Glass - Chemical Resistance Acids - concentrated Acids - dilute Alkalis Halogens Metals

Similar documents
Density 8.3 g cm -3 Coefficient of thermal x10-6 K -1 Melting point C Specific J K -1 kg -1

Ceramic - Chemical Resistance Acids - concentrated Acids - dilute Alkalis Halogens Metals

Soft magnetic. Vacoflux and Vacodur. Advanced Materials The Key to Progress

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING

CERTIFIED REFERENCE MATERIALS (CRM)

Material data sheet. EOS NickelAlloy HX. Description, application

E-BRITE E-BRITE. Technical Data Sheet. Stainless Steel: Superferritic GENERAL PROPERTIES PLANAR SOLID OXIDE FUEL CELLS CHEMICAL COMPOSITION

Hastelloy G-30 (UNS N06030) Chemical Composition

A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique

Energy Efficiency of Amorphous Metal Based Transformers. R. Hasegawa Metglas, Inc 440 Allied Drive, SC USA

Material data sheet. EOS NickelAlloy IN625. Description, application

Texture and properties - II

Soft Magnetic Properties of Nanocystalline Fe Si B Nb Cu Rod Alloys Obtained by Crystallization of Cast Amorphous Phase

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

International Journal of Scientific & Engineering Research Volume 3, Issue 7, July ISSN

PROFICIENCY TESTING PROGRAMS SOILS & INPUTS

STUDIES ON MICROSTRUCTUREAND MECHANICAL PROPERTIES OFMODIFIED LM25 ALUMINIUM ALLOY

Austarc 12P. Austarc 13S GENERAL PURPOSE ELECTRODES - MILD STEEL GENERAL PURPOSE ELECTRODES - MILD STEEL 76 CONTENTS CLASSIFICATION: DESCRIPTION:

SIMPLY PRECISE USER MANUAL GRATING DISK. Eigenschaften von linearen Maßverkörperungen

AERO 214. Introduction to Aerospace Mechanics of Materials. Lecture 2

APPC PDH/PP PROJECT 8 CATOFIN REACTORS - JUBAIL SAUDI ARABIA ENGINEERING, DESIGN AND INSTALLATION OF REFRACTORY LINING

Chlorimet 2 and 3. DC2 and DC3. Bulletin A/3k

SMU 2113 ENGINEERING SCIENCE. PART 1 Introduction to Mechanics of Materials and Structures

T :

material specifications

HIGH TEMPERATURE CERAMIC & GRAPHITE ADHESIVES

GVB GmbH Solutions in Glass Nordstern-Park Herzogenrath Germany Fax

CHAPTER 3 PROPERTIES OF MATERIALS

Effect of Incorporating Silica Fume in Fly Ash Geopolymers Suresh Thokchom 1, Debabrata Dutta 2, Somnath Ghosh 3

Material Specification

Ash Forming Matter in Peat - The Role of Iron- Mikko Hupa, Maria Zevenhoven, Jaakko Lehtovaara, Stefan Storholm,

Quickly milled, reliably veneered

On the use of slag from silicomanganese production for welding flux manufacturing

AN EXPERIMENTAL STUDY ON GLASS FIBRE REINFORCED CONCRETE

Electron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications Abstract Introduction The Electron Beam Melting Process

Optical and Photonic Glasses. Lecture 4. Glass Composition and Preparations. Professor Rui Almeida

Global Innovation for your High Temp World

Discover the variety of Metal Powders

Dense Refractories Product Data

Chapter One. Introduction (ABET)

DIRECT LASER SINTERING OF BOROSILICATE GLASS

Contract hardening. Leading Manufacturers of Melting, Thermal Processing & Production Systems for the Metals & Materials Industry Worldwide

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

CERAMICS Part 1: Structure and Properties. MSE 206-Materials Characterization I Lecture-7

Copper & Copper Alloys CuNi1Si (OF 2403)

PECULIARITIES OF USING HEREDITARY PROPERTIES OF MELTING STOCK WITH HIGH IRON CONTENT TO OBTAIN HIGH QUALITY AL-SI CASTING ALLOY

M o l yb d e n u m rod ( f u l l y w o r k e d ) PS- I H R 1 0 0

Fly Ash Handbook (FAH)

Utilization of micro silica as partial replacement of OPC & SRC in concrete

ASTM B564-06a Standard Specification for Nickel Alloy Forgings1

Material data sheet. EOS MaragingSteel MS1. Description

Product Test Report. PTR-3074 Swagelok Company. Rev. B Solon Road January 2015 Solon, Ohio U.S.A. Page 1 of 5

Mould fluxes for steelmaking - composition design and characterisation of properties. Research Institute, Stockholm

PROTECTING REFRACTORIES AGAINST CORUNDUM GROWTH IN ALUMINUM TREATMENT FURNACES. C. Allaire and M. Guermazi

NORRIS. Drive Rods. Engineered performance. Designed tough.

