NAVSEA STANDARD ITEM NUMERICAL INDEX

Similar documents
ELEC / ELEX COMMITTEE Fiber Optic Component; remove, relocate, repair, and install Electronic Equipment; repair Rotating

Standard Specifications for Ship Repair and Alteration Committee SSRAC

STANDARD PHRASEOLOGY SECTION A

NAVSEA STANDARD ITEM. 1.1 Title: Interference; remove and install LP , Submarine Safety (SUBSAFE) Requirements Manual

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM. 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish

NAVSEA STANDARD ITEM. 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish

NAVSEA STANDARD ITEM. 1.1 Title: Authorization, Control, Isolation, Blanking, Tagging, and Cleanliness; accomplish

SKF marine solutions. Improving fleet efficiency and predictability in a sustainable way. The Power of Knowledge Engineering

EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).

u m p a n d u m p i n g y s t e m p e c i a l i s t s i n c e

Environmental Requirement Review Checklist and Certification

HOT, CHILLED, AND CONDENSING WATER PIPING SPECIALTIES (HVAC)

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION

Mechatronics Courses by School Period

NOTE TO SPECIFYING ARCHITECT REGARDING SECTION CONTOUR CURTAIN AND MOTOR

GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS

Newport News Shipbuilding Contractor Environmental, Health and Safety Resource Manual Hazardous Energy Control

SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS

NAVSEA STANDARD ITEM. 1.1 Title: Asbestos-Containing Material (ACM); control

NAVSEA STANDARD ITEM. 1.1 Title: Asbestos-Containing Material (ACM); control

SPECIFICATIONS - DETAILED PROVISIONS Section Progressing Cavity Pump C O N T E N T S

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)

Technical Summary. 1. Purpose

Pump Specifications 450 Series 1/2 hp Submersible Sump Pump

University of Delaware

DESIGN & CONSTRUCTION GUIDELINES

SECTION STEAM AND CONDENSATE HEATING PIPING

NAVSEA STANDARD ITEM

SKF marine solutions. Improving fleet efficiency and predictability in a sustainable way. The Power of Knowledge Engineering

100 Safety and Soft 114 Fall Protection 150 Environmental Skills Awareness 116 Compressed Gas 101 Personal Protective Cylinder Safety

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works

STANDARD PHRASEOLOGY SECTION B. 1. This section of standard phraseology is for general use in all disciplines.

Read Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED

Building Maintenance & Property Management Syllabus Outline

MANAGEMENT OF ASBESTOS FREE MATERIALS AND SPARES ON COMPANY SHIPS

.1 marine diesel engine.1 approved in-service appropriate experience.2 marine steam turbine.2 approved training.3 marine gas turbine ship experience

SECTION BASIC FIRE SUPPRESSION MATERIALS AND METHODS. A. Section includes pipe, fittings, valves, and connections for sprinkler systems.

A. This Section includes the following sump pumps and accessories, inside the building, for building storm drainage systems:

COMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves

SAFETY DIGEST PART - B INDEX

API 675 Evaluation. Section 1 General. 1.5 Referenced Publications. 1.1 Scope. 1.6 Unit Conversion. 1.2 Alternative Designs

PROJECT SPECIFICATIONS

The following words and terms, when used in this article, shall have the following definitions, unless the context clearly indicates otherwise:

Part 1. Potentially hazardous materials in the ship's structure and equipment. 1A Asbestos & Asbestos Containing Materials (ACMs)

2. Water Pressure Booster Systems. 3. Duplex Pedestal Type Sump Pumps.

Owners List of Known Workplace Hazards CONTRACT TITLE LIBRARY SQUARE ELEVATORS #10-#11 MODERNIZATION (OCT20/16)

REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES. Safety Standards Act M 62

Contents EN 14015:2004 (E) page

EXECUTION REQUIREMENTS

4th Class Power Engineering (PEN) Curriculum Mapping

INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES. Interpretations of the. HSC Code

P A C K A G E R. Oil & Gas

Lifting Appliances of Ships and Offshore Installations

SECTION MECHANICAL EQUIPMENT - GENERAL REQUIREMENTS

ADDENDUM NUMBER 1 PARTICULARS 1.01 DATE: APRIL 6, 2018

SECTION SLUDGE HOLDING TANK DECANTER PUMP

SECTION INSTALLATION OF OWNER-FURNISHED PRODUCTS

PROCUREMENT AND CONTRACTING DOCUMENTS GROUP

Ship Recycling Convention

University of Delaware

ENSA ENWESA SERVICES INDEX

WALL CANTILEVER WORK STATION JIB CRANE

SECTION HVAC PUMPS. A. Provide centrifugal HVAC pumps, called for in drawing schedule, and as needed for a complete and proper installation.

SECTION AIR-TO-AIR ENERGY RECOVERY EQUIPMENT

Solar Thermal Nominated Technical Persons Criteria

SPECIFICATIONS FOR ON-SITE REBUILD OF TRAVELING WATER SCREENS

SECTION FACILITY POTABLE WATER DISTIBUTION

C. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.

