Figure 215. Slide through, O-port gate design for severe service applications. Features
|
|
|
- Adele Hubbard
- 6 years ago
- Views:
Transcription
1 Slide through, O-port gate design for severe service applications Features General Application For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining Wastewater Technical data Size range: DN (NPS 2-24) Pressure rating: 1000 kpa (150 psi) CWP Options: Hardface seat Purge ports Hardened gate V-Port or diamond port for throttling Gate guard Ideal valve for dense slurry and solids applications and wet or dry abrasives. Slide through gate design cuts through solids providing consistent operation in the most difficult applications. O-port style gate fully protects the seat face in open position, giving you longer service life. Will close through a static column of material. Fully fabricated from heavy plate and sheet. Available in 304, 316 and 317L stainless steel wetted parts or custom designed for your needs using a wide variety of materials including - Monel - Titanium - 254SMO - Hastelloy - Alloy S/S MSS face-to-face standard. Other special face-to-face dimensions are available. Precision machined seat with multiple gate guides. Uni-directional shut-off. Full operation, leakage and cycling tests. Certified test reports on request. Available operators and accessories Handwheel (standard) Bevel gear Lock-Pin for open, closed or both Air/Hydraulic/Spring cylinders Electric motor operators Control accessories Extension stems, floorstands Stem guides Emerson. All rights reserved. VCTDS EN 16/04
2 Why a Slide Gate Valve? The Keystone F215 slide gate valve is designed to cut through solids to give you consistent shut-off in the most difficult applications. Unlike a conventional knife gate valve, the F215 does not have to push its way through the media; it simply displaces it, making the valve ideal for dense slurry and solids applications. The F215 also features a fully protected seat face, giving you longer service life. With a conventional knife gate valve, solids may build up in front of the exposed seat. This can cause problems; the seat is subject to wear and the gate may not fully close. Using a slide gate valve, a similar buildup may occur, but the seat is protected and......instead of having to push its way through, the gate moves into the lower body, taking the solids with it......when the gate goes to the open position, the solids are drawn back out and sent downstream. Specification, Figure F215-(SF) Bonnetless slide gate valve, 1000 kpa (150 psi) design for 1000 kpa (150 psi) CWP, MSS-SP81 face-to-face dimension with flanges drilled and tapped to ASME B16.5/150, AS 2129 or DIN PN10 with machined raised gasket faces. Valve body shall be fully fabricated from heavy gauge stainless steel with steel plate body and port flanges. Inlet port and seat face to be hard surfaced with hard gate guides and four (4) purge ports. Seating shall be in one direction. Gate to be hardened stainless steel finish ground, with a round orifice hole in gate, in line with seat I.D. To deter atmospheric leakage, the valve body features an adjustable packing assembly at each end consisting of multiple layers of braided asbestos free PTFE impregnated synthetic or equal packing around gate evenly compressed by a one-piece packing gland. Valve is equipped with a heavy-duty double acting cylinder actuator assembled to a self-supporting yoke. The clevis shall be fabricated from three pieces, with the top piece drilled and tapped to accept a threaded-welded connector rod. Grade 8 gate bolts used unless stainless steel bolting is required. Specify Keystone F215-(SF) as manufactured by emerson Valves & Controls. 2
3 Features Umbrella stop-stud assembly allows gate adjustment, assures proper flow Heavy cross-section stem, single-lead ACME threads for ease of operation Self-locking retaining nut Cast iron handwheel Acid-resistant bronze stem nut for smooth operation Heavy-duty steel T-Bar yoke provides greater strength Precision ground stainless steel gate for tight shut-off Multiple rows of AFPL or other packing at both ends Locknuts used on all bolting Smooth flowing fabricated steel body Flanges drilled and tapped to ASME B16.5/150 or AS 2129 Machined gasket faces Gate protects seat when valve is in full open position, ideal for heavy stock and cutting through static columns Full gate guides to assure proper seating Metal-to-metal seat (O-ring or hard surfaced available) Steel plate body and port flanges, heavy-duty construction throughout for strength Heavy reinforced cast ductile iron packing gland at both ends Note: round port design is depicted, optional diamond port or V-Port available for throttling. 3
