New consumer units. Design and functionality in plain sight. CONSUMER UNITS
A wide range of stylish solutions for any type of masonry or plasterboard wall. Consumer unit with white blind cover Consumer unit with smoky transparent cover The design: so modern and stylish, it deserves to be on display. Simple lines and a smooth profile with rounded corners: the design of these new flush mounting consumer units underlines the special attention paid to even the finest detail, helping them blend elegantly into the wall. For the whole range, the door comes in both the all-white version, which is camouflaged against the wall, and the extra stylish and sophisticated translucent smoky grey version. The flat internal panels offer perfect visual uniformity.
The range: comprehensive and suitable to satisfy all your installation requirements. Installed vertically, the new range is ideal for tight spaces, meeting a variety of needs. Boxes and consumer units are sold separately, so they can be installed in different phases. In addition to the modular structures with 8, 12, 24 and 36 modules, now 54 and 72 modules are available for large systems and home automation systems. The double line of flush mounting boxes can be installed in both masonry and plasterboard walls. And the many accessories facilitate the flush mounting, wiring and installation of individual components and entire banks either vertically or horizontally. A flexible choice. 8 12 24 (12 x 2) Aesthetic coordination. The modern design is a perfect match for all Vimar series. Eikon, Arké and Plana are naturally complemented by the new consumer units, which feature the unmistakable "Made in Italy" style showcased by all Vimar products. 36 (12 x 3) 54 (18 x 3) 72 (18 x 4) 1
Optimum versatility and attention to detail, even on the outside. 1 A single door with 180 opening. The perfect symmetry of the frame and box means the consumer unit only needs one door, which can be opened from the right or left just by rotating it. The 180 opening also facilitates access to the consumer unit, making installation easier and protecting it from accidental knocks. 2 Direct access to installed devices. Thanks to the removable panels, available for the 24+ modules range, there is no need to remove the frame and door to access the devices installed. 2
1 2 3 4 3 Dual closure: you choose. With the magnetic block, supplied as standard, or with a key-operated lock. To preserve the linear uniformity of the design or to ensure device access is limited to authorised personnel. 4 Simplified levelling. The retractable flap, when the consumer unit is installed, provides access to the fasteners without removing the frame, makes it much easier to level the framework. 3
More space for wiring inside, increased strength and easier installation. 5 4 6 1 2 3 6 1 More room for wires. 2 Easier mounting. 3 Perfect stability. Thanks to the greater flexibility and space offered by the new boxes, wires can now be routed on the bottom of the box and between the DIN modules and the frame. Frame assembly and levelling are made easier with a hole and slot which allows the frame to be attached to the box and adjusted. The extremely strong frame guarantees perfect stability, and is supplied preassembled with the frame and door. 4
4 Dual-depth DIN rails. The module DIN rails can be adjusted to two depths, to install both standard modules and deeper devices. 5 Doubles the space available for terminal blocks. The terminal block supports, fitted with special snap-fitting runners, can be fixed to the top and bottom walls. Boxes with more than 24 modules also have two dualdepth fasteners. 6 Installation in vertical and horizontal banks. A coupling flange hooks onto the bottom of the box so that several boxes can be installed in a vertical bank, for greater stability on the wall. However, a special joint, which attaches to the access holes for the corrugated conduits on the side wall, can be used to install several boxes in a horizontal bank, guaranteeing tightness and stability. 5
Boxes: for masonry and plasterboard walls, stronger and bursting with new features. A double range used for both masonry and plasterboard walls. In addition to great structural strength, the new flush mounting box for consumer units also offers a series of highperformance features that help the installer while construction work is being carried out. GENERAL FEATURES. Much more space. The new boxes offer much more space for wiring, especially at the top and bottom, helping the installer while construction work is being carried out. Removable part. The top and bottom walls can be removed completely for partial or total knockout, which allows the corrugated conduits to be fed through. 8 cm up to 36 modules 10 cm 54-72 modules Installation even in dividing walls. The different box depths - 8 cm for those up to 36 modules, 10 cm for those with more - allow safe installation even in non-load-bearing walls. Various access points for corrugated conduits. The numerous large knockout holes on the walls and on the bottom of the box mean that the corrugated conduits can be fed into the consumer unit quickly and easily, from any position. 6