weight% Alt. 1 Alt. 2 CaO 32,4 33,6 SiO2 33,1 33,7 Al2O3 11,9 11,9 MgO 17,6 16,0

ATLAS TECH NOTE No. 3

Material data sheet. EOS StainlessSteel 316L. Description

Impact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications

Title : New fused cast cruciform product ER55XX, for glass furnaces checkers, highly resistant under reducing atmosphere

MODIFIED GLASS BATCH CAN HAVE INCREASED ALUMINA CONTENT BY USING FELDSPAR TO IMPROVE GLASS PROPERTIES

TENSILE STRENGTH OF FLY ASH BASED GEOPOLYMER MORTAR

Material data sheet. EOS NickelAlloy IN625. Description

VDM Magnifer 50. Material Data Sheet No August 2002 Edition

AAS - Atomic Absorption Mono Element ppm Standard Solutions (Spectro ECON)

Sulzer Pumps. Cast Materials. The Heart of Your Process

C27200 CuZn37 Industrial Rolled

Soft Materials and Applications

MSE-226 Engineering Materials

AUTOMOTIVE AND LARGE BORE ENGINE APPLICATIONS. Piston Rings and Piston Ring Elements Cast Iron Materials

XRF DRIFT MONITORS DATA CALIBRATION MATERIAL

INVICTUS BODY JEWELRY

Valorisation of Mining and Metallurgical Wastes the Example of Bauxite Residues. Prof. Ioannis Paspaliaris. National Technical University of Athens

STANDARD DI VETRI E MATERIALI CERAMICI

PSection P. Sec. P Page 1

BIND-AMOR: Flash-calcined dredging sediments of the AMORAS mechanical dewatering plant al cement substitute

Specification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.

XRF S ROLE IN THE PRODUCTION OF MAGNESIUM METAL BY THE MAGNETHERMIC METHOD

Introduction to Engineering Materials ENGR2000 Chapter 19: Thermal Properties. Dr. Coates

High strain point glass substrate for photovoltaic solar cell

UTILIZATION OF ALUMINIUM PROCESSING WASTE AS RAW MATERIALS IN THE MANUFACTURE OF CEMENT

Saint-Gobain Ceramics Product Offering

PROPERTIES OF MATERIALS PART HARDNESS

The Convenience Stores For Metal

ME -215 ENGINEERING MATERIALS AND PROCESES

Non-destructive Evaluation of Fatigue Damage in the Stainless Steel by Using Electromagnetic Method

Synopsis: 1 Introduction 28 KAWASAKI STEEL TECHNICA REPORT

ATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of

Standard Specification for Low-Carbon Magnetic Iron 1

Alloy 20 29Ni-20.5Cr-3.5Cu-2.5Mo A351 CN7M J Mo 20Cr-18Ni-6.5Mo-N-Cu A351 CK3MCuN J93254

Subway Cars. Applications Potential

International Thermocouple and Extension Grade Wire Color Codes

EAF burdening How can EAF burdening best utilise DRI? Rutger Gyllenram Kobolde & Partners

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Ferrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons

ATI Datalloy HP TM Alloy

MATERIALS I LECTURE COURSE 2 PROPERTIES OF MATERIALS

Transcription:

Glass - hemical Resistance Acids - concentrated Acids - dilute Alkalis Halogens Metals Good Good Fair Good Fair SiO MAOR Machinable Glass SiO 46/Al O3 6/MgO 7/KO Poor Fair Fair - -

Electrical resistivity mohmcm Glass - Electrical Properties Volume resistivity Ohmcm obalt/boron/silicon/iron/ 36 - Molybdenum/ o69/b /Si/Fe 4/Mo /Ni Iron/ 4 - o66/si5/b 4/Fe 4/Ni 30 - o70/si+b 3/Mn 5/Fe+Mo obalt/silicon/molybdenum/ 35 - o78/si 9/Mo 5/Fe 4/B /Nb - 0 4 @5 SiO 4 - Fe77.5/B 5/Si 7.5 37 - Fe78/B 3/Si 9 5 - Fe79/B 6/Si 5 35 - Fe8/B 3.5/Si 3.5/ Iron//Boron 740 - Fe40/Ni38/B 8/Mo 4 MAOR Machinable Glass - >0 4 @5 SiO 46/Al O3 6/MgO 7/KO /Boron/Silicon 90 - Ni78/B 4/Si 8 /Iron/Silicon/Boron Ni40/Fe40/Si+B 9/Mo - 35 -

oercivity - as cast A m - urie temperature Glass - Magnetic Properties Maximum permeability Remanence ratio - Br/Bs Saturation flux density T Saturation magnetostriction x0-6 obalt/boron/silicon/iron/ 0.8 365-0.83 0.70 < Molybdenum/ o69/b /Si/Fe 4/Mo /Ni Iron/ 0.4 05-0.8 0.55 < o66/si5/b 4/Fe 4/Ni < 350-0.7-0.95 0.8 <0.3 o70/si+b 3/Mn 5/Fe+Mo obalt/silicon/molybdenum/ - 40 - - 0.58 - o78/si 9/Mo 5/Fe 4/B /Nb.46-365-500nm 75 3.8 - SiO - 4 - - - - Fe77.5/B 5/Si 7.5 4 45-0.76.56 7 Fe78/B 3/Si 9 6 405-0.9.58 7 Fe79/B 6/Si 5 6.37 370-0.7.6 30 Fe8/B 3.5/Si 3.5/ MAOR Machinable Glass - 40 - - 5.9 - SiO 46/Al O3 6/MgO 7/KO /Iron/Silicon/Boron Ni40/Fe40/Si+B 9/Mo - < 60 - < 0.8 8 3

