GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Division Office,Jamla, 220 kv Sub-Station Compound Website : www.gseb.com Phone No. 02764 280551 E-mail : eetrjamla.getco@gebmail.com TENDER NO : JTD 14 Technical Bid TENDER FOR THE WORK OF - Construction of Fire Protection Wall At 66 KV Moti Adaraj S/S under JAMLA Tr Division TENDER ISSUED TO M/s
Gujarat Energy Transmission Corporation Ltd. Regd. Office, Vidyut Bhavan, Race course, Vadodara-390 007 Division Office, Jamla-382735. Ta: Kalol Dist: Gandhinagar Phone No: (02764)280551 email: eetrjamla.getco@gebmail.com TENDER NOTICE NO : JTD /14 Sealed percentage rate tender are invited in two separate sealed covers Super scribed technical bid and price for the work of Construction of Fire Protection wall at 66 KV Moti Adaraj S/S of Jamal Tr Diviiosn. From registered Contractors in appropriate class with GETCO / Central / State government / Railways / Semi. Govt. and who has executed similar nature of work and magnitude successfully. Tendered should download the blank tender from the website & submit to office of The Executive Engineer (Tr.), Gujarat Energy Transmission Corporation Ltd., Division office, Jamla - 382735 and submit the same as per instructions there in only by RPAD / Speed post. Sr. No. Name of Work 01. Construction of Fire Protection Wall at 66 KV Moti Adaraj S/S of Jamla Tr Diviiosn Estimated Cost Rs. Time Limit. 128270.00 3 Months. Tender Fee Rs. E.M.D. Rs. Security Deposit. Rs. ( 5% of Tender Value). 130=00 1290=00 6415=00 [1] Last date of issue of tender ; (Technical and Price Bids) : During working Hrs. up to 14.00 Hrs.) [2] Last date of submission tender : (During working Hrs. up to 14.00 Hrs.) ( Technical and Price bids.) [3] Due date of opening Technical Bid : : (at 14.00 Hrs, if possible.) [4] Validity of tender : 30 days from date of opening of Technical Bid. No tender shall be accepted / opened in case of receipt after due date and time of tender, Irrespective of delay due to postal service or any other reasons and the GETCO shall not Assume any responsibility for late receipt of tender. The tenders are to be submitted by the intending bidders in single envelop with two separate Sealed and super scribed envelops as listed below :
.2. Envelope No : 1 : Technical bid and Post Qualification bid data, details specification. Envelope No : 2 : Price Bid. Technical and post qualification bid details specification (envelope No.1) will be opened First and subject to evaluation based on the qualification criteria contained in the individual bid document. Price bids (Envelope No. 2 ) of bidders who are assessed and declared as substantially technically responsive on evaluation of the technical bid opened for further commercial evaluation. This Earnest Money Deposit & Tender Fee will be accepted by Demand draft of any Nationalized Bank drawn in favour of GUJARAT ENERGY TRANSMISSION CORPORATION LTD., Jamla. Tender without EMD shall be rejected. Separate demand draft for evaluation. The GETCO reserves the rights to reject any or all tenders or accept any tender without assigning any reason thereof. (V.A. Patel ) Dy. Supdt (A/C)., Executive Engineer., Getco., Jamla. GETCO., Jamla.
SCHDULE : C GENERAL TERMS CONDITION: The mentioned quantities may be increased or decreased while placing the order. Please quote your rates exclusive of sale tax and other government taxes. But inclusive of all s/s local Taxes. Clearly making remarks to that effect material supply destination is at Jamla Division. Also your sale tax. Registration number should be given. Material must be as per IS 5561-1975 and Acceptance tests, Type Test as per IS 2486 1993, Galvanizing confirm as per IS 2633. No advance payment will be made. Literature sample may please be sent along with Quotation. Supplied material must be as per Drawing & in good condition. The supply is required to be completed within 30 days. This time limit has to be strictly adhered to otherwise Penalty will be charged as per corporation s rules for Delay period. The items can be split-up, while placing order as deemed fit. The other general terms and condition of Get co regarding supply will be binding to the tenderer. All clamps / material on must be of original, genuine only. And supporting documents of its genuineness must be submitted i.e. Invoice / Challan of manufacturer, Distributor, seal of manufacturer on product and packing etc. Inspection prior to supply and complete thorough sealing of packing by our representative should be arranged to ensure Perfect original quality & quantity. Any material found duplicate / spurious quality, would be seized and could be released only on receipt of original material, but not before 1 year. The rates shall be quoted both in words and figures and per unit specified in schedule B. There may be any discrepancy between the rate quoted in words and figures, rate quoted in words shall prevail. VALIDITY PERIOD: The rate quoted by me/us will be valid up to 6(six) months and I/We agree to bind by the above. (V.A.PATEL) Executive Engineer, Signature of Bidders. Get co, Jamla.
