PLASTIC CONDUIT SYSTEMS 1 MADE FROM PVC 4 2 MADE FROM HALOGEN FREE RAW MATERIALS 18 3 WITH ANTIMICROBIAL PROTECTION 30 4 BURIED UNDERGROUND 42

PRODUCT CATALOGUE

PLASTIC CONDUIT SYSTEMS MADE FROM PVC 4 2 MADE FROM HALOGEN FREE RAW MATERIALS 8 3 WITH ANTIMICROBIAL PROTECTION 3 4 BURIED UNDERGROUND 42 5 FOR CONCEALED INSTALLATIONS 5 TECHNICAL INFORMATION 56

GREEN PRODUCT We are a purely Greek second-generation family company, specialized in the development and production of plastic conduit systems since 979. Holding a leading position in the Greek market we constantly seek to achieve excellence through the design and production of innovative, value-added products for electrical installations. We do not use hazardous chemicals, we have adopted the REACH and RoHS European Regulations since 26 and we apply a complete total quality model with Management Systems for more than 5 years covering quality, people and environment. We have a clearly customer-oriented philosophy, we design considering our customers needs, the environment and the technological progress and we offer modern and essential solutions. Ιn the following pages you will get familiar with all of our plastic conduit systems which we manufacture for alternative application fields. 3

Plastic conduit systems made from PVC 4

Tried has over 37 years of experience in plastic conduit systems for cable protection while it was the first Greek company to introduce the heavy type conduits into the Greek market at the early 9 s. Tested is the only Greek company that has been awarded certificates for all of its products by the German VDE test institute. Trusted The heavy type CONDUR - CONFLEX conduit system has totally replaced metal conduits, it has been installed in the largest Greek construction works and it counts zero non-conformities. Conduit System Patented No: 7269 Hellenic Industrial Property Organization 5

Plastic conduit systems made from PVC Heavy (25Nt) RAL 735 light grey CONDUR rigid conduit Class Resistance to compression 25Nt/5cm 4 Resistance to impact 6J (at -25 C) 4 Lower temperature range -25 C 4 Upper temperature range +6 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 67 (when connected with CONDUR coupler) 6 7 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared 444 UV RESISTANT Standards EN 6386.2 Assembled with CONDUR Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC Ageing resistance UV stabilized > years Rodent Repellent Not attractive to rodents Engraved with laser printing and packed with safety straps in blue color % recyclable polyethylene film. Ideal for outdoor exposed installations which require increased safety measures and high mechanical requirements such civil engineering (industrial buildings, infrastructure projects) and electric power stations. Their high impact strength, at low temperature environments, make them also ideal for cold weather conditions. kg (m) 6 All product s certificates are available at www.kouvidis.com Ø6 256 6 2.6 3 3.42 9 Ø2 252 2 6.4 3 4.43 54 Ø25 2525 25 2.2 5 3.8 375 Ø32 2532 32 27.7 5 4.2 234 Ø4 254 4 35.6 9 3.4 53 Ø5 255 5 45. 9 4.5 99 Ø63 2563 63 56.7 9 6.58 63

Plastic conduit systems made from PVC Heavy (25Nt) RAL 735 light grey CONFLEX pliable conduit Class Resistance to compression 25Nt/5cm 4 Resistance to impact 6J (at -25 C) 4 Lower temperature range -25 C 4 Upper temperature range +6 C Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 66 (when connected with CONDUR coupler) Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared 6 6 4442 UV RESISTANT Standards EN 6386.22 Assembled with CONDUR Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC Ageing resistance UV stabilized > years Rodent Repellent Not attractive to rodents Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative blue color label. Ideal for installations in concrete and outdoor exposed installations which require increased safety measures and high mechanical requirements such civil engineering (industrial buildings, infrastructure projects) and electric power stations. Their high impact strength, at low temperature environments, make them also ideal for cold weather conditions. Ø6 2256 6.8 5 4.2 38 Ø2 2252 2 4 5 5.57 34 Ø25 22525 25 8.2 25 3.96 9 Ø32 22532 32 24. 25 5.6 4 Ø4 2254 4 3.9 2 5.39 96 Ø5 2255 5 39.2 2 7.5 4 Ø63 22563 63 52 2. 36 kg (m) 7

Plastic conduit systems made from PVC Medium (75Nt) Standards EN 6386.2 Assembled with MEDISOL Bend CONDUR Coupler CONDUR Adapter CONDUR Clip RAL 735 light grey + MEDISOL rigid conduit Class Resistance to compression 75Nt/5cm 3 Resistance to impact 2J (at -25 C) 3 Lower temperature range -25 C 4 Upper temperature range +6 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 67 (when connected with CONDUR coupler) 6 7 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC Ageing resistance UV stabilized Rodent Repellent Not attractive to rodents Engraved with laser printing and packed with safety straps in red color % recyclable polyethylene film. Ideal for indoor exposed installations which require increased safety measures and standard mechanical requirements such parking areas, commercial buildings, warehouses, wooden structures. Their high impact strength, at low temperature environments, make them also ideal for cold weather conditions. 334 UV RESISTANT kg (m) 8 All product s certificates are available at www.kouvidis.com Ø6 356 6 3.2 3 2.83 9 Ø2 352 2 6.8 3 3.72 54 Ø25 3525 25 22 3 5. 36 Ø32 3532 32 28.7 5 3.52 234 Ø4 354 4 36.6 9 3. 53 Ø5 355 5 45.8 9 3.78 99 Ø63 3563 63 58.4 9 5.67 63

Plastic conduit systems made from PVC Medium (75Nt) Standards EN 6386.22 Assembled with MEDISOL Bend CONDUR Coupler CONDUR Adapter CONDUR Clip RAL 735 light grey + MEDIFLEX pliable conduit Class Resistance to compression 75Nt/5cm 3 Resistance to impact 2J (at -25 C) 3 Lower temperature range -25 C 4 Upper temperature range +6 C Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 66 (when connected with CONDUR coupler) 6 6 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC Ageing resistance UV stabilized Rodent Repellent Not attractive to rodents Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative red color label. Ideal for installations in concrete/cavity walls and indoor exposed installations which require increased safety measures and standard mechanical requirements such parking areas, commercial buildings, warehouses, wooden structures. Their high impact strength, at low temperature environments, make them also ideal for cold weather conditions. Ø6 2356 6.9 5 2.85 38 Ø2 2352 2 4.3 5 3.9 34 Ø25 23525 25 8.6 25 2.74 9 Ø32 23532 32 24.4 25 3.82 4 Ø4 2354 4 3.3 2 3.93 96 Ø5 2355 5 39.3 2 4.99 4 Ø63 23563 63 52. 2 6.8 36 kg (m) 3342 UV RESISTANT 9

Plastic conduit systems made from PVC Medium (75Nt) RAL 735 light grey MEDISOL ST rigid conduit Class Resistance to compression 75Nt/5cm 3 Resistance to impact 2J (at -5 C) 3 Lower temperature range -5 C 2 Upper temperature range +6 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 67 (when connected with CONDUR coupler ) 6 7 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC 332 Standards EN 6386.2 Assembled with MEDISOL Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + Engraved with laser printing and packed with safety straps in red color % recyclable polyethylene film. Ideal for indoor exposed installations with standard mechanical requirements such commercial buildings, residential buildings, wooden structures. kg (m) All product s certificates are available at www.kouvidis.com Ø6 356 6 3.2 3 2.8 9 Ø2 352 2 6.8 3 3.62 54 Ø25 3525 25 22 3 5.4 36 Ø32 3532 32 28.7 5 3.36 234 Ø4 354 4 36.3 9 2.82 53 Ø5 355 5 45.8 9 3.77 99 Ø63 3563 63 58.4 9 5.5 63

Plastic conduit systems made from PVC Medium (75Nt) RAL 735 light grey MEDIFLEX ST pliable conduit Class Resistance to compression 75Nt/5cm 3 Resistance to impact 2J (at -5 C) 3 Lower temperature range -5 C 2 Upper temperature range +6 C Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 66 (when connected with CONDUR coupler) 6 6 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC 3322 Standards EN 6386.22 Assembled with MEDISOL Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative blue color label. Ideal for installations in concrete/cavity walls and indoor exposed installations with standard mechanical requirements such commercial buildings, residential buildings, wooden structures. kg (m) Ø6 2356 6.9 5 2.69 38 Ø2 2352 2 4.3 5 3.88 34 Ø25 23525 25 8.6 25 2.59 9 Ø32 23532 32 24.4 25 3.5 4 Ø4 2354 4 3.3 2 3.67 96 Ø5 2355 5 39.3 2 4.76 4 Ø63 23563 63 52. 2 6.7 36

Plastic conduit systems made from PVC Light (32Nt) RAL 735 light grey SILCOR rigid conduit Resistance to compression 32Nt/5cm Class 2 Resistance to impact 2J (at -25 C) 3 Lower temperature range -25 C 4 Upper temperature range +6 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 67 (when connected with CONDUR coupler) 6 7 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC 234 Standards EN 6386.2 Assembled with SILCOR Bend CONDUR Coupler CONDUR Clip CONDUR Adaptor + Engraved with laser printing and packed with safety straps in light blue color % recyclable polyethylene film. Ideal for indoor exposed installations with light mechanical requirements such commercial buildings, residential buildings. Their high impact strength, at low temperature environments, make them also ideal for cold weather conditions. kg (m) Ø6 56 6 4. 9 5.42 63 Ø2 52 2 8.2 6 5.9 54 Ø25 525 25 22.9 45 5.23 36 Ø32 532 32 29.6 3 4.87 2 All product s certificates are available at www.kouvidis.com 2

