AIVIS STORAGE RACKS Contact: Jenny Wang Tel: +86-25-52109445 Fax: +86-25-52109445 Cell number: +86-136 4515 8738 Email: exporter@aivisrack.com Webs: www.aivisrack.com Nanjing Aivis Shelf Manufacturing Co., Ltd 1
Our products list Light duty racking system Long span racking system Selective pallet racking system Drive-in racking system Cantilever racking system Mezzanine racking system Carton flow racking system Automobile fitting racking system Mobile cabinet racking system Other equipments for racking system Nanjing Aivis Shelf Manufacturing Co., Ltd 2
1. Light duty racking system a. Rivet boltless shelving Rivet shelving is ideal for easy access on all sides with no braces to get in the way. a. Post size :38x38x1.8mm b. 1pc beam are welded 4pcs rivets, which are matched with the post s gourd-hole shape. c. Load capacity < 150kg/layer d. Two types shelves are available: chipboard and steel shelf Nanjing Aivis Shelf Manufacturing Co., Ltd 3
1. Light duty racking system b. Light duty shelving Insertion type by blocks, steel shelf can be adjusted by 50mm up and down. a. Post size :38x38x1.8mm b. Load capacity < 150kg/layer c. Consisting : Posts, steel shelves, cornor pieces, block, bolts and plastic footing. Nanjing Aivis Shelf Manufacturing Co., Ltd 4
2. Longspan racking system It can be supplied with a variety of shelf types from chipboard and steel shelves to wire decking, with divider for order picking application. Step beams are used to enable the shelf to be mounted flush with the edge of the beam. Long Span Shelving is ideal for low and high-rise order picking applications. Four Types are available : Medium duty A rack Medium duty B rack Medium duty D rack Medium duty ND rack Nanjing Aivis Shelf Manufacturing Co., Ltd 5
2. Longspan racking system - Three types shelves a. Chipboard (particle board) Material: pine wood mixed hard wood. Standard size: 1220 x 2440mm (4'x8'), can be cut compatible sizes match the rack s size. Thickness:12mm,18mm,20mm, 25mm Formaldehyde emission: E1 / E2 Color: All kinds of color and design Density: 700~830kgs/cbm Nanjing Aivis Shelf Manufacturing Co., Ltd 6
2. Longspan racking system b. Steel shelf Material: SPCC, 0.6~0.8mm Reinforcements under are welded, the qty is designed according to load capacity and rack s size. Surface treatment : powder coating Normal Color: RAL7035 ( light grey ) Nanjing Aivis Shelf Manufacturing Co., Ltd 7
2. Longspan racking system c. Wire decking Heavy duty welded mesh panels, three supports per panel. A qty of panels will be required depending on each storage / beam length. Full electro galvanized finish Wire Guage(mm): 5mm, 5.5mm Nanjing Aivis Shelf Manufacturing Co., Ltd 8
2. Longspan racking system - Medium duty A rack Load capacity 350kg/layer. Simple structure, assembles in minutes. It can be limitless connection. Shelf can be adjusted by 50mm up and down. Consisting posts, beams, narrow hanging, wide hanging, shelves, safety pins, position-limitation nails and plastic footplate. Nanjing Aivis Shelf Manufacturing Co., Ltd 9
Main parts Upright Section drawing : 1. Size: 55*55*1.5mm. 2. 4pcs per master bay, 2pcs per additional bay. Nanjing Aivis Shelf Manufacturing Co., Ltd 10
Beam Hanging 1. 1.5mm thickness. 2. 4pcs per bay. 1. 2.0mm thickness. 2. Narrow hanging: 2pcs per bay. Nanjing Aivis Shelf Manufacturing Co., Ltd 11