FEATURES OF BOXES FOR MASONRY WALLS. Greater stability. The special shape of the box, specifically designed with side flanges, offers greater stability on the wall once construction work has been completed. Easier wiring. The top and bottom walls have grid knockouts that allow full or partial opening for the routing of various quantities of corrugated conduits. In any case, the residual profile preserves the strength and tightness of the box. Anti-mortar cover supplied. FEATURES OF BOXES FOR PLASTERBOARD WALLS. Fixing guaranteed, with no imperfections. The progressive tightening screws guarantee improved anchoring of the box in the wall. And to compensate for any imperfections in the hole in the plasterboard - while guaranteeing professional installation - additional lugs are also supplied; when hooked to the wall, they ensure perfect stability in front installations. Quick insertion of corrugated conduits. The knockout holes of various sizes in the top and bottom walls can be opened without tools and provide strong support for feeding corrugated conduits with a diameter of 25, 32 or 40 mm. In any case, the residual profile preserves the strength and tightness of the box. Wall drilling template supplied. 7
CONSUMER UNITS IP40 flush mounting consumer units Article Description V53108 V53108.B V53112 V53112.B V53124 V53124.B V53136 V53136.B V53154 V53154.B V53172 V53172.B 8 modules, complete with DIN (60715 TH35) rail, smoky-coloured transparent door As above, with white blind cover 12 modules, complete with DIN (60715 TH35) rail, smoky-coloured transparent door As above, with white blind cover 24 modules, complete with DIN (60715 TH35) rail, smoky-coloured transparent door As above, with white blind cover 36 modules, complete with DIN (60715 TH35) rail, smoky-coloured transparent door As above, with white blind cover 54 modules, complete with DIN (60715 TH35) rail, smoky-coloured transparent door As above, with white blind cover 72 modules, complete with DIN (60715 TH35) rail, smoky-coloured transparent door As above, with white blind cover V53108 V53124 Flush mounting boxes for IP40 consumer units in masonry walls Article Description V53308 V53312 V53324 V53336 V53354 V53372 Flush mounting box for 8-module consumer unit (GW 650 C) in masonry walls, blue Flush mounting box for 12-module consumer unit (GW 650 C) in masonry walls, blue Flush mounting box for 24-module consumer unit (GW 650 C) in masonry walls, blue Flush mounting box for 36-module consumer unit (GW 650 C) in masonry walls, blue Flush mounting box for 54-module consumer unit (GW 650 C) in masonry walls, blue Flush mounting box for 72-module consumer unit (GW 650 C) in masonry walls, blue V53312 V53324 Flush mounting boxes for IP40 consumer units in hollow walls Article Description V53708 Flush mounting box for 8-module consumer unit (GW 850 C) in hollow walls, blue V53712 Flush mounting box for 12-module consumer unit (GW 850 C) in hollow walls, blue V53724 Flush mounting box for 24-module consumer unit (GW 850 C) in hollow walls, blue V53708 V53736 Flush mounting box for 36-module consumer unit (GW 850 C) in hollow walls, blue V53754 Flush mounting box for 54-module consumer unit (GW 850 C) in hollow walls, blue V53772 Flush mounting box for 72-module consumer unit (GW 850 C) in hollow walls, blue V53712 8 For availability details, please contact the sales network
CONSUMER UNITS Accessories for IP40 flush mounting consumer units Article V53572 V53573 Description 12-module removable separator for 24- and 36-module consumer units, hooks onto the box, yellow 18-module removable separator for 54- and 72-module consumer units, hooks onto the box, yellow V53595 Box coupling joint for consumer unit, horizontal arrangement, yellow V53582 V53583 V53597 12-module removable conduit clamp flange, can also be used in vertical bank installations for 12-, 24- and 36-module consumer units, hooks onto the box, yellow 18-module removable conduit clamp flange, can also be used in vertical bank installations for 54- and 72-module consumer units, hooks onto the box, yellow Lock with key, in metal, for consumer units. Supplied with 2 keys V53572 V53595 V53599 Blank module strip for consumer unit, length 500 mm, white V53582 V53597 V53599 Terminal block support brackets and terminal blocks Article Description V53562 V53561 V53562 V53563 V53552 Removable terminal block support bracket for 8-module consumer unit, hooks onto the box, grey Removable terminal block support bracket for 12-, 24- and 36-module consumer units, hooks onto the box, grey Removable terminal block support bracket for 54- and 72-module consumer units, hooks onto the box, grey Removable screw terminal block with 6 holes for consumer unit, connection of wires from 1.5 mm 2 to 16 mm 2, quick coupling installation to the terminal block support bracket, blue V53552 V53552.V Removable screw terminal block with 6 holes for consumer unit, connection of wires from 1.5 mm 2 to 16 mm 2, quick coupling installation to the terminal block support bracket, green V53552.V 9
B.D15006 EN 1412 Viale Vicenza 14 36063 Marostica VI - Italy Tel. +39 0424 488 600 Fax +39 0424 488 188 www.vimar.com 10