concentration of acid in mol / dm 3 temperature / C ti / min

Similar documents
METALS

*20GSD5201* Double Award Science: Chemistry. Unit C2 Higher Tier TUESDAY 9 JUNE 2015, AFTERNOON [GSD52] *GSD52* *G5802* TIME 1 hour 15 minutes.

F321: Atoms, Bonds and Groups Group 2

5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS

2015 O LEVEL CHEMISTRY 5073/02

(a) To find out which is the more reactive metal, zinc or tin, the following experiment could be carried out. piece of zinc shiny surface

Novel Ironmaking Technology with Low Energy Requirement and CO 2 Emission


NCEA Level 1 Chemistry (90933) 2012 page 1 of 5. Q Evidence Achievement Achievement with Merit Achievement with Excellence NØ N1 N2 A3 A4 M5 M6 E7 E8

Properties A Metal B Non- metal Electronic configuration?? Nature of oxides?? Oxidizing or reducing action?? Conduction of heat and electricity??

Waste Acid Recycling Technology by Slag

(3) The compound boron nitride (BN) has a high melting point (2967 ºC), high density, and is very hard. What is the best classification of this solid?

Iron filings (Fe) 56g IRON + SULPHUR IRON SULPHIDE

Effect of CO Gas Concentration on Reduction Rate of Major Mineral Phase in Sintered Iron Ore

HOW A BLAST FURNACE WORKS

Soda Ash ( Sodium carbonate) Manufacture

GCSE BITESIZE Examinations

Chapter 20 CHEMISTRY. Metallurgy and the Chemistry of Metals. Dr. Ibrahim Suleiman

Dr. Joseph J Poveromo, Raw Materials & Ironmaking Global Consulting DR Pellet Quality & MENA Applications

SAIOH Interpretation of Elemental Analyses Results. By: Jaco van Rensburg

TWEED RIVER HIGH SCHOOL 2006 PRELIMINARY CHEMISTRY. Unit 2 Metals

6 METALS & NON METALS

Topic 2.7 EXTRACTION OF METALS. Extraction of Iron Extraction of Aluminium Extraction of Titanium Recycling

Chemistry CH1FP. (Jun15CH1FP01) General Certificate of Secondary Education Foundation Tier June Unit Chemistry C1. Unit Chemistry C1 TOTAL

Influence of TiC on the Viscosity of CaO MgO Al 2 O 3 SiO 2 TiC Suspension System

REMOVAL OF HARDNESS BY PRECIPITATION

Metallurgy, Industrially important compounds and Noble gases

CEMENT MANUFACTURING PROCESS

1 Elements. TAKE A LOOK 2. Identify Look at the illustration and identify one source of iron that comes to Earth from somewhere else.

New GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1

Mark Scheme (Results) Summer Pearson Edexcel GCSE in Chemistry (5CH1F) Paper 01

1 Elements. TAKE A LOOK 2. Identify Look at the illustration and identify one source of iron that comes to Earth from somewhere else.

85 Q.51 Which of the following carbonates would give the metal when heated with carbon? (1) MgCO 3 (2) PbCO 3 (3) K 2 CO 3 (4) CuCO 3

CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education

Iran's Third National Communication to UNFCCC. Chapter 3: National GHGs Mitigation Policies Industrial Processes

Effect of Silicon Carbide on Reactions between Molten Steel and Fused Magnesia Silicon Carbide Composite Refractory

By-Products from EAF Dust Recycling and Their Valorisation. Vlad POPOVICI

5-4 Chemical changes Trilogy

Module: 9 Lecture: 40

Analysis of Calcium Carbonate Tablets

Fundamental Aspects of Calciothermic Process to Produce Titanium

Changes to the Atmosphere

Success story on mineral carbonation of CO 2

Hydrosol System Furnace Cooling Water Cleaning Case Study: North American Stainless

Chemistry CH1HP. (Jan13CH1Hp01) General Certificate of Secondary Education Higher Tier January Unit Chemistry C1. Unit Chemistry C1 TOTAL

BITUMINOUS COAL ASH SULFUR RETENTION IN CIR5^ DEPARTMENT OF REGISTRATION AND EDUCATION ILLINOIS STATE GEOLOGICAL SURVEY CIRCULAR

Influence of Pellet Basicity (CaO/SiO 2 ) on Iron Ore Pellet Properties and Microstructure

