ECLIPSE EXTERNAL GEAR PUMP Flow: up to 33 gpm (125 lpm) Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 3 psi (2.7 bar) Temperature: from -4 to 45 F (-4 to 232 C) Viscosity: up to 1, cps NSF/ANSI 61* *Non-metallic Only ENGINEERED PRODUCTS
ECLIPSE PULSAFEEDER EXPERTISE For over 7 years, Pulsafeeder, Inc. continues to be a proven leader in fluid handling technology and innovation in chemical dosing. With extensive experience in providing fluid handling solutions, our pumps are designed to handle even the toughest applications. Known for rugged construction and dependable performance, our products are manufactured with excellence and the highest quality standards. The Eclipse represents a dramatic advance in pump technology. Combining proven design principles with patented features, our pumps are safe, simple, and reliable. Structurally rugged with corrosionresistant materials, Eclipse is an ideal fit for many corrosive liquids. From acids to bases, we cover the entire ph scale. The innovative technology behind Eclipse supports its ability to handle the most corrosive chemicals with a simple-to-service, front pull-out design. Eclipse is available with wetted components in completely non-metallic construction, 316SS, and Alloy C. These material offerings ensure corrosion resistance over a wide range of chemicals and process conditions. These pumps are magnetically driven to eliminate mechanical seal wear and leaks associated with rotating seals. The patented bearing design promotes constant lubrication. PRODUCT SPECIFICATIONS Markets Chemical Processing Oil & Gas Petrochemical Wastewater Treatment Water Treatment - Power Water Treatment - Municipal Typical Applications Sodium Hypochlorite Hydrogen Peroxide Sulfuric Acid Solvents Caustic Polymers Dyes & Inks Catalyst Cleaning Agents Flocculants Adhesives & Resins Acids COMPONENTS NEMA & IEC Motor Adaptor FNPT, BSPT, ANSI or DIN Flange Connections Heavy Duty Bearings Innovative One-piece Gear / Shaft Fully Encapsulated Driven Magnet Tolerance O-ring Patented Replaceable Housing Liner Containment Can Resists Heat Damage Due to Eddy Currents and Eliminates Leak Paths Modular Magnet Hub (Non-metallic Models Only) 2
FEATURES DESIGNED FOR SIMPLICITY Fewest number of components of any external gear pump on the market Simplified ordering and inventory with fewer parts Self-aligning parts and piloted fits ensure proper assembly every time RENEWABLE PERFORMANCE Patented housing liner protects the housing from wear Easy maintenance KOPkit (Keep On Pumping kit) saves time and money Regain performance flow with a KOPkit HEAVY DUTY BEARINGS & TOLERANCE O-RING Bearings have large wear areas Patented bearings are made from