Plastic conduit systems made from PVC Light (32Nt) RAL 735 light grey SIFLEX pliable conduit Class Resistance to compression 45Nt/5cm 2 Resistance to impact J (at -25 C) 2 Lower temperature range -25 C 4 Upper temperature range +6 C Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 66 (when connected with CONDUR coupler) 6 6 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC 2242 Standards EN 6386.22 Assembled with SILCOR Bend CONDUR Coupler CONDUR Clip CONDUR Adaptor + Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative blue color label. Ideal for concealed installations, cavity walls and indoor exposed installations with light mechanical requirements such commercial buildings, residential buildings. Their high impact strength, at low temperature environments, make them also ideal for cold weather conditions. kg (m) Ø6 256 6.2 5 2.23 38 Ø2 252 2 4.8 5 2.76 34 Ø25 2525 25 8.9 25.88 8 Ø32 2532 32 24.6 25 2.53 4 Ø4 254 4 3.6 2 2.95 88 Ø5 255 5 39.8 2 3.77 4 Ø63 2563 63 52.8 2 4.87 36 3

Plastic conduit systems made from PVC Light (32Nt) RAL 735 light grey SILCOR ST rigid conduit Class Resistance to compression 32Nt/5cm 2 Resistance to impact 2J (at -5 C) 3 Lower temperature range -5 C 2 Upper temperature range +6 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 67 (when connected with CONDUR coupler) 6 7 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC 232 Standards EN 6386.2 Assembled with SILCOR Bend CONDUR Coupler CONDUR Clip CONDUR Adaptor + Engraved with laser printing and packed with safety straps in light blue color % recyclable polyethylene film. Ideal for indoor exposed installations with light mechanical requirements such residential buildings. kg (m) Ø6 56 6 2.6 9 5.32 63 Ø2 52 2 6.4 6 4.99 54 Ø25 525 25 2.2 45 5.8 36 Ø32 532 32 27.7 3 4.67 2 All product s certificates are available at www.kouvidis.com 4

Plastic conduit systems made from PVC Light (32Nt) RAL 735 light grey SIFLEX ST pliable conduit Class Resistance to compression 45Nt/5cm 2 Resistance to impact J (at -5 C) 2 Lower temperature range -5 C 2 Upper temperature range +6 C Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 66 (when connected with CONDUR coupler) 6 6 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC 2222 Standards EN 6386.22 Assembled with SILCOR Bend CONDUR Coupler CONDUR Clip CONDUR Adaptor + Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative blue color label. Ideal for concealed installations, cavity walls and indoor exposed installations with light mechanical requirements such residential buildings. kg (m) Ø6 256 6 2.6 5 2.5 38 Ø2 252 2 6.4 5 2.66 34 Ø25 2525 25 2.2 25.78 8 Ø32 2532 32 27.7 25 2.4 4 Ø4 254 4 35.6 2 2.8 88 Ø5 255 5 45. 2 3.57 4 Ø63 2563 63 56.7 2 4.65 36 5

Plastic conduit systems made from PVC Heavy (25Nt) RAL 735 light grey CONDUR bend Resistance to impact 6J (at -25 C) Ageing resistance UV stabilized Rodent Repellent Not attractive to rodents UV RESISTANT A R Ø6 43256 6 2.7 27 55 46 Ø2 43252 2 6.2 35 65 42 Ø25 432525 25 2.2 36.7 9 7 Ø32 432532 32 27.5 47.6 25 6 48 Ø4 43254 4 35.4 52.9 3 6 84 Ø5 43255 5 45 62 63 4 36 Ø63 432563 63 57.5 77 9 4 6 Medium (75Nt) RAL 735 light grey MEDISOL bend Resistance to impact 2J (at -25 C) Ageing resistance UV stabilized Rodent Repellent Not attractive to rodents UV RESISTANT A R Ø6 43356 6 3.3 27 55 46 Ø2 43352 2 6.9 35 65 42 Ø25 433525 25 2.9 36.7 9 7 Ø32 433532 32 28.6 47.6 25 6 48 Ø4 43354 4 36.4 52.9 3 6 84 Ø5 43355 5 45.8 62 63 4 36 Ø63 433563 63 58 77 9 4 6 All product s certificates are available at www.kouvidis.com 6

Plastic conduit systems made from PVC Light (32Nt) RAL 735 light grey SILCOR bend Resistance to impact 2J (at -25 C) A R Ø6 4356 6 4.2 27 55 4 56 Ø2 4352 2 8. 35 65 4 6 Ø25 43525 25 22.8 36.7 9 2 28 Ø32 43532 32 29.7 47.6 25 9 8 Standards EN 6386.2 General properties for Bends Temperature range IP ingress protection Raw material Electrical characteristics Resistance to flame propagating -25 C to +6 C IP 67 (when connected with couplers) Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC With electrical insulated characteristics Non flame propagating Note: Bends packaging do not contain coupler. 7

2 Plastic conduit systems made from halogen free raw materials 8

Why halogen free? In case of a fire accident, toxic gases are released from plastics containing halogens. The chlorine and fluorine released from halogenated plastics produce hydrochloric acid and gases which are dangerous and very harmful to people and the environment. Ensure your safety During combustion halogens produce gases, soot and chemical residues that generate dark and dense smoke waves which reduce the visibility of escape routes and hinder evacuation operations by rescue crews. Protect your equipment The acid rain anticipated from combustion of halogenic plastics can damage all areas exposed to smoke and cause severe corrosion in a particularly short time. has more than years manufacturing experience in the production of halogen free materials and is one of the precious few manufacturers in Europe that offers it in heavy type version. 9

2 Plastic conduit systems made from halogen free materials Heavy (25Nt) RAL 735 light grey Standards EN 6386.2, EN 5267-2-2, EN 634- Assembled with CONDUR HF Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + CONDUR HF rigid conduit Class Resistance to compression 25Nt/5cm 4 Resistance to impact 6J (at -25 C) 4 Lower temperature range -25 C 4 Upper temperature range +9 C 2 Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 65 (when connected with CONDUR coupler) 6 5 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Ageing resistance UV stabilized Halogen Free No toxic or corrosive gases in case of fire Low smoke Better visibility of escape ways Printed with indelible green color and packed with safety straps in blue color % recyclable polyethylene film. Ideal for outdoor/indoor exposed installations which require increased safety measures and high mechanical requirements such public gathering places (airports, hotels, tunnels, malls, theaters, subways etc,) and places with costly mechanical equipment (engine rooms, industrial spaces, computer rooms, etc.). 4442 UV RESISTANT LSHF kg (m) 2 All product s certificates are available at www.kouvidis.com Ø6 5256 6 2.9 3 2.66 9 Ø2 5252 2 6.8 3 3.55 54 Ø25 52525 25 2.5 5 2.32 375 Ø32 52532 32 28.4 5 3.29 234 Ø4 5254 4 36. 9 2.5 53 Ø5 5255 5 45. 9 3.33 99 Ø63 52563 63 56.7 9 4.86 63

2 Plastic conduit systems made from halogen free materials Heavy (25Nt) RAL 735 light grey Standards EN 6386.22, EN 5267-2-2, EN 634- Assembled with CONDUR HF Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + CONFLEX HF pliable conduit 44422 Class Resistance to compression 25Nt/5cm 4 Resistance to impact 6J (at -25 C) 4 Lower temperature range -25 C 4 Upper temperature range +9 C 2 Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 65 (when connected with CONDUR coupler) 6 5 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Ageing resistance UV stabilized Halogen Free No toxic or corrosive gases in case of fire Low smoke Better visibility of escape ways Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative green color label. Ideal for outdoor/indoor exposed installations which require increased safety measures and high mechanical requirements such public gathering places (airports, hotels, tunnels, malls, theaters, subways etc.) and places with costly mechanical equipment (engine rooms, industrial spaces, computer rooms, etc.). UV RESISTANT LSHF kg (m) Ø6 25256 6.9 5 2.39 38 Ø2 25252 2 4 5 3.44 34 Ø25 252525 25 8.6 25 2.63 9 Ø32 252532 32 24.3 25 3.37 4 Ø4 25254 4 3.3 2 3.42 96 Ø5 25255 5 39.4 2 4.5 4 Ø63 252563 63 52. 2 6.4 36 2

2 Plastic conduit systems made from halogen free materials Medium (75Nt) RAL 735 light grey Standards EN 6386.2, EN 5267-2-2, EN 634- Assembled with MEDISOL HF Bend CONDUR Coupler CONDUR Adapter CONDUR Clip + MEDISOL HF rigid conduit Class Resistance to compression 75Nt/5cm 3 Resistance to impact 6J (at -25 C) 4 Lower temperature range -25 C 4 Upper temperature range +2 C 4 Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 67 (when connected with CONDUR coupler) 6 7 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Halogen Free No toxic or corrosive gases in case of fire Low smoke Better visibility of escape ways Printed with indelible green color and packed with safety straps in red color % recyclable polyethylene film. Ideal for indoor/outdoor exposed installations which require increased safety measures and standard mechanical requirements such public gathering places (airports, hotels, malls, theaters, etc,) and places with costly mechanical equipment (engine rooms, industrial spaces, computer rooms, etc.). 3444 UV RESISTANT LSHF kg (m) 22 All product s certificates are available at www.kouvidis.com Ø6 5356 6 2.8 3 2.8 9 Ø2 5352 2 6.6 3 3.2 54 Ø25 53525 25 2.4 3 4.4 36 Ø32 53532 32 27.9 5 2.85 234 Ø4 5354 4 35.8 9 2.5 53 Ø5 5355 5 45.3 9 3.66 99 Ø63 53563 63 56.9 9 5.4 63