2. Longspan racking system - Medium duty B rack Load capacity 400kg/layer. Simple structure, assembles in minutes. It can be limitless connection. Shelf can be adjusted by 50mm up and down. Consisting posts, beam, H- bracing & D-bracing, shelves, safety pins, bolts and plastic footplates. Nanjing Aivis Shelf Manufacturing Co., Ltd 12
Main parts Upright Section drawing : 1. Size: 75*42*1.5mm. 2. 4pcs per master bay, 2pcs per additional bay. Nanjing Aivis Shelf Manufacturing Co., Ltd 13
H-bracing & D-bracing Beam 1.P-shape beam, size:60*40*1.5mm. 2. Assembling with uprights by hangers. 1. C-shape, size: 30*17*1.2mm. 2. Assembling with uprights by bolts. Nanjing Aivis Shelf Manufacturing Co., Ltd 14
2. Longspan racking system - Medium duty D rack Load capacity 600kg/layer. Simple structure, assembles in minutes. It can be limitless connection. Shelf can be adjusted by 50mm up and down. Consisting posts, beam, H- bracing & D-bracing, shelves, safety pins, bolts and plastic footplates. Nanjing Aivis Shelf Manufacturing Co., Ltd 15
Main parts Upright Section drawing : 1. Size: 55*47*1.8mm. 2. 4pcs per master bay, 2pcs per additional bay. Nanjing Aivis Shelf Manufacturing Co., Ltd 16
H-bracing & D-bracing Beam 1.P-shape beam, size:60*40*1.5mm. 2. Assembling with uprights by hangers. 1. C-shape, size: 30*17*1.2mm. 2. Assembling with uprights by bolts. Nanjing Aivis Shelf Manufacturing Co., Ltd 17
2. Longspan racking system - Medium duty ND rack Load capacity 600kg/layer. Simple structure, assembles in minutes. It can be limitless connection. Shelf can be adjusted by 50mm up and down. Consisting posts, beam, H- bracing & D-bracing, shelves, safety pins, bolts and plastic footplates. Nanjing Aivis Shelf Manufacturing Co., Ltd 18
Main parts Upright Section drawing : 1. Size: 55*57*1.8mm. 2. 4pcs per master bay, 2pcs per additional bay. Nanjing Aivis Shelf Manufacturing Co., Ltd 19
H-bracing & D-bracing Beam 1.P-shape beam, size: 60*40*1.5mm. 2. Assembling with uprights by hangers. 1. C-shape, size: 40*24*1.4mm. 2. Assembling with uprights by bolts. Nanjing Aivis Shelf Manufacturing Co., Ltd 20
3. Selective pallet racking system Europe pallet racking system Dexion compatible pallet racking system USA (teardrop) pallet racking system Nanjing Aivis Shelf Manufacturing Co., Ltd 21
a. Europe palllet racking system 1) Designed for storing few varieties and large quantities of similar goods with very high space utilization. 2) Goods are stored and removed from the same side, or done from the opposite side in accordance with the first-in first-out principle. 3) Especially suitable for standard goods units. 4) Insertion combination between beams and vertical uprights. 5) Parts: upright, bracing, steel shelves, beam, safety pins, pallet support, steel footplate, row spacer, etc. Nanjing Aivis Shelf Manufacturing Co., Ltd 22
a. Europe pallet racking construction Nanjing Aivis Shelf Manufacturing Co., Ltd 23
Main parts Parts pictures spare parts Nanjing Aivis Shelf Manufacturing Co., Ltd 24
Normal sizes of upright Nanjing Aivis Shelf Manufacturing Co., Ltd 25
Normal sizes of beam cc We use 3 hooks if loading capacity is 2.5tons per pair of beam. We will use 4 hooks if loading capacity is more than 2.5tons per pair of beam. We can supply hooks as your requested. Nanjing Aivis Shelf Manufacturing Co., Ltd 26
