Crane/Lifting Operations Supervisor

Similar documents
Construction Skills Certification Scheme

Quarries Skills Certification Scheme

Level 2 NVQ Certificate in Erection of Precast Concrete (Construction)

CPCS SCHEME BOOKLET FOR OPERATORS

CPCS SCHEME BOOKLET FOR OPERATORS

Construction Skills Certification Scheme

AUDIT OF LEAD DRILLERS & DRILLING SUPPORT OPERATIVES

Guidance Note: CSCS Cards

Guidance Note: CSCS Cards

Hazardous. Scheme. the power behind your business

Use of cranes in arboriculture

BHC-P-03.1 Training, Competence and Induction

CANDIDATE HANDBOOK. Boom Truck Operator

OPITO APPROVED STANDARD. LOLER Competent Person. Competence Assessment Standard

Appendix 1 provides guidance to help awarding organisations incorporate relevant parts of these principle requirements in their documentation.

Level 2 Certificate/Diploma for Sustainable Waste Management Operative (0746)

Application for Up-Grade Approved Electrician

BEHAVIOUR ON SAFE SITES

BCSA CRAFT CERTIFICATE TRAINING GUIDE

Rail Safety Management Procedure General Engineering and Operational Systems - Asset Management of Rolling Stock

SCAFFOLDING COURSES SKILLS TRAINING THAT WORKS

Training and Qualifications in Drilling and Sawing

Part 148. CAA Consolidation. 10 March Aircraft Manufacturing Organisations - Certification

Contents. Technical Test Learning. Crawler Crane Tower Crane

Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

Job Description. Engineer (Electrical) Reporting Supervisor

Child Protection Compliance

Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction)

Level 2 NVQ Diploma in Associated Industrial Services Occupations Passive Fire Protection (Construction)

Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway)

Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services Construction Operations (Construction)

Permits and authorisations

Hong Kong Institute of Certified Public Accountants (Incorporated by the Professional Accountants Ordinance, Cap. 50)

POSITION DESCRIPTION

Annex H: Effective worker engagement for health and safety

CISRS CONSTRUCTION INDUSTRY SCAFFOLDERS RECORD SCHEME CAP 609 GENERAL INFORMATION BOOKLET

DOMESTIC ELECTRICAL INSTALLATION PERIODIC INSPECTION REPORT (FOR A SINGLE DWELLING) B ADDRESS AND DETAILS OF THE INSTALLATION Address: SPECIMEN

Guide to Documentation and Marking Part 6 General Accessories and Components for Slings

Level 3 NVQ Diploma in Controlling Lifting Operations Supervising Lifts (Construction)

TRANSPORT TRAILER TECHNICIAN

Level 3 Diploma in Warehousing and Storage ( )

Application Form THE INFORMATION YOU SUPPLY ON THIS FORM WILL BE TREATED IN CONFIDENCE.

Corporate Safety Procedure Grid Mesh, Handrail and Flooring Removal. Table of Contents

SFLWS25 - SQA Code HD4K 04 SfL25 Receive goods

SHORT COURSES. Industry Training New Zealand

Methods of Construction (Construction)

PRESSURE WELDERS REGULATION

DIT HEALTH AND SAFETY OFFICE

Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services Construction Operations (Construction)

Level 2 NVQ Diploma in Construction Operations and Civil Engineering Services Highways Maintenance (Construction)

Level 5 NVQ Diploma in Controlling Lifting Operations Planning Lifts (Construction)

APPLICATION FORM. - Guidance -

ABBEY THEATRE Amharclann na Mainistreach Job Description

MOBILE CRANE OPERATOR

Job Application Form

Level 2 Certificate in Warehousing and Storage Skills (QCF)

CHAS Assessment Standards

GUIDELINES ON SAFETY REQUIREMENTS FOR PURCHASE, RECEIPT, DONATION AND SUPPLY OF WORK EQUIPMENT

G2.4 CONFLICT OF INTEREST

Appendix A provides guidance to help awarding organisations incorporate relevant parts of these principle requirements in their documentation.