self-lubricating materials Tolerance O-ring maintains proper internal operating clearances MAGNETICALLY DRIVEN SEALLESS DESIGN Eliminates costly seal flush systems required for double mechanical seals Patented drive shaft spline design optimizes magnet alignment on shaft Fully encapsulated driven magnets offer maximum corrosion resistance Sealless design ensures zero leakage UNIVERSAL FLANGES Standard housings mate to both ANSI and DIN flange connections PTFE or Viton inserts act as a gasket and can be reused or replaced to ensure a proper seal (Non-metallic only) UNIVERSAL MOTOR ADAPTOR Standard adaptors easily mate to multiple NEMA and IEC motors Wide range of motor adaptors allow for easy installation in retrofit applications pulsa.com 3
E2 MODEL PRODUCT SPECIFICATIONS Flow: up to.45 gpm (1.7 lpm) NSF/ANSI 61* *Non-metallic Only Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 2 psi (13.8 bar) Non-metallic up to 3 psi (2.7 bar) Metallic Temperature: up to 2 F (93 C) Non-metallic up to 45 F (232 C) Metallic Viscosity: up to 1, cps DIMENSIONAL DRAWINGS Non-metallic Metallic 1.38 34.9 7.25 184.2 3.63 92.1 2.75 69.9 6.56 166.6 5.55 141. 2. 5.8 PORT 6.5 165.1 2. 5.8 2.75 69.9.25 6.4 1/4 NPT OR BSPT (BOTH SIDES) MOTOR Note: For additional detailed dimensional drawings, refer to the model tech sheets on www.pulsa.com. MATERIALS OF CONSTRUCTION Housing PVDF 316SS Alloy C Magnet Neodymium encapsulated in virgin PTFE Samarium Cobalt Samarium Cobalt Liner Carbon reinforced PTFE Carbon reinforced PTFE Carbon reinforced PTFE Bearings Carbon Graphite or Graphite impregnated O-rings Viton, EPDM, and Kalrez 479 PTFE and Kalrez PTFE and Kalrez 4
E5 MODEL PRODUCT SPECIFICATIONS Flow: up to 1.6 gpm (6.1 lpm) NSF/ANSI 61* *Non-metallic Only Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 2 psi (13.8 bar) Non-metallic up to 3 psi (2.7 bar) Metallic Temperature: up to 2 F (93 C) Non-metallic up to 45 F (232 C) Metallic Viscosity: up to 1, cps DIMENSIONAL DRAWINGS Non-metallic Metallic 6.93 176.1 1. 253.9 5.59 142. 1/8 NPT VENT 5. 126.9.47 11.9 2X 3.75 3.81 95.3 96.9 5.81 147.6 FLANGE OPTION 1/2" - 15# ANSI / DIN 1/15 PN16 BOTH SIDES 1/8 NPT DRAIN 1/2 NPT OR BSPT (BOTH SIDES) PORT.47 11.9 Note: For additional detailed dimensional drawings, refer to the model tech sheets on www.pulsa.com. MATERIALS OF CONSTRUCTION 2.88 73. FNPT / BSPT MOTOR Housing PVDF 316SS Alloy C Magnet Neodymium encapsulated in virgin PTFE Neodymium or Samarium Cobalt Neodymium or Samarium Cobalt Liner Carbon reinforced PTFE Carbon reinforced PTFE Carbon reinforced PTFE Bearings Carbon Graphite or Graphite impregnated O-rings Viton, EPDM, and Kalrez 479 PTFE and Kalrez PTFE and Kalrez pulsa.com 5