Load capacity (kg) of beam cc Deflection: L/250 section size 1500 1800 2000 length of beam (mm) 2200 2500 2700 3000 3300 80*50*1.5 2874 1996 1616 1336 1034 887 718 593 100*50*1.5 4823 3350 2713 2242 1736 1488 1206 996 110*50*1.5 / 4184 3389 2801 2169 1859 1506 1245 120*50*1.5 / 5130 4156 3434 2659 2280 1847 1526 130*50*1.5 / / 4853 4010 3106 2663 2157 1783 140*50*1.5 / / 5975 4938 3824 3279 2656 2194 140*50*2.0 / / 7727 6386 4945 4240 3434 2838 Nanjing Aivis Shelf Manufacturing Co., Ltd 27
Normal sizes & load capacity of step beam *Step beams are normally used together with steel shelves. Deflection: L/250 section size 1200 1500 1800 length of beam (mm) 2000 2200 2300 2400 2500 2700 50*30*1.5 442 283 240 159 / / / / / 60*40*1.5 940 600 410 330 / / / / / 60*40*2.0 1215 778 540 430 360 330 300 / / 80*50*1.5 2242 1435 990 800 667 610 560 510 440 80*50*2.0 2921 1870 1298 1051 869 795 730 673 577 110*50*2.0 3934 2731 2212 1828 1673 1536 1416 1214 Nanjing Aivis Shelf Manufacturing Co., Ltd 28
b. Dexion pallet racking system product Upright pitch is 76.2 mm Widely used in most parts of world in any time Super lock is used in beam clip in order to give much safety to rack The upright section size is based on Europe rack section size We can supply powder coating and galvanized rack Nanjing Aivis Shelf Manufacturing Co., Ltd 29
c. Teardrop duty rack 1) Standard sizes to fit most racks 2) Fully utilizes vertical space, suitable for storing all kinds of goods 3) The bearing capacity of each shelf may reach 4,500kg 4) Durable finish, clean appearance and fire resistant 5) Allows you to easily store pallets 6) Special attachments and decking can be used to make the racks capable of supporting other types of unit loads besides pallets (coils, drums and skids) 7) Engineered for maximum strength and value Nanjing Aivis Shelf Manufacturing Co., Ltd 30
4. Drive-in racking system 1) Suitable for large amount of cargo with small number of kinds; 2) The height of each beam can be adjusted by pitch 75mm freely 3) Smart section design and high-quality steel 4) It facilitates the use of forklift trucks, electric reach trucks, narrow aisle turret trucks 5) It is the most widely used design of the storage system 6) Parts: upright, bracing, pallet support rail, footplate, row spacer, bar, top beam, safety pins, etc. 7) Material: high quality steel, Q235 Nanjing Aivis Shelf Manufacturing Co., Ltd 31
Three types upright a. Rhombus-hole upright a. Section Size: 90x67, 100x67, 120x95. b. Thickness: 2.0, 2.3, 2.5, 3.0mm. c. H-bracing & D-bracing : 40x29x1.5mm, 40x34x1.5mm,40x39x1.5mm, matches the three different section size upright. d. The beam can be adjusted by 75mm up and down. Nanjing Aivis Shelf Manufacturing Co., Ltd 32
Three types upright b. Teardrop upright a. Section Size: 80x65, 80x67, 80x70. b. Thickness: 2.0, 2.3, 2.5mm. c. H-bracing & D-bracing : 40x24x1.5mm. d. The beam can be adjusted by 50mm up and down. Nanjing Aivis Shelf Manufacturing Co., Ltd 33
Three types upright c. 八 -shape hole upright a. Section Size: 80x65, 90x67, 100x67. b. Thickness: 2.0, 2.3, 2.5mm. c. H-bracing & D-bracing : 40x24x1.5mm, 40x29x1.5mm, 40x34x1.5mm. d. The beam can be adjusted by 70mm up and down. Nanjing Aivis Shelf Manufacturing Co., Ltd 34
Bar & support rail 1. Single-side bar 3. Support rail Note: Left single-side bar and right single-side bar should be distinguished. 2. Double-side bar Material: Q235, 2.0/2.5mm thickness. Nanjing Aivis Shelf Manufacturing Co., Ltd 35
