SPECIALTY ABRASIVE PRODUCTS THAT TARGET SPECIFIC NEEDS AND APPLICATIONS.

SPECIALTY ABRASIVE PRODUCTS THAT TARGET SPECIFIC NEEDS AND APPLICATIONS. PEARL ABRASIVE CO. IS DEDICATED TO DEVELOPING A SPECIAL LINE OF VISIONARY PRODUCTS AND TARGETED SOLUTIONS. Our differentiated or specialty products are designed to meet specific needs and applications of manufactures, fabricators, installers or contractors. Pearl has designed and produced these products utilizing the most advanced technology and foremost abrasive grain mixtures that target specific applications. These unique products are manufactured to provide optimal performance, quality and value. make it a pearl.

REDLINE MAX A.O. DEPRESSED CENTER GRINDING WHEEL HIGH PERFORMANCE ALUMINUM OXIDE. 33% more efficient THAN STANDARD ALUMINUM OXIDE METAL IRON STEEL FERROUS METALS HARD MATERIALS How does the MAX A.O. compare to other aluminum oxide wheels? High performance products usually come with a high price. Not the Redline MAX A.O. It was specifically designed to offer aluminum oxide users a high performance alternative at a standard performance price. The Redline MAX A.O. wheel does this through a unique combination of grain properties and resin bond technology that truly sets it apart from the competition. 5 reasons the Pearl Redline Max A.O. grinding wheel outperforms standard aluminum oxide: FRIABILITY LOADING 1. Pearl s innovative MAX A.O. super grain is highly efficient. MAX A.O. is a hybrid grain mixture with unique crystalline properties that enable individual grain particles to remain extremely sharp and durable. The MAX A.O. grain has excellent friability characteristics that allow for optimally-timed fracturing of abrasive crystals, constantly exposing sharp cutting edges to the work surface. The result is significantly increased efficiency and performance when compared to traditional aluminum oxide wheels. 2. Less vibration. The Redline MAX A.O. wheel s combination of a proprietary bonding system and the MAX A.O. grain create a wheel that offers near perfect balance, with significantly less vibration or wheel chatter. This is extremely helpful in improving grinding efficiency and grinding speed. It is also very helpful in making the wheel user friendly, decreasing both operator fatigue and wear on the angle grinder. 3. Cooler grinding. Because the Redline MAX A.O. wheel runs significantly cooler than standard grinding wheels, it is ideal for applications in which burning the material can be a problem. The MAX A.O. wheel dissipates heat better than standard aluminum oxide grinding wheels, resulting in increased performance and less chance of marring the workpiece. 4. Non-loading. The multiple cutting edges of the MAX A.O. grain combined with the enhanced resin mixture result in stock removal rates that are significantly higher than standard grinding wheels. In addition, the constant renewal of fresh cutting edges greatly decreases wheel loading, ensuring consistent performance. 