2 Plastic conduit systems made from halogen free materials Medium (75Nt) Assembled with MEDISOL HF Bend CONDUR Coupler CONDUR Adapter CONDUR Clip RAL 735 light grey Standards EN 6386.22, EN 5267-2-2, EN 634- + MEDIFLEX HF pliable conduit Class Resistance to compression 75Nt/5cm 3 Resistance to impact min 2J* (at -25 C) 3 Lower temperature range -25 C 4 Upper temperature range +2 C 4 Resistance to bending Pliable 2 Electrical characteristics With electrical insulated characteristics 2 IP ingress protection IP 66 (when connected with CONDUR coupler) 6 6 Resistance against corrosion Not applicable Tensile strength None declared Resistance to flame propagating Non flame propagating Suspended load capacity None declared Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Halogen Free No toxic or corrosive gases in case of fire Low smoke Better visibility of escape ways Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative green color label. Ideal for indoor/outdoor exposed installations which require increased safety measures and standard mechanical requirements such public gathering places (airports, hotels, malls, theaters, etc,) and places with costly mechanical equipment (engine rooms, industrial spaces, computer rooms, etc.). 33442 UV RESISTANT LSHF kg (m) * 2J for diameters Ø6- Ø25 6J for diameters Ø32- Ø63 Ø6 25356 6.8 5 2.4 38 Ø2 25352 2 4 5 3. 34 Ø25 253525 25 8.2 25.9 9 Ø32 253532 32 24. 25 2.9 4 Ø4 25354 4 3.9 2 3. 96 Ø5 25355 5 39.2 2 4. 4 Ø63 253563 63 52 2 5.4 36 23

2 Plastic conduit systems made from halogen free materials Heavy (25Nt) RAL 735 light grey CONDUR HF bend Resistance to impact 6J (at -25 C) Ageing resistance UV stabilized UV RESISTANT A R Ø6 45256 6 2.7 27 55 46 Ø2 45252 2 6.2 35 65 42 Ø25 452525 25 2.2 36.7 9 7 Ø32 452532 32 27.5 47.6 25 6 48 Ø4 45254 4 35.4 52.9 3 6 84 Ø5 45255 5 45 62 63 4 36 Ø63 452563 63 57.5 77 9 4 6 LSHF Medium (75Nt) RAL 735 light grey MEDISOL HF bend Resistance to impact 6J (at -25 C) Ageing resistance UV stabilized UV RESISTANT A R Ø6 45356 6 2.7 27 55 46 Ø2 45352 2 6.2 35 65 42 Ø25 453525 25 2.2 36.7 9 7 Ø32 453532 32 27.5 47.6 25 6 48 Ø4 45354 4 35.4 52.9 3 6 84 Ø5 45355 5 45 62 63 4 36 Ø63 453563 63 57.5 77 9 4 6 LSHF All product s certificates are available at www.kouvidis.com 24

2 Plastic conduit systems made from halogen free materials Standards EN 6386.2, EN 5267-2-2, EN 634- General properties for Bends Temperature range IP ingress protection Raw material Electrical characteristics Resistance to flame propagating Halogen Free Low smoke -25 C to +2 C IP 67 (when connected with couplers) Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC With electrical insulated characteristics Non flame propagating No toxic or corrosive gases in case of fire Better visibility of escape ways Note: Bends packaging do not contain coupler. 25

2 Plastic conduit systems made from halogen free materials Fittings CONDUR Clips (Appropriate for product families & 2) Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Installation guidelines Recommended fastening space is 5cm for vertical and 4 cm for horizontal installations + They can be mounted with the use of 4mm screws and plugs. They have side slots for easy positioning to rails. UV RESISTANT LSHF A mm B mm Ø6 4256 5.8 35 4x5 28 Ø2 4252 9.8 4 4x5 2 Ø25 42525 24.8 46 4x3 8 Ø32 42532 3.8 53 3 38 Ø4 4254 39.8 63 2 92 Ø5 4255 49.8 74 2 84 Ø63 42563 62.8 88 2 84 Fittings CONDUR Adaptors (Appropriate for product families & 2) Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PE UV RESISTANT A mm B mm Ø6 4256 3 6 6 2 4x3 8 Ø2 4252 6.5 2 2 2 4x3 2 Ø25 425225 2.5 25 32 33 2 8 Ø32 425232 27.5 32 35 33 2 84 C mm D mm LSHF All product s certificates are available at www.kouvidis.com 26

2 Plastic conduit systems made from halogen free materials Fittings CONDUR Couplers (Appropriate for product families & 2) Raw material Ingress protection Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PE IP67 (when connected to rigid conduits) IP66 (when connected to pliable conduits) UV RESISTANT Ø6 42256 2 6 5.5 3 228 Ø2 42252 23.5 2 5.5.5 3 62 Ø25 422525 28.5 25 5.5.5 3 26 Ø32 422532 37 32 65 2 2 48 Ø4 42254 44.5 4 8.4 2 5 36 Ø5 42255 55.6 5.5 2.5 2 Ø63 422563 69.8 63 2 2.8 8 64 C mm D mm LSHF Standards EN 6386., EN 5267-2-2, EN 634- RAL 735 light grey General properties for Fittings Temperature range Electrical characteristics Resistance to flame propagating Halogen Free Low smoke -25 C to +2 C With electrical insulated characteristics Non flame propagating No toxic or corrosive gases in case of fire Better visibility of escape ways 27

2 Plastic conduit systems made from halogen free materials Junction Boxes (Appropriate for product families & 2) CONDUR Watertight with seals CONDUR CONDUR HF MEDISOL Raw material (box)* PC/ABS PC/ABS PS Color Light grey RAL 735 Temperature range -25 C to +6 C Electrical With electrical characteristics insulated characteristics Resistance to flame propagating Non flame propagating No of entries 7 Kind of entries Plug in seals Plug in grommets Ingress protection IP55 Flame retardant 65 C Condensation opening Yes (at each side) No of base Knock outs 4 Conduit alignment In each side Voltage 8V UV RESISTANT LSHF CONDUR HF + Watertight due to their elastic and directly mounted cover plate. Provided with plug in seals or stepped grommets for easy positioning of cables, without the use of additional fittings, after cutting at the pre-marked points. Adaptors, of different diameters, can be easily fastened in the openings after pushing out the plug in seals/grommets. CONDUR CONDUR HF MEDISOL Light grey Light grey Light grey CONDUR CONDUR HF / MEDISOL Ø6/2 326 3246 3356 24 7 Ø2/6 322 3242 3352 5 5 Ø25/32 32225 32425 33525 5 4 MEDISOL A mm 6/2 67 38 2.6 2/6 82 43 2.6 25/32 5 35. B mm C mm 28 * Cover plate material PP Plug in seals material LDPE

2 Plastic conduit systems made from halogen free materials Junction Boxes (Appropriate for product families & 2) SILCOR Watertight without seals Raw material SILCOR PC Color light grey RAL 735 Temperature range -25 C to +6 C IP ingress protection IP 65 Electrical characteristics With electrical insulated characteristics Resistance to flame propagating Non flame propagating Flame retardant 65 C Number of entries No entries Voltage 8V UV RESISTANT LSHF + Ideal for flush mounting and cavity wall installations. Junction boxes can be assembled lengthwise. A mm Ø6 356 62 32 2 Ø2 352 82 36 7 Ø25 3525 9 4 5 Ø32 3532 5 5 B mm Standards EN 667-22, EN 5267-2-2 Additional Raw material Halogen Free Low smoke Ageing resistance Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastics PC & PS No toxic or corrosive gases in case of fire Better visibility of escape ways UV stabilized 29

3 Plastic conduit systems with antimicrobial protection 3

Antimicrobial protection Even in the cleanest environments microbial contamination will occur because of factors like air circulation and human contact. Once microbes are present on surfaces there is an undesirable risk for cross contamination. Why use an antimicrobial protected conduit? Antimicrobial protection ensures a reduction of up to 99.9% of the most dangerous bacteria within 2 hours. A reduction in the bacteria can be observed within the first 5 minutes. Where to use it? In sanitary areas such hospitals or laboratories, public gathering places such schools or nursing homes and places where HACCP System ISO 22 is required such as food industries, professional cuisines, restaurants, etc. Antimicrobial efficacy is tested according to international standard ISO 2296 and is controlled by the British laboratory BIOCOTE. 3

3 Plastic conduit systems made with antimicrobial protection Medium (75Nt) MEDISOL AM rigid conduit 334 RAL 93 735 signal light grey white Resistance to compression 75Nt/5cm Resistance to impact 2J (at -25 C) Lower temperature range -25 C Upper temperature range +6 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics IP ingress protection Resistance against corrosion Tensile strength Resistance to flame propagating Suspended load capacity IP 67 (when connected with MEDISOL AM coupler) Not applicable None declared Non flame propagating None declared Class 3 3 4 2 6 7 ANTIMICROBIAL UV RESISTANT 32 Standards & Directives EN 6386.2, ISO 2296, EU 98/8/EC (BPD) Assembled with MEDISOL AM Bend MEDISOL AM Coupler MEDISOL AM Adapter MEDISOL AM Clip Technology Patent protected All product s certificates are available at www.kouvidis.com + Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC Antimicrobial protection Ageing resistance Rodent Repellent Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours UV stabilized Not attractive to rodents Engraved with laser printing and packed with safety straps in red color % recyclable polyethylene film. Ideal for sanitary areas (hospitals, medical centers & laboratories) and public spaces (schools, nursery homes/rooms & sport centers) and areas requiring implementation of HACCP ISO 22 system such as food industries/warehouses, restaurants, etc. Ø6 446 6 3.2 3 2.9 9 Ø2 442 2 6.8 3 3.94 54 Ø25 4425 25 22 3 5.34 36 Ø32 4432 32 28.7 5 3.64 234 Ø4 444 4 36.3 9 3.5 53 Ø5 445 5 45.8 9 3.97 99 Ø63 4463 63 58.4 9 5.77 63 kg (m)

