RJ Engineering Systems, Inc. Company Profile
about us Specialists in system design, engineering, procurement & manufacturing RJ Engineering Systems, Inc (RJES) is a manufacturer of custom engineered equipment and process packages for the energy sector. RJES began its operations in 1997. RJES is headquartered in Houston, TX, USA and has international locations to serve a world wide customer base. RJES expertise in process engineering, advanced mechanics, thermal engineering, metallurgy, fabrication and state of the art control systems has led to innovative solutions for demanding applications in oil & gas production and processing, refineries and petrochemical facilities around the world. RJES global locations, engineering capabilities, skilled work force and extensive supply base ensure cost effective, quality controlled material and after sales support. Products: Custom Engineered Equipment: Air Compressors- Screw Type Air & Gas Dryers- Desiccant Type Nitrogen Generators- Membrane Type Integrated Process Packages: Instrument Air High Pressure Air & Nitrogen Gas Compression: Process/ Flare Recovery/Gathering Gas Treatment: Sweetening/ Dehydration/Dew Point Control Specialty Fabricated Products: Non conventional designs Clad components & assemblies Valve Packages: Actuated valves Custom trims & modifications Valve control systems High pressure air compressor package Offshore/Non lube cylinders/600 psig Diesel engine driver/closed loop water cooled API 618 Stainless steel coolers/plc controls Area classified-zone 2, IIA/IIB, T3/Dual starters Self generated control power 2 Company Profile
Procurement & Supply Services: Oilfield Equipment & Components Metal products, Equipment & Spares for Upstream, Midstream, Downstream Processors, Petrochemical & Chemical Industries & Equipment Manufacturers. Company Profile 3
product details Custom Engineered Equipment & Packages Indvidually designed to fulfill a wide variety of operating requirements; innovative efficiency improvement features and customization options. Air Compressors: Oil Free Screw & Oil Injected Screw Capacities ranging from 24 cfm to 7400 cfm; discharge pressures are available up to 167 psig for oil free and 500 psig for oil injected type; suitable for ambient temperature up to 140 F Desiccant Dryers: Instrument Air & Process Gas Air dryer capacities ranging from 12 scfm to 6200 scfm; energy efficient designs; high inlet temperature units with molecular sieve desiccants. custom designed gas dehydration units. Nitrogen Generators: Membrane Type 95% to 99.5% inert purity; medium pressure (219 psig) and High Pressure (523 psig) membrane based units; integrated packages with air compressors and/or boosters as options. Integrated Packages: Air/Gas Compression & Processing Packaged to API 618/API 619/API 614/API 671/ ISO 13631 standards; vessels and piping designed and certfied to ASME Sec VIII Div 1 &2/PED and ASME B 31.3 respectively. 4 Company Profile
product details Specialty Fabricated Products & Valve Packages Components and equipment requiring non conventional designs or special cladding and metallurgy; modified trim valves and actuated valves. Specialty Fabricated Products: Custom designed/clad Custom designed flanges, connectors & piping specials; corrosion resistant and wear resistant clad components- weld on, sprayed on & vaccum brazed; alloy steel, stainless steel & nickel alloys. Valve Packages: Actuated/Modified Valves Pneumatic, hydraulic, electric & gas operated actuators- linear & rotary, SIL2 & SIL3 packages, Partial Stroke Test enabled, fire check & volume bottles, API trims 5 to 18, Inconels & Hastelloys Engineering Compliance Innovation All the products are engineered to meet the requirements of relevant standards, with process simulations and design calculations available for review. Codes, standards and functional specifications are strictly adhered to, with special emphasis on metallurgy, testing and area classification requirements. The operation range and performance limits of the products offered are constantly improved by innovative system design techniques and interactive empirical data. Company Profile 5
procurement & supply services Oilfield Equipment & Components Metal products, Equipment & Spares for Energy sector Engineering enabled sourcing & procurement; heat treatment, surface treatment & coating; testing & documentation; inspection & certification. Oilfield Equipment: Creative solutions Independent wellheads, sour service & corrosive service wellhead components and downhole components; surface equipment, API 6A & API 6D valves; cementing equipment, spools and valves; high pressure hose assemblies; jack up rig equipment and components; drilling and underreaming tools; fishing tools; corrosion resistant piping and fittings; HDPE pipe fittings, stub ends and transition pieces. Metal Products: Full traceability Carbon steel, alloy steels, austenitic, ferritic, duplex stainless steels and nickel alloys; plates, pipes, fittings, flanges, tubes, custom forgings and castings; EN 10204 3.1 & 3.2 Certifications; stabilization heat treatments, quenching & tempering and surface hardening; corrosion testing, mechanical testing and chemistry evaluations; tube bending and solution annealing; explosion cladding and machining. Equipment & Spares: Replacement/Retrofit/Improvement Replacement equipment and parts, spare parts; reverse engineering, retrofiiting and efficiency improvements; custom product manufacturing. Turbines, engines, pumps, compressors, blowers and fans; valves, filters and filter elements; machinery and parts; bearings and blocks; Instruments and controls; panels and spares; motors, generators and switchgear. 6 Company Profile
infrastructure & skill set Manufacturing & testing facility, Engineering skills Established vendor & OEM base Design, Engineering, Manufacturing in Houston, TX, USA; Reputed OEMs and qualified sub vendors for major equipment and sub components. The workforce of engineers of relevant disciplines and experienced technicans involved in the design, engineering, manufacture and testing of the equipment and packages are ably complemented by the huge talent and expertise of OEMs who provide the major components of the systems offered. The R&D department engages in continous innovation aided by simulation models of real life applications of the equipment and packages being supplied. The facility for manufacture of components, fabrication, assembly and testing is state of the art, equipped with tools and equipment spread over three buildings, with a total built up area of 48,000 square feet. The plant is located in a 6 acre plot, close to Houston s Energy Corridor District, near qualified sub vendors for specialized services. The integration of workflow with schedule of the major OEMs ensures timely deliveries. Process modeling & simulation Mechanical modeling & dynamic analysis Torsional & pulsation studies Piping design & stress analysis Pressure vessel design & analysis 3 D modeling & drawings Datasheets & specifications Product documentation & instruction manuals Material Take Off & BOMs Material inspection & inventory control Component testing & certification Traceability & travellers Welding qualifications Machining, welding & fabrication Surface preparation & painting Assembly, testing & calibration Company Profile 7
RJ Engineering Systems, Inc. 13805 West Road Suite 350 Houston, TX 77041 USA Tel: +1-281-897-0350 Fax: +1-281-897-0355 E-mail: sales@rjesusa.com www.rjesusa.com CP-16-3