- Fute end Mis for Super-Finishing Operations. GH 100 U - Sot-Dris (3-Fute) with advanced design which reduces cost in your miing operation. Best chip remova Smooth run/high workpiece quaity Micro Point Correction for more stabiity and onger too ife Guhring no. 5505 Standard din 6527 k Too materia Soid carbide Appication NH Shank design HA Heix ange Toerance h10 discount group 157 S Miing Cutters Z = 3 1 2 Z = 6/10 GH 100 U - End Mis (6-10-Fute) with advanced design which reduces cost in your miing operation. 1 2 Z mm mm mm mm 3.000 6.000 50.00 4.00 3 4.000 6.000 54.00 5.00 3 5.000 6.000 54.00 6.00 3 6.000 6.000 54.00 7.00 3 8.000 8.000 58.00 9.00 3 9.000 10.000 66.00 10.00 3 10.000 10.000 66.00 11.00 3 12.000 12.000 73.00 12.00 3 16.000 16.000 82.00 16.00 3 20.000 20.000 92.00 20.00 3 Avaiabiity ess bending - extreme high workpiece quaity very high feed rates - ess cyce time in production increased too ife GH 100 U 4-Fute Workpiece Conventiona 4-Fute Workpiece bright steam tempered nitrided see page 7 74
GH 100 u - sot dris (3-futed) centre cutting Guhring no. 5506 55 Standard din 6527 Too materia Soid carbide Appication NH Shank design HA Hb Heix ange Toerance h10 discount group 157 GH 100 u - Mini sot dris (3-futed) Guhring no. 5574 Standard Guhring std. Too materia Soid carbide Appication NH Shank design <Ø2.0 HA/Hb Heix ange Toerance e8 discount group 157 S Miing Cutters 2 2 1 1 1 2 Z mm mm mm mm 3.000 6.000 57.00 7.00 3 3.500 6.000 57.00 7.00 3 4.000 6.000 57.00 8.00 3 5.000 6.000 57.00 10.00 3 6.000 6.000 57.00 10.00 3 7.000 8.000 63.00 13.00 3 8.000 8.000 63.00 16.00 3 10.000 10.000 72.00 19.00 3 12.000 12.000 83.00 22.00 3 14.000 14.000 83.00 22.00 3 16.000 16.000 92.00 26.00 3 20.000 20.000 104.00 32.00 3 Avaiabiity 1 2 Z mm mm mm mm 1.000 3.000 38.00 2.00 3 1.200 3.000 38.00 2.00 3 1.500 3.000 38.00 3.00 3 1.800 3.000 38.00 3.00 3 2.000 6.000.00 4.00 3 2.500 6.000.00 5.00 3 3.000 6.000.00 6.00 3 3.500 6.000.00 6.00 3 4.000 6.000.00 7.00 3 4.500 6.000.00 8.00 3 5.000 6.000.00 8.00 3 5.500 6.000.00 8.00 3 5.750 6.000.00 10.00 3 6.000 6.000.00 10.00 3 6.750 8.000 55.00 10.00 3 7.000 8.000 55.00 12.00 3 7.750 8.000 55.00 12.00 3 8.000 8.000 55.00 13.00 3 8.700 10.000 55.00 14.00 3 9.000 10.000 55.00 14.00 3 9.700 10.000 55.00 16.00 3 10.000 10.000 55.00 16.00 3 Avaiabiity TiAN TiCN FIRE TiN 75
GS 100 u - roughing end mis, fine teeth for materias < 48 HrC, cutting over centre Guhring no. 5504 Standard din 6527 Too materia Soid carbide Appication Nrf Shank design Hb Heix ange 30 Toerance h10 discount group 157 GS 100 H - roughing end mis, fine teeth for materias < 56 HrC, cutting over centre Guhring no. 5583 Standard din 6527 Too materia dk 500 uf Appication Hr Shank design Hb Heix ange 20 Toerance h10 discount group 157 S Miing Cutters NRf HR 2 2 1 1 1 2 Z mm mm mm mm 6.000 6.000 57.00 13.00 4 8.000 8.000 63.00 19.00 4 10.000 10.000 72.00 22.00 4 12.000 12.000 83.00 26.00 4 16.000 16.000 92.00 32.00 4 20.000 20.000 104.00 38.00 4 Avaiabiity 1 2 Z mm mm mm mm 6.000 6.000 57.00 13.00 4 8.000 8.000 63.00 19.00 4 10.000 10.000 72.00 22.00 4 12.000 12.000 83.00 26.00 4 16.000 16.000 92.00 32.00 4 20.000 20.000 104.00 38.00 4 Avaiabiity bright steam tempered nitrided see page 7 76
