Quality and Commitment is Our Pride Sheet Metal Contractors Industrial Metal Manufacturers Paint Finishing Systems Commercial & Institutional
Commitment to Excellence Design/Build Expertise Over the years, automotive manufacturers of all kinds, have come to rely on Tek-Mor Incorporated to provide integral solutions to help in their own manufacturing facilities. With leading edge technology, Tek-Mor is dedicated to answering their customer s needs with unsurpassed quality, a commitment to meeting deadlines and cost effectiveness. Tek-Mor Incorporated Quality and Commitment is our Pride. Tek-Mor designs complete process equipment such as: Body Shop Grind and Weld Booths, Parts Washers, Sound Attenuation Enclosures. Small process booths such as; Tack-off, Skuff Booths, Black Out Booths, Sealer Deck/Booths, PVC Booth, Clean and Flash Tunnels, Clean Rooms, Pre-Treatment Systems, Paint (cure/ dry-off) Ovens, Air Make Up Systems, Turnkey Paint Finishing Systems Automotive Complete Turnkey System of a Ventilated Welding Robotic Enclosure (above) Installation Process of a Downdraft Repair Booth (above) Complete Turnkey System of a Grind Booth (above) Fabrication & Installation of a Prime Oven Extension (above)
Engineering Our engineers, in conjunction with the Tek-Mor management team, review detailed specifications and apply the most time effective and cost efficient methods of production. Utilizing contemporary drafting technology, part developments are laid out to the format and forwarded via computer to the production department. Project management: total co-ordination with customers and all suppliers is provided during design, fabrication, installation and start-up of project by experienced project managers. Customized Fabrication We provide fabrication services from customer approved drawings for projects from varied descriptions within the automotive and sheet metal finishing industries. Our manufacturing facility, with total in-house fabrication control, provides superior quality on time. In addition, we are able to substantially increase our total capacity as required and minimize field activity through shop assembled modules. Installation To Meet Customer Needs Our team of project managers and field supervisors ensure completion of projects on schedule to meet the customer s criteria. We take pride in our ability to consign projects on schedule installed at down-time. Depending on the nature of the project, installation by our experienced crews can be facilitated with either crane or helicopter assistance. Industrial Welded Construction Ductwork (above) Breeching under Welded Construction Ductwork (above) Fabrication & Installation of a 90 ft. Stack Environmental Project (above)
Products and Services Manufacturing and Supply We are dedicated to meeting and exceeding our customers expectations by providing them with the highest quality products. Our products and services include providing a finished product ready for assembly, cutting and punching of various designed products to customer specification for all coated metal up to 10 gauge, stainless steel to 11 gauge. Our Commercial/Industrial HVAC Ductwork and our Stacks and Breeching are all manufactured to SMACNA design standard, professionally engineered by an Ontario P. Eng. and installed to NFPA-96. We manufacture, supply and install HVAC ductwork for Commercial/Industrial and Institutional industries. Our state-of-the art manufacturing facility produces a high quality ductwork, built to SMACNA standards and/or customer s specifications. Our new coil line provides custom length blanking from 14 gauge to 26 gauge mild steel, galvanized or aluminized and up to 20 gauge stainless steel. With our 5 and 6 ft. coil line, we have the ability to manufacture TDF, S&D and welded construction ductwork. In addition, we supply a wide variety of HVAC Ductwork, both insulated and non-insulated, ranging from 24 gauge to 16 gauge mild steel, galvanized, satin coat or aluminized and up to 20 gauge stainless steel. Supply & HVAC
Leading the Way Tek-Mor, an international leader in industrial metal manufacturing and sheet metal contracting, provides customized solutions for a variety of industries. The key to Tek-Mor s success has been its people. The entire team works together to achieve excellence and total customer satisfaction on every project ensuring that the customers needs always come first and are always exceeded. From the beginning in 1986, Tek-Mor has been getting the job done. From the beginning of a project until its delivery and installation, Tek-Mor s dedication and performance are unsurpassed. Tek-Mor has grown from a one man operation to a reputable contractor/manufacturer in the industry. Based on their past experience and proven track record, Tek-Mor is committed to developing new applications in a variety of industries and excels in bringing innovative, efficient and cost effective solutions to their customers. As Tek-Mor continues to keep its clients and employees best interest in mind, they pay tribute and thank their customers and staff who have contributed to their growth and success over the years. Under the guidance and direction of its president, the company has ventured into various areas of the sheet metal industry. With both HVAC and automotive experience, Areas of Expertise Design Turnkey Systems Paint Finishing Systems Environmental Systems Ventilation Systems Fabrication Installations Modifications Engineered Stacks/Breechings Industries Pharmaceutical Hospitals Commercial/Institutional Universities/Colleges Industrial Treatment Plants Automotive Plants Food Industry Exhaust Welded Breechings (above) Insulated Breeching Shop Fabricated (above)
PAINT FINISHING SYSTEMS AIR HANDLING SYSTEMS PRE-TREATMENT SYSTEMS SPRAY BOOTHS OVENS FUME EXHAUST SYSTEMS AIR SUPPLY HOUSES DISTRIBUTION DUCT SYSTEMS FUME INCINERATORS WASTE TREATMENT SYSTEMS COMPLETE TURNKEY SYSTEMS HVAC DUCTWORK SUPPLY STACKS & BREECHING FABRICATION TURRET-CNC (FINN POWER) PUNCH PRESS Fabrication & Installation, Intake Hood of an Air Supply House Project (above/below) WELDED EXHAUST DUCTWORK /BREECHINGS/STACKS HIGH PERFORMANCE INDUSTRIAL ACCESS DOORS MONO PANELS ACCESS DOORS MAN DOORS PERFORATED PANELS SLOTTED CHANNEL FLASHINGS LIGHT PANELS INDUSTRIAL WINDOW FRAMES CLEAN ROOM CEILING & WALL PANELS ACOUSTIC PANELS Tek-Mor Inc. 20 Simpson Road Bolton, Ontario L7E 1G9 Tel: (905) 857-6415 Fax: (905) 857-5514 or (905) 857-8486 www.tek-mor.com