5. Increased grinding efficiency. YOUR TIME IS VALUABLE! Manufacturers are constantly searching for ways of increasing productivity and are using efficiency ratings and production output to judge the effectiveness of abrasive products. The Pearl Redline MAX A.O. wheel has been designed with grinding efficiency in mind, providing greater productivity for the operator. OUTPERFORMS THE COMPETITION! GRINDING RATIO PEARL REDLINE Gemini Sait Grind A24N-BF Fast Grind A30S Universal Line A24L PSF Xpert A30BF Pearl Redline has the best Price/Performance ratio on the market! DCRED40 4" x 1/4 x 5/8 A/WA24R 13,700 DCRED45 4-1/2" x 1/4 x 7/8 A/WA24R 13,300 DCRED45H 4-1/2" x 1/4 x 5/8-11 A/WA24R 13,300 DCRED50 5" x 1/4 x 7/8 A/WA24R 12,000 DCRED50H 5" x 1/4 x 5/8-11 A/WA24R 12,000 DCRED70 7" x 1/4 x 7/8 A/WA24S 8,500 DCRED70H 7" x 1/4 x 5/8-11 A/WA24S 8,500 DCRED90 9" x 1/4 x 7/8 A/WA24S 6,500 DCRED90H 9" x 1/4 x 5/8-11 A/WA24S 6,500 FOR PIPELINE DCRED45P 4-1/2" x 1/8 x 7/8 A/WA30S 13,300 DCRED45PH 4-1/2" x 1/8 x 5/8-11 A/WA30S 13,300 DCRED50P 5" x 1/8 x 7/8 A/WA30S 12,000 DCRED50PH 5" x 1/8 x 5/8-11 A/WA30S 12,000 DCRED70P 7" x 1/8 x 7/8 A/WA30S 8,500 DCRED70PH 7" x 1/8 x 5/8-11 A/WA30S 8,500 DCRED90P 9" x 1/8 x 7/8 A/WA30S 6,500 DCRED90PH 9" x 1/8 x 5/8-11 A/WA30S 6,500

SRT SERIES DEPRESSED CENTER GRINDING WHEEL it s all about the grain... FASTEST WHEEL ON THE MARKET OUTPERFORMS ZIRCONIA HIGH TENSILE ALLOYS How does SRT compare to other stainless steel grinding wheels? Engineering products based on SRT Technology has brought about astounding results. It is not uncommon to get as much as 40% increased grinding efficiency. This is the result of the unique characteristics of Pearl s proprietary SRT grain and bond mixture. 5 reasons that SRT gets the best results: CONTAMINATE 1. Engineered grain. Most abrasive products are manufactured using the traditional trial and error method of bond development. SRT grain has been engineered to last longer and consistently produce the highest quality finish of any product on the market today. 2. Binding element. The proprietary bonding agents used to produce SRT products give the SRT grain its unique color, as well as providing more strength and durability to the wheels. This in turn lessens the vibration the operator feels and improves the overall efficiency of the product. 3. Heat buildup. Heat buildup causes an undesirable finish, SRT products have been engineered to run considerably cooler than competitive products in the field. Better heat disbursement increases the performance as well as the appearance of the completed work. 4. Non-contaminating. Pearl's SRT grains are harder than other abrasive grains therefore they can penetrate and cut even the hardest materials such as stainless steel without contamination. 5. Superior quality finish. Pearl's SRT grains remain consistently sharp thus enabling the wheel to produce a consistent finish with increased grinding efficiency. OUTPERFORMS THE COMPETITION! STOCK REMOVAL (g) 0 50 100 150 200 250 300 350 400 PEARL DCSRT Norton Norzon Walter A30SS Pferd Inox Rexcut A36GFX DCSRT40 4 x 1/4 x 5/8 SRT24 13,700 DCSRT45 4-1/2 x 1/4 x 7/8 SRT24 13,300 DCSRT45H 4-1/2 x 1/4 x 5/8-11 SRT24 13,300 DCSRT50 5 x 1/4 x 7/8 SRT24 12,000 DCSRT50H 5 x 1/4 x 5/8-11 SRT24 12,000 DCSRT70 7 x 1/4 x 7/8 SRT24 8,500 DCSRT70H 7 x 1/4 x 5/8-11 SRT24 8,500 DCSRT90 9 x 1/4 x 7/8 SRT24 6,500 DCSRT90H 9 x 1/4 x 5/8-11 SRT24 6,500 Sait Attacker