Chapter Two: Cycles of Matter (pages 32-65)

Flue Gas Desulfurization by Limestone and Hydrated Lime Slurries

Materials engineering. Iron and steel making

Slag Recycling in Submerged Arc Welding and its Influence on Chemistry of Weld Metal

weight% Alt. 1 Alt. 2 CaO 32,4 33,6 SiO2 33,1 33,7 Al2O3 11,9 11,9 MgO 17,6 16,0

Flue Gas Desulphurization (FGD) plant 2 x 600 MW Coal based Thermal power plant Cuddalore, Tamil Nadu. By MK Parameswaran 23 rd Dec, 2016

Information modeling system for blast furnace control

Types of Metal Alloys

Life Cycle Inventory (LCI) analysis of structural steel members for the environmental impact assessment of steel buildings

1. The History of Metals CHECKPOINT: Metals Through History

Complexity (Reactions & Phase Changes) in Blast

Primary Metal Production

Table of Contents. Preface...

Metal and Non Metals

Prima PRO process mass spectrometer

GENARAL INTRODUCTION TO METALLURGY :Std: XI-CHEMISTRY

Development of the Process for Producing Pre-reduced Agglomerates

Discipline Chemical Testing Issue Date Certificate Number T-3553 Valid Until Last Amended on - Page 1 of 9

IMPROVEMENT OF CONCRETE DURABILITY BY COMPLEX MINERAL SUPER-FINE POWDER

Laboratory Investigations of the Electrical Resistivity of Cokes and Smelting Charge for Optimizing Operation in Large Ferrochrome Furnaces

Compounds & Reactions Week 1. Writing Formulas & Balancing Equations. Write the chemical formula for each molecular (covalent) compound.

Equation Writing and Predicting Products Chemistry I Acc

Materials Engineering PTT 110

PhysicsAndMathsTutor.com. Pearson Edexcel GCSE Chemistry/Science Unit C1: Chemistry in Our World

Advanced Master Course Process Technology of Metals

Lecture 14 Modern trends in BOF steelmaking

Dust Recycling System by the Rotary Hearth Furnace

Material Flow in Japan

CFD MODELLING OF THE STEEL BELT SINTERING PROCESS

Parameters Affecting the Production of High Carbon Ferromanganese in Closed Submerged Arc Furnace

Optimization of Firing Temperature for Hematite Pellets

Mark Scheme (Results) November 2009

PHOSPHORUS - USES LECTURE 10 PHOSPORUS INDUSTRIES PHOSPHORUS (P) IS A VITAL RESOURCE FOR SUSTAINING WORLD AGRICULTURE. 2/6/13. Ch 61 Industrial Chem

Slide 1. Slide 2. Slide 3. Hardness. Concentration is. What s the concentration of red triangles? What s in your pipes? 500 ml

Polish Cement Industry EU ETS lessons learnt

Manufacture of Iron & Steel. Prepared By: John Cawley

Fly Ash as a Partial Replacement of Cement in Concrete and Durability Study of Fly Ash in Acidic (H 2 so 4 ) Environment

GCE. Edexcel GCE Chemistry (6246/02) January Edexcel GCE. Mark Scheme (Results) Chemistry (6246/02)

Fly Ash, Slag, Silica Fume, and Natural Pozzolans

FactSage Independent Study

Quality of liming materials used in aquaculture in Thailand

Thermodynamic database of P 2 O 5 -containing oxide system for De-P process in steelmaking

Edexcel GCSE Chemistry. Topic 4: Extracting metals and equilibria. Obtaining and using metals. Notes.

Energy consumption, waste heat utilisation and pollution control in ferro alloy industry

By THE STAFF OF NML fr VISL, Presented by SHRI D. D. AKERKAR" ABSTRACT

Evaluation of Viscosity of Molten SiO_2-CaO-MgO- Al_2O_3 Slags in Blast Furnace Operation

1. Scaling. H.O.: H-5/21, KRISHNA NAGAR, DELHI Tel.: , Fax:

POTASSIUM SILICATE FOLIAR FERTILIZER GRADE FROM GEOTHERMAL SLUDGE AND PYROPHYLLITE

Module: 5 Lecture: 24

INDIAN SCHOOL MUSCAT SENIOR SECTION DEPARTMENT OF CHEMISTRY CLASS X- PRACTICAL WORKSHEET

Clean energy, natural solutions. Understanding rice husk as a biomass fuel

Lecture 12 Converter Steelmaking Practice & combined blowing. Key words: Top blown steelmaking, combined blowing, bottom stirring, hot metal refining