5. Cantilever racking system 1) This rack can be divided into a single sided or double sided cantilever rack 2) Size and capacity can be fixed by users 3) Parts: upright poles, single face cantilever, two face cantilever safety pins, wire footing plates 4) Material: high quality steel; such as Q235 5) Max Single arm load capacity: 150-650kg 6) Suitable for storage of long, plate duty or ring duty materials product Nanjing Aivis Shelf Manufacturing Co., Ltd 36
Medium duty cantilever 1. Upright & base 2. Arm a. 2pcs C-shape steel (Q235) are welded 1pc upright, as well as base b. Size : 200*60*2.5 / 3.0mm a. Material: 3.0mm thickness steel sheet b. Hanger: 4.0mm thickness Nanjing Aivis Shelf Manufacturing Co., Ltd 37
Heavy duty cantilever 1. Upright & base 2. Arm a. 2pcs C-shape steel (Q235) are welded 1pc upright, as well as base ( if the height 2500mm) ; if the height > 2500mm, the base will be made of 工 -shape steel. b. Size : 300*90*3.0 / 3.5mm a. Material: 3.0mm thickness steel sheet b. Hanger: 5.0mm thickness Nanjing Aivis Shelf Manufacturing Co., Ltd 38
Single-side cantilever Double-side cantilever Nanjing Aivis Shelf Manufacturing Co., Ltd 39
6. Mezzanine racking system 1) Support by themselves and can be designed as multiplayer floors, normally 2-3layers 2) Staircase, railing and elevators are provided 3) Floor supporting racks have complete sizes and models; floors can be flat plates checkered plates, steel chromium plates and wood plates 4) Suitable for higher warehouse, light goods manual handling and large storage capacity 5) Floor panel with high load capacity, low cost, quick construction 6) Can be designed into one layer or multi layers according to actual situation 7) Ensures the fullest space utilization 8) Parts: upright poles, stairs, flat plates, checkered plates steel chromium plates, protecting columns etc. 9) Material: high quality steel 10) Max. floor loading capacity: 500-2,000kg/sqm Nanjing Aivis Shelf Manufacturing Co., Ltd 40
7. Carton flow racking system 1) Widely used in electronics, supermarkets and medicine industry 2) Using roller rail system or pallets with roller and the influence of gravity, first in and first out principle for the goods is implemented 3) Parts: upright poles, crossbeam, bracing, wheel, roller track 4) Material: high quality steel 5) Load capacity: 250kg~500kg per level 6) Specifications: as required Nanjing Aivis Shelf Manufacturing Co., Ltd 41
Roller track Material: aluminum & ABS Note: the dia. and distance of two adjacent plastic wheels is design according to load capacity request. Nanjing Aivis Shelf Manufacturing Co., Ltd 42
8. Automobile fitting racking system Mezzanine duty rack and medium type rack are widely used in this kind of storages. We also design and produce racks according to your requirements. Nanjing Aivis Shelf Manufacturing Co., Ltd 43
9. Mobile cabinet racking system Other equipments for racking system This kind rack is used widely for books market. Nanjing Aivis Shelf Manufacturing Co., Ltd 44
10. Other equipments for racking system Storage basket Uprising truck Nanjing Aivis Shelf Manufacturing Co., Ltd 45
10. Other equipments for racking system Folded stacker rack Hand cart Nanjing Aivis Shelf Manufacturing Co., Ltd 46
Three types pallets 1. Plastic pallet 2. Wood pallet Four normal size: 800x600mm, 1000x1000mm, 1100x1000mm, 1200x1100mm. Nanjing Aivis Shelf Manufacturing Co., Ltd 47
Steel pallets 1. Two ways in 2. Four ways in a. Normal sizes: L800/1000/1100/1200xW800mm/1000/1100mm/1200mm. b. Load capacity: 500~1000kg/2 legs, 1500~2000kg/3 legs. Nanjing Aivis Shelf Manufacturing Co., Ltd 48