D.A. SERIES DEPRESSED CENTER GRINDING WHEELS DO YOU NEED TO GRIND ALUMINUM? DON'T RISK DAMAGING YOUR HIGH COST MATERIALS WITH GENERAL PURPOSE WHEELS. ALUMINUM COPPER BRONZE BRASS SOFT NON-FERROUS METALS To overcome performance hurdles when grinding aluminum, Pearl engineered a grinding wheel with proprietary innovations that address this specific challenge. General purpose grinding wheels do not perform at optimal levels when used on soft non-ferrous metals. The reasons are: Loading of the wheel results in slow grinding speeds. Dulling of abrasive grains diminish grinding efficiency. Heat buildup reduces grinding efficiency and affects material surface. 4 reasons to buy Pearl D.A. Series wheels: LOADING 1. Pearl s D.A. grain. Pearl s D.A. Series grinding wheels are specially formulated to address the specific challenges of grinding soft nonferrous metals. Pearl's proprietary D.A. abrasive grain and bonding agents are manufactured at high temperatures to improve hardness and friability, this results in significantly improved wheel performance and life. 2. Enhanced surface finish. Pearl's proprietary bonding agent allows the cutting edge of the grains to remain sharp, while at the same time allowing the wheel to run cooler. 3. Non-loading. Pearl s D.A. Series wheel is a grinding wheel that is both non-loading and highly efficient. D.A. wheels are designed for aggressive and consistent stock removal, as well as giving the workpiece an optimal surface finish. 4. Increased grinding efficiency. The D.A. Series is designed for both aggressive stock removal and one step finishing. OUTPERFORMS THE COMPETITION! STOCK REMOVAL (g) 0 25 50 75 100 125 150 PEARL D.A. SERIES DA4030 4 x 1/4 x 5/8 AL24M 13,700 DA4510 4-1/2 x 1/4 x 7/8 AL24M 13,300 DA4510H 4-1/2 x 1/4 x 5/8-11 AL24M 13,300 DA5010 5 x 1/4 x 7/8 AL24M 12,000 DA5010H 5 x 1/4 x 5/8-11 AL24M 12,000 DA7020 7 x 1/4 x 7/8 AL24M 8,500 DA7020H 7 x 1/4 x 5/8-11 AL24M 8,500 SAIT A46N-BF

GREENBACK MAXIDISC ZIRCONIA FLAP DISC EASY TRIM HAS NEVER BEEN EASIER! TRIMMABLE, BETTER PRICE, BETTER FLAP BACKING. METAL IRON STEEL FERROUS METALS HARD MATERIALS 6 reasons to buy Pearl Greenback Maxidisc : 1. Easy Trim backing saves time and money. Greenback s nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down exposing more flap length. This translates into fewer wheel changes, saving you down time thus reducing your product usage and labor cost. 2. Non-warping nylon back. Greenback s reinforced with fiberglass, gives the Greenback flap disc more strength and durability than the competitions plastic back even under the most severe conditions. 3. Combination polyester/cotton flap. The best zirconia grains, on a special combination polyester/cotton flap, hold the grain more securely and resist clogging. 4. Less vibrations. Greenbacks polyester/cotton flaps cushion the backing thus reducing vibration and noise. 5. Easy grit identification. Never wonder what grit you are putting on your grinder. Even after extensive use you can still identify the grit. 6. Runs cooler. Greenback s exclusive outer coating, over the best premium Zirconia grains available, make the Pearl Abrasive Greenback Maxidisc flap disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material. MAX4540ZG 4-1/2 x 7/8 Z40 13,300 MAX4560ZG 4-1/2 x 7/8 Z60 13,300 MAX4580ZG 4-1/2 x 7/8 Z80 13,300 MAX5040ZG 5 x 7/8 Z40 12,000 MAX5060ZG 5 x 7/8 Z60 12,000 MAX5080ZG 5 x 7/8 Z80 12,000 Take the Greenback Challenge: COMPARE AND SAVE!