4 RECYCLE APPLICATIONS WITH F215-(SF) The Keystone F215 can be modified to survive the rigors of recycle applications. It is well suited for use on cyclones, junk traps, repulpers (isolation and dump valves) and others. Specify the F215-(SF) secondary fiber slide gate valve and you will get a heavy duty slide through gate design that can cut through solids like wires, staples, and heavy stock. The F215-(SF) features a fully protected seat, a hardened gate, port, seat and guides along with purge ports, giving you a long service life. Available in any size, with ASME, AS2129 or DIN drilling to match specific applications. Standard Heavy-duty construction Slide through design Protected seat in open position ASME flange drilling Specify the F215-(SF) and you will get Purge ports Hardened gate Hard seat face Hard inlet Hard gate guides Optional Ni-Hard deflector cone Gate guards (upper and lower) DIN flange drilling K v * (C v ) Values Valve size DN (NPS) Flow round port Area of opening Flow diamond port Area of opening 50 (2) 1.09 (288) 20.0 (3.1) (3) 2.46 (649) 45.8 (7.1) 0.39 (104) 13.5 (2.1) 100 (4) 4.37 (1154) 81.3 (12.6) 0.87 (230) 30.3 (4.7) 150 (6) 9.83 (2596) (28.3) 2.38 (628) 82.6 (12.8) 200 (8) (4618) (50.3) 4.68 (1237) (24.5) 250 (10) (6605) (78.5) 9.13 (2413) (46.3) 300 (12) (9561) (113) (3333) (61.9) 350 (14) (12686) (145.9) (4378) (81.3) 400 (16) (14878) (188.7) (5860) (108.8) 450 (18) (18391) (240.5) (7388) (137.2) 500 (20) (21424) (298.6) (8970) (166.5) 600 (24) (30852) (433.7) (13184) (244.8) * Area is in square centimeters. Flow is in cubic meters per minute of water at 0.07 bar pressure drop. Area is in square inches. Flow is gallons per minute (GPM) of water at 1 psi pressure drop. Code of Material Item A B C D F H K Seat L 317L Wetted body parts Carbon steel 317L 317L Gate L 317L Stem Flange faces Carbon steel 317L 317L Flanges/Gussets Carbon steel Carbon steel Carbon steel Carbon steel 317L Packing gland Cast ductile* Cast ductile* Cast ductile* Cast ductile* 317L Packing AFPL AFPL AFPL AFPL AFPL AFPL AFPL Bolting Plated steel Plated steel Plated steel Plated steel 304 Yoke Carbon steel Carbon steel Carbon steel Carbon steel 304 Handwheel Cast ductile Cast ductile Cast ductile Cast ductile Cast ductile Cast ductile Cast ductile AFPL is an asbestos free PTFE impregnated synthetic packing suitable for services up to 260 C (500 F) and a ph of 3-11, other packings are available. * Alternate material is fabricated carbon steel. 4
5 ØE C1 C ØA D F G Dimensions and weights Valve size DN (NPS) ØA C C1 D ØE F G Weight kg (lbs) 50 (2) 150 (6.0) 397 (15.63) 457 (18.00) 50 (1.88) 200 (8) 210 (8.25) 292 (11.50) 35 (77) 80 (3) 190 (7.5) 451 (17.75) 533 (21.00) 50 (2.00) 300 (12) 210 (8.25) 292 (11.50) 35 (77) 100 (4) 230 (9.0) 492 (19.38) 600 (23.63) 50 (2.00) 300 (12) 251 (9.88) 359 (14.13) 41 (90) 150 (6) 279 (11.0) 619 (24.38) 781 (30.75) 57 (2.25) 300 (12) 334 (13.13) 495 (19.50) 54 (119) 200 (8) 343 (13.5) 721 (28.38) 933 (36.75) 70 (2.75) 300 (12) 410 (16.13) 622 (24.50) 74 (162) 250 (10) 406 (16.0) 835 (32.88) 1102 (43.38) 70 (2.75) 400 (16) 502 (19.75) 768 (30.25) 108 (238) 300 (12) 483 (19.0) 937 (36.88) 1254 (49.38) 75 (3.00) 400 (16) 588 (23.13) 905 (35.63) 148 (325) 350 (14) 533 (21.0) 975 (38.38) 1324 (52.13) 75 (3.00) 500 (20) 632 (24.88) 981 (38.63) 201 (442) 400 (16) 597 (23.5) 1060 (41.75) 1461 (57.50) 90 (3.50) 500 (20) 721 (28.38) 1121 (44.13) 254 (558) 450 (18) 635 (25.0) 1143 (45.00) 1594 (62.75) 90 (3.50) 500 (20) 797 (31.38) 1248 (49.13) 287 (632) 500 (20) 700 (27.5) 1384 (54.50) 1708 (67.25) 115 (4.50) 500 (20) 883 (34.75) 1384 (54.50) 410 (901) 600 (24) 813 (32.0) 1429 (56.25) 2032 (80.00) 115 (4.50) 750 (30) 1105 (43.50) 1708 (67.25) 518 (1139) 5
