Product Guide 2015 by RFID im Blick www.rfid-im-blick.com Product Guide 2015 Handout RFID Smart Cards by Heading for Success with the Right Product
RFID SMART CARDS Article written by
124 Product Guide 2015 RFID.. SMART CARDS by RFID im Blick Production Monitoring and Control Using to be on the Pulse of the Production Line With -transponders by AEG ID, ASYS developed an innovative system to control and monitor production lines Simon Arch Marketing & Sales Director AEG Identifikationssysteme GmbH Efficient manufacturing that can be comfortably managed, and that leads to high availability of the whole machine system that was the goal of machine building company ASYS when designing a new mobile system for the control and monitoring of whole production lines. Specifically, AEG ID developed -Transponders, which are a key element of the solution ASYS PULSE. At the same time, transponders must meet not only the high requirements of the design, but also applicationspecific and technological requirements. Mobile control for an efficient fabrication The ASYS Group develops and produces handling-, process-, and special purpose machines for the electronics and solar industries. Companies that make use of ASYS machines are dependent on high plant availability, due to the fact that these machines produce at an extremely high rate. Sometimes, 20 process steps in one line are done in only 10 seconds. In the past, an employee was notified with optic and acoustic signals if a failure occurred or there was no more material being supplied. In order to react quickly so as to prevent a longer down time of the machinery, numerous employees had the task of permanently supervising all of the production steps. In the eyes of ASYS, this method had potential for optimizing. Therefore, the concept of developing a mobile assistance system for the control and monitoring of production lines via tablet was born. The system makes all relevant information of all modules in one line clearly and graphically available, so that production employees can quickly react to standstills and plan routine tasks proactively. Industry 4.0 communication via -transponder In order to identify individual production modules quickly, easily, and above all reliably, ASYS equipped every ASYS Pulse production line module with an RFID transponder. Since tablets are used for the display and control of the production line, the usage of -technology suggested itself. The -transponder applied directly to the module has multiple purposes: on one hand, necessary information such as machine type, serial number, software version and log files can be saved directly onto the module, therefore, the transponder takes the role of an electronic type plate. On the other With, the efficiency of complex production lines can be significantly increased. hand, the transponder makes the identification by the employee possible. As soon as a transponder is identified by the tablet s reader, error and status messages can be sent to a pre-defined email address with only a few clicks. Regarding industry 4.0 concepts, a new communication between men and machine is formed via and tablet. Efficient manufacturing is made possible Apart from the additional benefits of all machine module data being available directly at the production line, for example for maintenance and servicing processes, the focus of ASYS PULSE lies on increasing efficiency of the production lines. Without a mobile control and monitoring system, multiple signal systems are required to point error and status messages out to production employees. However, using ASYS PULSE, employees can work more flexibly and efficiently, and companies can save equipment at the production line. Before, various elements generating signals and touchscreens were needed for controlling, but now, using the mobile system, only the statutory start-stop and the emergency-stop button are required.
Product Guide 2015 RFID.. SMART CARDS by RFID im Blick 125 of the machine modules will be prevented even if employees touch the transponder with the tablet. Due to that fact that AEG ID develops and produces all transponders in-house, the customers are free in their choice of shape and graphical design of the - or -transponders. Therefore, with the 3D logo transponder, all requirements of function and design can be met, even in the shortest time possible. Less than one week after the first consultations, AEG ID delivered test samples to ASYS, which were quickly approved and subsequent production began. All data at a glance: The transponders from AEG ID enable the fast and reliable identification of individual modules. High-value -transponders for high-end production lines Apart from technological features, such as -transponders having to have a comparatively high reading ranges of between five to ten centimeters and having to be applicable to metal, the requirements for transponders for this application include the design and the selection of the surface material. These requirements had functional as well as nonfunctional reasons: on one hand, -transponders should fit optically to the high-value machine modules from ASYS. The idea was that the label should have the shape of a button on a tablet to create a visual link to apps on mobile devices. Due to its raised superstructure, the 3D logo transponder protects the tablet because the contact to the metal or the edges Flexible -solution for the global use The 3D logo transponders are not only available in HF and LF version, but also in with both technologies even in small batch sizes.the process s reliable reading range with a handheld reader is about five centimeters. AEG ID can produce transponders that are applicable to metal objects, as well as those that are applicable to non-metal objects. Therefore, 3D logo transponders are the base of solutions for usage in various manufacturing companies, such as the pharmaceutical or automotive industries. The ASYS-solution was brought to market in May 2014 and numerous customers of ASYS are already using it on their production sites. The flexibility of the solutions was additionally increased by the fact that machines from third-party manufactures can be integrated without problems. About AEG ID AEG ID, a leading global supplier of RFID technology, designs and manufactures a comprehensive portfolio of tags and readers for a broad range of markets and applications. AEG ID has vast experience in this industry as it has been developing and producing its RFID devices since 1989. AEG ID now has the capability to produce customized transponders and readers to meet the specifications of virtually any low, high, and ultrahigh frequency RFID project. AEG ID targets three main market segments: animal identification, industry & logistics, and access control. By providing a range of transponders in various shapes and packaging materials (plastic and glass), as well as fixed and handheld readers, they can specifically cater for each market segment. Applications range from industrial automation, production control, keg identification, waste handling and logistics, to access control, animal identification, sports timing, and event management. AEG ID currently employs 110 people at its headquarters in Ulm, Germany and its production plant in Vrchlabi, Czech Republic. AEG ID has the capacity to produce 50 million transponders a year and operates worldwide through a network of regional and local sales & service partners. www.aegid.de