E12 MODEL PRODUCT SPECIFICATIONS Flow: up to 3.5 gpm (13.2 lpm) NSF/ANSI 61* *Non-metallic Only Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 2 psi (13.8 bar) Non-metallic up to 3 psi (2.7 bar) Metallic Temperature: up to 2 F (93 C) Non-metallic up to 45 F (232 C) Metallic Viscosity: up to 1, cps DIMENSIONAL DRAWINGS Non-metallic Metallic 7.25 184.2 1. 253.9 5.59 142.1 1/8 NPT VENT 5. 127. 3.81 96.9 5.81 147.6 2X 3.75 95.3.47 11.9 1/8 NPT DRAIN 1/2 NPT (BOTH SIDES) FLANGE OPTION 1/2"-15# ANSI / DIN 1/15 PN16 BOTH SIDES PORT.47 11.9 Note: For additional detailed dimensional drawings, refer to the model tech sheets on www.pulsa.com. MOTOR MATERIALS OF CONSTRUCTION 2.88 73. FNPT / BSPT Housing PVDF 316SS Alloy C Magnet Neodymium encapsulated in virgin PTFE Neodymium or Samarium Cobalt Neodymium or Samarium Cobalt Liner Carbon reinforced PTFE Carbon reinforced PTFE Carbon reinforced PTFE Bearings Carbon Graphite or Graphite impregnated O-rings Viton, EPDM, and Kalrez 479 PTFE and Kalrez PTFE and Kalrez 6
E25 MODEL PRODUCT SPECIFICATIONS Flow: up to 7.4 gpm (28 lpm) NSF/ANSI 61* *Non-metallic Only Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 2 psi (13.8 bar) Non-metallic up to 3 psi (2.7 bar) Metallic Temperature: up to 2 F (93 C) Non-metallic up to 45 F (232 C) Metallic Viscosity: up to 1, cps DIMENSIONAL DRAWINGS Non-metallic Metallic 8.88 225.6 1. 253.9 6.48 164.5 1/8 NPT DRAIN 5. 127..63 15.9 4.88 123.8 6.75 171.5 2X 4.62 117.3 1/8NPT DRAIN 3/4 NPT OR BSPT (BOTH SIDES) FLANGE OPTION 3/4" - 15# ANSI / DIN 2 PN16 BOTH SIDES PORT.63 15.9 Note: For additional detailed dimensional drawings, refer to the model tech sheets on www.pulsa.com. MOTOR MATERIALS OF CONSTRUCTION FNPT / BSPT Housing PVDF 316SS Alloy C Magnet Neodymium encapsulated in virgin PTFE Neodymium or Samarium Cobalt Neodymium or Samarium Cobalt Liner Carbon reinforced PTFE Carbon reinforced PTFE Carbon reinforced PTFE Bearings Carbon Graphite or Graphite impregnated O-rings Viton, EPDM, and Kalrez 479 PTFE and Kalrez PTFE and Kalrez pulsa.com 7
E75 & E125 MODEL PRODUCT SPECIFICATIONS Flow: up to 33 gpm (125 lpm) NSF/ANSI 61* *Non-metallic Only Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 2 psi (13.8 bar) Non-metallic up to 3 psi (2.7 bar) Metallic Temperature: up to 2 F (93 C) Non-metallic up to 45 F (232 C) Metallic Viscosity: up to 1, cps 1. DIMENSIONAL DRAWINGS 1 1/2" - 15# ANSI / DIN 32/4 PN16 BOTH SIDES 5. 127. 254. Non-metallic Metallic.94 23.8 7.19 182.6 2.41 MAX 61.2 1.125 28.58.25 X 2. LG. KEY 19.85 54.1 23.61 599.7 1/8 NPT VENT 6.25 158.8 1-1/2 NPT BOTH SIDES 1 1/2" - 15# ANSI / DIN 32/4 PN16 BOTH SIDES 7.19 182.6 6.88 174.6.94 23.811.47 291.5 5. 127. 