6 2017 Emerson. All rights reserved. 6
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The SERIES 90 knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as: Power
Master Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
CLARKSON SLURRY KNIFE GATE VALVES KGA
The Clarkson slurry knife gate valves feature heavy-duty, full port elastomer sleeves offering the ultimate isolation against heavy slurries FEATURES Meets a wide range of abrasion, corrosion, temperature,
CLARKSON SLURRY KNIFE GATE VALVES KGF AND KGF-HP
The Clarkson KGF and KGF-HP slurry knife gate valves provide proven slurry valve technology in higher pressures FEATURES GENERAL APPLICATIONS Mining Power Pulp and paper Alumina Chemical Cement TECHNICAL
BULLETIN B NOVEMBER DeZURIK KSV SEVERE SERVICE KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 51.00-1B NOVEMBER 2016 DeZURIK KSV SEVERE SERVICE KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Class 150/300 Bonnetless Item Description Material A1 Body Carbon Steel,
COMMERCIAL VALVES. When QUALITY, SERVICE and PRICE MATTER MOST! GATE VALVES GLOBE VALVES CHECK VALVES BUTTERFLY VALVES
COMMERCIAL CONSTRUCTION FIRE PROTECTION HVAC IRRIGATION MINING WATER & WASTE MANAGEMENT OIL & GAS POWER GENERATION When QUALITY, SERVICE and PRICE MATTER MOST! COMMERCIAL VALVES GATE VALVES GLOBE VALVES
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
RB WEIR GATES MODEL GENERAL DESCRIPTION DESIGN CONSTRUCTION
GENERAL DESCRIPTION The Orbinox model RB Weir Gate is designed for downward opening applications where a more accurate flow control is required. The water flows over the top of the slide permitting a constant
KEYSTONE SERIES GR RESIlIENT SEATED BUTTERFly VAlVES GRF
A heavy duty double flanged concentric design resilient seated butterfly valve FEATURES GENERAL APPLICATION These valves are for water or air service where a drop-tight shut-off and double flanged body
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
KNIFE GATE & SLURRY VALVE PRODUCT GUIDE
KNIFE GATE & SLURRY VALVE PRODUCT GUIDE BRAY.COM Contents Series 700 Page Series 740 Bidirectional Knife Valve 4 Series 745 Bidirectional Slurry Valve 4 Series 746 Bidirectional Slurry Valve 5 Series 752
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
ANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
Table of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
Butterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
Cast Iron Valves and Strainers
Cast Iron Valves and Strainers Proven reliability Robust design Economical Cast Iron Gate Valve F I G G A 1 4 G A T E V A L V E Heavy duty design Dezincification resistant trim Outside screw and yoke,
ISOGATE Slurry Valves. Slurry Equipment Solutions. WS Heavy Duty Slurry Valve
ISOGATE Slurry Valves Slurry Equipment Solutions WS Heavy Duty Slurry Valve Weir Minerals are specialists in delivering and supporting Slurry Equipment Solutions including pumps, hydrocyclones, valves
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
Size range: 2-24 Temperature rating: Standard sleeve rated to 180 F, up to 300 F with optional elastomer selection Standard pressure 2-16
The Clarkson KGD wafer style slurry knife gate valve offers the latest in elastomer technology with the Mark III sleeve design. KGD Mark III Sleeve The Mark III incorporates advanced features gained from
ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
SECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
World Class Bellows Seal Valves
World Class Bellows Seal Valves Fugitive Emissions Sealing High Cycle Bellows In-Line Servicing High Flow Capacity Conval Bellows Seal Valves meet all of the rigorous requirements of MSS SP-117, ensuring
WOUTER WITZEL EUROVALVE. Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve
Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve 2 WOUTER WITZEL EUROVALVE Dynaxe sets the new standard for double-offset butterfly valves. It is the
PN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
KEYSTONE RMI DUBEX BUTTERFLY VALVE AWWA FACE-TO-FACE
The Dubex is a double flanged, triple eccentric resilient seated valve design for services in the water industry FEATURES GENERAL APPLICATION Drinking water pump station and transportation/distribution.