RADIAL FLAP DISCS the pearl maxidisc SYSTEM Ideal for the following typical applications and industries: Stainless steel fabrication Polishing Grinding Stock removal Dairy equipment repair Weld blending Liquid storage tanks Cleaning Finishing Truck and autobody repair Edge chamfering Burr removal Sanding Paint removal Construction equipment repair EXTRA LONG LIFE 60% more usable flap area than standard disc FatMax 60% MORE Standard These larger flap areas make the disc last longer, run cooler and avoid glazing and clogging. EXTENDED LIFE GRINDING, BLENDING & SANDING T-29 MAX4540ZJ9 4-1/2 x 7/8 Z40 13,300 MAX4560ZJ9 4-1/2 x 7/8 Z60 13,300 MAX4580ZJ9 4-1/2 x 7/8 Z80 13,300 AGGRESSIVE STOCK REMOVAL Sharp zirconia grains aggressively removes stock HEAVY STOCK REMOVAL AGGRESSIVE GRINDING Designed with extremely tough and sharp zirconia grains and grinding agents that lubricate and reduce heat, the fracturing characteristics of the grains continually expose sharp cutting edges. MAX4536Z 4-1/2 x 7/8 Z36 13,300 MAX4536ZH 4-1/2 x 5/8-11 Z36 13,300 MAX4540Z 4-1/2 x 7/8 Z40 13,300 MAX454ZH 4-1/2 x 5/8-11 Z40 13,300 GENERAL PURPOSE Multiple applications general purpose disc Specially developed as a general purpose disc that is both versatile and at the same time a great value. Made with sharp and tough zirconia grains for grinding, sanding and blending applications. GRINDING BLENDING SANDING MX4040ZT 4 x 5/8 Z40 13,700 MX4060ZT 4 x 5/8 Z60 13,700 MX4080ZT 4 x 5/8 Z80 13,700 MX4540ZT 4-1/2 x 7/8 Z40 13,300 MX454ZTH 4-1/2 x 5/8-11 Z40 13,300 MX4560ZT 4-1/2 x 7/8 Z60 13,300 MX456ZTH 4-1/2 x 5/8-11 Z60 13,300 MX4580ZT 4-1/2 x 7/8 Z80 13,300 MX458ZTH 4-1/2 x 5/8-11 Z80 13,300 MX5040ZT 5 x 7/8 Z40 12,000 MX540ZTH 5 x 5/8-11 Z40 12,000 MX5060ZT 5 x 7/8 Z60 12,000 MX560ZTH 5 x 5/8-11 Z60 12,000 MX5080ZT 5 x 7/8 Z80 12,000 MX580ZTH 5 x 5/8-11 Z80 12,000 MX7040ZT 7 x 7/8 Z40 8,500 MX740ZTH 7 x 5/8-11 Z40 8,500 MX7060ZT 7 x 7/8 Z60 8,500 MX760ZTH 7 x 5/8-11 Z60 8,500 MX7080ZT 7 x 7/8 Z80 8,500 MX780ZTH 7 x 5/8-11 Z80 8,500 T-29 MX454Z9T 4-1/2 x 7/8 Z40 13,300 MX454Z9TH 4-1/2 x 5/8-11 Z40 13,300 MX456Z9T 4-1/2 x 7/8 Z60 13,300 MX456Z9TH 4-1/2 x 5/8-11 Z60 13,300 MX458Z9T 4-1/2 x 7/8 Z80 13,300 MX458Z9TH 4-1/2 x 5/8-11 Z80 13,300