3 Plastic conduit systems made with antimicrobial protection Medium (75Nt) Assembled with MEDISOL AM Bend MEDISOL AM Coupler MEDISOL AM Adapter MEDISOL AM Clip RAL 735 93 signal light grey white Standards & Directives EN 6386.22, ISO 2296, EU 98/8/EC (BPD) Technology Patent protected + MEDIFLEX AM pliable conduit 3342 Resistance to compression 75Nt/5cm Resistance to impact 2J (at -25 C) Lower temperature range -25 C Upper temperature range +6 C Resistance to bending Pliable Electrical characteristics With electrical insulated characteristics IP ingress protection Resistance against corrosion Tensile strength Resistance to flame propagating Suspended load capacity IP 66 (when connected with MEDISOL AM coupler) Not applicable None declared Non flame propagating None declared Class 3 3 4 2 2 6 6 Additional properties Raw material Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC Antimicrobial protection Ageing resistance Rodent Repellent Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours UV stabilized Not attractive to rodents Marked using embossed printing and packed with % recyclable polyethylene film including safety straps and an informative red color label. Ideal for sanitary areas (hospitals, medical centers & laboratories) and public spaces (schools, nursery homes/rooms & sport centers) and areas requiring implementation of HACCP ISO 22 system such as food industries/warehouses, restaurants, etc. kg (m) ANTIMICROBIAL UV RESISTANT Ø6 2446 6.9 5 2.87 38 Ø2 2442 2 4.3 5 3.95 34 Ø25 24425 25 8.6 25 2.74 9 Ø32 24432 32 24.4 25 3.87 4 Ø4 2444 4 3.3 2 4.5 96 Ø5 2445 5 39.3 2 5.27 4 Ø63 24463 63 52. 2 7.2 36 33

3 Plastic conduit systems made with antimicrobial protection Medium (75Nt) MEDISOL AMHF rigid conduit 3444 RAL 93 signal white Resistance to compression 75Nt/5cm Resistance to impact 6J (at -25 C) Lower temperature range -25 C Upper temperature range +2 C Resistance to bending Rigid Electrical characteristics With electrical insulated characteristics IP ingress protection Resistance against corrosion Tensile strength Resistance to flame propagating Suspended load capacity IP 67 (when connected with MEDISOL AM coupler) Not applicable None declared Non flame propagating None declared Class 3 4 4 4 2 6 7 ANTIMICROBIAL UV RESISTANT LSHF 34 Standards & Directives EN 6386.2, ISO 2296, EN 5267-2-2, EU 98/8/EC (BPD) Assembled with MEDISOL AMHF Bend MEDISOL AM Coupler MEDISOL AM Adapter MEDISOL AM Clip Technology Patent protected All product s certificates are available at www.kouvidis.com Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Antimicrobial protection Halogen Free Low smoke Ageing resistance Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours No toxic or corrosive gases in case of fire Better visibility of escape ways UV stabilized + Printed with indelible green color and packed with safety straps in red color % recyclable polyethylene film. Ideal for sanitary areas (hospitals, medical centers & laboratories) and public spaces (schools, nursery homes/rooms & sport centers) and areas requiring implementation of HACCP ISO 22 system such as food industries/warehouses, restaurants, etc. Ø6 446 6 2.8 3 2.8 9 Ø2 442 2 6.6 3 3.2 54 Ø25 4425 25 2.4 3 4.4 36 Ø32 4432 32 27.9 5 2.85 234 Ø4 444 4 35.8 9 2.5 53 Ø5 445 5 45.3 9 3.66 99 Ø63 4463 63 56.9 9 5.4 63 kg (m)

3 Plastic conduit systems made with antimicrobial protection Medium (75Nt) MEDIFLEX AMHF pliable conduit 33442 RAL 93 signal white Resistance to compression 75Nt/5cm Resistance to impact 2J (at -25 C) Lower temperature range -25 C Upper temperature range +2 C Resistance to bending Pliable Electrical characteristics With electrical insulated characteristics IP ingress protection Resistance against corrosion Tensile strength Resistance to flame propagating Suspended load capacity IP 66 (when connected with MEDISOL AM coupler) Not applicable None declared Non flame propagating None declared Class 3 3 4 4 2 2 6 6 ANTIMICROBIAL UV RESISTANT LSHF Standards & Directives EN 6386.22, ISO 2296, EN 5267-2-2, EU 98/8/EC (BPD), ΕΝ 634- Assembled with MEDISOL AMHF Bend MEDISOL AM Coupler MEDISOL AM Adapter MEDISOL AM Clip Technology Patent protected + Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Antimicrobial protection Halogen Free Low smoke Ageing resistance Embossed with its basic properties (marking) and packed with % recyclable polyethylene film including safety straps and an informative red color label. Ideal for sanitary areas (hospitals, medical centers & laboratories) and public spaces and areas requiring implementation of HACCP ISO 22 system such as food industries/warehouses, restaurants, etc. Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours No toxic or corrosive gases in case of fire Better visibility of escape ways UV stabilized kg (m) Ø6 2446 6.8 5 2.4 38 Ø2 2442 2 4 5 3. 34 Ø25 24425 25 8.2 25.9 9 Ø32 24432 32 24. 25 2.9 4 Ø4 2444 4 3.9 2 3. 96 Ø5 2445 5 39.2 2 4. 4 Ø63 24463 63 52 2 5.4 36 35

3 Plastic conduit systems made with antimicrobial protection Medium (75Nt) RAL 93 signal white MEDISOL AM bend Resistance to impact 2J (at -25 C) Temperature range -25 C to +6 C ANTIMICROBIAL Additional properties Raw material Ageing resistance Rodent Repellent Heavy metals free (RoHS), specially stabilized thermoplastic U-PVC UV stabilized Not attractive to rodents UV RESISTANT A R Ø6 43446 6 2.7 27 55 46 Ø2 43442 2 6.2 35 65 42 Ø25 434425 25 2.2 36.7 9 7 Ø32 434432 32 27.5 47.6 25 6 48 Ø4 43444 4 35.4 52.9 3 6 84 Ø5 43445 5 45 62 63 4 36 Ø63 434463 63 57.5 77 9 4 6 All product s certificates are available at www.kouvidis.com 36

3 Plastic conduit systems made with antimicrobial protection Medium (75Nt) RAL 93 signal white MEDISOL AMHF bend Resistance to impact 6J (at -25 C) Temperature range -25 C to +2 C Additional properties Raw material Ageing resistance Halogen Free Low smoke Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC UV stabilized No toxic or corrosive gases in case of fire Better visibility of escape ways ANTIMICROBIAL UV RESISTANT LSHF A R Standards & Directives EN 6386.2, ISO 2296, EN 5267-2-2, EU 98/8/EC (BPD), ΕΝ 634- Ø6 43446 6 3.3 27 55 46 Ø2 43442 2 6.9 35 65 42 Ø25 434425 25 2.9 36.7 9 7 Ø32 434432 32 28.6 47.6 25 6 48 Ø4 43444 4 36.4 52.9 3 6 84 Ø5 43445 5 45.8 62 63 4 36 Ø63 434463 63 58 77 9 4 6 Basic properties for Bends Antimicrobial protection Electrical characteristics Resistance to flame propagating Ingress protection Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours With electrical insulated characteristics Non flame propagating IP67 (when connected to MEDISOL AM couplers) Note: Bends do not contain coupler within their packages. 37

3 Plastic conduit systems made with antimicrobial protection Fittings MEDISOL AM Clips Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Installation guidelines Recommended fastening space is 5cm for vertical and 4 cm for horizontal installations + They can be mounted with the use of 5mm screws and plugs. They have side slots for easy positioning to rails A mm Ø6 4446 5.8 35 4x5 28 Ø2 4442 9.8 4 4x5 2 Ø25 44425 24.8 46 4x3 8 Ø32 44432 3.8 53 3 38 Ø4 4444 39.8 63 2 92 Ø5 4445 49.8 74 2 84 Ø63 44463 62.8 88 2 84 B mm ANTIMICROBIAL UV RESISTANT LSHF Fittings MEDISOL AM Adaptors Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PE Temperature range -25 C to +6 C ANTIMICROBIAL A mm B mm Ø6 4446 3 6 6 2 4x3 8 Ø2 4442 6.5 2 2 2 4X3 2 Ø25 44425 2.5 25 25 33 2 8 Ø32 44432 27.5 32 32 33 2 84 C mm D mm UV RESISTANT LSHF 38

3 Plastic conduit systems made with antimicrobial protection Fittings MEDISOL AM Couplers Raw material Ingress protection Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PE IP67 (when connected to rigid conduits) IP66 (when connected to pliable conduits) ANTIMICROBIAL C mm D mm UV RESISTANT Ø6 42446 6 2 5.5 3 228 Ø2 42442 2 23.5 5.5.5 3 62 Ø25 424425 25 28.5 5.5.5 3 26 Ø32 424432 32 37 65 2 2 48 Ø4 42444 4 44.5 8.4 2 5 36 Ø5 42445 5 55.6.5 2.5 2 Ø63 424463 63 69.8 2 2.8 8 64 LSHF Standards & Directives EN 6386., ISO 2296, EN 5267-2-2, EU 98/8/EC (BPD), EN 634- RAL 93 signal white General properties for Fittings Temperature range Electrical characteristics Resistance to flame propagating Antimicrobial protection Halogen Free Low smoke -25 C to +2 C With electrical insulated characteristics Non flame propagating Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours No toxic or corrosive gases in case of fire Better visibility of escape ways 39

