walraven.com Walraven Support System A solid and reliable foundation for any Strut based installation
Walraven Support System A solid and reliable foundation for any Strut based installation BIS Yeti 480 BIS Ursus BIS Yeti 335 No drilling required Prevents penetration of roof membrane and reduces the risk of leaks. Saves time and money Easy to use modular support system. Recyclable Mounting units are made of recycled weather resistant materials and also UV resistant materials. Sound & vibration proof With non-slip anti-vibration mat. 03/2016 - Subject to modifications 2
Extensive system Optimal protection The products are used in combination with the BIS RapidStrut fixing system. Including BIS RapidStrut 41 x 41 Rail, BIS RapidStrut DS 5 41 x 51 Rail and a broad range of accessories. All products are suitable for indoor and outdoor use. The BIS UltraProtect 1000 surface protection provides an extreme corrosion resistance. Project Engineering Walraven offers a wide range of technical services, such as: calculation and engineering support construction design prefabrication service on-site construction support Based on technical requirements and a roof plan our Technical Support team is capable to provide a quotation and technical advice. 3
BIS Yeti 480 For flat and low pitched roofs and high loads 03/2016 - Subject to modifications 4
Highly adjustable for precise positioning 360 7 360 rotatable insert Adjustable to compensate roof pitch up to 7 Suitable for high loads With non-slip anti-vibration mat Optional stackable ballast block to increase stability Technical data mouldings made of WPC, a composite of recycled plastic and wood fibre resistant to UV and chemical influences (2x) (2x) (2x) # 6768 5 001 # 6768 5 101 # 6768 5 401 (6x) (6x) (6x) # 6768 5 301 BIS Yeti 480 vertical 480 x 480 mm BIS Yeti 480 horizontal 480 x 480 mm Ballast Block, 8 kg, 100 x 380 x 110 mm BIS Yeti 480 H-set: 2x BIS Yeti vertical, 2x BIS Strut Rail End Cap, 2x BIS RapidStrut Connector 90 + fixing materials. (6x slide nuts, hexagon head bolts and washers) Maximum allowed loads The maximum allowed load is tested on a flat concrete under straight load. For technical support or advice on these products applied to any other than concrete floors please contact our project engineers. 900 N 50 Nm 2.500 N! 2.500 N * In combination with BIS RapidStrut Rail. Tel. +31 (0)297 23 30 00 walraven.com 5
BIS Yeti 335 For flat roofs 6
Highly adjustable for precise positioning 360 360 rotatable insert With non-slip anti-vibration mat Technical data mouldings made of WPC, a composite of recycled plastic and wood fibre resistant to UV and chemical influences (2x) (2x) (2x) # 6768 5 201 (6x) (6x) (6x) # 6768 5 301 BIS Yeti 335 335 x 335 mm. For horizontal and vertical use. BIS Yeti 335 H-set: 2x BIS Yeti 335, 2x BIS Strut Rail End Cap, 2x BIS RapidStrut Connector 90 + fixing materials. (6x slide nuts, hexagon head bolts and washers) Maximum allowed loads The maximum allowed load is tested on a flat concrete under straight load. For technical support or advice on these products applied to any other than concrete floors please contact our project engineers. 900 N 50 Nm 2.000 N! 2.000 N * In combination with BIS RapidStrut Rail. Tel. +31 (0)297 23 30 00 walraven.com 7
BIS Ursus Foot For linear installation systems 8
With included BIS RapidStrut Rail For linear installation with the BIS RapidStrut System High corrosion resistance; stands min. 1,000 hours salt spray test Technical data material: vulcanized rubber, black; Strut Rail made of steel 1.0242 resistant to UV and chemical influences 1. BIS Ursus 250 x 130 mm - # 6768 7 250 2. BIS Ursus 400 x 130 mm - # 6768 7 400 3. BIS Ursus 600 x 240 mm - # 6768 7 600 1. 2. 3. Maximum allowed loads The maximum allowed load is tested on a flat concrete under straight load. For technical support or advice on these products applied to any other than concrete floors please contact our project engineers.! 1.000 N (# 6768 7 250) 2.000 N (# 6768 7 400) 3.000 N (# 6768 7 600) * In combination with BIS RapidStrut Rail. Tel. +31 (0)297 23 30 00 walraven.com 9
Multipurpose setup of rooftop installations Below are some examples of applications with service platforms, step overs and supports for cable trays. There is no need to drill holes in the roof as the products are all non-roof penetrating making it a safe and convenient inspection route and safer product installation. Service platforms Step overs 10
Support for cable trays 11
BIS RapidStrut System For all medium and heavy rail applications. New! Insert, turn 1/4 stroke, slide and lock! Fast and easy The accessories are pre-assembled and delivered 'ready to use' on site. The plastic spring allows the slide nut to be fixed easily into the rail, retaining the assembly in place before final tightening. Extensive system The BIS RapidStrut fixing system offers an extensive choice for rail profiles and cantilever arms. A broad range of accessories are also available including: slide nuts, T-bolt assemblies and swivel hangers. BIS RapidStrut Fixing Rail DS 5 The DS 5 has a unique hole pattern allowing BIS RapidStrut Accessories to be mounted quickly on both sides of the rail. For indoor and outdoor use Extreme corrosion resistance. For a complete overview and more info: www.walraven.com/int/bis-ultraprotect Walraven Spectrum PV Mounting System for flat and shallow pitched roofs Solid construction 'Plug and play' assembly Minimal ballast Ballasted, non-penetrating system Walraven Support System (EN-INT) - 04/2016 - pdf Subject to modifications Other countries Walraven International P.O. Box 15 3640 AA Mijdrecht (NL) Tel. +31 (0)297 23 30 00 Fax +31 (0)297 23 30 99 export@walraven.com Walraven Group Mijdrecht (NL) Tienen (BE) Bayreuth (DE) Banbury (GB) Malmö (SE) Grenoble (FR) Barcelona (ES) Kraków (PL) Mladá Boleslav (CZ) Moscow (RU) Kyiv (UA) Detroit (US) Shanghai (CN) Dubai (AE) Budapest (HU) walraven.com