GH 100 u - muti-tooth end mis for superfine finishing of materias < 50 HrC Guhring no. 57 55 Standard Guhring std. Too materia Soid carbide Appication NH Shank design HA Hb Heix ange Toerance h10 discount group 157 for superfine finishing of materias < 50 HrC Guhring no. 5729 Standard Guhring std. Too materia Soid carbide Appication NH Shank design HA Heix ange Toerance h10 discount group 157 S Miing Cutters 2 2 1 1 1 2 Z mm mm mm mm 3.000 6.000 57.00 8.00 6 4.000 6.000 57.00 11.00 6 5.000 6.000 57.00 13.00 6 6.000 6.000 57.00 13.00 6 8.000 8.000 63.00 19.00 6 10.000 10.000 72.00 22.00 6 12.000 12.000 83.00 26.00 6 16.000 16.000 92.00 32.00 6 20.000 20.000 104.00 38.00 8 25.000 25.000 121.00.00 10 Avaiabiity 1 2 Z mm mm mm mm 6.000 6.000 75.00 30.00 6 8.000 8.000 100.00.00 6 10.000 10.000 100.00.00 6 12.000 12.000 150.00.00 6 16.000 16.000 150.00 65.00 6 20.000 20.000 150.00 65.00 8 Avaiabiity TiAN TiCN FIRE TiN 77
Sot dris (2-futed) centre cutting Guhring no. 5730 5530 Standard din 6527 Too materia Soid carbide Appication N Shank design HA Hb Heix ange 30 Toerance h10 discount group 157 x sot dris (2-futed) centre cutting Guhring no. 5549 Standard Guhring std. Too materia Soid carbide Appication N Shank design HA Heix ange 30 Toerance h10 discount group 157 S Miing Cutters 2 2 1 1 1 2 Z mm mm mm mm 2.000 6.000 57.00 6.00 2 3.000 6.000 57.00 7.00 2 4.000 6.000 57.00 8.00 2 5.000 6.000 57.00 10.00 2 6.000 6.000 57.00 10.00 2 8.000 8.000 63.00 16.00 2 10.000 10.000 72.00 19.00 2 12.000 12.000 83.00 22.00 2 16.000 16.000 92.00 26.00 2 20.000 20.000 104.00 32.00 2 Avaiabiity 1 2 Z mm mm mm mm 3.000 3.000 75.00 20.00 2 4.000 4.000 75.00 25.00 2 5.000 5.000 75.00 30.00 2 6.000 6.000 75.00 30.00 2 8.000 8.000 100.00.00 2 10.000 10.000 100.00.00 2 12.000 12.000 150.00.00 2 16.000 16.000 150.00 65.00 2 20.000 20.000 150.00 65.00 2 Avaiabiity bright steam tempered nitrided see page 7 78
A sotting end mis (2-futed) centre cutting Guhring no. 55 Standard din 6527 Too materia Soid carbide Appication w Shank design Hb Heix ange Toerance e8 discount group 157 Sot dris (3-futed) centre cutting Guhring no. 5507 5531 Standard din 6527 Too materia Soid carbide Appication N Shank design HA Hb Heix ange 30 Toerance h10 discount group 157 S Miing Cutters 1 2 1 2 1 2 Z mm mm mm mm 3.000 6.000 57.00 7.00 2 4.000 6.000 57.00 8.00 2 5.000 6.000 57.00 10.00 2 6.000 6.000 57.00 10.00 2 8.000 8.000 63.00 16.00 2 10.000 10.000 72.00 19.00 2 12.000 12.000 83.00 22.00 2 16.000 16.000 92.00 26.00 2 20.000 20.000 104.00 32.00 2 Avaiabiity 1 2 Z mm mm mm mm 2.000 6.000 57.00 6.00 3 2.500 6.000 57.00 7.00 3 3.000 6.000 57.00 7.00 3 3.500 6.000 57.00 7.00 3 4.000 6.000 57.00 8.00 3 5.000 6.000 57.00 10.00 3 6.000 6.000 57.00 10.00 3 8.000 8.000 63.00 16.00 3 10.000 10.000 72.00 19.00 3 12.000 12.000 83.00 22.00 3 14.000 14.000 83.00 22.00 3 16.000 16.000 92.00 26.00 3 20.000 20.000 104.00 32.00 3 Avaiabiity TiAN TiCN FIRE TiN 79
Mini sot dris (3-futed) centre cutting Guhring no. 5573 Standard Guhring std. Too materia Soid carbide Appication N Shank design <Ø2.0 HA/Hb Heix ange 30 Toerance e8 discount group 157 end mis (4-futed) centre cutting Guhring no. 5532 Standard din 6527 Too materia Soid carbide Appication N Shank design Hb Heix ange 30 Toerance h10 discount group 157 S Miing Cutters 2 2 1 1 1 2 Z mm mm mm mm 0.500 3.000 38.00 1.50 3 0.600 3.000 38.00 1.50 3 0.800 3.000 38.00 2.00 3 1.000 3.000 38.00 2.00 3 1.200 3.000 38.00 2.00 3 1.500 3.000 38.00 2.00 3 1.800 3.000 38.00 2.00 3 2.000 6.000 38.00 4.00 3 2.500 6.000 38.00 5.00 3 3.000 6.000 38.00 5.00 3 3.500 6.000 38.00 6.00 3 4.000 6.000 38.00 7.00 3 4.500 6.000 38.00 