3 Plastic conduit systems made with antimicrobial protection Junction boxes RAL 9 signal white MEDISOL AM Watertight with seals Raw material PC Temperature range -25 C to +6 C Seals Plug in seals Ingress protection IP55 Flame retardant 65 C Condensation opening Yes No of base Knock outs 4 Conduit alignment In each side Voltage 8V ANTIMICROBIAL UV RESISTANT LSHF Standards & Directives EN 667-22, ISO 2296, EN 5267-2-2, EU 98/8/EC (BPD) Additional properties Raw material Antimicrobial protection Halogen Free Low smoke Ageing resistance A mm Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic PC Resist the growth of bacteria by up to 8% in 5 minutes and by up to 99,9% within 2 hours No toxic or corrosive gases in case of fire Better visibility of escape ways UV stabilized B mm Ø6 3446 67 38 2.6 24 Ø2 3442 82 43 2.6 5 Ø25 34425 5 35. 5 C mm All product s certificates are available at www.kouvidis.com 4

ANTIMICROBIAL PROTECTION conduit surface microbe antimicrobial technology The antimicrobial technology is incorporated in the material which MEDISOL AM - MEDIFLEX AM plastic conduit system is mafe of during the manufacturing process to ensure a continuous antimicrobial protection. The active ingredients, contained in the surface of the antimicrobial system of plastic pipes, come in contact with the deposited microbes and after intervening in their cellular structure they acheive to prevent their reproduction succeding to reduce them. % of living bacteria 5 min 3 min 45 min hour time 2 hours Moreover, the neutralization time of microbes is 2 hours from which the first 5 minutes can be observed a significant reduction of pathogenic bacteria compared to an unprotected surface whereas a microbe can be proliferated and replicated endangering generating infections. 4

4 Plastic conduit systems buried underground 42

Double wall technology Two different walls, one corrugated outside and one smooth inside, welded together during production process through co-extrusion technology combing the properties of a pliable and a rigid conduit at the same time. Pioneer products double structured wall conduits N75 (GEONFLEX) achieve the maximum mechanical strength that the Standard for buried underground networks EN 6386-24 defines, a fact that make them unique in the market. Innovative properties The low friction material and the ecological rodent repellent that are incorporated at the internal wall of double structured wall conduits make the installation easier and safer. is the first purely Greek company engaged in the manufacture of double wall conduits for underground power and telecommunication networks. 43

4 Plastic conduit systems buried underground (75Nt) RAL 735 Light grey GEONFLEX in 6m bars Resistance to compression Resistance to impact Lower temperature range Upper temperature range Resistance to bending Electrical characteristics IP ingress protection Resistance to flame propagating Friction reduction 75N Normal -5 C +9 C Rigid With electrical insulated characteristics IP44 (coupler connected) IP 68 (coupler bonded with sealant) Flame propagating Up to 5% reduction in friction Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic HDPE Ageing resistance UV stabilized ( 5 years) Rodent Repellent Not attractive to rodents (the internal layer incorporates animal repellent) Standards EN 6386-24 Assembled with Connection coupler with hooks End caps + Double structured wall conduits, corrugated outside and smooth inside, printed with their basic properties and affixed with an informative waterproof indelible green label. Ideal for buried underground power and telecommunication networks, urban development projects, RES urban development projects and construction projects. kg (m) All product s certificates are available at www.kouvidis.com Ø75 675 75 59 6 2.9 8 Ø9 69 9 73.5 6 3.6 692 Ø 6 9 6 5. 48 Ø25 625 25 3.5 6 5.3 372 Ø6 66 6 2 6 8.3 252 Ø2 62 2 5 6 9.7 44 Ø25 625 25 88 6 6.7 864 44

4 Plastic conduit systems buried underground (75Nt) RAL 735 Light grey GEONFLEX in coils Resistance to compression Resistance to impact Lower temperature range Upper temperature range Resistance to bending Electrical characteristics IP ingress protection Resistance to flame propagating Friction reduction Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic HDPE Ageing resistance UV stabilized ( 5 years) Rodent Repellent 75N Normal -5 C +9 C Pliable With electrical insulated characteristics IP44 (coupler connected) IP 68 (coupler bonded with sealant) Flame propagating Up to 5% reduction in friction Not attractive to rodents (the internal layer incorporates animal repellent) Standards EN 6386-24 Assembled with Connection coupler with hooks End caps + Internal guide Packing Cable guide with minimum tensile strength 65Nt Come with cable guide and protective caps at each conduit s edges Double structured wall conduits, corrugated outside and smooth inside, printed with their basic properties, packed with special safety UV resistant straps and affixed with an informative waterproof indelible green label. Ideal for buried underground power and telecommunication networks, urban development projects, RES urban development projects and construction projects. 25m / 5m (m) kg (25/5m) 25/5m (m) In 5m coil packaging and internal safety strap is placed on the 25th meter to keep the initial shape of the coil unchanged when its external straps are snipped off. Ø4 2624/2634 4 3.5.2 25m/5m 3.8/7.68 2625/35 Ø5 2625/2635 5 38.5.25 25m/5m 4.5/8.84 625/2 Ø63 26263/26363 63 5.32 25m/5m 6.7/4. 5/4 Ø75 2627526375 75 6.38 25m/5m 9./8. 625/775 Ø9 2629/2639 9 74.5.45 25m/5m 4.7/29.3 6/7 Ø 262/263 92.55 25m/5m 7.5/34. 3875/45 Ø25 26225/26325 25 4.5.63 25m/5m 2.7/4.6 325/35 Ø6 2626/ - 6 2.5.8 25m 32.8 75 Ø2 2622/ - 2 69 25m 38.96 225 45

4 Plastics conduit systems buried underground (45Nt) RAL 94 Black GEOSUB in 6m bars Resistance to compression Resistance to impact Lower temperature range Upper temperature range Resistance to bending Electrical characteristics IP ingress protection 45N Normal -5 C +9 C Rigid With electrical insulated characteristics IP4 (coupler connected) IP 68 (coupler bonded with sealant) Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic HDPE Ageing resistance UV stabilized ( 2 years) Standards EN 6386-24 Assembled with Connection coupler with hooks End caps + Double structured wall conduits, corrugated outside and smooth inside, printed with their basic properties and affixed with an informative waterproof indelible mauve label. Ideal for buried underground power and telecommunication networks, urban development projects, urban development and construction projects. kg (m) All product s certificates are available at www.kouvidis.com Ø75 6775 75 56 6.95 8 Ø9 679 9 67 6 2.75 692 Ø 67 82 6 3.45 48 Ø25 6725 25 94 6 4.45 372 Ø6 676 6 2 6 6.3 252 Ø2 672 2 5 6 7.65 44 Ø25 6725 25 88 6.8 864 46

4 Plastic conduit systems buried underground (45Nt) RAL 94 Black GEOSUB in coils Resistance to compression Resistance to impact Lower temperature range Upper temperature range Resistance to bending Electrical characteristics IP ingress protection Resistance to flame propagating 45N Light -5 C +9 C Pliable With electrical insulated characteristics IP4 (coupler connected) IP 68 (coupler bonded with sealant) Flame propagating Additional properties Raw material Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic HDPE Ageing resistance UV stabilized ( 2 years) Internal guide Packing Cable guide with minimum tensile strength 65Nt Come with cable guide, a protection cap at the one edge and connection coupler at the other Standards EN 6386-24 Assembled with Connection coupler with hooks End caps + Double structured wall conduits, corrugated outside and smooth inside, printed with their basic properties, packed with special safety straps and affixed with an informative waterproof indelible mauve label. Ideal for buried underground power and telecommunication networks, urban development projects, urban development and construction projects. (m) kg (m) In 5m coil packs and internal safety strap is placed on the 25th meter to keep the initial shape of the coil unchanged when its external straps are snipped off. Ø4 2674 4 3.5.6 5 5.35 35 Ø5 2675 5 38.5.2 5 6.99 2 Ø63 26763 63 5.25 5.6 4 Ø75 26775 75 6.3 5 3. Ø9 2679 9 74.5.36 5 2.5 7 Ø 267 92.44 5 26.9 45 Ø25 26725 25 4.5.5 5 3.57 35 Ø6 2676 6 2.5.64 25 25.2 75 Ø2 2672 2 69.8 25 32.4 225 47

4 Plastics conduit systems buried underground Fittings RAL 94 black Connection couplers with hooks Raw material Temperature range IP ingress protection Ageing resistance Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic HDPE -5 C to +9 C IP 4 (coupler connected to GEOSUB conduit) IP 44 (coupler connected to GEONFLEX conduit) IP 68 (coupler bonded with sealant) UV stabilized (pcs) 48 Standards EN 6386-24 Packaging parts All product s certificates are available at www.kouvidis.com RAL 94 black + They carry three perimetric internal double hooks on each side and an inner lip for the proper conduits fixing and assembling. End caps Raw material Ageing resistance + Ideal for the protection of the internal side of conduits. Caps offered with a ventilation hole. Ø4 64 2 54 Ø5 65 2 8 Ø63 663 5 35 Ø75 675 5 5 Ø9 69 Ø 6 5 5 Ø25 625 5 5 Ø6 66 2 2 Ø2 62 3 3 Halogen free, heavy metals free (RoHS) and specially stabilized thermoplastic HDPE UV stabilized (pcs) Ø4 64 3 62 Ø5 65 3 72 Ø63 663 3 5 Ø75 675 5 2 Ø9 69 5 2 Ø 6 8 8 Ø25 625 8 64 Ø6 66 6 6 Ø2 62 6 6