Design and Construction Standards SECTION POTABLE WATER SYSTEMS

Code. 1) Code. Standard or Specification. Bolting

Generic New Construction Cost Estimating Libraries

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT

Solutions for: The Power Generation Industry

Manufacturing Machinery and Equipment.

TM Series Induced Draft Cooling Tower Specifications

SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING

SECTION ALUMINUM GATES

Technical Summary. Purpose. ITER_D_RZ5S7J v2.1

VAAL UNIVERSITY OF TECHNOLOGY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING EXPERIENTIAL LEARNING FUNDAMENTAL LEARNING

University of Delaware

SECTION FUEL-FIRED UNIT HEATERS

Supplier s Technical Approval Technical and Quality Management System Evaluation

SECTION B PLAN SUBMITTAL

SCHEDULE 8 CITY PRE-CONTRACT HAZARD ASSESSMENT FORM

Flygt hydro turbines SMART AND COMPACT HYDROPOWER. 50 Hz

NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments

SECTION (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS

McDuff WTP High Service Pump Replacement

OPERATIONS AND MAINTENANCE TECHNICIAN IV (MECHANICAL) (JOURNEY)

REBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION

INDUSTRIAL MECHANIC (MILLWRIGHT)

SECTION PACKAGED, SUBMERSIBLE SEWERAGE PUMP UNITS

NZQA unit standard version 1 Page 1 of 7. Demonstrate knowledge of electromechanical engineering principles for technicians

SECTION MOTOR CONTROL CENTER

DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS

Transcription:

NAVSEA STANDARD ITEM NUMERICAL INDEX FY-18(CH-2) ITEM NO. 009-01 General Criteria; 009-02 Environmental Compliance Report for Material Usage at Naval Facility; 009-03 Toxic and Hazardous Substance; control 009-04 Quality Management System; 009-05 Temporary Access; 009-06 Maintaining Protection and Cleanliness from Non-Radioactive Operations; 009-07 Confined Space Entry, Certification, Fire Prevention and Housekeeping; 009-08 Shipboard Fire Protection and Fire Prevention; 009-09 Process Control Procedure (PCP); and 009-10 Asbestos-Containing Material (ACM); control 009-11 Insulation and Lagging; 009-12 Weld, Fabricate, and Inspect; I 07 MAR 2017 009-13 Meter; repair 009-14 Gage, Switch, and Thermometer; repair 009-15 Rotating Machinery; balance 009-16 Electronic Equipment; repair 1 of 8 FY-18(CH-2)

009-17 Rotating Electrical Equipment; repair 009-18 Magnetic Material; control I 07 MAR 2017 009-19 Provisioning Technical Documentation (PTD); I 30 JUL 2015 009-20 Government Property; control I 18 JUL 2014 009-21 Logistics and Technical Data; I 18 JUL 2014 009-22 Canceled 18 NOV 2016 009-23 Interference; remove and install 009-24 Authorization, Control, Isolation, Blanking, Tagging and Cleanliness; 009-25 Structural Boundary Test; I 01 OCT 2017 009-26 Deck Covering; II 07 MAR 2017 009-27 Material Identification and Control (MIC) for Level I System; 009-28 Canceled 18 NOV 2016 009-29 Asbestos-Free Pipe Hanger Liner Material; install I 29 JUL 2004 009-30 Boiler Sample Tube; inspect 009-31 Boiler Waterjet Cleaning; 009-32 Cleaning and Painting Requirements; 009-33 Rotating Electrical Equipment; rewind 009-34 Fire Protection of Unmanned Vessel at Contractor Facility; II 18 JUL 2014 II 07 MAR 2017 II 01 OCT 2017 009-35 Canceled 18 NOV 2016 009-36 Controller; repair 2 of 8 FY-18(CH-2)

009-37 General Procedure for Woodwork; 009-38 Boiler, Catapult Accumulator, and Reboiler Dry Lay-up; 009-39 Technical Manual Contract Requirement (TMCR) for a New Technical Manual for Commercial Equipment/Component; 009-40 Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; 009-41 Technical Manual Contract Requirement (TMCR) for a Topically Structured Technical Manual; 009-42 Technical Manual Contract Requirement (TMCR) for Updating Technical Manual; 009-43 Engineering Plant Production Completion Date (PCD), Light-Off Assessment (LOA) Support; II 30 JUL 2015 009-44 Cancelled 18 JUL 2014 009-45 Tapered Plug Valve; repair 009-46 Butterfly Valve, Synthetic and Metal Seated; repair II 18 JUL 2014 009-47 Gate Valve; repair 009-48 Pressure Seal Bonnet Valve Shop Repair; 009-49 Pressure Seal Bonnet Valve Inline Repair; 009-50 Horizontal Swing Check Valve; repair 009-51 Globe, Globe Angle, and Globe Stop Check Valve; repair 009-52 Relief Valve; repair 3 of 8 FY-18(CH-2)