Glass - Mechanical Properties ompressive strength MPa Elongation at break Hardness - Vickers kgf mm - Tensile modulus GPa Tensile strength MPa obalt/boron/silicon/iron/ - - 900 63 >700 Molybdenum/ o69/b /Si/Fe 4/Mo /Ni Iron/ - - 960 6 >700 o66/si5/b 4/Fe 4/Ni - - 900 50 500-000 o70/si+b 3/Mn 5/Fe+Mo - - 490 65-75 - SiO -.3 940 55 - Fe77.5/B 5/Si 7.5 - - 860 57 >700 Fe78/B 3/Si 9 - - 900-500 Fe79/B 6/Si 5 Fe8/B 3.5/Si 3.5/ - - 880 58 >700 Iron//Boron Fe40/Ni38/B 8/Mo 4 MAOR Machinable Glass SiO 46/Al O3 6/MgO 7/KO Magnetic opper u99.96/fe 0.04 /Boron/Silicon Ni78/B 4/Si 8 /Iron/Silicon/Boron Ni40/Fe40/Si+B 9/Mo - - - 5 0-00\ -.7 345-400 67 - -. - - 539 - - 850 50 500-000 - - 800 50 500-000 4

Apparent porosity Glass - Physical Properties Density g cm -3 Water absorption - saturation Borosilicate Glass SiO 8 / B O3 3 / NaO 4 arbon - Vitreous - 000 obalt/boron/silicon/iron/ Molybdenum/ o69/b /Si/Fe 4/Mo /Ni Iron/ o66/si5/b 4/Fe 4/Ni o70/si+b 3/Mn 5/Fe+Mo obalt/silicon/molybdenum/ o78/si 9/Mo 5/Fe 4/B /Nb -.3 - - - - -.5 - - - - - 7.80 - - 7.59 - - 7.6 - - 7.75-0.8 0 SiO - 7.8 - Fe78/B 3/Si 9-7.8 - Fe79/B 6/Si 5-7.3 - Fe8/B 3.5/Si 3.5/ Iron//Boron - 7.90 - Fe40/Ni38/B 8/Mo 4 MAOR Machinable Glass 0.5 - SiO 46/Al O3 6/MgO 7/KO Magnetic opper - 8.96 - u99.96/fe 0.04 /Boron/Silicon - 8.0 - Ni78/B 4/Si 8 /Iron/Silicon/Boron - 7.4 - Ni40/Fe40/Si+B 9/Mo - Soda Lime Glass SiO 70/Na O 5/aO 0/ MgO/BO3/AlO3 -.5-5

Apparent porosity Glass - Physical Properties Density g cm -3 Water absorption - saturation Topaz (Yellow Imperial) Al SiO 4 (F,OH) Turquoise ual 6 (PO 4 )4(OH) - 3.55 - -.7-6

Glass - Thermal Properties oefficient of thermal expansion x0-6 K - rystallization temperature Maximum use temperature in air Specific heat J K - kg - Thermal conductivity W m - K - Upper continuous use temperature obalt/boron/silicon/iron/ - 50 80 - - - Molybdenum/ o69/b /Si/Fe 4/Mo /Ni Iron/ - 550 80 - - - o66/si5/b 4/Fe 4/Ni - 450 80-0 - - - o70/si+b 3/Mn 5/Fe+Mo obalt/silicon/molybdenum/ @ 0-00 - - - - - o78/si 9/Mo 5/Fe 4/B /Nb 0.5-0.75 @0-000 - - 750 @5.-.4 @0 900-00 SiO 8.7 @0 553 - - - - Fe77.5/B 5/Si 7.5-550 50 - - - Fe78/B 3/Si 9-55 50 - - - Fe79/B 6/Si 5-480 5 - - - Fe8/B 3.5/Si 3.5/ Iron//Boron - - - - 00-0 - Fe40/Ni38/B 8/Mo 4 MAOR Machinable Glass 3 @0-000 - - 790 @5.5 @0 800-000 SiO 46/Al O3 6/MgO 7/KO Magnetic opper - - - - 40 @3 - u99.96/fe 0.04 /Boron/Silicon - 450 00 - - - Ni78/B 4/Si 8 /Iron/Silicon/Boron Ni40/Fe40/Si+B 9/Mo - - 450 0 - - - 7