CHOOSE THE MAXIDISC THAT IS RIGHT FOR YOU! HIGH PERFORMANCE Trimmable HIGH PERFORMANCE MAXIMUM VERSATILITY GRINDING, BLENDING & SANDING STAINLESS STEEL ALUMINUM Easy Trim back exposes more flap length reducing costly disc changes. Combination polyester/cotton flap Special polyester/cotton flaps and a special bonding resin holds the grain to resist clogging and improve grinding efficiency. Stainless Steel Zirconia Grain + Active Grinding Agent A special premium zirconia grain and active grinding agent was specifically developed for stainless steel to avoid overheating, glazing and discoloration of the work. It has exceptional stock removal properties. Silicon Carbide Grain A blending of exceptionally sharp silicon carbide grains coupled with a unique resin bond makes this wheel work extremely well on aluminum and non-ferrous metals. MAX4540ZG 4-1/2 x 7/8 Z40 13,300 MAX4560ZG 4-1/2 x 7/8 Z60 13,300 MAX4580ZG 4-1/2 x 7/8 Z80 13,300 MAX5040ZG 5 x 7/8 Z40 12,000 MAX5060ZG 5 x 7/8 Z60 12,000 MAX5080ZG 5 x 7/8 Z80 12,000 GRINDING, BLENDING & SANDING MAX4540ZS 4-1/2 x 7/8 Z40 13,300 MAX4540ZSH 4-1/2 x 5/8-11 Z40 13,300 MAX4560ZS 4-1/2 x 7/8 Z60 13,300 MAX4560ZSH 4-1/2 x 5/8-11 Z60 13,300 MAX4580ZS 4-1/2 x 7/8 Z80 13,300 MAX4580ZSH 4-1/2 x 5/8-11 Z80 13,300 ALUMINUM AND NON-FERROUS METALS LIGHT GRINDING, BLENDING, SANDING, POLISHING & FINISHING MAX4080C 4 x 5/8 C80 13,700 MAX4120C 4 x 5/8 C120 13,700 MAX4240C 4 x 5/8 C240 13,700 MAX4320C 4 x 5/8 C320 13,700 MAX4400C 4 x 5/8 C400 13,700 MAX4600C 4 x 5/8 C600 13,700 MAX4580C 4-1/2 x 7/8 C80 13,300 MX4580CH 4-1/2 x 5/8-11 C80 13,300 MAX4512C 4-1/2 x 7/8 C120 13,300 MX4512CH 4-1/2 x 5/8-11 C120 13,300 MAX4524C 4-1/2 x 7/8 C240 13,300 MX4524CH 4-1/2 x 5/8-11 C240 13,300 MAX4532C 4-1/2 x 7/8 C320 13,300 MX4532CH 4-1/2 x 5/8-11 C320 13,300 MAX4540C 4-1/2 x 7/8 C400 13,300 MX4540CH 4-1/2 x 5/8-11 C400 13,300 MAX4560C 4-1/2 x 7/8 C600 13,300 MX4560CH 4-1/2 x 5/8-11 C600 13,300 MAX7080C 7 x 7/8 C80 8,500 MX7080CH 7 x 5/8-11 C80 8,500 MAX7120C 7 x 7/8 C120 8,500 MX7120CH 7 x 5/8-11 C120 8,500 MAX7240C 7 x 7/8 C240 8,500 MX7240CH 7 x 5/8-11 C240 8,500 MAX7320C 7 x 7/8 C320 8,500 MX7320CH 7 x 5/8-11 C320 8,500 MAX7400C 7 x 7/8 C400 8,500 MX7400CH 7 x 5/8-11 C400 8,500 MAX7600C 7 x 7/8 C600 8,500 MX7600CH 7 x 5/8-11 C600 8,500

FLEXIBLE DEPRESSED CENTER GRINDING WHEELS GRINDING, SHAPING, FINISHING OR SANDING... ONE WHEEL DOES IT ALL. Pearl Abrasive flexible grinding wheels combine the benefits of depressed center grinding wheels, resin fiber discs (sanding discs) and flap discs into one revolutionary product. + + = MAXIMUM VERSATILITY GRINDING WHEEL FIBER DISC FLAP DISC 5 reasons the Pearl flexible grinding wheels give a better finish. 1. Flexible wheels are extremely versatile. Pearl flexible grinding wheels combine the benefits of traditional fiber discs, grinding wheels and flap discs to produce a product that is truly versatile and capable of meeting all your grinding, shaping, finishing or sanding needs. 