TECHNICAL BID GUJARAT ENERGY TRANSMISION CORPORATION LIMITED Notes for qualification. The Tender documents are of two separate bids i.e. technical bid (i.e. Quality bid.) and price bids (i.e. Commercial bid.) Following credentials shall be submitted with technical bid. 1: Supplier has to furnish all relevant documents regarding manufacturer / Distributor of Manufacture Company. 2: Experience :- Supplier should produce Experience certificate of having supplied such material to Government Organization of the minimum amount of Rs. 10 Lacks per Annum and satisfactory completion certificate from respective department. 3: Registration :- Bidder quoting for the bid shall have registration in appropriate class with GET CO / Central Government / Semi. Govt. Viz sale TAX / VAT / In Come Tax / Government Excise etc. 4: In come Tax Clearance Certificate./CERTIFY COPY OF PAN no 5: Latest Bank Solvency Certificate from any nationalized bank of sum of minimum 20 % of the estimated cost shown in the tender. 6: Attested copy of power of Attorney, if any, for signing the bid documents. The commercial bid (i.e. Price bid) shown in tender documents comprising schedule B shall be submitted in separate self - addressed envelope provided with tender documents. The commercial bid shall be opened at 3:00 pm, if possible on due date. After scrutinizing of the technical bid, if Party fail to fulfill the above requirement for qualification, the price bids of such parties will not be opened. The price bid of qualifying parties thereafter shall be opened on the date and time communicated to qualified parties afterwards in the presence of parties. The bid should be clearly subscribe with our reference number due date and title of work. The offer should be valid for acceptance for a minimum period of 6 months from the date of opening of technical bid. (V.A..PATEL), Executive Engineer, Get co, Jamla
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Division Office,Jamla,220 kv Sub-Station Compound Website : www.gseb.com Phone No. 02764280551 E-mail : eetrjamla.getco@gebmail.com JTD 14 TENDER NO : Price Bid TENDER FOR THE WORK OF Construction of Fire Protection Wall At 66 KV Moti Adaraj S/S under JAMLA Tr Division TENDER ISSUED TO M/s Tender Fee Rs. PaidM.R.No. Date: EMD Paid Rs. M.R.No. Date
GUJARAT ENERGY TRANSMISSION CORPORATION LIMITED TRANSMISSION DIVISION, JAMLA SCHEDULE -B Name of work :- Construction of Fire protection wall at 66 KV Moti Adaraj s/s. Tender JTD 14 Sr. No Description of Item Qty Unit Rate Amount 1 2 3 4 5 6 Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful materials & disposing of the excavated stuff upto 50M. Lead.(B) Dense or hard soil pg no 18, 1/0.00 ( B ) Excavation for foundation upto 1.5 M. to 3.00 m depth including sorting out and stacking of useful materials & disposing of the excavated stuff upto 50M. Lead.(b) dense or hard soil pg no 18, 2/0.00 ( B ) Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 hand broken stone aggegates 40 m.m. nominal size) and curing complete.excluding cost of form work in:(a) Foundation and plinth as per approved BOQ Providing & laying cement concrete grade 200 and curing etc complete excluding the cost of formwork and reinforcement ( A ) Foundation, Footing, base of columns and mass concrete. SOR pg no 25, SR NO 26, item no 5.8.2 ( A ) As above but for ( C ) lintels, beams, girders upto floor two level. SOR pg no 25, SR NO 26, item no 5.8.2 ( C ) As above but for ( D ) Columns, pillars, posts and struts upto floor two level. SOR pg no 25, SR NO 26, item no 5.8.2 ( D ) 16.00 CMT 59.00 944.00 3.00 CMT 65.00 195.00 3.00 CMT 1747.00 5241.00 2.00 CMT 3362.00 6724.00 1.50 CMT 3439.00 5158.50 3.00 CMT 3439.00 10317.00 7 8 Providing form work of steel / ply wood planking so as to give a smooth exposed finish including centering (steel adjustable tubular supports). Shuttering strutting and propping etc. for any height of propping and centering below supporting floor to ceiling. As per approved BOQ Providing brick masonry in foundation and up to plinth in C.M. (1:6) including racking out joints up to 12mm depth, scaffolding, curing, filling up the gaps between the joints complete as directed by E.I.C. Up to PLINTH. 40.00 SMT 129.00 5160.00 21.00 CMT 2007.00 42147.00
SOR pg 32, sr no 3, 0.0 B 9 As above but for super structure. 5.00 CMT 2072.00 10360.00 SOR pg 33, sr no 6, 6.19 B 10 11 12 Providing 15 mm. thick cement plaster in single coat on fair side Brick / concrete walls for interior plastering upto floor two level and finished even and smooth in : Cement mortar 1:3(1 cement : 3 sand )finishing with a floating coat of neat cement slurry.(r&b Sor-ch-17-I-17.60+17.69 P-68 SOR pg 91 SR no 2 + 5 item no 17.59 + 17.69 Providing Thermo Mechanically treated bars (TMT bars) confirmed to IS 1786 FE 415 for RCC work including bending, binding and placing in position etc. completed for RCC work. As per approved BOQ White washing with lime on wall/celling surface ( Three coats) to give an even shade including thoroughly brooming the surface to remove all dirt. Dust. Mortar drops and other foreign matter. SOR pg 93, SR No 1 + 2, item no 18.11 + 18.12 90.00 SMT 101.00 9090.00 700.00 KG 40.20 28140.00 90.00 SMT 6.00 540.00 Total Rs 124016.50 Service Tax 3.43 4253.77 Total 128270.27 I/ WE AM/ ARE WILLING TO CARRY OUT THE WORK AT % (IN WORDS %) BELOW / ABOVE THE ESTIMATED RATES. THE AMOUNT OF MY/ OUR TENDER WORKS OUT TO RS.. Signature with Stamp of Bidder Executive Engineer Getco Jamla