4 Plastics conduit systems buried underground Required materials Adhesive & Sealant Consistency Cured 2mm after Toxic Solubility in water Skin over time Expansion Color Working temperature Shelf conditions Paste 8 hours No Insoluble Approx. minutes No White +5 C to +4 C 2-8 months + Capable to provide IP68 ingress protection. Free of silicone, isocyanides, solvents and halogens. 64 6x3ml - Required materials Lubricant for plastic pipes and fittings Consistency Paste Solubility in water Insoluble Color White Working temperature +5 C to +4 C Ph Value 8.5-9.5 Shelf conditions +5 C to +25 C + Based on synthetic raw materials, is water miscible and fulfills the current requirements of the German DVGW institute after the basis of type examination VP64. 65 5kg - 49

5 Plastic conduit systems for concealed installations 5

Junction boxes, together with light type conduits, were the first products produced 37 years ago. They have been installed in thousands of buildings and constructions and they still gain installer s respect because of their easy assembling, flexibility and reliability in electrical installations. 5 ELECTRONION Electrical installations

5 Plastic conduit systems for concealed installations Junction boxes RAL 59 blue MULTIBOX Lower temperature range Upper temperature range Resistance to heat Electrical characteristics IP ingress protection Resistance to flame propagating -5 C +6 C 65 C With electrical insulated characteristics IP3 Non flame propagating Additional Raw material Conduit entries Heavy metals free (RoHS), specially stabilized thermoplastic HIPS (base and separator) and PP (cover plate) All side walls (2 at the base) + Ideal for flush mounting and cavity wall installations. It can be extended to all directions (horizontal, vertical, diagonal). All sides consist of small 5x5mm removable square knock outs permitting the entry of cable or conduits of different dimensions up to Ø35 while special separators can define different electrical circuits. (pcs) Standards EN 667-22 Patent No: 6882 Hellenic Industrial Property Organization x6 324 36 - x3 325 8 - x2 326 2 - Cover Plate 32 36 - Seperators 322 36 - All product s certificates are available at www.kouvidis.com 52

5 Plastic conduit systems for concealed installations Junction boxes RAL 59 blue ASSEMBLED ROUND Ø73 Lower temperature range -5 C Upper temperature range +6 C Resistance to heat 65 C Electrical characteristics With electrical insulated characteristics IP ingress protection IP2X Resistance to flame propagating Non flame propagating Ø8 Additional 32 Ø73 2 Raw material Conduit entries Heavy metals free (RoHS), specially stabilized thermoplastic HIPS (base) and PP (cover plate) 8 up to Ø2 2 + Ideal for flush mounting and cavity wall installations. Junction boxes can be assembled lengthwise. (pcs) Standards EN 667-22 Junction Box 3 - Cover Plate 3-53

5 Plastic conduit systems for concealed installations Junction boxes RAL 59 blue SQUARE 7,5 x 7,5 Lower temperature range Upper temperature range Resistance to heat Electrical characteristics IP ingress protection Resistance to flame propagating -5 C +6 C 65 C With electrical insulated characteristics IP2X Non flame propagating 88 Additional 26,4 26,4 26,4 2,5 75 35 Raw material Conduit entries Heavy metals free (RoHS), specially stabilized thermoplastic HIPS (base) and PP (cover plate) 6 up to Ø25, 2 up to Ø2 + Ideal for flush mounting and cavity wall installations. (pcs) Standards EN 667-22 Junction Box 32 5 - Cover Plate 32 5-54

5 Plastic conduit systems for concealed installations Switch boxes RAL 59 blue MULTI COMBINATION GANG Lower temperature range -5 C Upper temperature range +6 C Resistance to heat 65 C Electrical characteristics With electrical insulated characteristics IP ingress protection IP2X Resistance to flame propagating Non flame propagating 6 42 6 Additional Raw material Heavy metals free (RoHS), specially stabilized thermoplastic PP 22 Conduit entries 7 up to Ø8 ( of them at the base up to Ø22) No of screws dome 2 of 5mm screw length + Ideal for flush mounting installations. Designed with serrated inner surface, to ensure perfect mechanism mounting. The special spouts allow faultless boxes alignment and the 4mm depth creates the right installation space for switches with dimmer. Standardized combination distance 7mm which can be extended to 9 with the use of distance adaptors. Standards EN 667-22 (pcs) Patent No: 6882 Hellenic Industrial Property Organization Multi Combination Gang 32 - Distance Adaptor 322 5 27 55

info Technical information 56

58 Signs Explanation 59 Color Identity 6 Product Labels 6 European Legislation 62 European Norms 63 Ingress Protection 64 Classification Code (acc. to EN 6386.) 66 Classification Code (acc. to EN 6386-24) 67 Installation Guide 68 Raw Materials guide 69 Chemical Resistance 7 Application Field 72 Product Index 73 Symbols 74 Contact Us 57

SIGNS EXPLANATION All the below mentioned signs can be found on packagings, labels or on the company s technical documentation. Product Conformity to all requirements of relative European Directives. Non flame propagating product The product and its production process are inspected and approved by VDE German institute >25 Nt Minimum compression strength Certification body of Quality Management System EN ISO 9 >6 Minimum impact strength Certification body of Environmental Management System EN ISO 4 Certification body of Occupational Health and Safety Management System OHSAS 8 IP 55/65 Product with extra UV stability Ingress protection against solid objects and water (EN 6529) The product does not contain hazardous substances acc. to 2/65/ΕΕ RoHS Directive. Certification body VDE Compliance with REACH Regulation EC/97/26 about chemicals 5 Electrical insulation strength Friction reduction at the internal wall of double walls conduits BIODICAL Compliant EFQM business excellence certification (European Foundation of quality management) Compliance with Biocidal Products Directive 98/8/EC (BPD) concerning the placing of biocidal products on the market Product with extra UV stability Product is not an attractive food to rodents Low smoke during combustion (EN 634-2) Product is made of halogen free raw materials absence of fluorine, iodine, bromine, chlorine, etc (EN 5267-2-2) UV RESISTANT Low Smoke and halogen free product 99,9% A N T I MICROBIAL Antimicrobial product that inhibits by up to 99.9% the growth of harmful bacteria. LSHF ANTIMICROBIAL -25 ο C +2 o C Product with up to 99,9% antimicrobial protection Min-max permanent application temperature Product Certificate for its antimicrobial effectiveness from the BIOCOTE British Institute (ISO 2296) Environmentally friendly product. Halogen free, heavy metals free (RoHS), low smoke, SVHC-free (REACH) with % eco-friendly packaging 58

PRODUCT LABEL EXPLANATION All products have distinctive labelling on their packaging and are easily traceable. The color of the label indicates the type of the product while the information mentioned refer to its characteristics and mechanical strengths. MEDISOL HF OUTSIDE DIAMETER INSIDE DIAMETER E.U. DIRECTIVES 2. mm 6.6 mm CLASS 3344267 STANDARDS EN 6386.2 up to V AC 5 V DC EN 6386.2 >75 N/5cm -25 C >2 joule +2 IP 67 C EN 6386.2 EN 6386.2 EN 6386.2 EN 6529 HALOGEN LOW FREE SMOKE EN 6386.2 EN 5267.2.2 EN 634. CODE: 5342 58E 5 2565 8556 Label found on conduit bundles or coils MEDISOL AM ANTIMICROBIAL MEDISOL AM ANTIMICROBIAL 32 CODE: 44432 32 29 Label affixed on fittings packaging Label affixed on double wall conduits (double side label) 59

COLOR IDENTITY (LABEL COLOR EXPLANATION) has developed a very helpful color identity for each product family in order to facilitate installer and retailer work. The color identity provides easiness when identifying, storing and distributing while it secures recognition and uniformity of each product family. Conduit systems MAIN CATEGORY made from PVC premium series made from PVC ST series made from halogen free materials with antimicrobial protection LIGHT TYPE MEDIUM TYPE HEAVY TYPE Double wall conduit systems MAIN CATEGORY made for buried underground networks 6