2. Increase grinding surface area. Because of their flexibility, there is more wheel surface on the material being ground, making for faster grinding efficiency. 3. Superior surface finish. When a smooth finish is important and contours and corners have to be blended, flexible wheels get the job done. 4. Less vibration. A flexible grinding wheel absorbs vibration resulting in less fatigue and downtime. 5. Exclusive non-woven reinforcement. Pearl Abrasive flexible wheels are double-reinforced with a top layer of non-woven fabric and an internal layer of reinforcing cloth. This adds the element of safety and stability to the wheel. FLEXIBILITY INCREASES GRINDING SURFACE NON-WOVEN FABRIC GRAIN REINFORCED CLOTH GRAIN

CHOOSE THE FLEXIBLE GRINDING WHEEL THAT IS RIGHT FOR YOU! HIGH PERFORMANCE FLEXTRON SRT SERIES FERROUS METALS IRON STEEL HIGH TENSILE ALLOYS FLEX4036 4 x 1/8 x 5/8 SRT 36 13,700 FLEX4046 4 x 1/8 x 5/8 SRT 46 13,700 FLEX4060 4 x 1/8 x 5/8 SRT 60 13,700 FLEX4080 4 x 1/8 x 5/8 SRT 80 13,700 FLEX4120 4 x 1/8 x 5/8 SRT 120 13,700 FLEX4536 4-1/2 x 1/8 x 7/8 SRT 36 13,300 FLEX453H 4-1/2 x 1/8 x 5/8-11 SRT 36 13,300 FLEX4546 4-1/2 x 1/8 x 7/8 SRT 46 13,300 FLEX454H 4-1/2 x 1/8 x 5/8-11 SRT 46 13,300 FLEX4560 4-1/2 x 1/8 x 7/8 SRT 60 13,300 FLEX456H 4-1/2 x 1/8 x 5/8-11 SRT 60 13,300 FLEX4580 4-1/2 x 1/8 x 7/8 SRT 80 13,300 FLEX458H 4-1/2 x 1/8 x 5/8-11 SRT 80 13,300 FLEX4512 4-1/2 x 1/8 x 7/8 SRT 120 13,300 FLEX451H 4-1/2 x 1/8 x 5/8-11 SRT 120 13,300 FLEX7036 7 x 1/8 x 7/8 SRT 36 8,500 FLEX736H 7 x 1/8 x 5/8-11 SRT 36 8,500 FLEX7046 7 x 1/8 x 7/8 SRT 46 8,500 FLEX746H 7 x 1/8 x 5/8-11 SRT 46 8,500 FLEX7060 7 x 1/8 x 7/8 SRT 60 8,500 FLEX760H 7 x 1/8 x 5/8-11 SRT 60 8,500 FLEX7080 7 x 1/8 x 7/8 SRT 80 8,500 FLEX780H 7 x 1/8 x 5/8-11 SRT 80 8,500 FLEX7120 7 x 1/8 x 7/8 SRT 120 8,500 FLEX712H 7 x 1/8 x 5/8-11 SRT 120 8,500 GENERAL PURPOSE ALUMINUM OXIDE FERROUS METALS IRON STEEL FAC4036 4 x 1/8 x 5/8 AC36 13,700 FAC4046 4 x 1/8 x 5/8 AC46 13,700 FAC4060 4 x 1/8 x 5/8 AC60 13,700 FAC4080 4 x 1/8 x 5/8 AC80 13,700 FAC4120 4 x 1/8 x 5/8 AC120 13,700 FAC4536 4-1/2 x 1/8 x 7/8 AC36 13,300 FAC4536H 4-1/2 x 1/8 x 5/8-11 AC36 13,300 FAC4546 4-1/2 x 1/8 x 7/8 AC46 13,300 FAC4546H 4-1/2 x 1/8 x 5/8-11 AC46 13,300 FAC4560 4-1/2 x 1/8 x 7/8 AC60 13,300 FAC4560H 4-1/2 x 1/8 x 5/8-11 AC60 13,300 FAC4580 4-1/2 x 1/8 x 7/8 AC80 13,300 FAC4580H 4-1/2 x 1/8 x 5/8-11 AC80 13,300 FAC7024 7 x 1/8 x 7/8 AC24 8,500 FAC7024H 7 x 1/8 x 5/8-11 AC24 8,500 FAC7036 7 x 1/8 x 7/8 AC36 8,500 FAC7036H 7 x 1/8 x 5/8-11 AC36 8,500 FAC7046 7 x 1/8 x 7/8 AC46 8,500 FAC7046H 7 x 1/8 x 