2.5 1 1/2" - 15# ANSI 63.5 / DIN 32/4 PN16 BOTH SIDES.94 23.8.94 23.8 1/8NPT DRAIN 1. 254. FLANGE OPTION 5. 127. 5. 127. 1. 254. PORT 7.19 182.6 MOTOR 7.19 182.6 2.19 55.6 6X.44 MOUNTING HOLES 2.41 MAX 61.2 19.85 54.1 2.75 23.61 69.9 599.7 2.41 MAX 5.5 61.2 139.7 5.5 139.7 1/8 NPT VENT 1/8 NPT VENT FLANGE OPTION 23.61 3.75 FLANGE OPTION 599.7 95.3 1-1/2 NPT BOTH SIDES 1-1/2 NPT BOTH SIDES 7.5 4.87 19.85 ADAPTOR DRAIN 5. 19.5 123.7 54.1 2.5 127. 2.5 63.5 8.75 63.5 222.3 PORT.94 FNPT.94 / BSPT 6.88 23.8 6.88 23.8 174.6 174.6 5. 127. PORT 1.125 28.58.25 X 2. LG. KEY 1.125 28.58.25 X 2. LG. KEY 6.25 158.8 7.19 182.6 11.47 291.5 6.25 7.19 1/8NPT 158.8 DRAIN 182.6 11.47 291.5 MOTOR 1/8NPT DRAIN MOTOR 2.19 55.6 6X.44 MOUNTING HOLES Note: For additional detailed dimensional drawings, refer to the model tech sheets on www.pulsa.com. 2.75 2.19 69.9 55.6 6X.44 MOUNTING HOLES 5.5 139.7 5.5 139.7 4.87 123.7 2.75 69.9 ADAPTOR DRAIN 4.87 123.7 5.5 139.7 5.5 139.7 ADAPTOR DRAIN 3.75 95.3 7.5 19.5 8.75 222.3 FNPT / BSPT 3.75 95.3 7.5 19.5 8.75 222.3 FNPT / BSPT MATERIALS OF CONSTRUCTION Housing PVDF 316SS Alloy C Magnet Neodymium encapsulated in virgin PTFE Samarium Cobalt Samarium Cobalt Liner Carbon reinforced PTFE Carbon reinforced PTFE Carbon reinforced PTFE Bearings Carbon Graphite or Graphite impregnated O-rings Viton, EPDM, and Kalrez 479 PTFE and Kalrez PTFE and Kalrez 8
FLOW CURVES E2 MODEL Fluid Viscosity: 1 cps, Specific Gravity 1. Motor 1/4 HP (.18 kw) Pump needs 56C Frame ft. psi bar m 37 16 11. 112 347 15 9 RPM 115 RPM 145 RPM 175 RPM 1.3 15 E5 MODEL Fluid Viscosity: 1 cps, Specific Gravity 1. ft. psi bar m 37 16 11. 112 115 RPM 145 RPM 347 15 175 RPM 1.3 15 9 RPM 323 14 9.7 99 323 14 9.7 99 277 12 8.3 84 277 12 8.3 84 231 1 6.9 7 231 1 6 RPM 6.9 7 PRESSURE 185 8 6 RPM 5.5 56 PRESSURE 185 8 1/3 HP.23kW 5.5 56 139 6 4.1 42 139 6 1/4 HP.19kW 4.1 42 92 4 2.8 28 92 4 2.8 28 3 RPM 46 2 1.4 14 46 2 1.4 14..5.1.15.2.25.3.35.4.45.5 gpm..2.4.6.8 1. 1.2 1.4 1.6 1.8 gpm..19.38.57.76.95 1.14 1.32 1.51 1.7 1.89 lpm..76 1.51 2.27 3.3 3.79 4.54 5.3 6.6 6.81 lpm FLOW FLOW 323 E12 MODEL Fluid Viscosity: 1 cps, Specific Gravity 1. ft. psi bar m 37 16 11. 112 347 15 6 RPM 9 RPM 115 RPM 145 RPM 1.HP 1.3 15.75kW 14 175 RPM.75HP.55kW 9.7 99 323 E25 MODEL Fluid Viscosity: 1 cps, Specific Gravity 1. ft. psi bar m 37 16 11. 112 347 15 6 RPM 9 RPM 145 RPM 175 RPM 1.3 15 115 RPM 3.HP 2.2kW 14 9.7 99 277 12 8.3 84 277 12 8.3 84 3 RPM PRESSURE 231 185 139 1 8 6.5HP.37kW 6.9 5.5 4.1 7 56 42 PRESSURE 231 185 139 1 8 6 3 RPM 2.HP 1.5kW 1.5HP 1.1kW 6.9 5.5 4.1 7 56 42 92 4 2.8 28 92 4 1.HP.75kW 2.8 28 46 2 1.4 14 46 2.5HP.37kW.75HP.55kW 1.4 14..5 1. 1.5 2. 2.5 3. 3.5 4. gpm. 1. 2. 3. 4. 5. 6. 7. 