i protect with TM SHRINK FILM brand performance shrink film brand shrink film 1
Exlfilm Shrink Film Manufactured by IPG for the most demanding markets Intertape Polymer Group began producing polyolefin shrink film in 1993. Over the past 24 years, we have been shrink wrapping products throughout the world with films produced at our manufacturing sites in the US and Portugal. Porto, Portugal Utah Manufacturing Plant In February 2013, IPG consolidated its North American shrink film production into one facility in Tremonton, Utah. This multi-million dollar expansion in extrusion, converting and warehousing positions IPG to grow with our North American partners for years to come. Continued capital expenditure and product development, within this world class facility, maintains the position of IPG and the Exlfim line as world leaders in shrink film performance technology. Tremonton, Utah Exlfilm shrink films are produced in a world class facility which operates under stringent ISO manufacturing practices and is certified to internationally recognized GFSI.
Exlfilm Markets Exlfilm HSP polyolefin shrink film is engineered to make your packaging look its absolute best, while providing unmatched value, versatility and durability. Pizza, High Speed Food Processors, Printers, CDs, DVDs, Gifts Exlfilmplus Markets Exlfilmplus films are crosslinked. The plus of crosslinking provides customers with a stronger film capable of working on a wider variety of equipment and sealing systems. Multipacking, Club Store Presentations, Pizza, Games, Printers, Consumer Products, Air Filters, Gifts, Automotive, Wood Products, Metals Crosslinking Technology This innovative technique makes Exlfilmplus Shrink Films one of the toughest and most versatile on the market. This is because the polymer chains are permanently bound into a network, significantly increasing their heat stability and strength. Our films have an inherently greater window of seal and shrink performance at a broader range of temperatures. Prevention of Buildup on wires and knives during sealing Prevention of Film Burn-Through in heat tunnels Increased Film Toughness on the finished package In Crosslinking Technology, bonds are created where molecules crosslink, resulting in a much stronger film. BENEFITS
Key Performance Features Exlfilmplus GPL, available in 35, 42, and 55 gauge, is the latest high performance, crosslinked polyolefin shrink film from IPG. Exlfilmplus GPL provides customers superior machinability, clarity and cost savings through higher yield. Exlfilmplus GPL s unique shrink characteristics make it the ideal choice for both general use and light force applications for printers, bakeries and such. Ultra Light Gauge BENEFITS Lowest Cost Per Package Excellent Machinability Superior Clarity and Gloss Minimal Shrink Force Consistently Strong Seals Crosslinked Technology Pre-perforated Film Available Available on 3in or 6in Core High Yield Wide Operating Window Minimal Shrink Force Exlfilmplus GPL lowered our cost per package as we moved from 45 gauge to IPG s new 35 gauge. GPL runs on our older equipment as well as the heavier gauge films. The film does not curl or bend our short stack packages. Commercial Printer Shrink Force Comparison GPL HSP GPS Characteristics Test Method Representative Values Gauge 35 42 55 Roll Length - Center Fold 7,500 6,250 4,770 Roll Length - Single Wound 15,000 12,500 9,540 Low Temperature Usage ( F) -45-45 -45 Shrink Temperature ( F) 240 340 240 340 240 340 Max. Storage Temp. ( F) 2 years max. 90 90 90 Haze % D1003 2.2 2.5 2.8 Gloss at 20 D2457 125 135 135 Coefficient of Friction (film to film), kinetic D1894 0.180 0.180 0.180 Oxygen Transmission Rate (cc/100 in²/24 hrs.) D3985 1550 1,100 1,100 Water Vapor Transmission Rate (g/100 in²/24 hrs.) F1249 1.07 0.810 0.740 MD TD MD TD MD TD Tensile Strength (PSI) D882 17,000 17,000 17,000 16,000 17,000 16,000 Elongation at Break (%) D882 100 110 115 125 130 140 Stiffness Modulus (PSI) D882 40,000 40,000 40,000 40,000 40,000 40,000 Unrestrained Shrink (%) @ 250 F D2732 72 72 72 72 72 72 Tear Propagation (g / ply) D1922 10 11 11 11 13 13 Note: These values are typical and not intended as limiting specifications. 4 TAPES & FILMS PACKAGING PRODUCTS & SYSTEMS BUILDING MATERIALS ENGINEERED COATED PRODUCTS
Key Performance Features BENEFITS Exlfilmplus GPS is a high performance crosslinked polyolefin shrink film. This multilayered film is versatile enough to perform on all sealing systems and shrink tunnels. The premium resin formulation provides our strongest seals ever. Exlfilmplus GPS offers high shrink force, making it the ideal choice for multipacking and unitizing product. Wide Window of Operation Superior Sealing Performance Higher Shrink Force Printable FDA Compliant Fully Recyclable Crosslinked Technology Pre-perforated Film Available Available on 3in or 6in Core Consistently Strong Seals Wide Operating Window High Shrink Force Our production was experiencing very high rejection rates due to poor sealing and uneven shrink. Switching to GPS not only fixed all the