5/8-11 AC46 8,500 FAC7060 7 x 1/8 x 7/8 AC60 8,500 FAC7060H 7 x 1/8 x 5/8-11 AC60 8,500 FAC7080 7 x 1/8 x 7/8 AC80 8,500 FAC7080H 7 x 1/8 x 5/8-11 AC80 8,500 FAC7120 7 x 1/8 x 7/8 AC120 8,500 FAC7120H 7 x 1/8 x 5/8-11 AC120 8,500 FAC9036 9 x 1/8 x 7/8 AC36 6,500 FAC9036H 9 x 1/8 x 5/8-11 AC36 6,500 FAC9046 9 x 1/8 x 7/8 AC46 6,500 FAC9046H 9 x 1/8 x 5/8-11 AC46 6,500 FAC9060 9 x 1/8 x 7/8 AC60 6,500 FAC9060H 9 x 1/8 x 5/8-11 AC60 6,500 STAINLESS STEEL HIGH TENSILE ALLOYS FWA7024 7 x 1/8 x 7/8 WA24 8,500 FWA7024H 7 x 1/8 x 5/8-11 WA24 8,500 FWA7036 7 x 1/8 x 7/8 WA36 8,500 FWA7036H 7 x 1/8 x 5/8-11 WA36 8,500 FWA7046 7 x 1/8 x 7/8 WA46 8,500 FWA7046H 7 x 1/8 x 5/8-11 WA46 8,500 ALUMINUM ALUMINUM CAST IRON NON-FERROUS METALS FCC7036 7 x 1/8 x 7/8 CC36 8,500 FCC7036H 7 x 1/8 x 5/8-11 CC36 8,500 FCC7046 7 x 1/8 x 7/8 CC46 8,500 FCC7046H 7 x 1/8 x 5/8-11 CC46 8,500

SURFACE PREPARATION WHEELS Quick & clean surface preparation ALUMINUM CHROME PLATE GLASS BRASS PLASTIC COPPER TITANIUM BRONZE NICKEL CERAMICS STEEL IRON Pearl Abrasive surface preparation wheels are designed and engineered of a dense, non-woven synthetic fiber fused with an abrasive grain that quickly finishes the surface. Manufactured and constructed to clean, blend, condition, debur, finish and more. Reasons to use Pearl surface preparation wheels: 1. The operator is provided with a controlled, sustained finish. 2. Surface preparation wheels prevent undercutting and gouging when grinding. 3. Wheels run cooler than coated or bonded abrasives, which lessens the chance of warping or discoloring of the workpiece. 4. Reduces the number of grinding steps to obtain the required finish. 5. Non-warping, rigid nylon backing allows the wheel to be used on standard angle grinders. Ideal for the following typical applications and industries: Surface preparation before coating and painting. Remove blemishes after welding stainless steel. Remove rust, paint and oxidation. Excellent for use in automotive body and paint repair. Remove weld marks and weld splatter. Excellent for cleaning equipment. Remove coating and gasket residues. Use in marine construction. Excellent for blending and finishing engine propellers. Use on food processing equipment. Provides a decorative finish on stainless steel. Use in steel and stainless steel fabrication. ALUMINUM OXIDE MAROON FERROUS METALS IRON SHEET METAL STEEL NICKEL NW4MF 4 x 5/8 Fine 13,700 NW45MF 4-1/2 x 7/8 Fine 13,300 NW45MFH 4-1/2 x 5/8-11 Fine 13,300 NW7MF 7 x 7/8 Fine 8,500 NW7MFH 7 x 5/8-11 Fine 8,500 SILICON CARBIDE GREY NON-FERROUS METALS BRONZE GLASS ALUMINUM PLASTIC BRASS COPPER NW4GSF 4 x 5/8 Super Fine 13,700 NW45GSF 4-1/2 x 7/8 Super Fine 13,300 NW45GSFH 4-1/2 x 5/8-11 Super Fine 13,300 NW7GSF 7 x 7/8 Super Fine 8,500 NW7GSFH 7 x 5/8-11 Super Fine 8,500