8.00 3 5.000 6.000 38.00 8.00 3 5.500 6.000 38.00 8.00 3 5.750 6.000 38.00 8.00 3 6.000 6.000 38.00 8.00 3 6.750 8.000.00 10.00 3 7.000 8.000.00 10.00 3 7.750 8.000.00 10.00 3 8.000 8.000.00 11.00 3 8.700 10.000 48.00 11.00 3 9.000 10.000 48.00 11.00 3 9.700 10.000 48.00 11.00 3 10.000 10.000 50.00 13.00 3 12.000 12.000 55.00 15.00 3 14.000 14.000 58.00 15.00 3 16.000 16.000 62.00 18.00 3 20.000 20.000 75.00 22.00 3 Avaiabiity 1 2 Z mm mm mm mm 2.000 6.000 57.00 7.00 4 3.000 6.000 57.00 8.00 4 4.000 6.000 57.00 11.00 4 5.000 6.000 57.00 13.00 4 6.000 6.000 57.00 13.00 4 7.000 8.000 63.00 16.00 4 8.000 8.000 63.00 19.00 4 9.000 10.000 72.00 19.00 4 10.000 10.000 72.00 22.00 4 12.000 12.000 83.00 26.00 4 14.000 14.000 83.00 26.00 4 16.000 16.000 92.00 32.00 4 18.000 18.000 92.00 32.00 4 20.000 20.000 104.00 38.00 4 Avaiabiity bright steam tempered nitrided see page 7 80
x end mis (4-futed) centre cutting Guhring no. 5556 Standard Guhring std. Too materia Soid carbide Appication N Shank design HA Heix ange 30 Toerance h10 discount group 157 Ba nose miing cutters: satisfying the highest demands on accuracy and too ife Especiay the die and moud industry paces ever higher demands on miing cutters primariy with regard to accuracy and too ife. Therefore, Guhring s cutting too program now incudes radius miing cutters that are perfecty adapted to satisfy these demands and provide optima machining resuts thanks to appication orientated geometries, carbide grades and coatings. The advantages are especiay high form and contour accuracy of the workpiece, minima wear and therefore exceent too ife. The specia features of Guhring s ba nose miing cutters are: outside diameter and the radius is ground in one-pass radius point geometry with constant heixradius-correction reduced neck ground for coision reduction with protruding edges S Miing Cutters 1 2 High wear protection thanks to radius geometry with constant rake ange and continuous spira. 1 2 Z mm mm mm mm 3.000 3.000 75.00 20.00 4 4.000 4.000 75.00 25.00 4 5.000 5.000 75.00 30.00 4 6.000 6.000 75.00 30.00 4 8.000 8.000 100.00.00 4 10.000 10.000 100.00.00 4 12.000 12.000 150.00.00 4 16.000 16.000 150.00 65.00 4 20.000 20.000 150.00 65.00 4 Avaiabiity Reduced neck ground for coision reduction Seamess radius area provides high form and contour accuracy. Width of wear in mm 0,20 0,15 0,10 0,05 Standard radius Guhring s seamess radius geometry 0 25 50 75 100 125 150 175 200 225 Too ife in m TiAN TiCN FIRE TiN Wear comparison: Guhring s seamess radius geometry reduces wear and provides a consideraby onger too ife in comparison with toos ground with conventiona fu radius. 81
ba nose sot dris (2-futed) centre cutting Guhring no. 5585 5533 Standard din 6527 Too materia Soid carbide Appication N Shank design HA Hb Heix ange 30 Toerance h10 discount group 157 ba nose end mis (4-futed) centre cutting Guhring no. 5584 Standard din 6527 Too materia Soid carbide Appication N Shank design Hb Heix ange 30 Toerance h10 discount group 157 S Miing Cutters 2 2 1 1 1 2 Z mm mm mm mm 0.500 3.000 38.00 1.00 2 1.000 3.000 38.00 2.00 2 1.500 3.000 38.00 3.00 2 2.000 6.000 57.00 6.00 2 3.000 6.000 57.00 7.00 2 4.000 6.000 57.00 8.00 2 5.000 6.000 57.00 10.00 2 6.000 6.000 57.00 10.00 2 8.000 8.000 63.00 16.00 2 10.000 10.000 72.00 19.00 2 12.000 12.000 83.00 22.00 2 20.000 20.000 104.00 32.00 2 Avaiabiity 1 2 Z mm mm mm mm 3.000 6.000 57.00 8.00 4 4.000 6.000 57.00 11.00 4 5.000 6.000 57.00 13.00 4 6.000 6.000 57.00 13.00 4 8.000 8.000 63.00 19.00 4 10.000 10.000 72.00 22.00 4 12.000 12.000 83.00 26.00 4 20.000 20.000 104.00 38.00 4 Avaiabiity bright steam tempered nitrided see page 7 82
