Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output signals -wire: 4... 0 ma others on request Special characteristics turn-down :0 hygienic version flush welded diaphragm several process connections (G cone, Clamp, dairy pipe, etc.) integrated display and operating module Optional versions S-version Ex ia = intrinsically safe for gases and dusts HART -communication cooling element for media temperatures up to 00 C The precise pressure transmitter x act i has been especially designed for the food industry, pharmacy and biotechnology and measures vacuum, gauge and absolute pressure of gases, steam and fluids up to 40 bar. Several process connections e.g. thread or hygienic versions like Varivent, dairy pipe and Clamp with a flush welded diaphragm are available, which can be combined with a cooling element for media temperatures up to 00 C. The robust stainless steel globe housing has a high ingress protection P 67 and all characteristics for a residue-free and antibacterial cleaning. Preferred areas of use are Food ndustry Pharmacy Material and test certificates material mill test report according to DN EN 004-.. specific test report according to DN EN 004-.. 74-06 BD SENSORS GmbH BD-Sensors-Straße Tel: +49 (0) 9 5 / 98-0 www.bdsensors.com D - 9599 Thierstein Fax: +49 (0) 9 5 / 98 - info@bdsensors.de
Pressure ranges Nominal pressure gauge / abs. 0.4 4 0 0 40 Overpressure 5 0 0 40 80 05 Burst pressure 7.5 5 5 50 0 0 higher pressure ranges on request; on demand we adjust the devices within the turn-down-possibility by software on the required pressure ranges absolute pressure possible from bar Vacuum ranges Nominal pressure gauge -0.4 0.4 - - - 4-0 Overpressure 5 0 0 40 Burst pressure 7.5 5 5 50 Output signal / Supply Standard -wire: 4... 0 ma V S = 0 V DC Option S-version -wire: 4... 0 ma S-version -wire: 4... 0 ma with HART communication V S = 8 V DC V S = 8 V DC Current consumption max. 5 ma Performance Accuracy performance after turn-down (TD) - TD :5 ± 0. % FSO no change of accuracy - TD > :5 the accuracy is calculated as follows: 0. + 0.05 x (turn-down - 5) % FSO e.g. turn-down 9: 0. + 0.05 x (9-5) % FSO = 0.6 % FSO Permissible load R max = [(V S V S min ) / 0.0 A] load during HART communication: R min = 50 nfluence effects supply: 0.05 % FSO / 0 V permissible load: 0.05 % FSO / k Long term stability ± (0. x turn-down) % FSO / year at reference conditions Response time 00 msec without consideration of electronic damping measuring rate 0/sec Adjustability electronic damping: 0 00 sec offset: 0... 90 % FSO turn-down of span: max. :0 accuracy according to EC 60770 limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) / Permissible temperatures Tolerance band 4, 5 ± 0. % FSO x turn-down in compensated range -0 85 C Permissible temperatures 6 medium: -40... 5 C for filling fluid silicone oil -0... 5 C for filling fluid food compatible oil environment: -0... 70 C storage: -0... 80 C Permissible temperature medium filling fluid silicone oil overpressure: -40 00 C vacuum pressure: -40... 50 C for cooling element 00 C filling fluid food compatible oil overpressure: -0... 50 C vacuum pressure: -0... 50 C 4 an optional cooling element can influence thermal effects for offset and span depending on installation position and filling conditions 5 for flange-, Varivent-, DRD-version: tolerance band offset ±.6 % FSO / tolerance band span ± 0.6 % FSO 6 for vacuum ranges and absolute pressure the max. medium temperature is 70 C; max. temperature of the medium for nominal pressure gauge > 0 bar: 50 C for 60 minutes with a max. environmental temperature of 50 C (without cooling element). Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 5 g RMS (5... 000 Hz) according to DN EN 60068--6 Shock 00 g / msec according to DN EN 60068--7 Filling fluids Standard silicone oil Options food compatible oil according to CFR78.570 (Mobil SHC Cibus ; Category Code: H; NSF Registration No.: 4500) Halocarbon and others on request Materials Pressure port stainless steel.445 (6 L) Housing stainless steel.40 (04) Viewing glass laminated safety glass Seals (media wetted) none, not included in the scope of delivery Diaphragm standard: stainless steel.445 (6 L) options: Hastelloy C-76 (.489); tantalum (possible from bar on) on request Media wetted parts pressure port, diaphragm, seals (if existing) pressure and level