EUROPEAN LEGISLATION All Product s declarations for the below mentioned Directives are available at www.kouvidis.gr Low Voltage Directive 24/35/EU (LVD) supersedes 26/95/EC LVD is applied to electrical equipment designed for the use with a voltage rating of between 5 to V for AC and between 75 and 5 V for DC. Electrical equipment may be placed on the market under the conditions that it has been manufactured in accordance with the safety LVD objectives, that it does not endanger the safety of persons, domestic animals or property when properly installed, maintained and used in applications for which it was made. Electrical products are presumed to conform to the safety LVD objectives when manufactured in compliance with Harmonized Standards or with the safety provisions of Electrical Equipment Commission or International Electrotechnical Commission. In order to be placed on the EU market, an established Technical Documentation and a Declaration of Conformity must be drawn up and they should be affixed with the CE Marking. When electrical equipment is subject to other Directives, apart from LVD, which also provide CE Marking, then the CE label indicates the Conformity to the requirements of those Directives. The new LVD directive keeps the same scope and safety objectives. was the first Greek company to have had all of its products affixed with the CE marking in the Greek market at the early 99 s. Restriction of Hazardous Substances Directive 2/65/EU (RoHS) The RoHS Directive (22/95/EC) for the restriction of the use of certain hazardous substances in electrical and electronic equipment (commonly referred as Restriction of Hazardous Substances or RoHS) was adopted in February 23, by the European Union and was implemented in a legislation form, on the st July 26 by all Member States. RoHS 2 Directive was published on July 2 in order to increase the e-waste amount that is appropriately treated, to reduce the volume that goes to disposal and to reduce the administrative burdens ensuring coherency with newer policies and legislation. The main aspect of RoHS Directive is to prohibit manufactures and distributors of the Member States to produce or sell products/fittings containing any of the following six banned substances: Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr (VI)), Polybrominated biphenyls (PBB), Polybrominated diphenlys ether (PBDE). The above mentioned substances should not be used or contained beyond the specific allowed limits which are defined by the Directive. has adopted RoHS Directive since 26 by using heavy metals free raw materials in all of its products. REACH Regulation EC/97/26 REACH Regulation EC/97/26 concerns the Registration, Evaluation, Authorisation and Restriction of chemical substances. It has been valid since 2 June of 27 and basically it improves and simplifies the past European legislation in chemicals. It concerns all chemicals and aims to ensure a high level of protection of human health and environment from the risks that can be posed by chemicals. This Regulation also promotes the development of alternative test methods for the assessment of hazards posed by chemical substances. Chemical manufacturers and importers should identify and manage accordingly the hazards of the produced and traded in the market chemical substances., being fully compliant with REACH regulation since 2, designs and manufactures products for electrical applications, which, when used within their specification, shall not release any harmful substances. Directive 98/8/EC (BPC) The Biocidal Products Directive was first published in 998 and entered in force on 4 May 2 aiming to harmonize the European market for biocidal products and their active substances, to provide a high level of protection for people, animals and environment through risk assessment, and to ensure that products are sufficiently effective against the target species. Biocidal products are any chemical substances intended to control unwanted, render harmless, and prevent the action of any harmful organism such as insects, bacteria, virus and fungi. The directive is applicable to 23 different product types relevant to the footwear and leather industries and human hygiene covering fiber, leather, rubber, and polymerized materials. The BPD can be seen as a precursor to the REACH legislation, as this followed a similar pattern of identification, assessment and authorization. antimicrobial conduit system MEDISOL AM - MEDIFLEX AM is fully compliant with the BPD Directive. 6

EUROPEAN NORMS EN 6386. The Standard specifies the general requirements and tests for Conduit Systems, including conduits and conduit fittings, for the protection and management of insulated conductors and/ or cables in electrical installations or in communication systems up to V AC and/or 5V DC. This Standard applies to metallic, non-metallic, and composite Conduit Systems, including threaded and non-threaded entries which terminate the system. This Standard does not apply to Enclosures and Connecting Boxes which come within the scope of EN 667. EN 6386.2 Part 2- specifies the requirements for Rigid Conduit Systems. Rigid Conduits cannot be bent or bent only with the use of mechanical aids, with or with-out special treatment. EN 6386.22 Part 2-2 specifies the requirements for Pliable Conduit Systems. Pliable Conduits can be bent by hand with reasonable force, but are not intended for frequent flexing. EN 6386-24 This standard specifies requirements and tests for conduit systems buried underground including conduits and conduit fittings for the protection and management of insulated conductors and/or cables in electrical installations or in communication systems. EN 667 - This part of IEC 667 Standard applies to Boxes, Enclosures and parts of enclosures for electrical accessories with a rated voltage not exceeding V AC and 5 V DC intended for household or similar fixed electrical installations, either indoors or outdoors. EN 667-22 This Part specifies the particular requirements for connecting boxes, for junction(s) and tapping(s). EN 634- Measurement of smoke density of cables burning under defined conditions. The standard contains test procedures and requirements. Smoke density test is combustion of an important aspect of performance evaluation, as it relates to the degree of difficulty for personnel evacuation. ISO 2296 ISO 2296 test method is used to evaluate the antibacterial activity of antibacterial plastic surfaces inhibiting or killing the growth of test microorganisms. The Standard describes the test procedure for Staphylococcus aureus and E.coli microorganisms. Additional pathogen bacteria like, Salmonella, Listeria monokytogenes, Pseudomonas aeruginosa, Klebsiella Pneumoniae, Lactobacilli, Streptococcus pyogenes and Legionella can also be tested by this method. EN 5267-2-2 Part 2-2 of the General Standard EN 5267 specifies the test methods and procedure for the determination of the degree of acidity of gases evolved during the combustion of materials taken from electric or optical cables by measuring the ph and conductivity. 62

DEGREES OF PROTECTION (IP CODE) According to EN 6529 The IP international protection code consists of two digits (e.g. IP67). The first digit stands for resistance to ingress of solid objects and dust, denominated from to 6. The second digit stands for resistance against ingress of water and is denominated from to 8. The IP international protection index digits are shown in the following table: st Digit Protection against ingress of solid objects IP 6 7 2 st Digit Protection against ingress of water IP X Non protected Non protected IP X IP X Protected against solid foreign objects of 5mm and greater (e.g. accidental touch by hands) Protected against vertically falling drops of water IP X IP 2X Protected against solid foreign objects of 2.5mm and greater (e.g. contact with finger) Protected against direct sprays of water up to 5 from vertical IP X2 IP 3X Protected against solid foreign objects over 2.5mm (e.g. tools, cables) Protected against direct sprays of water up to 6 from vertical IP X3 IP 4X Protected against solid foreign objects over.mm (e.g. thin tools, small wires) Protected against water splashing from all directions IP X4 IP 5X Protected against dust (permeable only to visible particles) Protected against low pressure jets of water from all directions IP X5 IP 6X Dust - tight Protected against powerful pressure jets of water from all directions IP X6 Protected against the effect of immersion in water between 5cm and m IP X7 Protected against long periods of immersion in water IP X8 63

CLASSIFICATION CODE FOR CONDUIT SYSTEMS BURIED UNDERGROUND According to EN 6386-24 The classification code for buried underground conduits is made of 2 elements according to EN 6386-24 and determines the conduit s main properties. The first element is the letter "L" or "N" which classifies the conduit according to its impact resistance whereas the second one is a three digid number 25 or 45 or 75 which classifies it according to its compression resistance. Classification code is demonstrated on the table below: Resistance to impact Light Duty (L) Normal Duty (N) Ø6 (3Kg/mm 3J) Ø6 (5Kg/3mm - 5J) Ø9 (3Kg/2mm 6J) Ø9 (5Kg/4mm 2J) Ø4 (3Kg/4mm 2J) Ø4 (5Kg/57mm 28J) >Ø4 (3Kg/5mm 5J) >Ø4 (5Kg/8mm - 4J) Example of GEONFLEX Ø9 conduit N 75 Resistance to compression 25 25Nt 45 45Nt 75 75Nt 66

INSTALLATION GUIDE Below you can find the installation guidelines in order ensure an appropriate structure of your conduit systems. Exposed Installations conduit terminal point coupler Coupler Clips Bend seal conduit terminal point 82 x 82 x38 IP65 Clips Junction box Adaptor Buried Underground Installations (acc. to EN 6) Description of filling trench zones 2 3 4 5 6 7 8. Main backfill 2. Initial backfill 3. Sidefill 4. Upper bedding 5. Lower bedding 6. Depth of bedding 7. Depth of embedment 8. Trench depth 9. Trench width. Bottom of road construction, if any 9 Minimum recommended width of trench in relation to outside diameter of conduit Nominal Diameter (DN) Minimum trench width (ΟD + Χm) 225 OD +,4 OD: Outside diameter More about trench dimensions, trench materials, installation, storage, laying, connection, trenching and inspection of buried underground conduit systems can be found on GEONFLEX technical manual at www.kouvidis.gr Minimum recommended width of trench in relation to trench depth Trench Depth (m) Minimum trench width (m) < No minimum width required.75.8 >.75 4..9 > 4.. Conduits with outside diameter OD up to 2 mm 67

CLASSIFICATION CODE FOR CONDUIT SYSTEMS According to EN 6386. The classification code is made of 2 digits, according to EN 6386., and determines conduits main properties. The first 5 digits are the most usually displayed at marking and classify conduits according their compression resistance, impact resistance, minimum and maximum operating temperature and bending resistance. Classification code is demonstrated on the below table: Digits Class 2 3 Resistance to compression None declared Very light (25Nt) Light (32Nt) Medium (75Nt) 2 Resistance to impact None declared Very light (.5 kg/ mm - 5J) Light (. kg/ mm - J) Medium (2. kg/ mm - 2J) 3 Lower temperature range None declared +5 C -5 C -5 C 4 Upper temperature range None declared +6 C +9 C +5 C 5 Resistance to bending Rigid Pliable Pliable/Self recovering 6 Electrical characteristics None declared With electrical continuity characteristics With electrical insulating characteristics With electrical continuity and insulating characteristics 7 Protection against ingress of solid objects Solid foreign objects over 2.5mm (e.g. tools, cables) 8 Protection against ingress of water None declared Vertically falling water drops Direct sprays of water up to 5 from vertical Direct sprays of water up to 6 from vertical 9 Resistance against corrosion Not applicable Low protection inside and outside Medium protection inside and outside Medium protection inside, high protection outside Tensile strength None declared Very light Light Medium Resistance to flame propagation Non flame propagating Flame propagating 2 Suspended load capacity None declared Very light Light Medium 64

4 5 6 7 Product example CONDUR rigid conduit (pg 6) Heavy (25Nt) Very heavy (4Nt) 4 Heavy (2. kg/3 mm - 6J) Very heavy (6.8 kg/3 mm - 2.4J) 4-25 C -45 C 4 +2 C +5 C +25 C +4 C Flexible 2 Solid foreign objects over.mm (e.g. thin tools, small wires) Dust (permeable only to visible particles) Dust - tight 6 Water splashing from all directions Low pressure jets of water from all directions Powerful pressure jets of water from all directions Immersion in water between 5cm and m 7 High protection inside and outside Heavy Very Heavy Heavy 65