expanation Appication Sot Miing Operations Miing of sots or keyways, ramp miing or punging. width of cut 1 x D Feed rate adjustment: Modifying the cutting depth and width when modifying the cutting depth a p, the feed rate must be reduced in accordance with the iustration on the right cutting speed or revoutions remain unchanged up to cutting depths of 3 x D, must ony be adapted over 3 x D doube reduction appies when aso modifying the cutting width ae! roughing Operations Removing materia in arge cuts, pocket miing incuding ramping. 0.5-1 x D a e = 1 x D f z = 25 % a e = 0,5 x D f z = 50 % a e = 0,25 x D f z = 100 % S Miing Cutters Finishing Operations Side miing with smaer cutting width but better workpiece surface quaity. Fine Finishing Operations Side miing with yet smaer cutting width but yet better workpiece surface quaity. Trace Miing Operations Tracing or 3D copying with extremey sma cutting width or depth. 0.1-0.2 x D 0,02-0,05 x D Radius 0.02-0.05 x D Torus a p = 1 x D f z = 100 % a p = 2 x D f z = 50 % Heica punging: feed 0.1 to 0.2 per cyce reduce feed rate v f (mm/min.) hoe diameter 1.8 x D R max. 2 a p = 3 x D f z = 25 % Punging strategies for driing: reduce feed rate v f (mm/min.) Attention: Danger of breakage through abrupt oad increase! Obique punging up to 15º (preferred): reduction in feed rate v f (mm/min.) not required Obique punging between 15º and 30º: reduce feed rate v f (mm/min.) D-2xR 2 Driing Obique punging Heica punging 15 15...30 90 f z -70 % 15 f z = 100 % 15...30 f z -30 % f z -15 % TiAN TiCN FIRE TiN 83
Toos with bod feed coumn no. (FC no.) are preferred choice. a e = Width of cut a p = Depth of cut Miing cutters Sot miing Schneidstoff Carbide-uF Carbide-uF Typ N N 6527 HA 5730 5507 6527 HB 5530 5531 Guhring std. Guhring std. HA HB * For arge cutting depths on unstabe machines f z and v c must be reduced or a 4-fute too RF 100 (Guhring no. 5582) must be appied. ** To improve the surface quaity, the miing ange shoud be 10-15. Guhring no. S Miing Cutters Feed coumn no. Cutter-Ø mm 37 38 39 44 48 49 50 51 52 f z (mm/tooth) 2.00 0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.020 3.00 0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.030 5.00 0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.038 6.00 0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.0 0.0 8.00 0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.0 0.0 0.0 0.053 0.052 0.058 0.064 10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.080 12.00 0.010 0.018 0.022 0.026 0.030 0.036 0.0 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.100 16.00 0.020 0.023 0.027 0.032 0.038 0.0 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.120 20.00 0.023 0.028 0.033 0.038 0.0 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.1 25.00 0.030 0.035 0.0 0.0 0.055 0.065 0.075 0.100 0.120 0.130 0.1 0.150 0.165 0.170 0.180 0.190 a e = 1 x D a p = 0.5 x D a e = 1 x D a p = 0.5 x D Materia group Materia exampes Tens. strength Hard- MPa (N/mm 2 ) ness Common structura stees 1.0035 S185, 1.0486 P275N, 1.03 P235GH, 1.05 P265GH 1.0050 E295, 1.0070 E360, 1.8937 P500NH Free-cutting stees 1.0718 11SMnPb30, 1.0736 11SMn37 1.0727 S20, 1.0728 60 S20, 1.0757 SPb20 Unaoyed heat-treatabe 