Slag Valorisation Symposium

Transcription:

1 (a A small piece of marble, calcium carbonate, was added to 5 cm 3 of hydrochloric acid at 25 C. The time taken for the reaction to stop was measured. CaCO 3 (s) + 2HCl(aq) CaCl 2 (aq) + CO 2 (g) + H 2 O(l) Similar experiments were performed always using 5 cm 3 of hydrochloric acid. experiment number of pieces of marble concentration of acid in mol / dm 3 temperature / C ti / min 1 1.00 25 3 2 0.50 25 7 3 1 piece crushed 1.00 1 4 1.00 35 2 Explain each of the following in terms of collisions between reacting particles. (i) Why is the rate in experiment 2 slower than in experiment 1? (ii) Why is the rate in experiment 3 faster than in experiment 1? (iii) Why is the rate in experiment 4 faster than in experiment 1?

(b) An alternative method of measuring the rate of this reaction would be to measure the volume of carbon dioxide produced at regular intervals. (i) Sketch this graph volume time (ii) One piece of marble, 0.3 g, was added to 5 cm 3 of hydrochloric acid, concentration 1.00 mol / dm 3. Which reagent is in excess? Give a reason for your choice. mass of one mole of CaCO 3 = 100 g number of moles of CaCO 3 = number of moles of HCl = reagent in excess is reason [4] (iii) Use your answer to (ii) to calculate the maximum volume of carbon dioxide produced measured at r.t.p. [Total: 13]

2 Calcium carbonate is an important raw material. (a) Name a rock which is made up of calcium carbonate. (b) When calcium carbonate is heated strongly, it decomposes. CaCO 3 CaO + CO 2 (i) Calculate the relative formula mass of: CaCO 3 CaO (ii) 7.00 kg of calcium oxide was formed. What mass of calcium carbonate was heated? (c) Calcium carbonate is used to control soil acidity. (i) Why is it important to control soil acidity? (ii) Both calcium carbonate, insoluble in water, and calcium oxide, slightly soluble, are used to increase soil ph. Suggest two advantages of using calcium carbonate. (iii) Give one use of calcium carbonate other than for making calcium oxide and controlling soil ph.

2 The diagram shows a blast furnace. waste gases raw materials: coke, C iron ore, Fe 2 O 3 limestone, CaCO 3 X Y (a) The following equations represent reactions which take place in the blast furnace. A C + O 2 CO 2 B CaCO 3 CaO + CO 2 C CaO + SiO 2 CaSiO 3 D CO 2 + C 2CO E Fe 2 O 3 + 3CO 2Fe + 3CO 2 (i) Which reaction is used to increase the temperature inside the blast furnace?... (ii) Which reaction is an example of thermal decomposition? (iii) In which reaction is carbon both oxidised and reduced?...... (iv) Which equation shows the removal of an impurity from the iron?... (v) Which equation shows the reaction of an acidic substance with a basic substance?... (b) Use the diagram of the blast furnace to help you answer these questions. (i) What enters the blast furnace at X? (ii) What leaves the blast furnace at Y?

(iii) Name two waste gases that leave the blast furnace. 1.... 2.... (c) The graph shows how the malleability of iron changes as the percentage of carbon in the iron changes. high malleability low increasing percentage of carbon (i) Describe how the malleability of iron changes as the percentage of carbon changes. (ii) Iron obtained from the blast furnace contains high levels of carbon. Explain how the amount of carbon in the iron can be decreased.... [Total: 12]

4 Iron from the Blast Furnace is impure. It contains about 5% of impurities, mainly carbon, sulfur, silicon and phosphorus, which have to be removed when this iron is converted into steel. (a) Explain how the addition of oxygen and calcium oxide removes these impurities. Include an equation for a reaction of oxygen and a word equation for a reaction of calcium oxide in this process................... [5] (b) Mild steel is the most common form of steel. Mild steel contains a maximum of 0.3% of carbon. High carbon steel contains 2% of carbon. It is less malleable and much harder than mild steel. (i) Give a use of mild steel. (ii) Suggest a use of high carbon steel. (iii) Explain why metals are malleable.... [3] (iv) Suggest an explanation why high carbon steel is less malleable and harder than mild steel.... [Total: 12]