PRODUCT OVERVIEW PV FLAT ROOF MOUNTING SYSTEMS
THE REVOlution The innovative PMT click-technology for fastest assembly of your PV flat roof mounting system simple and precise. Just... 2...CLICK!
THE DECISION Uncompromising quality ensures maximum efficiency. Cheap systems are not always good systems as low prices necessarily require cost savings in material use and material quality. Long-term requirements with regard to safety must stand back. In the medium- and long-term period under review, this results in higher costs for maintenance and repair work. Our extremely stable mounting system forms the optimal basis for profit-yielding PV operation with regard to maximum overall economy consisting of system acquisition costs, mounting time and building security. Opt for a high-performance mounting system of the brand PMT. The pillars of our quality. Safety Statistical calculation of all system components Component testing in the materials laboratory (non-destructive and destructive tests) Wind tunnel tests incl. test certificate in boundary layer wind tunnels (Eurocode, ASCE 7-05, ASCE 7-10 and SEAOC PV 2-2012) External interpretation and evaluation of wind tunnel results Calculation of the complete system statics (Eurocode) Load action areas of the complete system established under real-life conditions. No theoretical data of ballast distribution/ ballast requirement through practical testing Planning software implementation of all relevant data incl. external assessment and verification Quickness Convenient component parts for easy and safe handling during assembly No measuring within the system required as all positions fall into place through defined and repetitive components Simplest connection of component parts through innovative click-connections Only one tool for middle clamp, end clamp, rear cover, cross braces and ballast braces 4
8 mm 150 mm 330/lm 2040 kwp/40 t Clamping length 40 mm Via the module frame 3080 kwp/40 t 434/lm EAST/WEST ECOlution Shipping-optimised 4-in-1 cross braces Integrated Cable Routing Ballast pans 1020 kwp/40 t Clamping length 80 mm Middle clamp and end clamp 1640 kwp/40 t Via the ground profile Stability 597/lm Load transmission 150 mm 11 mm 787/lm East/West EVOlution Structure Preservation Mat Supporting area Ø [cm2] Supporting width Assembly time Features of high performance mounting systems SIMPLY THE BEST 0 9
PMT EVOLUTION EAST/WEST The uncompromising flat roof mounting system for photovoltaic large plants. Attack Angle 10 /15 Roof Covering Foil, bitumen, gravel, greening, sheet, concrete, open spaces Few Component Parts System Weight (Surface Weight) years Only 5 component parts per system Only 4 component parts per system 4.25 kg/m2 (10 ), 4.50 kg/m2 (15 ) 2.50 kg/m2 (10 ), 2.75 kg/m2 (15 ) warranty Material AntiWater-Technology 4 4-in-1 Cross Braces Interactive 3D system view www.pmt.solutions/en/products Detailed videos on the system www.pmt.solutions/en/fit-for-efficiency 8 Data sheets and assembly instructions on the system www.pmt.solutions/en/service-center/downloads Aluminium EN-AW-6063-T3 and stainless steel A2-70 No frost damage as no formation of back-water within the complete system Maximisation of the system stability No shifting while doing other work such as pulling cables and laying modules Fixed cable runs also in lateral direction Basis for optimal ballasting PMT Ballast Pan The PMT ballast pan was developed for optimal system ballasting of PV flat roof systems on gravelled or greened roofs with only low load reserves. The PMT ballast pan is inserted in EVOlution systems and filled with the existing bulk materials of the roof.
PMT ECOLUTION EAST/WEST Good value for money can be of premium-quality! The quality campaign against cheap flat roof systems. Attack Angle 10 /15 Roof Covering Foil, bitumen, gravel, greening, sheet, concrete, open spaces Few Component Parts System Weight (Surface Weight) years Only 5 component parts per system Only 4 component parts per system 3.0 kg/m2 (10 ), 3.25 kg/m2 (15 ) 1.25 kg/m2 (10 ), 1.5 kg/m2 (15 ) warranty 4 Material Aluminium EN-AW-6063-T3 and stainless steel A2-70 Drainage Unhindered roof drainage according to DIN 1986-100 4-in-1 Cross Braces Interactive 3D system view www.pmt.solutions/en/products Detailed videos on the system www.pmt.solutions/en/fit-for-efficiency 10 Data sheets and assembly instructions on the system www.pmt.solutions/en/service-center/downloads Maximisation of the system stability No shifting while doing other work such as pulling cables and laying modules Fixed cable runs also in lateral direction Basis for optimal ballasting
www.revocit.de The installation manual must be observed during assembly. This manual can be found under www.pmt.solutions/en/service-center/downloads or directly scan the QR code with your smart phone. (Requirements: Your mobile device must be equipped with an appropriate app) Your Premium Mounting Technologies Sales Partner SalesFolder-PMT-EN-V1 03/2015 Premium Mounting Technologies GmbH & Co. KG Energiepark 1 D-95365 Rugendorf, Germany Tel. +49 (0) 9223/945974-0 Fax +49 (0) 9223/945974-44 info@pmt.solutions www.pmt.solutions Further information: www.pmt.solutions Subject to technical changes. 2015 Premium Mounting Technologies GmbH & Co. KG SERVICE HOTLINE +49 (0) 9223/945 974-0