1.02 C22, 1.1178 C30E stees 1.0503 C, 1.1191 CE 1.0601 C60, 1.1221 C60E Aoyed heat-treatabe stees 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4 1.5710 36NiCr6, 1.7035 Cr4, 1.7225 CrMo4 Unaoyed case hard. stees 1.0301 C10, 1.1121 C10E Aoyed case hardened stees 1.70 38Cr4 1.5752 15NiCr13, 1.7131 16MnCr5, 1.7264 20CrMo5 Nitriding stees 1.8504 34CrA6 1.8519 31CrMoV9, 1.8550 34CrANi7 Too stees 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9 1.2080 X210Cr12, 1.2083 XCr13, 1.29 105WCr6 High speed stees 1.32 S 6-5-2-5, 1.33 S 6-5-2, 1.3344 S 6-5-3 Spring stees 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 Stainess stees, suphured 1.05 X12CrS13, 1.04 X14CrMoS17, 1.05 X6CrMoS17 austenitic 1.01 X5CrNi18-10, 1. X6CrNiTi18-10 martensitic 1.57 X20CrNi17-2, 1.22 X39CrMo17-1 Hardened stees Specia aoys Nimonic, Incone, Mone, Hasteoy Cast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20) 0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35) Spheroida graphite and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35) maeabe cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70) Chied cast iron Ti and Ti-aoys 3.7024 Ti99,5, 3.7114 TiA5Sn2,5, 3.7124 TiCu2 3.7154 TiA6Zr5, 3.7164 TiA6V4, 3.7184 TiA4Mo4Sn2,5 A and A-aoys 3.0255 A99,5, 3.2315 AMgSi1, 3.3515 AMg1 A wrought aoys 3.0615 AMgSiPb, 3.1325 ACuMg1, 3.32 AMg3Si A cast aoys 10 % Si 3.2131 G-ASi5Cu1, 3.2153 G-ASi7Cu3, 3.2573 G-ASi9 > 10 % Si 3.2581 G-ASi12, 3.2583 G-ASi12Cu, - G-ASi12CuNiMg Magnesium aoys MgMn2, G-MgA8Zn1, G-MgA6Zn3 Copper, ow-aoyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb Brass, short-chipping 2.0380 CuZn39Pb2, 2.01 CuZn39Pb3, 2.00 CuZnPb2 ong-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5 Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn 2.0790 CuNi18Zn19Pb Bronze, ong-chipping 2.0916 CuA5, 2.0960 CuA9Mn, 2.1050 CuSn10 2.0980 CuA11Ni, 2.12 CuBe2 Duropastics Bakeit, Resopa, Pertinax, Motopren Thermopastics Pexigass, Hostaen, Novodur, Makraon 500 >500-850 850 850-1000 700 700-850 850-1000 850-1000 1000-1200 750 850-1000 1000-1200 850-1000 1000-1200 850 850-1000 >650-1000 330 HB 750 750-800 850-1200 -54 HRC >54-60 HRC 1200 2 HB <300 HB 2 HB <300 HB 350 HB 850 850-1200 0 0 600 600 0 0 600 600 600 >600-850 850 850-1000 v c m/min 85-105 81-99 85-105 63-77 85-105 76-94 63-77 76-94 63-77 90-110 76-94 54-66 85-105 76-94 76-94 63-77 - 55-55 - 55-50 36-44 - 55 27-33 108-132 99-121 90-110 81-99 54-66 - 55 36-44 5-495 495-605 198-2 162-198 225-275 108-132 90-110 81-99 90-110 72-88 72-88 63-77 108-132 99-121 Fc no. 44 v c m/min 85-105 81-99 85-105 63-77 85-105 76-94 63-77 76-94 63-77 90-110 76-94 54-66 85-105 76-94 76-94 63-77 - 55-55 - 50 36-44 27-33 108-132 99-121 90-110 81-99 54-66 - 55 36-44 Fc no. a p with f z-correction 1 x D = 75% 1,5 x D = 50% 1 x D = 75% 1,5 x D = 50% bright steam tempered nitrided see page 7 84
Fine finishing Trace miing Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF N NH w N NH NH N N N 5549 5505 5506 5585** 55 55 5533** 5584** 57 5729* 5573 5574 55 a e = 1 x D a e = 1 x D a e = 1 x D a e = 1 x D a e = 1 x D a e = 0.05 x D a e = 0.05 x D a e = 0.05 x D a e = 0.05 x D S Miing Cutters a p = 2 x D a p = 0.5 x D a p = 0.5 x D a p = 0.5 x D a p = 0.5 x D a p = 1.5 x D a p = 3 x D a p = 0.05 x D a p = 0.05 x D v c m/min 72-88 67-83 72-88 54-66 72-88 63-77 54-66 63-77 54-66 67-83 63-77 - 55 72-88 63-77 63-77 54-66 - 50 Fc no. 39 38 38 39 38 38 39 39 39 38 