HYDRAULIC MOBILE CRANE

NZQA unit standard version 5 Page 1 of 5. Attach, lift, move, and place loads using mobile plant

Preparing and Operating Industrial Counterbalanced Forklifts to Lift and Transfer Loads in the Workplace

Applying Health and Safety legislation and working practices (installing and maintaining electrotechnical systems and equipment) (ELTP01)

HANDING-OVER CERTIFICATE - SCAFFOLDING

Managerial Supervisory Permanent Temporary. Full Time Sales Assistant Saturday Sales Assistant Sunday Sales Assistant Nightfill Assistant

Work Health and Safety Management Systems and Auditing Guidelines

Rules for the certification of Occupational Health and Safety Management Systems

TÜV SÜD BABT Production Quality Certification Scheme

SPECIAL INSPECTOR REGISTRATION (Application forms are a part of this bulletin)

Railway Interface Planning Scheme Rules (RIPS Rules)

Insulation and Building Treatments (Cavity Wall Insulation) Qualification Specification

Level 2 NVQ Certificate and Diploma in Plant Operations (Construction) (6561)

NATIONAL HIGHWAY SECTOR SCHEMES FOR QUALITY MANAGEMENT IN HIGHWAY WORKS. SCHEME 2B and 5B

The Acceptance of Aircraft Components

LANTRA. Highways Sector Scheme 12D SKILLS. TRAINING CENTRE

Job Application Form

MEDICINES CONTROL COUNCIL

GE/GN8640. Risk Evaluation and Assessment. Guidance on Planning an Application of the Common Safety Method on. Rail Industry Guidance Note

Level 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping. Qualification Specification

Operate a dozer (wheeled and tracked)

Cskills Awards L2 NVQ Diploma in Maintenance Operations (Construction)

INSTITUTE FOR WORK AT HEIGHT. A guide to implementing accredited training for the Work At Height Industry

CLERK TO TRUSTEES. Line Manager: Chair of Trustees Grade: JG6 SCP Line Manager: Chair of Trustees Grade: Post JG6 number: SCP tbc

NATIONAL HIGHWAY SECTOR SCHEMES FOR QUALITY MANAGEMENT IN HIGHWAY WORKS SCHEME 10B. Particular requirements for the application of ISO 9001:2015 for

Level 3 Domestic Plumbing and Heating (6189) Qualification Handbook

ADVANCED SCAFFOLDING COURSE { STI, USA APPROVED }

National self-insurer OHS management system audit tool. Version 3

Annex CC To Facilities Management Department. Routine Audit and Monitoring of Health and Safety management functions.

Procedure 14 Internal Audits

Joint Occupational Health and Safety Committee Terms of Reference

Procedure: Safety Management System Procedure - My Safety

Basic ALO knowledge Briefing. RRV Safety Improvement Programme

Operations and Civil Engineering Services Construction Operations (Construction)

Mini Tender PART B External Wall Insulation, Mechanical and Electrical Installation

To support the interview process ensuring suitable venues are booked and set-up and panel papers are distributed.

Overview COSVR678. Service and maintain or commission door, gate or shutter systems

3.2 Direction, Management, Implementation and Review

Quality Assurance Manual

Guidance for Airport Operators Designating Known Suppliers of Airport Supplies

Transcription:

Background New S/NVQ: The S/NVQ Level 3 in Controlling Lifting Operations will become the scheme requirement for demonstration of competence for the categories of A61 Appointed Person and Crane/Lifting Operations Supervisor. The outline of this qualification is attached in Appendix E for information. Transition arrangements: o o For existing Trained Operator (red) card holders: Individuals who already hold a red card for these categories will be assumed to be in the process of collating their Competence Assessment and so will be allowed to continue on to upgrade using the Competence Assessment. For individuals entering the scheme: Individuals taking the Technical Tests from 1st November 2009 will be required to achieve the S/NVQ to upgrade to a blue card. Competence Assessment: The Competence Assessment for these categories will therefore be withdrawn for new entrants to the scheme from 31st October 2009, but will remain valid until 31st October 2011 the last expiry date of red cards issued based on Technical Tests completed by 31st October 2009). Renewal Assessment: The Renewal Assessment will not be affected by these changes. Introduction Providing all criteria contained within this document are met, it allows an individual holding: a CPCS Trained Operator (red) card to upgrade to a CPCS Competent Operator (blue) card where their card expires before 1 st November 2011, or a CPCS Competent Operator card to renew the category of Appointed Person where they are unable to record the minimum of 300 hours over five years (or 5 hours per month pro rata) within their CPCS Plant Operator Logbook. The criteria consist of a declaration of elements of ongoing operating ability within the role of lift planning, which must be confirmed by the Employer. CPCS Technical Test Renewal / Competence Assessment Construction Industry Training Board Page 1 of 6 02.06.2014