RAW MATERIALS GUIDE The information contained below is typical values intended for reference and comparison purposes only. They should not be used as a basis for design specifications or quality control. PVC PP HDPE HIPS PC PC/ABS Temperature - 25-3 - - -4 - Resistance ( C) +7 +35 +2 - +4 - Impact 2. - 45 3. - 3. -. - 2. 6-8 55 Resistance (Kj/m²) Kj/m² Kj/m² Kj/m² Kj/m² Kj/m² Flammability UL 94 Water Absorption (%) - 24 hours V V2 HB HB V-V2 HB.85mm.6.8..2.5.25 Free of Halogen No Yes Yes Yes Yes Yes PVC PP HDPE HIPS PC Compatibility with many different kinds of additives - PVC can be clear or colored, rigid or flexible, formulation of the compound is the key to PVC s added value. Rigid, opaque, good dimensional stability at high temperature and humidity conditions, difficult to process (blended to ease injection molding), tough. Flexible, translucent / waxy, weatherproof, good low temperature toughness, easy to process by most methods, low cost, good chemical resistance. Hard, rigid, brittle, low shrinkage translucent, impact strength up to 7 x PS, easy to process. Polycarbonates are strong, stiff, hard, tough, transparent engineering thermoplastics that can maintain rigidity up to 4 C and toughness down to -2 C or special grades even lower. 68

CHEMICAL RESISTANCE Table below is an informational guide only with general chemical characteristics of the raw materials used in products and it should not be considered as a substitute for testing under your specific conditions. PP HDPE PVC PC PS 25 C 6 C 25 C 6 C 25 C 6 C 25 C 6 C 25 C 6 C Acetaldehyde - - - - - Acetic Acid - Acetone - - - - - - Acetyl Chloride - - - - - - - - - - Ammonium Chloride Ammonium Hydroxide - - Aniline - - - - - - Benzene º - - - - - - Benzoic Acid - - Boric acid (%) Bromine Gas - - º - º º º - - - Bromine Water - - º - º º - - - Butyl Alcohol º Calcium Hydroxide - - Carbon Disulphide - - - - - - - - - - Carbon Tetrachloride º - º º º - º - - - Chlorine Water º º - - º º - - Chlorinated Gas - - º - - - - - Citric Acid Cyclohexanol º - - º - - Diethylene Glycol º - º Diethyl Ether - º - º - - - - Dioxin º - - - - - - Diesel Oil - º - Ethylene Chloride º - - - - - - - - - Ethylene Oxide GAS º º º º - - º - N N Fluorine GAS - - - - - - º º N N Formic Acid º - - º - Glycerin Hydrochloric Acid (3%) - - º Hydrofluoric Acid (25%) - - - - Hydrogen Hexane º - - º - - - Methyl Alcohol º º º Mineral oil º Nitric Acid (<25%) º º Oxalic Acid º - Petroleum º º º - - Phosphoric Acid (5%) Seawater - Sodium Chloride - - Sulfuric Acid (<%) º Sulfuric Acid (<9%) º º º º - - - - - - Toluene º - º - - - - - - - Vegetable Oil º Xylene º º º º - - - - - - º - N 69

APPLICATION FIELD Classification (acc. to EN 6386- & EN 6386-24) Material Resistance to flame propagation Halogen free Antimicrobial Color Specifications Compression strength (Nt) Impact strength (J) Minimum temperature ( o C) Max temperature ( o C) Resistance to bending Installations Exposed Concealed (hollow walls) Concealed (underplaster) Wood Underfloor (screed) Concrete Outdoor Buried underground Application fields Industrial buildings Public buildings Sanitary areas Renewable energy systems Infrastructure projects CONDUR CONFLEX MEDISOL MEDIFLEX MEDISOL ST MEDIFLEX ST SILCOR SIFLEX SILCOR ST SIFLEX ST 444 4442 334 3342 332 3322 234 2242 222 2222 U-PVC U-PVC U-PVC U-PVC U-PVC U-PVC U-PVC U-PVC U-PVC U-PVC Non flame propagating Light grey Light grey Light grey Light grey Light grey Light grey Light grey Light grey Light grey Light grey 25 25 75 75 75 75 32 32 32 32 6 6 2 2 2 2 2-25 -25-25 -25-5 -5-25 -25-5 -5 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 Rigid Pliable Rigid Pliable Rigid Pliable Rigid Pliable Rigid Pliable Page 6 7 8 9 2 3 4 5 Industrial building: airports, tunnels, subways, process lines, labs, warehouses, manufacturing applications, engine rooms, computer rooms, etc. Public buildings: Shopping centres, theater, museums, cinemas, hotels, residential block buildings, etc. Sanitary areas: hospitals, clinics, laboratories, spaces requiring implementation of the HACCP system, schools, nurseries, sports centres, care homes, etc. Renewable energy systems: photovoltaic and wind parks, electric power stations, etc Infrastucture projects: motorways, road networks, bridges, tunnels, pedestrianization, shaping of public spaces, rehabilitation of historic centers,etc. 7

2 3 4 CONDUR HF CONFLEX HF MEDISOL HF MEDIFLEX HF MEDISOL AM MEDIFLEX AM MEDISOL AM HF MEDIFLEX AM HF GEONFLEX bar GEONFLEX GEOSUB bar GEOSUB 4442 44422 3444 33442 334 3342 3444 33442 N75 N75 N45 L45 PC PC PC PC U-PVC U-PVC PC PC HDPE HDPE HDPE HDPE Flame propagating Light grey Light grey Light grey Light grey Signal White Signal White Signal White Signal White Light grey/ Black Light grey/ Black Black/Red Black/Red 25 25 75 75 75 75 75 75 75 75 45 45 6 6 6 2 2 2 6 2 Normal Normal Light Light -25-25 -25-25 -25-25 -25-25 -5-5 -5-5 +9 +9 +2 +2 +6 +6 +2 +2 +9 +9 +9 +9 Rigid Pliable Rigid Pliable Rigid Pliable Rigid Pliable Rigid Pliable Rigid Pliable 2 2 22 23 32 33 34 35 44 45 46 47 Recommended Solution Not recommended Solution Best choice acc. to the manufacturer The above applications are only recommendations due to the technical specifications of products. National or local restrictions and prohibitions must always be considered. 7

PRODUCT INDEX Product name Part No Page Product name Part No Page CONDUR 25XX 6 CONDUR adaptor 425XXX 26 CONDUR bend 4325XX 6 CONDUR clip 425XX 26 CONDUR coupler 4225XX 27 CONDUR junction box 32XXX 28 CONDUR HF 525XX 2 CONDUR HF bend 4525XX 24 CONDUR HF junction box 324XX 28 CONNECTION COUPLER 6XXX 48 CONFLEX 225XX 7 CONFLEX HF 2525XX 2 END CAP 6XXX 48 GEONFLEX bar 6XXX 44 GEONFLEX 25m 262XXX 45 GEONFLEX 5m 263XXX 45 GEOSUB bar 67XXX 46 GEOSUB 25m 267XXX 47 GEOSUB 5m 267XXX 47 ADHESIVE 64 49 LUBRICANT 65 49 MEDIFLEX 234XX 9 MEDIFLEX AM 244XX 33 MEDIFLEX AMHF 244XX 35 MEDIFLEX HF 2534XX 23 MEDIFLEX ST 234XX MEDISOL 34XX 8 MEDISOL adaptor 434XX 26 MEDISOL bend 4334XX 6 MEDISOL clip 434XX 26 MEDISOL coupler 4234XX 27 MEDISOL junction box 334XX 28 MEDISOL AM 44XX 32 MEDISOL AM adaptor 444XX 38 MEDISOL AM bend 4344XX 36 MEDISOL AM coupler 4244XX 39 MEDISOL AM clip 444XX 38 MEDISOL AM junction box 344XX 4 MEDISOL AMHF 44XX 34 MEDISOL AMHF bend 4344XX 37 MEDISOL HF 534XX 22 MEDISOL HF bend 4534XX 24 MEDISOL ST 34XX MULTIBOX 32X 52 MULTI GANG switch box 32 55 ROUND junction box 3 54 SIFLEX 25XX 3 SIFLEX ST 25XX 5 SILCOR 5XX 2 SILCOR bend 435XX 7 SILCOR junction box 35XX 29 SILCOR ST 5XX 4 SQUARE junction box 32 53 72

SYMBOLS Product s reference number (m) Bending radius Nominal outer diameter kg Bundle weight (kg) Minimum internal diameter (m) Coils of pliable conduits on pallet (m) Packaging (m/coil) (m) Bundles of rigid conduits (m) Packaging (m/bundle) Bigger packaging for fittings (pieces) kg Packaging (pieces/box) Coil weight (kg) (m) A mm Double wall conduits loaded on a truck (m) Dimensions (mm) 73

CONTACT US FACILITIES Greece EMM. SA VIOPA Tylissos 75, Heraklion Crete info@kouvidis.gr EMM. SA Lofos Kyrillou, 93 Attiki Odos, Aspropyrgos Interchange, Exit 4 EMM. SA 2 km National Road Thessaloniki - Katerini, 574, Sindos Cyprus EMM. (CYPRUS) LTD 2, Kykladon Str, Latsia Industrial zone, Nicosia 2234 T: +357 22 34377, F: +357 22 3437 info@kouvidis.com.cy SERVICES Exports Sales For global presence contact us at: T:+3 28 83 5, export@kouvidis.gr Support For technical manuals/brochures or documentation related to products contact us at: T:+3 28 83 5 info@kouvidis.gr MEDISOL AM MEDIFLEX AM CONDUR HF CONFLEX HF OUR CITY GEOSUB CERTIFICATIONS 74