38 39 38 37 38 37 39 v c m/min 94-116 89-109 94-116 69-85 94-116 84-104 69-85 84-104 69-85 99-121 84-104 59-73 94-116 84-104 84-104 69-85 49-61 49-61 49-61 - 55 39-49 49-61 Fc no. v c m/min Fc no. v c m/min 85-105 81-99 85-105 63-77 85-105 76-94 63-77 76-94 90-110 76-94 85-105 76-94 63-77 - 55-55 - 50 36-44 Fc no. v c m/min 94-116 89-109 94-116 69-85 94-116 84-104 69-85 84-104 99-121 84-104 94-116 84-104 69-85 49-61 49-61 - 55 39-49 Fc no. v c m/min 171-209 157-193 171-209 126-154 171-209 153-187 126-154 153-187 126-154 189-231 153-187 117-1 171-209 153-187 153-187 126-154 94-116 94-116 94-116 81-99 76-94 49-61 Fc no. 48 v c m/min Fc no. 136-168 126-154 44 136-168 44 100-124 136-168 44 122-150 44 100-124 122-150 100-124 151-185 44 122-150 44 93-115 136-168 44 122-150 122-150 44 100-124 75-93 75-93 75-93 64-80 61-75 39-49 v c m/min 153-187 144-176 153-187 153-187 135-165 135-165 117-1 126-154 153-187 198-2 171-209 108-132 144-176 135-165 135-165 117-1 85-105 85-105 85-105 76-94 67-83 49-61 Fc no. 48 44 v c m/min 153-187 144-176 153-187 153-187 135-165 135-165 117-1 126-154 153-187 198-2 171-209 108-132 144-176 135-165 135-165 117-1 85-105 85-105 85-105 76-94 67-83 49-61 Fc no. 48 44 94-116 85-105 81-99 67-83 58-72 31-39 38 37 38 37 37 37 29-37 118-1 108-134 99-121 89-109 59-73 49-61 39-49 217-267 178-218 118-1 99-121 99-121 79-97 44 44 44 297-363 360-4 144-176 117-1 171-209 81-99 72-88 67-83 72-88 63-77 63-77 54-66 81-99 72-88 44 108-132 99-121 90-110 81-99 54-66 - 55 36-44 297-363 360-4 144-176 117-1 171-209 81-99 72-88 67-83 72-88 63-77 63-77 54-66 81-99 72-88 44 29-37 118-1 108-134 99-121 89-109 59-73 49-61 39-49 297-363 360-4 217-267 178-218 171-209 118-1 99-121 67-83 99-121 79-97 63-77 54-66 81-99 72-88 44 44 44 54-66 220-270 202-248 180-220 157-193 94-116 76-94 810-990 720-880 5-495 324-396 0-550 216-264 198-2 162-198 198-2 153-187 153-187 126-154 216-264 198-2 44 50 50 48 49 50 49 48 48 48 32-132 - 162 44 121-149 108-132 44 94-116 56-70 - 57 486-594 2-528 2-297 194-238 118-1 118-1 91-113 44 75-93 49-61 198-2 189-231 171-209 144-176 99-121 720-880 855-10 3-8 288-352 5-495 180-220 171-209 162-198 180-220 171-209 198-2 189-231 44 50 50 48 49 50 49 48 48 48 49-61 198-2 189-231 171-209 144-176 99-121 44 3 x D = 50% 1 x D = 75% 1,5 x D = 50% 1 x D = 75% 1,5 x D = 50% 1,5 x D = 75% 1,5 x D = 75% TiAN TiCN FIRE TiN 85
Toos with bod feed coumn no. (FC no.) are preferred choice. a e = Width of cut a p = Depth of cut Miing cutters roughing Schneidstoff Carbide-uF Carbide-uF Typ N N 6527 HA 5735* 5582 6527 HB 5535* 5534* Guhring std. Guhring std. HA HB * With this appication, optima chip evacuation must be ensured. Sot miing ony recommended > Ø 5 mm. ** In the event of excessive edge wear through vibration, the feed rate shoud be reduced by 30%. Guhring no. S Miing Cutters Feed coumn no. Cutter-Ø mm 37 38 39 44 48 49 50 51 52 f z (mm/tooth) 2.00 0.001 0.001 0.001 0.002 0.002 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.014 0.016 0.018 0.020 3.00 0.002 0.002 0.003 0.003 0.004 0.007 0.010 0.010 0.010 0.015 0.016 0.013 0.019 0.022 0.024 0.030 5.00 0.005 0.006 0.007 0.009 0.010 0.014 0.020 0.020 0.022 0.025 0.026 0.026 0.028 0.030 0.032 0.038 6.00 0.006 0.008 0.009 0.011 0.013 0.017 0.024 0.025 0.027 0.031 0.029 0.033 0.039 0.036 0.0 0.0 8.00 0.010 0.012 0.014 0.016 0.019 0.024 0.032 0.032 0.035 0.0 0.0 0.0 0.053 0.052 0.058 0.064 10.00 0.013 0.015 0.018 0.021 0.025 0.030 0.038 0.039 0.044 