8. gpm. 1.89 3.79 5.68 7.57 9.46 11.36 13.25 15.14 lpm. 3.79 7.57 11.36 15.14 18.93 22.71 26.5 3.28 lpm FLOW FLOW 277 231 E75 MODEL Fluid Viscosity: 1 cps, Specific Gravity 1. ft. psi bar m 37 16 11. 112 347 15 6 RPM 9 RPM 115 RPM 145 RPM 1.3 15 7.5HP 5.5kW 323 14 9.7 99 12 1 175 RPM 5.HP 3.8kW 8.3 6.9 84 7 ft. psi bar m 37 16 11. 112 347 15 3 RPM 6 RPM 9 RPM 115 RPM 1.HP 1.3 15 7.5kW 323 14 9.7 99 7.5HP 145 RPM 5.5kW 277 231 12 1 E125 MODEL Fluid Viscosity: 1 cps, Specific Gravity 1. APPLICATION DETAILS REQUIRED 175 RPM 8.3 6.9 84 7 PRESSURE 185 139 8 6 3 RPM 4.HP 3.kW 3.HP 2.2kW 5.5 4.1 56 42 PRESSURE 185 139 8 Bearings Only 6 5.HP 3.8kW 4.HP 3.kW 5.5 4.1 56 42 92 46 4 2.8 28 2.HP 1.5kW 2 1.4 14 1.5HP 1.1kW 1.HP.75kW. 2. 4. 6. 8. 1. 12. 14. 16. 18. 2. 22. 24. gpm 92 46 4 2. 3.HP 2.2kW 2.8 28 2.HP 1.5kW 1.4 14 1.5HP 1.HP 1.1kW.75kW 4. 8. 12. 16. 2. 24. 28. 32. 36. 4. gpm. 7.57 15.14 22.71 3.28 37.85 45.42 53. 6.57 68.14 75.71 83.28 9.85 lpm. 15.14 3.28 45.42 6.57 75.71 9.84 16. 121.13 136.27 151.42 lpm FLOW FLOW pulsa.com 9
MODEL STRINGS NON-METALLIC PUMP CONFIGURATION STRING Pump Selection Available Model Code Description E _ - _ Positions 1, 2, 3 PUMP SIZE E 2 5 12 25 75 125 Size 2 - Max. Flow.45 gpm (1.7 lpm) 1/4-18 FNPT / 1/4-19 BSPT Size 5 - Max. Flow 1.6 gpm (6.1 lpm) 3/8-18 FNPT / 3/8-19 BSPT Size 12 - Max. Flow 3.5 gpm (13.2 lpm) 3/4-14 FNPT / 3/4-14 BSPT Size 25 - Max. Flow 7.4 gpm (28 lpm) Flanged 1-15# ANSI / DIN 2 / 25 Size 75 - Max. Flow 22 gpm (83.3 lpm) Flanged 1 1/2-15# ANSI / DIN 32 / 4 Size 125 - Max. Flow 33 gpm (125 lpm) Flanged 1 1/2-15# ANSI / DIN 32 / 4 Position 4 BASE MATERIAL 2,5 2,5 K M PVDF / FNPT PVDF / BSPT, Export Restrictions apply to the following sizes listed below: 12 12 25,75,125 K M N PVDF / FNPT PVDF / BSPT, PVDF, Flanged Position 5 BEARINGS 2,5,12,25,75,125 L B Carbon Position 6 O-RINGS 2,5,12,25,75,125 V E K Viton EPDM Kalrez Grade 479 Position 7 MOTOR MOUNTING ARRANGEMENTS 2,5,12,25,75 2,5,12,25,75,125 75,125 75,125 2,5,12 2,5,12 2,5,12,25,75 25,75 25,75,125 2,5,12,25,75,125 F O R W H J K L P Y NEMA 56C (C-face, rigid base, 5/8 shaft diameter, 4x 3/8-16 tapped holes on a 5-7/8 bolt circle) NEMA 143/5TC-182/4C (C-face, rigid base, 7/8 shaft diameter, 4x 3/8-16 tapped holes on a 5-7/8 bolt circle) NEMA 182TC-184TC (C-face, rigid base, 1-1/8 shaft diameter, 4x 1/2-13 tapped holes on a 7-1/4 bolt circle) NEMA 213TC-215TC (C-face, rigid base, 1-3/8 shaft diameter, 4x 1/2-13 tapped holes on a 7-1/4 bolt circle) IEC 63 B3/B14 (rigid base, C-face, 11 mm motor shaft diameter, 4x M5 tapped holes on a 75 mm bolt circle) IEC 71 B3/B14 (rigid base, C-face, 14 mm motor shaft diameter, 4x M6 tapped holes on a 85 mm bolt circle) IEC 8 B3/B14 (rigid base, C-face, 19 mm motor