009-53 Bolted Bonnet Steam Valve Shop Repair; 009-54 Bolted Bonnet Steam Valve In-line Repair; 009-55 Regulating/Reducing Valve; repair 009-56 Main Propulsion Boiler Wet Layup; 009-57 Reduction Gear Security; 009-58 Pump and Driver Shaft Alignment; 009-59 Organotin Antifouling Material; control 009-60 Schedule and Associated Reports for Availabilities Over 9 Weeks in Duration; and manage 009-61 Shipboard Use of Fluorocarbons; control 009-62 Boiler Handhole, Manhole Seat and Plate; inspect 009-63 Lubricating Oil and Hydraulic Fluid; analyze 009-64 Synthetic Fire Resistant Hydraulic Fluid; control 009-65 Polychlorinated Biphenyls (PCBs); control 009-66 Cancelled 18 JUL 2014 009-67 Integrated Total Ship Testing; manage II 01 SEP 2015 I 01 SEP 2015 I 18 JUL 2014 I 29 JUL 2011 009-68 Bolted Bonnet Valve; repair II 29 JUL 2011 009-69 Heavy Weather/Mooring Plan; 009-70 Confined Space Entry, Certification, Fire Protection, Fire Prevention, and Housekeeping for Unmanned Vessel; 4 of 8 FY-18(CH-2)

009-71 Piping System; test 009-72 Physical Security at a Private Contractor Facility; 009-73 Shipboard Electrical/Electronic Cable Procedure; 009-74 Occupational, Safety and Health Plan; I 01 OCT 2017 009-75 Circuit Breaker; repair 009-76 Waveguide and Rigid Coaxial Lay- Up; 009-77 Cofferdam Installation; 009-78 Passive Countermeasures System (PCMS) Material; repair 009-79 Government Owned Material (GOM) Status; report 009-80 Ship Facilities; maintain 009-81 Compartment Closeout; 009-82 Installation of Equal Component Vice Specified Component; report 009-83 Wire Rope Assembly; fabricate 009-84 Threaded Fastener Requirements; 009-85 Government Sponsored Planning Yard/Configuration Data Manager (CDM) On-Site Representative Facility; 009-86 Recovery and Turn-In of Ozone Depleting Substance (ODS); 009-87 Chemical Disinfection Procedure; II 19 JUL 2007 5 of 8 FY-18(CH-2)

009-88 Collection, Holding and Transfer (CHT) and Motor Gasoline(MOGAS) Tanks, Spaces, and Piping, including Sewage or MOGAS- Contaminated Tanks, Spaces, and Piping; certify 009-89 Contractor Furnished Anode(Purchase and Inspection); 009-90 Technical Representative; II 18 JUL 2014 009-91 Propeller In-Place Inspection; 009-92 Resilient Mount; install 009-93 Emergency Planning and Community Right-to-Know Act (EPCRA) and Pollution Prevention Act (PPA) Information; 009-94 General Environmental Work at Contractor Facility; 009-95 Mechanically Attached Fitting (MAFs); install 009-96 Ball Valve; repair 009-97 Shipbuilding and Ship Repair Operations National Emission Standard for Hazardous Air Pollutants (NESHAPS) for Surface Coating Information; I 17 JAN 2013 009-98 Canceled 18 NOV 2016 009-99 Ship Departure Report; I 18 JUL 2014 009-100 Ship's Stability; maintain 009-101 Ship Transit and Berthing; 009-102 Alteration Verification; I 29 JUL 2011 009-103 Weight and Moment Change Data; I 18 JUL 2014 009-104 Vibration Testing and Analysis; II 18 JUL 2014 6 of 8 FY-18(CH-2)

009-105 Thermal Sprayed Coating for Machinery Component Repair; 009-106 Work Authorization Form Coordinator (WAFCOR); 009-107 Piping System Cleanliness Restoration (Non-Nuclear); 009-108 Aircraft Carrier Transit and Berthing; 009-109 Non-SUBSAFE Work on SUBSAFE- Certified Vessel; 009-110 Non-Nuclear Work on a Nuclear Vessel; 009-111 Schedule and Associated Reports for Availabilities 9 Weeks or Less in Duration; and manage 009-112 Prevention of Radiographic- Inspection Ionizing-Radiation Hazard; I 01 OCT 2017 009-113 Rotating Electrical Equipment with a Sealed Insulation System (SIS); rewind II 01 OCT 2017 009-114 Mold Remediation; II 07 NOV 2013 009-115 Bearing Rebabbitting; II 30 JUL 2015 009-116 Auxiliary and Waste Heat Boiler Sodium Nitrite Wet Lay-up; II 30 JUL 2015 009-117 Combat Systems Light-Off; support 009-118 CG Deck Loading; I 18 JUL 2014 7 of 8 FY-18(CH-2)

009-119 Cancelled 18 JUL 2014 009-120 Fact Finding and Critique of Unplanned Event; manage 009-121 Ship Assessment/Inspection; 009-122 Temporary Padeye; install and remove 009-123 Fiber Optic Component; remove, relocate, repair, and install 8 of 8 FY-18(CH-2)