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
5000 SERIES SHORT PATTERN BALL VALVE
5000 SERIES SHORT PATTERN BALL VALVE Short Pattern Valve for industrial and process applications. Design Pressure Rating 150# Through 2500# Valve Size 1/2 to 12 150# to 300# 1/2 to 10 600# 1/2 to 8 900#
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
Anderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN
OpTB TM Trunnion Ball Valve
INTRODUCTION The Optimux OpTB brings the legendary and well proven robustness and dependability of the trunnion ball design to process control applications, no longer limited to a full port option, but
BULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
SECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
Stainless Steel Aeration Equipment Specification
Section 15 Stainless Steel Aeration Equipment Specification Part 1 - General 1.01 Description A. Scope of Work 1. Furnish, install and test aeration system including air mains, drop pipes, valves, expansion
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
Industry Leading Innovation. Family of 4000's FLANGED BALL VALVES SERIES
Industry Leading Innovation Family of 4000's FLANGED BALL VALVES 4000 SERIES Industry Leading Innovation QUALITY STATEMENT American Valve commits itself to consistently fulfilling our customers' needs
1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
GD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /
DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2
FLANGE DIMENSIONS TABLE TYPES
ADELAIDE BRISBANE PERTH OVERVIEW FLANGE DIMENSIONS TABLE TYPES In Australia the BS and AS fl ange standards are essentially the same but have been metricated. Consequently metric sizes are stated as DN
Underground fire hydrants
Underground fire hydrants The company was founded in 987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing company, through
Weir Valve Selections
Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless
M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
2000-SG STAINLESS STEEL SLIDE GATES
2000-SG STAINLESS STEEL SLIDE GATES 1. GENERAL CONDITIONS 1.1. SCOPE. This section covers Stainless Steel Flow Control Slide Gates and operators. 1.2. GENERAL. Slide gates, including actuation devices,
SECTION HANGERS AND SUPPORTS PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.
1.01 RELATED DOCUMENTS SECTION 15060 HANGERS AND SUPPORTS PART 1 - GENERAL A. Drawings and Division 1 Specification Sections, apply to this Section. 1.02 SUMMARY A. This Section includes hangers and supports
We Offer Both Cast Ball Valves & Forged Ball Valves.
11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port
SERIES FLANGED BALL VALVES.
4000 SERIES FLANGED BALL VALVES www.americanvalve.com Industry-Leading Innovation American Valve commits itself to consistently fulfilling our customers' needs and expectations by supplying products that
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
DEMCO BUTTERFLY VALVES. Features and Benefits 1 Styles and Accessories 3 PRODUCT SPECIFICATIONS
TABLE OF CONTENTS BUTTERFLY VALVES Features and Benefits Styles and Accessories 3 PRODUCT SPECIFICATIONS How to Order Valves 5 Base Numbers and Weights 8 Component Parts List 9 Dimensional Data (Valves)
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
PBV Ball Valves. Severe Service Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
PBV Ball Valves Severe Service Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 56-59-400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At Forum Energy Technologies
DISTRIBUTED VALVES. DEMCO Gate Valves DEMCO
Gate Valves 2 TABLE OF CONTENTS Gate Valves Introduction... 4 Series DM Gate Valves... 5 Series DM 7500 Gate Valves... 7 Series DT/DB Gate Valves... 9 PRODUCT SPECIFICATIONS General Technical Information...
VALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
Masoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Name Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the control of pressure,
Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry
Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES
THE HIGH PERFORMANCE COMPANY
THE HIGH PERFORMANCE COMPANY Product Profile THE HIGH PERFORMANCE COMPANY Table of Contents Bray Tri Lok 4 Bray/McCannalok 4 Bray Resilient Seated Butterfly Valves 5 Series 20/21 5 Series 22/23 5 Series
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
brands you trust. CRANE Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. CRANE Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & Benefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering: Class
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
SECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
Cast Iron Sluice Gates Rugged Dependability in Demanding Applications
Cast Iron Sluice Gates Rugged Dependability in Demanding Applications A Proud Tradition Since 1840, the team at Rodney Hunt has pioneered safe and reliable flow control systems to help communities and
2. REFERENCE SPECIFICATIONS
TABLE OF CONTENTS 1. Scope 2. Reference Specifications 3. Ordering Information 4. Source Inspection at Foundry 5. Shipping Preparation for Castings 6. Incoming Inspection at Farris All Material 7. Incoming
C-FPV-0810 Catalog C-FPV-0810 A h e A d O F t h e F l O w F i r e P r o t e c t i o n Va l v e s
catalog C-FPV-0810 a h e a d o f t h e f l o w F i r e P r o t e c t i o n Va l v e s Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
PN 16 catalogue-no. AW-C31
Series AW butterfly valve, wafer type PN 10 catalogue-no. AW-B21 PN 16 catalogue-no. AW-C31 size Pressure rating PN Hydrost. Test pressure in bars for working pressure in bars at working termperatures
PARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
C-BV-0812 Catalog C-BV-0812 A h e A d O f t h e f l O w B a l l Va l v e s
catalog C-bV-0812 ahead of the flow Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
VALVE SELECTION GUIDE FOR THE HYDROPOWER INDUSTRY
BULLETIN 10.00-14 JULY 2014 VALVE SELECTION GUIDE FOR THE HYDROPOWER INDUSTRY www.dezurik.com The DeZURIK Difference Throughout our 250 years of combined history, DeZURIK, APCO, HILTON and Willamette have
With World Class Quality
Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler
AheAd OF the FlOw. Fire Protection Valves
Catalog C-FPV-0512 AheAd OF the FlOw Fire Protection Valves Business-to-Business solutions look to nibco for technology leadership. the velocity with which e-business evolves demands that new products
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
International Standard Valve, Inc.
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are their special options is a registered trademark of International Standard Valve, Inc. www.isvalve.com
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
SPECIFICATIONS - DETAILED PROVISIONS Section Horizontal Centrifugal Water Pumps C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11931 - Horizontal Centrifugal Water Pumps C O N T E N T S PART 1 - GENERAL... 1 1.01 PUMP - GENERAL... 1 1.02 CERTIFIED PUMP CURVES... 1 1.03 NPSH REQUIREMENTS...
D I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO
TM TECHNO Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED
AheAd OF the FlOw. Butterfly Valves
Catalog C-BFV-0912 AheAd OF the FlOw Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
KEYSTONE SWING TYPE WAFER CHECK VALVE FIGURE 86
High capacity, spring loaded swing type wafer check valve FEATURES Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long High flow capacity featuring a special
VENTURI FLOWMETERS. Your First Choice in Intelligent Flow Management...
VENTURI FLOWMETERS Your First Choice in Intelligent Flow Management... VENTURI FLOWMETERS Preso s complete line of Venturis offer reduced operating costs, proven accuracy, and great rangeability. Low permanent