AEROSPACE APPLICATIONS

AEROSPACE APPLICATIONS

S E A L I N G S O L U T I O N S HELICOFLEX High performance metal seal.very high sealing level and exceptional springback. Can be manufactured in all grades of metallic materials. No limitation in shape and dimension. METAL C-RING The sealing concept of C-Flex TM métal C-rings is based on the elastic deformation of a metal C substrate which, during the compression cycle, gices a contact point on each sealing surface. Low load required, many coatings available. CEFIL AIR Elastomeric inflatable seal. Large range of materials especially SBR and silicone. Final dimensions from 100 mm to 10 m and up. ELASTOMERS Elastomer seals molded on anodized aluminium plate.available with FKM and Fluoro-silicon compound. And many other compounds according to NFL 17107 ORIGRAF Die-formed graphite seals with or whithout inner and outer ring.very important elastic recovery. High pressure / temperature applications. QUICK DISCONNECT SYSTEMS Joint consisting of conical flanges assembled by a quick-disconnect collar. Large range of series : 150-300 - 500-1000 (high temperature and pressure). GASKETING MATERIALS A large product line of gasketing material is available, Graphite, ST 706, IFG 5500, Blueguard 3000 Tight quality controls are used to assure product conformance to customer specification. METAL E-RING E-Flex TM Metal E-rings are designed to have low load, high spring back performance for high pressure/temperature applications. In service, the E-Flex TM is pressure energized by the system SAE AS1895/7 Certified N ENV/2003/21223 Certification

A E R O N A U T I C A L Oil and fuel distribution on engines, tube hose, oil pressure sensors ELASTOMER SEALS MOLDED ON ANODIZED ALUMINIUM PLATE Bleed Air Systems take high temperature, high pressure air from the engine and supply it to the air-conditioning and anti-ice systems. Sealing is done with Origraf graphite rings. GRAPHITE RINGS 2 compounds homologated : FKM : 64C8 (NFL 17106 NFL 17164) FLUORO-SILICON : 61D8 (NFL 17106 NFL 17261) And many other compounds according to NFL 17107. CEFIL AIR Used to assemble the A380 wings. Close the confinement engine test loop and aerodynamic wind-tunnel. METAL E-RING Certified for SAE AS1895/7 ECS & VCS ducting for high temperature turbine bleed air. (-60 ºC to 650 ºC) Dimension available up to 7.5 diameter Aluminium Metallic cut gasket on rotor oil casing. QUICK DISCONNECT SYSTEMS FOR TESTING LOOP SAM146 test bench under 37bar at 650 C.

A E R O S P A C E ARIANE 5 VULCAIN ENGINE HELICOFLEX HN 100 & HNR 100 Stainless steel (or Inconel) + SILVER coating Cross section = 1,68-2,48-4,58 mm Ø 10 mm to 430 mm Working conditions : Pressure : up to 600 bars -269 C < T < 600 C N2,O2,He,H2 QUICK DISCONNECT SYSTEMS QDS, optimized flanges fitted with HELICOFLEX SEALS on PF50 PF52 testing loop at Vernon facilities (for Vulcain and Vinci engines) QDS for the upper cryogenic junction between the table and the tower. PHARAO The atomic clock. HELICOFLEX delta type to ensure a ultra high vacuum over the years. SATELLITES GRAVITY PROBE B Reach a life time of 50 years with a Helium sealing level. (10-10Pa.m3.s-1) HELICOFLEX HNV 200 with a diameter of 2 meters.

D E S I G N A N D T E S T I N G GARLOCK FRANCE Saint-Etienne France GARLOCK FRANCE Montbrison France A UNIQUE WORLD-CLASS LABORATORY FACILITY Operating since 1969 in collaboration with CEA (French Atomic Energy Commission) and driven by the most stringent leak tightness requirements of nuclear industry, the Pierrelatte Laboratory has acquired a unique experience in the field of seal design and testing, with special emphasis on high performance metallic seals. Test stands for cycling at pressure and temperature : valve rising stems and 1/4-turn stems, and poppet valve seats Facilities include semi static, static and dynamic testing under extreme test conditions Pressure from 1.0E-10 torr up to 1400 bar Temperatures from -196 C up to +1100 C Severe mechanical loading and cycling conditions Helium leak rate measurement down to 1.0E-11 scc/s World famous companies in all industrial sectors rely on the Pierrelatte laboratory to conduct product testing and development programs.

A COMPREHENSIVE PRODUCT OFFERING SHEETS AND CUT GASKETS CONVENTIONAL GASKETS RESILIENT METAL SEAL S SEALING SYSTEMS AND ASSEMBLIES GRAPHITE SEALS AND RINGS BRAIDS AND COMPRESSION PACKINGS LIP SEALS AND O RINGS KLOZURE OIL SEALS GPA - GULLIVER MECHANICAL SEALS P Guichard & Associés Tél. 04 77 91 03 03 ELASTOMER SEALS HYDRAULIC AND PNEUMATIC COMPONENTS OTHER SEALING PRODUCTS ON SITE SERVICES (PREST PROGRAMM) N Oracle à venir Garlock GmbH Postfach 21 04 64. Falkenweg 1 D-41468 Neuss Tel. 49-21 31/34 9-0 Fax : 49-21 31/349-222 e-mail: mail@garlock.de Garlock France SAS 90, rue de la Roche du Geai 42029 SAINT-ETIENNE Cédex 1 France Tél. 33-4 77 43 51 00 Fax : 33-4 77 43 51 51 e-mail: garlockfrance@garlock.com Garlock (Great Britain) Limited Premier Way, Lowfields Business Park Elland, West Yorkshire HX5 9HF United Kingdom Tel. +44 (0)1422 313600 Fax : +44 (0)1422 313601 e-mail: sales-uk@garlock.com 1666 Division Street Palmyra, New York 14522 Tel. 1-315/597-4811 Fax : 1-315/597-3339