VEGA luminaire is Megalite state of the art design for flood light and street light application. Durability, High ingress protection (IP), various choices of reflectors to suit different lighting application, the aerodynamic shape, and the various mounting possibility on the ground, walls, pole, etc. are among the highlights of VEGA. VEGA is manufactured under Megalite precise quality control according to European norm: IEC 60598. 1
Application Depending upon the choice of reflector matching the lighting application, VEGA would be suitable for floodlight purposes, roadway and high way applications with high ingress protection. Technical Data Body: Gray powder coated high pressure die-cast aluminium Electrical compartment cover: Gray powder coated high pressure die-cast aluminium with flat clear tempered glass Latch: Ergonomic high pressure die-cast aluminium latch for easy access to electrical components without tools Handle: Sturdy swivel base with graded scale and Dacromet coated bolts for adjusting the floodlight to the desired angle Reflectors: Post-anodized aluminium symmetrical reflector with smooth surface (A) Pre-anodized semi-specular symmetrical aluminium reflector (B) Pre-anodized hammer tone symmetrical aluminium reflector (C) Post-anodized aluminium reflector with smooth surface (F) Pre-anodized hammer tone asymmetrical aluminium reflector with smooth surface (G) Pre-anodized semi-specular asymmetrical aluminium reflector (H) Post-anodized aluminium reflector with smooth surface (L) Pre-anodized bright hammer tone asymmetrical aluminium reflector (M) Pre-anodized semi-specular asymmetrical aluminium reflector with smooth surface (N) Post-anodized symmetrical aluminium reflector (K) Diffuser: Flat clear tempered glass with 5mm thickness Gasket: High quality specially designed silicon gasket with durability against heat and pressure Connections: Exterior Dacromat screws with interior galvanized Control gear box: Powder coated high pressure die-cast aluminium control gear box for high ambient temperature conditions (max. ambient temperature 60 C) M310...HT Electrical components: High power factor constant current electronic driver Electromagnetic ballast Superimposed ignitor for high pressure sodium and metal halide lamps holder: Porcelain E27/E40 lamp holders, T270 Ceramic RX7S lamp holders, T350 Single core solid conductor made of copper with silicon insulation for HID lamps Polyamide 3 poles socket and plug Parallel power factor correction capacitor Two special glands for cable looping Ordering Options: Power reduction switching system Accessories (Refer to pages 13-14) 2
() () M310A250M M310A250S M310A250M/MH M310A400S M310A400M/MH M310A600S 250 HM 250 HS/HI 250 HI 13.7 14.7 13.7 16.1 14.6 19.1 M310A400SHT M310A400M/MHHT M310A600SHT 20.0 18.5 22.7 Reflector (A): Post-anodized aluminium symmetrical reflector with smooth surface, narrow beam angle, and high efficiency appropriate for normal floodlight application. * M310A250S 250 500 750 1000 1250 M310A400SHT 250 500 750 1000 1250 * For (M310A250M/MH) model 55o 60 o 55 o 60 o 60 o M310...HT 55 o 55 o 95 o 55 o 95 o 95 o 55o M310... Adjustable lighting direction with multiples of 5 o scaled positioning 3
() () M310B250M M310B250S M310B250M/MH M310B400S M310B400M/MH M310B600S 250 HM 250 HS/HI 250 HI 13.3 14.2 13.3 15.6 14.2 18.7 M310B400SHT M310B400M/MHHT M310B600SHT 20.6 19.1 23.4 Reflector (B): Pre-anodized semi-specular symmetrical aluminium reflector with wide beam angle and high efficiency resulting in high output appropriate for normal floodlight application. * * M310B400S M310B400SHT HI s 160 100 320 200 480 300 640 400 800 500 * 250 lamps only Specially designed silicon gasket ensures long lasting high ingress protection-ip Ergonomic high pressure die-cast aluminium latch and clear flat tempered glass 4
() () M310C250M M310C250S M310C250M/MH M310C400S M310C400M/MH M310C600S 250 HM 250 HS/HI 250 HI 13.2 14.3 13.2 15.7 14.1 18.6 M310C400SHT M310C400M/MHHT M310C600SHT 20.8 19.3 23.8 Reflector (C): Pre-anodized hammer tone symmetrical aluminium reflector with wide beam angle and high efficiency resulting in high output appropriate for normal floodlight application. * * M310C250S M310C400SHT 120 100 240 200 360 300 480 400 600 500 * 250 lamps only 5