0.050 0.053 0.059 0.065 0.066 0.073 0.080 12.00 0.010 0.018 0.022 0.026 0.030 0.036 0.0 0.048 0.052 0.059 0.063 0.072 0.079 0.085 0.090 0.100 16.00 0.020 0.023 0.027 0.032 0.038 0.0 0.054 0.058 0.063 0.071 0.079 0.088 0.095 0.100 0.110 0.120 20.00 0.023 0.028 0.033 0.038 0.0 0.057 0.066 0.073 0.080 0.090 0.097 0.100 0.110 0.120 0.130 0.1 25.00 0.030 0.035 0.0 0.0 0.055 0.065 0.075 0.100 0.120 0.130 0.1 0.150 0.165 0.170 0.180 0.190 Materia group Materia exampes Tens. strength Hard- MPa (N/mm 2 ) ness Common structura stees 1.0035 S185, 1.0486 P275N, 1.03 P235GH, 1.05 P265GH 1.0050 E295, 1.0070 E360, 1.8937 P500NH Free-cutting stees 1.0718 11SMnPb30, 1.0736 11SMn37 1.0727 S20, 1.0728 60 S20, 1.0757 SPb20 Unaoyed heat-treatabe 1.02 C22, 1.1178 C30E stees 1.0503 C, 1.1191 CE 1.0601 C60, 1.1221 C60E Aoyed heat-treatabe stees 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr4 1.5710 36NiCr6, 1.7035 Cr4, 1.7225 CrMo4 Unaoyed case hard. stees 1.0301 C10, 1.1121 C10E Aoyed case hardened stees 1.70 38Cr4 1.5752 15NiCr13, 1.7131 16MnCr5, 1.7264 20CrMo5 Nitriding stees 1.8504 34CrA6 1.8519 31CrMoV9, 1.8550 34CrANi7 Too stees 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9 1.2080 X210Cr12, 1.2083 XCr13, 1.29 105WCr6 High speed stees 1.32 S 6-5-2-5, 1.33 S 6-5-2, 1.3344 S 6-5-3 Spring stees 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 Stainess stees, suphured 1.05 X12CrS13, 1.04 X14CrMoS17, 1.05 X6CrMoS17 austenitic 1.01 X5CrNi18-10, 1. X6CrNiTi18-10 martensitic 1.57 X20CrNi17-2, 1.22 X39CrMo17-1 Hardened stees Specia aoys Nimonic, Incone, Mone, Hasteoy Cast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20) 0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35) Spheroida graphite and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35) maeabe cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70) Chied cast iron Ti and Ti-aoys 3.7024 Ti99,5, 3.7114 TiA5Sn2,5, 3.7124 TiCu2 3.7154 TiA6Zr5, 3.7164 TiA6V4, 3.7184 TiA4Mo4Sn2,5 A and A-aoys 3.0255 A99,5, 3.2315 AMgSi1, 3.3515 AMg1 A wrought aoys 3.0615 AMgSiPb, 3.1325 ACuMg1, 3.32 AMg3Si A cast aoys 10 % Si 3.2131 G-ASi5Cu1, 3.2153 G-ASi7Cu3, 3.2573 G-ASi9 > 10 % Si 3.2581 G-ASi12, 3.2583 G-ASi12Cu, - G-ASi12CuNiMg Magnesium aoys MgMn2, G-MgA8Zn1, G-MgA6Zn3 Copper, ow-aoyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPb Brass, short-chipping 2.0380 CuZn39Pb2, 2.01 CuZn39Pb3, 2.00 CuZnPb2 ong-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5 Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn 2.0790 CuNi18Zn19Pb Bronze, ong-chipping 2.0916 CuA5, 2.0960 CuA9Mn, 2.1050 CuSn10 2.0980 CuA11Ni, 2.12 CuBe2 Duropastics Bakeit, Resopa, Pertinax, Motopren Thermopastics Pexigass, Hostaen, Novodur, Makraon 500 >500-850 850 850-1000 700 700-850 850-1000 850-1000 1000-1200 750 850-1000 1000-1200 850-1000 1000-1200 850 850-1000 >650-1000 330 HB 750 750-800 850-1200 -54 HRC >54-60 HRC 1200 2 HB <300 HB 2 HB <300 HB 350 HB 850 850-1200 0 0 600 600 0 0 600 600 600 >600-850 850 850-1000 a e = 0.5-1.0 x D v c m/min 170-208 157-193 170-208 126-154 170-208 151-185 126-154 151-185 126-154 189-231 151-185 113-139 170-208 151-185 151-185 126-154 94-116 94-116 80-100 70-90 65-70 44-54 56-70 220-270 201-2 182-224 157-193 107-131 54-86 44-72 51 50 50 49 50 50 49 49 48 50 50 49 50 48 50 48 49 48 49 48 49 48 50 49 50 49 a e = 0.25 x D a p = 1 x D a p = 2 x D Fc no. v c m/min 110-136 102-126 110-136 81-101 110-136 98-120 81-101 98-120 81-101 123-151 98-120 73-91 110-136 98-120 98-120 81-101 61-75 60-80 55-75 50-65 1-175 131-161 118-1 102-126 69-85 61-75 49-61 300-380 370-4 150-185 115-1 175-215 80-100 75-95 60-75 75-95 55-70 Fc no. 44 44 44 44 44 44 f z-correction a p 1.5 x D = 50% a e 0.25 x D = 150% a p 0.5 x D = 75% a p 2 x D = 50% bright steam tempered nitrided see page 7 86
