IBM Maximo for Nuclear Power Release 2 Installation Guide
Note Before using this information and the product it supports, read the information in Notices on page Notices-1. First Edition (November 2006) This edition applies to Release 2 of IBM Maximo for Nuclear Power and to all subsequent releases and modifications until otherwise indicated in new editions. Third-Party Technology: Certain Maximo products contain technology provided under license from third parties, as noted in the following table: IBM Product All Products Third-Party Information Portions 1996-2003 Visual Mining, Inc. Visual Mining NetCharts Server provided by Visual Mining, Inc. 1998-2005 Centennial Software Limited. IBM Maximo Portions 1995-2004 Actuate Corporation. Portions 2005 BEA Systems, Inc. BEA WebLogic Server provided by BEA Systems, Inc. Maximo Discovery IBM Maximo Enterprise Asset Navigator IBM Maximo Mobile IBM Maximo Mobile SE Portions 1996-2005, i-net software GmbH. J-Integra for COM v2.4. 2004 Intrinsyc Software International, Inc. MSDE Copyright Microsoft Corporation. Portions 1993-2002 Snowbound Software Corporation. RasterMaster Raster imaging technology provided by Snowbound Software Corporation. Portions 1991 Pegasus Imaging Corp. Portions 2005 DataMirror, Inc. Portions 2000-2005 Zaval Creative Engineering Group. Portions 1996-2005 Syclo, LLC. Open Source: Maximo contains computer software obtained from the public domain, known as "Open Source" ownership of which is attributed as follows: Portions 2002, Steve Souza (admin@jamonapi.com). Portions 2000-2004, Jason Hunter & Brett McLaughlin. Portions 2004-2005, The Apache Software Foundation (http://www.apache.org/). Copyright International Business Machines Corporation 2006. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents About This Guide.......................................................................v Audience............................................................................. v Related Documentation................................................................. v Support.............................................................................. vi Chapter 1: Introducing Maximo for Nuclear Power....................................... 1-1 Installation Qualifications.............................................................. 1-1 Nuclear Overview..................................................................... 1-1 Chapter 2: Installing Nuclear.......................................................... 2-1 Installation Checklist.................................................................. 2-1 Installation Procedures................................................................ 2-2 Determine Current Software Version.................................................. 2-2 Calibration Manager............................................................... 2-2 Stop the Maximo Application Server.................................................. 2-2 Create Backups................................................................... 2-2 Install Nuclear.................................................................... 2-2 Installing Maximo Keys............................................................. 2-3 Build EAR Files................................................................... 2-3 Restart the Application Server and Deploy EAR Files.................................... 2-3 Notices........................................................................ Notices-1 Copyright IBM Corp. 2006 iii
iv IBM Maximo for Nuclear Power: Installation Guide
About This Guide This section explains how this guide can help you to use IBM Maximo for Nuclear Power. It also provides information about other IBM Corporation resources available to you, such as additional documentation and support. Audience Related Documentation If you are a Nuclear Power customer, read this guide to ensure proper installation of Nuclear into your Maximo 6 installation. This guide is designed for the system administrator, network administrator, or other professional who installs Nuclear. For more information about Nuclear and Maximo, refer to the following documentation: Document IBM Maximo User s Guide Addendum for Nuclear Power IBM Maximo for Nuclear Power Online Help IBM Maximo Finance Manager s Guide IBM Maximo Installation Guide Description Is a separate document delivered in Adobe Acrobat Portable Document Format (PDF) with the product software. The guide should be used in conjunction with the standard IBM Maximo documentation set. Is the primary source of information for using the Nuclear application. Describes how IBM Maximo completes financial transactions and how to set up general ledger accounts. Describes how to install and configure the following software: Application server IBM Maximo Actuate IBM Maximo Multisite Administrator s Guide Describes how to configure IBM Maximo for a Multisite implementation. Copyright IBM Corp. 2006 v
Support Document IBM Maximo Online Help IBM Maximo Reconciliation Module Implementation Guide IBM Maximo Report Administration and Development Guide IBM Maximo System Administrator s Guide IBM Maximo User s Guide IBM Maximo Workflow Implementation Guide IBM Maximo Enterprise Adapter (MEA) System Administrator's Guide Description Provides step-by-step procedures for IBM Maximo applications. Describes how to use the IBM Maximo Reconciliation module to reconcile the two types of information that IBM Maximo maintains about information technology (IT) assets: IT asset data and deployed asset data. Describes how to use Actuate to design and administer IBM Maximo reports. Describes database configuration, security, and other administrative level applications and tasks. Provides an overview of the Maximo end user applications. It also describes how the IBM Maximo applications interact with each other. Provides information about how to use IBM Maximo to plan, design, build, test, implement, and manage Workflow processes. Describes how to configure and use the IBM MEA. Support IBM Corporation users with a valid Annual Customer Support Plan (ACSP) can obtain product support online at Support Online: support.mro.com. Support Online includes information about product releases, software patches, and documentation updates. To find the most current version of a document, refer to the Knowledge Base on this site. vi IBM Maximo for Nuclear Power: Installation Guide