() () M310F250M M310F250S M310F250M/MH M310F400S M310F400M/MH M310F600S 250 HM 250 HS/HI 250 HI 13.5 14.7 13.5 16.0 14.4 19.2 M310F400SHT M310F400M/MHHT M310F600SHT /HI 20.0 18.5 23.0 Reflector (F): Post-anodized aluminium reflector with smooth surface, uniform light distribution, and high efficiency appropriate for roadway lighting application. * * M310F250M 50 100 150 200 250 M310F400SHT 40 80 120 160 200 * 250 lamps only Very sturdy steel handle connected to the floodlight with Dacromet coated screws and with graduated scale for well controlled angle adjustment. 6
() () M310G250S M310G250M/MH M310G400S M310G400M/MH M310G600S 250 HS/HI 250 HI 14.3 13.2 15.7 14.1 18.9 M310G400SHT M310G400M/MHHT M310G600SHT 20.7 19.2 23.6 Reflector (G): Pre-anodized hammer tone asymmetrical aluminium reflector with smooth surface and high efficiency resulting in high output appropriate for lighting objects as floodlight. M310G250S M310G400SHT 200 120 400 240 600 360 800 480 1000 600 Easy access to electrical components without tools requirement 7
() () M310H250S M310H250M/MH M310H400S M310H400M/MH M310H600S 250 HS/HI 250 HI 14.1 13.0 15.7 14.0 18.5 M310H400SHT M310H400M/MHHT M310H600SHT 20.4 18.9 23.1 Reflector (H): Pre-anodized semi-specular asymmetrical aluminium reflector with high efficiency resulting in high output appropriate for lighting objects as floodlight. M310H600S 200 400 600 800 1000 M310H400SHT 120 240 360 480 600 3 pole socket and plug for easy connect/disconnect of the mains voltage for service and maintenance 8
() () () M310SM70S M310SM150S 70 HS/HI-DE 150 HS/HI-DE 6.6 7.2 M310SN70S M310SN150S 70 HS/HI-DE 150 HS/HI-DE 6.6 7.2 M310SK70S M310SK150S 70 HS 150 HS 6.2 6.6 Reflector (M): Pre-anodized bright hammer tone asymmetrical aluminium reflector with high efficiency resulting in high output appropriate for lighting objects. Reflector (N): Pre-anodized semi-specular asymmetrical aluminium reflector with smooth surface and high efficiency resulting in high output appropriate for lighting objects. Reflector (K): Post-anodized symmetrical aluminium reflector with high efficiency and very narrow beam angle appropriate for normal floodlight application. M310SM150S 160 320 480 640 800 M310SN150S 160 320 480 640 800 M310SK70S 500 1000 1500 2000 2500 Available also in black & gray white powder coated finishing. (M310SM...-BL), (M310SN...-BL), (M310SK...-BL), (M310SM...-), (M310SN...-), (M310SK...-) 9
M310SL50S M310SL70MH M310SL70S M310SL125M M310SL150S M310SL150MH () 50 HS 70 HI 70 HS 125 HM 150 HS 150 HI 6.4 6.5 6.5 6.2 7.4 7.2 Reflector (L): Post-anodized aluminium reflector with smooth surface, uniform light distribution, and high efficiency, appropriate for roadway lighting application. * M310SL150S 60 120 180 240 300 * Except for (M310SL150S) 60 o 100 o 60 o 100 o 100 o 60 o Adjustable lighting direction with multiples of 5 o scaled positioning Available also in black & gray white powder coated finishing. (M310SL...-BL), (M310SL...-) 10
Accessories PTV1E-Bracket VEGA 1-way mounting bracket with the connection parts PTV2BE-Bracket VEGA 2-way (90 o ) mounting bracket with the connection parts PTV2AE-Bracket VEGA 2-way (180 o ) mounting bracket with the connection parts PTV3AE-Bracket VEGA 3-way (120 o ) mounting bracket with the connection parts Specially designed galvanized steel pole brackets with the connection parts are available in 5 models for mounting up to four luminaires on a single pole. Quick and easy wiring by utilization of the wire terminal block located within the main housing. 11
PTV2C-Bracket VEGA 2-way (180 o ) mounting bracket with the connection parts PTV4E-Bracket VEGA 2-way (90 o ) mounting bracket with the connection parts PD56-BRACKET Pole mounting aluminium steel brackets for mounting on poles with 5 and 6 cm diameters PD34-BRACKET Pole mounting aluminium brackets for mounting the luminaire on poles with 3 and 4 cm diameters Mounting Symbols all mounting with bracket Mounting height range (Horizontal) Surface mounting all mounting Ground mounting 12
Megalite, FZCO P.O. Box 61440 Jebel Ali Free Zone Dubai, UAE Tel: +971 4 881 7900 Fax: +971 4 881 8850 Email: info@megalite.com eb Site: www.megalite.com 7008000609