Explosion protection Approval AX-x act i Safety technical maximum values Permissible temperatures for environment Connecting cables (by factory) Miscellaneous Display BExU 05 ATEX 06 X zone 0: G Ex ia C T4 Ga zone 0: D Ex ia C T85 C Da U i = 8 V, i = 98 ma, P i = 680 mw, C i = 0 nf, L i = 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing in zone 0: -0... 60 C with p atm 0.8 bar up to. bar in zone 0: -40... 70 C capacitance: signal line/shield also signal line/signal line 60 pf/m inductance: signal line/shield also signal line/signal line µh/m LC display, visible range.5 x.5 mm; 5-digit 7-segment main display, digit height 8 mm, range of indication ±9999; 8-digit 4-segment additional display, digit height 5 mm; 5-segement bargraph; accuracy 0.% ± digit ngress protection P 67 nstallation position any (standard calibration in a vertical position with the pressure port connection down; differing installation position for P N bar have to be specified in the order) Weight min. 400 g (depending on mechanical connection) Operational life > 00 x 0 6 pressure cycles CE-conformity EMC Directive: 04/0/EU ATEX Directive 04/4/EU Wiring diagrams -wire-system (current) -wire-system (current) HART P supply + P supply + VS VS supply supply Pin configuration Electrical connections Supply + Supply Shield Electrical connections () Mx (4-pin), metal plug housing Mx (4-pin) Designs 7 side display 45 display 7 all designs in combination with G" cone in horizontal rotatable housing as standard; other mech. connections in rotatable housing on request www.bdsensors.com
Dimensions (in mm) G" cone Clamp (DN 676) Dairy pipe 8 (DN 85) 74-06 Varivent Flange (DN 50) DN40/50 PN 5 bar DRD 8 PN 5 bar 8 cup nut resp. mounting flange is included in the delivery (already pre-assembled) size /4" DN5 DN DN50 A 5 50.5 50.5 64 flush diaphragm E size DN5 DN50 DN80 D 5 65 00 E 0 89 89 k 85 5 60 b 8 0 0 n 4 4 8 d 4 8 8 PN 40 bar 40 bar 6 bar Cooling element HART is a registered trade mark of HART Communication Foundation; Hastelloy is a trademark of Haynes nternational nc.; Varivent is a trademark of GEA Tuchenhagen GmbH; Windows is a registered trade mark of Microsoft Corporation PN 4 8 0.5 6 6 6 size DN5 DN40 DN50 A 44 56 68.5 B 0 0 PN 0.5 40 temperature range 00 C 0.5 40 0.5 5 08 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. xact i_e_608 pressure Tel: and +49 level (0) 9 5 / 98-0 www.bdsensors.com Fax: +49 (0) 9 5 / 98 - info@bdsensors.de
Ordering code x act i x act i - - - - - - - - - - Pressure gauge absolute 5 5 nput 0... 0.4 4 0 0 0 0... 0 0 0... 0 0 0... 4 4 0 0 0... 0 0 0 0 0 0 0 0... 40 4 0 0-0.4 0.4 S 4 0 0 - S 0 -... V 0-4 V 4 0-0 V 0 9 9 9 9 consult Design side display 45 display K H K 4 Output 4 0 ma / -wire intrinsic safety 4 0 ma / -wire E intrinsic safety 4 0 ma / -wire with HART -communication 9 consult Accuracy 0. % FSO Electrical connection male plug Mx (4-pin), metal M 0 9 9 9 consult Mechanical connection G" cone Clamp DN 5 / " (DN 676) / A Clamp DN / /" (DN 676) / A Clamp DN 50 / " (DN 676) / A Clamp /4" (DN 676) / A dairy pipe DN 5 (DN 85) dairy pipe DN 40 (DN 85) dairy pipe DN 50 (DN 85) Varivent DN 40/50 / A flange DN 5 / PN 40 (DN 50) flange DN 50 / PN 40 (DN 50) flange DN 80 / PN 6 (DN 50) DRD Ø 65 mm K C 6 C 6 C 6 C 6 9 M 7 M 7 5 M 7 6 P 4 F 0 F F 4 D R D Diaphragm stainless steel.445 (6L) Hastelloy C-76 (.489) tantalum H T consult Seals without 0 Filling Fluids silicone oil food grade oil (FDA) / A Halocarbon C consult 9 consult Special version standard with cooling element up to 00 C / A 0 0 0 0 0 if setting range shall be different from nominal range please specify in your order absolute pressure possible from bar cup nut resp. mounting flange is included in the delivery (already pre-assembled) tantalum diaphragm possible with nominal pressure ranges from bar HART is a registered trade mark of HART Communication Foundation; Hastelloy is a brand name of Haynes nternational nc. Varivent is a brand name of GEA Tuchenhagen GmbH 9.0.08 08 BD SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.