Guidance Notes for Completion The Applicant must complete section A below and initial the Applicant column in Annex A. The Employer must complete Sections B and C below. This document MUST be attached to the CPCS application form being submitted by the Applicant. We would advise that a copy is kept by the Applicant for a minimum period of two years to support their Logbook records. CPCS reserves the right to suspend the category if these requirements are not met. Applicant name: Applicant ref: Section A: Applicant details Section B: Employer details Employer name: CITB Registration no (if applicable): Employer address: Section C: Employer confirmation The named individual signing this section must be in a supervisory position and nominated by the employer organisation I confirm that we, the employer, consider the Applicant competent in carrying out duties as a Crane/Lifting Operations Supervisor as per the requirements of the Lifting Operations and Lifting Equipment Regulations 1998 Approved Code of Practice Guidance (L113), British Standards BS 7121 and as the statements in Annex A. Name: Position: Signature: CPCS Technical Test Renewal / Competence Assessment Construction Industry Training Board Page 2 of 6 02.06.2014

Employer Endorsement Annex A Annex A can only be completed by the Endorser and the Applicant. Each statement must be initialled by both parties. The Applicant can only be considered competent providing ALL statements are initialled by the Applicant and Endorser, and signed by the Endorser in their details section. An Endorser is a responsible person within the employer organisation e.g. Line Manager, Supervisor etc., who can confirm the Applicant s operating ability against each of the statements. The Endorser should only initial the statements where they can confirm that the Applicant has carried out the work. Some statements may require the of more than one Endorser. Copies of this form may be made if there are more than two Endorsers signing. The term correctly is defined as conforming to current applicable legislation, manufacturers instructions, industry best practice and safe systems of work. I, the Applicant confirm I am able to correctly: and the Endorser (or Endorsers) confirm(s) The applicant is able to correctly: CPCS Technical Test Renewal / Competence Assessment Construction Industry Training Board Page 3 of 6 02.06.2014

Statements allocate prescribed duties to the crane operator, slinger, signaller and all others involved in the lift Applicant Endorser follow requirements of legislation, regulations, and Codes of Practice that relate to all types of lifting duties ensure that all lifting equipment has been maintained, inspected, thoroughly examined and testing prior to being used allocate different types of lifting accessories ensure that all lifting equipment is set-up, erected, levelled and dismantled correctly for different types of lifting equipment and lift identify information provided by an RCI demonstrate different types of communication methods for lifting purposes read and interpret lifting accessory markings, certificates and thorough examination reports confirm that weights and centre of gravity for loads are in accordance with the given method statement verify that appropriate lifting accessories for given types of loads are in accordance with the given method statement CPCS Technical Test Renewal / Competence Assessment Construction Industry Training Board Page 4 of 6 02.06.2014

Statements ensure that sling angles and sizes are in accordance with the given method statement Applicant Endorser ensure that potential hazards are dealt with in accordance with the given method statement identify and deal with unsafe lifting operations ensure that environmental factors and the surrounding area external to the lift zone do affect the planned lifting operation ensure correct slinging techniques for given loads including balanced, unbalanced and loose prepare an area, with exclusions zones, from given lifting plans that ensures safe access/egress routes for before, during and after the lift mark the position of lifting accessories and ensure load spreading systems are prepared as required verify potential proximity and underground hazards from given plans and drawings confirm personnel requirements to meet the lift plan communicate the lift plan information to others involved in a lifting operation confirm lifting equipment configurations from given plans control a lifting operation using a given lifting plan report positive and negative aspects lifts to the appointed person CPCS Technical Test Renewal / Competence Assessment Construction Industry Training Board Page 5 of 6 02.06.2014

Endorser No 1 Name: Signature: Company name and address: Postcode: Contact Tel No: Position: Date: Endorser No 2 (if required) Name: Signature: Company name and address: Postcode: Contact Tel No: Position: Date: CPCS Technical Test Renewal / Competence Assessment Construction Industry Training Board Page 6 of 6 02.06.2014