126 Product Guide 2015 RFID.. SMART CARDS by RFID im Blick Design Technical Data www.aegid.de The AEG ID 3D logo transponder fits perfectly applications and is available as standard or on-metal version. The tranpsonder comes with a sticky back to be attached easily on the product to be identified. Active Passive Chips, Transponders and Data Loggers www.rako-security-label.com www.samsung.com/ semiconductor The RFID Tag fits perfect to the modern generation of smart phone users. The tag is available in customized form factors and also as on metal version. Optional is printing and programming possible. Samsung Electronics new near field communication () chip with Embedded Flash, the S3FWRN5, features high radio frequency (RF) performance and small package size. The S3FWRN5 s RF performance doubles the range in both reader and card emulation modes, when compared to that of its predecessor, the S3FNRN3. Active Passive Active Passive www.triovacos.de The NST-MS10 is a data logger to be used intuitively in multi-purpose applications. Collected data is transmitted wirelessly via the interface of the data logger to enabled mobile devices for further processing and visualization using dedicated application software. These data can be distributed worldwide by using the already existing infrastructure of the mobile telecommunication networks. Active Passive
Product Guide 2015 RFID.. SMART CARDS by RFID im Blick 127 Features Technology Applications 3D Logo Transponder 3D Logo Transponder The AEG ID 3D Logo transponders are available with LF, HF or a combination of both frequencies. The shape, size and design can be defined by the customer and is available already in small batches. Service & Inventory Industrial automation Production equipment Tool management Pharma 3D Logo Transponders from AEG ID combine function and design Tapme Tags RAKO RFID Tag The user can program the Rako RFID Tag with their Smartphone. The Tapme Tags are readable and writable with every smart phone. The Chip is reprogrammable up to 100.000 times and readable with no limit. Activation of Smartphone profiles Loading play lists Programming your clock Start navigation Enable/Disable WLAN/ Buetooth Chip S3FWRN5 Samsung s S3FWRN5 is the industry s smallest stand-alone IC with a mere package size of 2.4mm x 2.4mm from a 45nm e-flash process, consuming 25% less power by adopting low power sensing (LPS). The e-flash portion can be safely modified through firmware updates and it enables mobile device makers to reduce the development time in comparison to solutions based on read-only memory (ROM). Mobile Devices Application as a standalone IC or System-in-Package (SiP) with embedded secure element (ese) NST-MS10 NST-MS10 The NST-MS10 includes three sensor elements for the measurement of temperature, humidity and shock. The housing of the transponder meets the requirements of protection class IP54. Its modular design allows for customer specific adaption with regard to sensor elements, housing and form factor. Disposable variants are available as well. Logistics Service and maintenance Facility management
128 Product Guide 2015 RFID.. SMART CARDS by RFID im Blick Profile Solution Technical Data www.comprion.com COMPRION is the worldwide leading manufacturer of test solutions for terminals and smart cards covering contact-based and contactless technologies. Our standardization activities enable us to integrate the latest standards into our products. As COMPRION systems are renowned for precise measurement capabilities, the company serves all top handset, card, chipset manufacturers, MNOs and test houses. Our portfolio covers simulators and monitoring tools for Analog layer Protocol layer Transport layer Application layer Solutions www.exceet-card-group.com We manage and automate your complex processes thanks to M2M solutions - from benefits analysis to hardware selection to systems operation. Additionally, we advise you on matters of information security, certification and compliance, and offer customized services to safeguard your business processes. Active Passive www.legic.com LEGIC is an international network of over 250 companies and experts for contactless people identification. Our holistic offering includes transponder chips, reader chips, software and services, consulting for end users and support to our licensees. We are driven by the vision to enhance a secure and simpler life for people and organisations. Swiss company Investment protection Scalable security Unique Master-Token System-Control (MTSC) Reader www.feig.de HF: cvend plug cvend plug is a module for secure contactless payment and ticketing in moving vehicles of public transport systems. It supports fare collection by check-in / check-out and was designed for credit cards and public transport tickets. cvend plug enables flush integration into validators and on board computers of buses and trains.
Product Guide 2015 RFID.. SMART CARDS by RFID im Blick 129 Features Technology Applications Forum Analog Test Solution UT³ Platform is the core of our highly precise Forum Analog Test Solution supporting conformance test cases for contactless interfaces. Its capabilities stretch from RF analog to digital and application level testing. UT³ Platform can emulate either the poller or the listener side or simply trace data exchange. Forum Analog Test Solution Forum approved RF, digital, LLCP, SNEP Automated by robot Suited for 24/7 usage emis Token Token emis can be equated with a virtual identity, offering definitions for personalized access and authentication profiles via a multifunctional token. It is equipped with the latest contactless technologies (RFID/, Bluetooth) and compatible with all devices. emis acts independently of operating system (ios, Android, Windows), making it an efficient, holistic, cross-sector solution. Examination of identifi cations and authentications Building access Access control to pc data transactions Data collection LEGIC IDConnect LEGIC IDConnect is a secure end-to-end service for the creation and instant deployment of ID cards on mobile phones. Its independent features include advant, mifare, and BLE as well as its openness in respect of Mobile Network Operators, SIM suppliers, TSM vendors and wallet providers makes IDConnect simple to integrate into existing installations. Access control Time & attendance Cashless payment e-ticketing Parking Leisure cvend plug Beside cvend plug, cvend box is available for integration in metallic environments like kiosk systems and vending machines. cvend plug and cvend box can be ordered in 2 variants: as a flexible platform for customer applications or as a secure contactless reader with credit card and ticketing support. Payment systems Secure contactless payment & ticketing for vehicle applications: cvend plug.