SLIMCUT THIN CUT-OFF WHEELS (T-1 & ) SLIMCUT THIN CUT-OFF WHEELS OUTPERFORM THE COMPETITION! FERROUS METALS NON-FERROUS METALS BRASS SHEET METAL BRONZE STEEL COPPER ALUMINUM IRON Pearl Abrasive has an expanded line of thin cut-off wheels that meet a variety of performance standards and price demands. 1. Fast cutting. 2. Burr-free. 3. Minimal stock removal. 4. Externally reinforced for added safety. 5. Available in Type-1 and Type-27. Ideal for the following typical applications and industries: Angle iron Pipe Electronics Thin wall tubing Automotive Food processing Rebar cutting Aerospace Farming Extruded bar stock Foundries Ship building Cut made with Slimcut cut-off wheel Cut made with standard cut-off wheel Light guage metals Aluminum siding and gutter work Stainless steel tank repair Sheet metal and welding shops Choose the Slimcut cut-off wheel that meets your pricing and performance needs. THE ULTIMATE BLEND OF PERFORMANCE AND PRICE. PRO-V SLIMCUT PEARL SLIMCUT REDLINE SLIMCUT LONG LIFE AND COOL AGGRESSIVE CUTTING. PROPRIETARY HIGH PERFORMANCE GRAIN FOR EXCEPTIONAL CUTTING SPEED AND LIFE. T-1 PVCW4532A 4-1/2 x.040 x 7/8 A46 13,500 PVCW0532A 5 x.040 x 7/8 A46 12,200 PVCW0632A 6 x.040 x 7/8 A46 10,200 PVDCW45A 4-1/2 x.045 x 7/8 A46 13,500 PVDCW05A 5 x.045 x 7/8 A46 12,200 PVDCW06A 6 x.045 x 7/8 A46 10,200 T-1 CW4532A 4-1/2 x.040 x 7/8 A46 13,500 CW0532A 5 x.040 x 7/8 A46 12,200 CW0532B 5 x.040 x 5/8 A46 12,200 CW0632A 6 x.040 x 7/8 A46 10,200 CW0632B 6 x.040 x 5/8 A46 10,200 CW0632C 6 x.040 x 1/2 A46 10,200 CW0632D 6 x.040 x 3/8 A46 10,200 CW0732A 7 x.040 x 7/8 A46 8,500 DCW04A 4 x.045 x 5/8 A46 13,700 DCW45A 4-1/2 x.045 x 7/8 A46 13,500 DCW05A 5 x.045 x 7/8 A46 12,200 DCW06A 6 x.045 x 7/8 A46 10,200 DCW07A 7 x.045 x 7/8 A46 8,500 T-1 CWRED4532A 4-1/2 x.040 x 7/8 A46 13,500 CWRED0532A 5 x.040 x 7/8 A46 12,200 CWRED0632A 6 x.040 x 7/8 A46 10,200 DCWRED45A 4-1/2 x.045 x 7/8 A46 13,500 DCWRED05A 5 x.045 x 7/8 A46 12,200 DCWRED06A 6 x.045 x 7/8 A46 10,200

LOS ANGELES, CALIFORNIA USA 6210 South Garfield Ave.,Commerce California 90040-3613 TEL: 562-927-5561 FAX 562-928-3857 Toll Free: 800-969-5561 Fax: 866-515-7569 GEORGIA, USA 4761 Hugh Howell Rd., Suite N Tucker, GA 30084-5024 ONTARIO, CANADA 375 Pido Road, Peterborough, Ontario Canada, K9J-6X7 TEL: 705-741-6447 FAX 705-741-6460 Toll Free: 800-387-0008 Fax: 800-331-1961 www.pearlabrasive.com Pearl Abrasive Co. 0607 #SPABRFLYR07