problems but produced a better looking package. Large Packaging Company Characteristics Test Method Representative Values Gauge 45 60 75 100 125 Roll Length - Center Fold 5,830 4,375 3,500 2,625 2,100 Roll Length - Single Wound 11,660 8,750 7,000 5,250 4,200 Low Temperature Usage ( F) -45-45 -45-45 -45 Shrink Temperature ( F) 240 340 240 340 240 340 240 340 240 340 Max. Storage Temp. ( F) 2 years max. 90 90 90 90 90 Haze % D1003 2.6 2.8 3.0 3.3 4.3 Gloss at 20 D2457 135 135 135 125 133 Coefficient of Friction (film to film), kinetic D1894 0.2 0.2 0.2 0.2 0.167 Oxygen Transmission Rate (cc/100 in²/24 hrs.) Water Vapor Transmission Rate (g/100 in²/24 hrs.) D3985 1050 980 915 860 800 F1249.800.715.651.620.600 MD TD MD TD MD TD MD TD MD TD Tensile Strength (PSI) D882 18,000 18,000 18,000 18,000 18,000 18,000 20,000 20,000 20,000 20,000 Elongation at Break (%) D882 115 125 120 130 130 135 140 150 150 150 Stiffness Modulus (PSI) D882 38,000 40,000 40,000 42,000 42,000 44,000 43,000 48,000 44,000 44,000 Unrestrained Shrink (%) @ 250 F D2732 65 65 65 65 65 65 65 65 65 65 Tear Propagation (g / ply) D1922 12 12 16 16 18 18 25 25 27 27 Note: These values are typical and not intended as limiting specifications. TM i protect with 888-898-7834 www.itape.com info@itape.com 2018 Intertape Polymer Group SHRINK FILM RV012318 5
Key Performance Features This fast-sealing film allows for short dwell times that maximize production and increase plant efficiency. Your product is protected from the rigors of high-speed packaging and shipping by consistently strong seals and exceptional tensile strength. The high slip ensures easier material handling, collating and package insertion. Great for computer software, DVDs, labels and more. Exlfilm HSP gets the job done fast and looks great too, with superior optics and shrinkage. Available in 50, 60, 75 and 100 gauge. Maximizes Production Rates Consistently Strong Seals Superior Optics Switching to this film allowed our operators to increase their line speeds by over 20%. That gave us the ability to increase our output and grow our business. Small Business Owner BENEFITS High Shrink Percentage High Slip Exceptional Tensile Strength and Tear Resistance Complies with FDA Standards Pre-perforated Film Available Available on 3in or 6in Core 6 Test Characteristics Representative Values Method Gauge 50 60 75 100 Roll Length - Center Fold 5,250 4,375 3,500 2,625 Roll Length - Single Wound 10,500 8,750 7,000 5,250 Low Temperature Usage ( F) -40-40 -40-40 Shrink Temperature ( F) 240 340 240 340 240 340 240 340 Max. Storage Temp. ( F) 2 years max. 90 90 90 90 Haze % D1003 2.3 2.8 3.2 3.5 Gloss at 20 D2457 125 115 115 115 Coefficient of Friction (film to film), kinetic D1894 0.25 0.25 0.25 0.25 Oxygen Transmission Rate (cc/100 in²/24 hrs.) D3985 527 431 344 333 Water Vapor Transmission Rate (g/100 in²/24 hrs.) F1249 1.91 1.52 1.179 0.93 Note: These values are typical and not intended as limiting specifications. MD TD MD TD MD TD MD TD Tensile Strength (PSI) D882-80 16,000 16,000 15,000 15,000 15,000 15,000 13,000 13,000 Elongation at Break (%) D882-80 120 120 120 120 140 140 140 140 Stiffness Modulus (PSI) D882-80 50,000 50,000 50,000 50,000 50,000 50,000 40,000 40,000 Unrestrained Shrink (%) @ 250 F D2732 55 58 55 58 55 58 55 58 Tear Propagation (g/ply) D1922 8 8 10 10 17 17 22 22
Shrink Film Sizing Charts FILM WIDTH FORMULA SEALER PACKAGE HEIGHT FORMULA Manual & Semi-Automatic L-Bar Sealer 0-2.5 W + H + 2 2.5-4.5 W + H + 2.5 4.5 + W + H + 3 Automatic L-Bar Sealer 0-3 W + H + 4 3-6 W + H + 4.5 6 + W + H + 5 to 6 CUT-OFF FORMULA (BAG LENGTH) PACKAGE HEIGHT FORMULA 0-2.5 L + H + 1 2.5-4.5 L + H + 1.5 4.5 + L + H + 2 MINIMUM GUARANTEED ROLL LENGTH 3 ID, 9.5 OD GUAGE 35 42 45 50 55 60 75 100 125 Single Wound 15,000 12,500 11,600 10,500 9,450 8,750 7,000 5,250 4,200 Center Folded 7,500 6,250 5,830 5,200 4,770 4,375 3,500 2,625 2,100 Parts Per Roll Roll length (ft) 12 Bag length (in) Cost Per Part Cost per roll Parts per roll
TM CORPORATE PROFILE Intertape Polymer Group Inc. (IPG ) is a recognized leader in the development, manufacture and sale of a variety of paper and film based pressure-sensitive and water-activated tapes, polyethylene and specialized polyolefin films, woven coated fabrics and complementary packaging systems for industrial and retail use. Headquartered in Montreal, Quebec and Sarasota, Florida, the Company employs approximately 2,500 employees with operations in 21 locations, including 13 manufacturing facilities in North America and one in each of Europe and Asia. i protect with 17 14 16 15 13 18 20 19 21 1. Ansonia, CT 2. Blythewood, SC 3. Brighton, CO 4. Carbondale, IL 5. Cornwall, ON 6. Danville, VA 7. Delta, BC 8. Johnson City, TN 9. Marysville, MI 10. Menasha, WI 11. Midland, NC 12. Montreal, QC 13. Montreal, QC 14. Rancho Cucamonga, CA 15. Sarasota, FL 16. Tampa, FL 17. Tremonton, UT 18. Truro, NS 19. Flensburg, Germany 20. Porto, Portugal 21. Daman, India Manufacturing Machine Assembly Distribution Corporate Headquarters Executive Headquarters 888-898-7834