shaft diameter, 4x M6 tapped holes on a 1 mm bolt circle) IEC 9 B3/B14 (rigid base, C-face, 24 mm motor shaft diameter, 4x M8 tapped holes on a 115 mm bolt circle) IEC 1/112 B3/B14 (rigid base, C-face, 28 mm motor shaft diameter, 4x M8 tapped holes on a 13 mm bolt circle) NO MOTOR MOUNTING KIT (Pump includes Drive Magnet) Position 8 2,5,12,25,75,125 - Dash Position 9 OPTIONS 2,5,12,25,75,125 5,12,25,75,125 2,5,12,25,75,125 5,12,25,75,125 2,5,12,25,75,125 5,12,25,75,125 2,5,12,25,75,125 5,12,25,75,125 X A N B X- ATEX A- ATEX N- ATEX B- ATEX Standard (Complete Pump - No Options) Bearing Flush Port (1x 1/8 FNPT / BSPT Connection located in the center of the front cover) Pump Wet End Only (Only available in conjunction with 7th position option Y ) Combination Of 9th Position Options A AND N Standard Pump with ATEX Directive - CE Ex II 2G T6 II 2D T6 Bearing Flush with ATEX Directive - CE Ex II 2G T6 II 2D T6 Wet End Only with ATEX Directive - CE Ex II 2G T6 II 2D T6 Wet End Only and Bearing Flush with ATEX Directive - CE Ex II 2G T6 II 2D T6 Viton and Kalrez are registered trademarks of E.I. du Pont de Nemours and Company. 1
METALLIC PUMP CONFIGURATION STRING Pump Selection Available Model Code Description E _ - Positions 1, 2, 3 PUMP SIZE E 2 5 12 25 75 125 Size 2 - Max. Flow.45 gpm (1.7 lpm) 1/4 FNPT / 1/4 BSPT Size 5 - Max. Flow 1.6 gpm (6.1 lpm) 1/2 FNPT / 1/2 BSPT / Flanged.5-15# ANSI / DIN1 / 15 - PN16 Size 12 - Max. Flow 3.5 gpm (13.2 lpm) 1/2 FNPT / 1/2 BSPT / Flanged.5-15# ANSI / DIN1 / 15 - PN16 Size 25 - Max. Flow 7.4 gpm (28 lpm) 3/4 FNPT / 3/4 BSPT / Flanged.75-15# ANSI / DIN 2 - PN16 Size 75 - Max. Flow 22 gpm (83.3 lpm) 1-1/2 FNPT / 1-1/2 BSPT / Flanged 1 1/2-15# ANSI / DIN 32 / 4 - PN16 Size 125 - Max. Flow 33 gpm (125 lpm) 1-1/2 FNPT / 1-1/2 BSPT / Flanged 1 1/2-15# ANSI / DIN 32 / 4 - PN16 Position 4 BASE MATERIAL 2,5,12,25,75,125 2,5,12,25,75,125 2,5 2,5 5,12,25,75,125 5 A G C S U V 316SS / FNPT 316SS / BSPT ALLOY C / FNPT ALLOY C / BSPT 316SS / Flange ALLOY C / Flange Export Restrictions apply to the following sizes listed below: 12,25,75,125 12,25,75,125 12,25,75,125 C S V ALLOY C / FNPT ALLOY C / BSPT ALLOY C / Flange Position 5 BEARINGS 2,5,12,25,75,125 L B T Carbon ** bearings, must select Position 9 = B or P (Alumina ceramic shafts) Glass Filled PTFE 11 F (43.3 C) Position 6 O-RINGS 2,5,12,25,75,125 U K PTFE Kalrez Grade 479 (recommended for fluctuating temperature applications) Position 7 MOTOR FRAME MOUNTING 2,5,12,25 5,12,25 2 2,5,12 5,12,25 25 75,125 75,125 F O H J K L R U NEMA 56C (C-face, rigid base, 5/8 shaft diameter, 4x 3/8-16 tapped holes on a 5-7/8 bolt circle) NEMA 143/5TC (C-face, rigid base, 7/8 shaft diameter, 4x 3/8-16 tapped