Introducing Maximo for 1 Nuclear Power This guide takes you through the steps to install Nuclear on a pre-configured Maximo 6.2 system. NOTE The pre-configured Maximo 6.2 system must have IBM Maximo Instrument Calibration Manager installed before you install Nuclear. Installation Qualifications This chapter describes what you must know before installing the application. A system administrator should install Nuclear, for doing so requires system administrator rights and privileges. To perform the installation, you should be familiar with the following: PC installation tasks such as creating folders, editing files, and running scripts Utilities such as Enterprise Manager RDBMS system administration privileges Nuclear Overview You use Nuclear to meet Nuclear Regulatory Commission (NRC) requirements, including surveillances and commitment tracking. Nuclear provides the necessary tools to meet NRC requirements and additionally, to implement the Standard Nuclear Performance Model (SNPM) as defined by the Nuclear Energy Institute (NEI) and the Institute for Nuclear Power Operations (INPO) as they exist as of June 2004. This product will be improved as required to support changes to SNPM. Nuclear has many enhancements incorporated into the base Maximo product. These enhancements let you incorporate nuclear-related features such as the following into your daily use of Maximo: create surveillances track design components validate the suitability of a vendor track commitments Nuclear has three new applications developed specifically for nuclear asset maintenance needs. In addition, fourteen standard Maximo applications have Copyright IBM Corp. 2006 1-1
Nuclear Overview been cloned, or copied, in order to add nuclear-specific options to these applications. They are available to only users of Nuclear. (The base applications remain in the product. You can give access to the nuclear-specific clone or base application to different users in your organization depending on their needs.) Asset (Nuc) Asset List (Nuc) Commitment Tracking (Nuc) Companies (Nuc) Frequency (Nuc) Inventory(Nuc) Item Master (Nuc) Locations (Nuc) Organizations (Nuc) Preventive Maintenance (Nuc) Purchase Orders (Nuc) Purchase Requisitions (Nuc) Quick Reporting (Nuc) Request for Quotations (Nuc) Terms and Conditions (Nuc) Work Order Tracking (Nuc) If you customized any of these applications, you must modify them when you install Nuclear. 1-2 IBM Maximo for Nuclear Power: Installation Guide
Installing Nuclear 2 Installation Checklist This chapter describes how to install and configure Nuclear and provides important information that you must know before installing Nuclear. The following checklist provides an overview of the installation process. Detailed instructions begin on the next page. CAUTION You should update Nuclear in a test environment before updating your production environment. [ ] 1 Determine current software version. [ ] 2 Ensure that Calibration Manager is installed. [ ] 3 Stop the Maximo application server(s)/service(s). [ ] 4 Back up your entire <Maximo> folder. [ ] 5 Back up your database. [ ] 6 Install Nuclear. [ ] 7 Install Maximo for Nuclear Keys. [ ] 8 Rebuild the EAR files. [ ] 9 Restart the Maximo application server. [ ] 10 Deploy the EAR files. Copyright IBM Corp. 2006 2-1
Installation Procedures Installation Procedures Determine Current Software Version The procedures described below explain how to install Nuclear. Calibration Manager Your Maximo system must include IBM Maximo 6.2 or later before you install Nuclear. Stop the Maximo Application Server Before you install Nuclear, you must have Instrument Calibration Manager installed. The Nuclear install will not proceed if Calibration Manager is not installed. For information about installing Calibration Manager, see the IBM Maximo Instrument Calibration Manager Installation Guide. Create Backups A best practice is that you have all users exit Maximo, stop all Maximo Application Servers and services and exit all other programs before beginning the installation process. Install Nuclear Before you install Nuclear, you should back up both your entire <Maximo> folder and your database. NOTE If you have multiple Maximo folders or directories you will need to run the installation once for each Maximo folder or directory. To install Nuclear, complete the following steps: 1 Insert the Nuclear CD into the CD-ROM drive. 2 Browse the CD-ROM to choose installs/nuclear and run nuclear.exe. 3 Follow the on-screen instructions. 4 Open a DOS window and change directory to <Maximo>/tools/maximo. 5 Run updatedb.bat to update your database with the changes required by Nuclear. 2-2 IBM Maximo for Nuclear Power: Installation Guide
Installation Procedures Installing Maximo Keys Build EAR Files Load the Maximo for Nuclear Power Key CD and run setup.exe to install the required license files. Rebuild your maximo.ear and maximohelp.ear files. It is important that your maximo.properties file is up to date before building the EAR files. For more information about building EAR files refer to your IBM Maximo Installation Guide. Restart the Application Server and Deploy EAR Files You must restart the Maximo application server and redeploy your EAR files in order to make the Nuclear changes available to users. For information on deploying EAR files, refer to your IBM Maximo Installation Guide. Installing Nuclear 2-3
Installation Procedures 2-4 IBM Maximo for Nuclear Power: Installation Guide
Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-ibm product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: IBM World Trade Asia Corporation Licensing 2-31 Roppongi 3-chome, Minato-ku Tokyo 106-0032, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-ibm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Copyright IBM Corp. 2006 Notices-1
Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-ibm products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-ibm products. Questions on the capabilities of non-ibm products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks AIX, IBM, IBM Corporation, the IBM logo, Tivoli, and WebSphere are registered trademarks of the International Business Machines Corporation in the United States, other countries, or both. Intel, the Intel logo, and Pentium are registered trademarks of the Intel Corporation in the United States, other countries, or both. Microsoft, Windows, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States, other countries, or both. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Notices-2 IBM Maximo for Nuclear Power: Installation Guide
Sun, Sun Microsystems, the Sun logo, and Solaris are trademarks of Sun Microsystems, Inc. Linux is a trademark of Linus Torvalds in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Other company, product, and service names may be trademarks or service marks of others. Notices-3
Notices-4 IBM Maximo for Nuclear Power: Installation Guide