Finishing Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF Carbide-uF NH w Nrf Hr N N N N w 5505 5506 5735 5582 5556 55 55 5504** 5583** 5535 5534 5532 55 a e = 0.5-1.0 x D a e = 0.5-1.0 x D a e = 0.5-1.0 x D a e = 0.5-1.0 x D a e = 0.1 x D a e = 0.1 x D a e = 0.1 x D a e = 0.1 x D a e = 0.1 x D S Miing Cutters a p = 1 x D a p = 1 x D a p =1 x D a p = 1 x D a p = 1 x D a p = 2 x D a p = 1 x D a p = 2 x D a p = 1 x D Fc no. v c m/min Fc no. v c m/min v c m/min Fc no. Fc no. Fc no. Fc no. Fc no. v c m/min Fc no. v c m/min 170-208 157-193 170-208 126-154 170-208 151-185 126-154 151-185 126-154 189-231 151-185 113-139 170-208 151-185 151-185 126-154 94-116 67-83 67-83 58-72 54-66 31-39 - 50 157-193 144-176 130-160 112-138 76-94 67-83 54-66 117-1 63-77 63-77 54-66 81-99 72-88 49 48 48 48 48 48 48 48 48 44 48 48 297-363 360-4 144-176 117-1 171-209 81-99 72-88 67-83 72-88 63-77 63-77 54-66 81-99 72-88 44 44 44 44 97-119 90-110 97-119 72-88 97-119 86-106 72-88 86-106 72-88 108-132 86-106 64-80 97-119 86-106 86-106 72-88 54-66 - 58-53 25-31 32-126 - 154 115-1 104-128 90-110 54-66 - 53 117-1 94-116 117-1 87-107 87-107 72-90 Fc no. 38 44 44 44 44 44 72-88 86-106 64-80 97-119 86-106 86-106 72-88 54-66 54-66 - 53 25-31 18-22 126-154 115-1 104-128 90-110 61-75 117-1 117-1 87-107 39 39 39 26 38 38 39 v c m/min 212-260 194-238 212-260 158-194 212-260 194-238 158-194 188-230 158-194 236-290 188-230 139-171 212-260 194-238 188-230 158-194 121-149 121-149 121-149 103-127 97-119 61-75 72-90 255-313 255-313 231-283 194-238 134-164 121-149 97-119 49 48 48 48 48 48 48 48 48 44 48 48 v c m/min 139-171 127-157 139-171 109-135 139-171 121-149 103-127 121-149 103-127 134-164 121-149 90-112 139-171 121-149 121-149 103-127 79-97 72-90 62-75 58-72 182-224 163-201 152-186 127-157 79-97 61-75 220-280 250-300 220-250 200-2 210-260 110-120 100-120 90-110 100-120 44 44 44 44 44 44 44 v c m/min 157-193 144-176 157-193 117-1 157-193 144-176 117-1 139-171 117-1 175-215 139-171 103-127 157-193 144-176 139-171 117-1 90-110 90-110 76-94 72-88 54-66 189-231 189-231 171-209 144-176 99-121 90-110 72-88 765-935 373-7 306-374 198-2 180-220 144-176 180-220 135-165 48 44 44 50 48 49 49 48 48 48 v c m/min 103-127 94-116 103-127 81-99 103-127 90-110 76-94 90-110 76-94 99-121 90-110 67-83 103-127 90-110 90-110 76-94 58-72 135-165 121-149 112-138 94-116 58-72 - 55 0-550 225-275 180-220 135-165 108-132 90-110 108-132 39 44 44 3-8 4-506 165-203 197-2 93-115 82-102 77-95 82-102 72-90 93-115 82-102 51 50 49 51 50 49 49 49 48 a p 0.5 x D = 120% a p 0.5 x D = 120% a p 1.5 x D = 50% a p 0.5 x D = 120% a p 2 x D = 50% a p 3 x D = 50% a p 2 x D = 50% a p 3 x D = 50% a p 2 x D = 50% a p 2 x D = 50% a p 2 x D = 50% a e 0.25xD = 1% TiAN TiCN FIRE TiN 87
Tm VeNdING machine Guhring s moduar Tm Vending machine reieves the customer of a tasks regarding too storage and administration. Drawer and spira modues enabe the individua adaptation to specific customer storage requirements. The inteigent software ensures too avaiabiity around the cock and detaied evauation of a consumption and movement data.
ReameRs