holes on a 5-7/8 bolt circle) IEC 63 B3/B14 (rigid base, C-face, 11 mm motor shaft diameter, 4x M5 tapped holes on a 75 mm bolt circle) IEC 71 B3/B14 (rigid base, C-face, 14 mm motor shaft diameter, 4x M6 tapped holes on a 85 mm bolt circle) IEC 8 B3/B14 (rigid base, C-face, 19 mm motor shaft diameter, 4x M6 tapped holes on a 1 mm bolt circle) IEC 9 B3/B14 (rigid base, C-face, 24 mm motor shaft diameter, 4x M8 tapped holes on a 115 mm bolt circle) NEMA - Pedestal with 1.125 Shaft Diameter (182-184T or 213-215) IEC - Pedestal with 28mm Shaft Diameter (1/112, B3) Position 8 2,5,12,25,75,125 - Dash Position 9 SHAFT /GEAR / MAGNET OPTIONS 2,5,12,25,75,125 DRIVE IDLER STANDARD MAGNET MATERIAL (SHAFT / GEAR) (SHAFT / GEAR) E2,E75,E125 E5,E12,E25 MAXIMUM Temperature S 316SS / PTFE 316SS / PTFE 2 F (93 C) F 316SS / 316SS 316SS / PTFE 2 F (93 C) B ALUMINA / PTFE ALUMINA / PTFE Samarium Cobalt Neodymium 2 F (93 C) A Alloy C / PTFE Alloy C / PTFE 2 F (93 C) C Alloy C / Alloy C Alloy C / PTFE 2 F (93 C) V 316SS / 316SS 316SS / 316SS NOT AVAILABLE 3 F (149 C) D Alloy C / Alloy C Alloy C / Alloy C NOT AVAILABLE Neodymium 3 F (149 C) E Alloy C / Alloy C 316SS / 316SS NOT AVAILABLE 3 F (149 C) T 316SS / 316SS 316SS / PEEK 4 F (24 C) G Alloy C / Alloy C Alloy C / PEEK Samarium Cobalt Samarium Cobalt 4 F (24 C) P ALUMINA / PEEK ALUMINA / PEEK 4 F (24 C) H 316SS / 316SS 316SS / 316SS 45 F (232 C) J Alloy C / Alloy C Alloy C / Alloy C Samarium Cobalt Samarium Cobalt 45 F (232 C) K Alloy C / Alloy C 316SS / 316SS 45 F (232 C) Position 1 OPTIONS 2,5,12,25,75,125 N WET END ONLY (Requires 7th position code identifying motor frame mounting) All pumps include ATEX Directive - CE Ex II 2G TX II 2D TX pulsa.com 11
KOPKIT (KEEP ON PUMPING KIT) Designed to guard against unnecessary downtime and assure the highest level of efficient and uninterrupted service from your pump. In the event of a breakdown, KOPkit will put you back in business fast! BACK PRESSURE VALVES Particularly useful in metering applications or other low-flow systems Prevents mainstream pressure surges and siphoning PRESSURE GAUGES Relied on to measure pressure in the system. Proper pressure is necessary to ensure flow. Accurate and reliable. PRESSURE RELIEF VALVES Prevent an over pressurization situation from damaging your pump or system. Y-STRAINERS Capture out debris in pipelines, protecting equipment and processes. Prevent premature wear of the rotating components within a pump. ENGINEERED PRODUCTS Pulsafeeder, Inc. 2883 Brighton Henrietta Town Line Rd Rochester, NY 14623 Phone: +1 (585) 292-8 pulsa@idexcorp.com pulsa.com VISIT OUR DISTRIBUTOR LOOKUP Copyright 217 Pulsafeeder. All Rights Reserved. PulsaEPO_ Eclipse_Rev217