Section 11. API 7500lb Mud Gate Valves
|
|
|
- Patrick Perry
- 6 years ago
- Views:
Transcription
1 Section 11. API 7500lb Mud Gate Valves Section 11a API 7500lb Rubber Seated Mud Gate Valves Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A ANSI B31.3 ASME VIII MSS-SP-55 NACE MR Specification for Wellhead and Christmas Tree Equipment Chemical Plant and Petroleum Refinery Piping Boiler and Pressure Vessel Code Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment Gate Valves are available in either rubber or metal seated designs depending upon actual service conditions. Contact Forum for further details: PRESSURE & TEMPERATURE RATINGS RUBBER SEATED MUD GATE VALVES MAX. WoRKING PRESSURE TEST PRESSURE 7,500 PSI 11,250 PSI API P (-29 DEG C) TEMPERATURE TO RATING U (+121 DEG C) MATERIAL REQUIREMENTS MATERIAL CLASS BoDY, BoNNET, END AND outlet CoNNECTIoNS PRESSURE CoNTRoLLING PARTS E.G. STEMS AA - GENERAL SERVICE CARBON OR LOW ALLOY STEEL CARBON OR LOW ALLOY STEEL BB - GENERAL SERVICE CARBON OR LOW ALLOY STEEL STAINLESS STEEL DD - SOUR SERVICE** CARBON OR LOW ALLOY STEEL* CARBON OR LOW ALLOY STEEL* EE - SOUR SERVICE** CARBON OR LOW ALLOY STEEL* STAINLESS STEEL* **As defined in NACE MR *In accordance with NACE MR GENERAL NOTE: Please contact GonPetro for any special material or dimensional requirements.
2 Section 11a. API 7500lb Rubber Seated Mud Gate Valves Table 11a.1 Butt Weld End Valves Size (in) 2x x4 6x5 A (End to End) B (Seat Bore) 51 (76) C (Open) D (Handle Dia) Weight (kg) Table 11a.2 10,000lb Flanged End Valves Size (in) A (End to End) B (Seat Bore) 51 (76) C (Open) D (Handle Dia) Weight (kg)
3 Table 11a.3 Hub End Valves Size (in) 2x x4 6x5 A (End to End) B (Seat Bore) 51 (76) C (Open) D (Handle Dia) Weight (kg)
4 Section 11. API 7500lb Mud Gate Valves Section 11b API 7500lb Metal Seated Mud Gate Valves Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A ANSI B31.3 ASME VIII MSS-SP-55 NACE MR Specification for Wellhead and Christmas Tree Equipment Chemical Plant and Petroleum Refinery Piping Boiler and Pressure Vessel Code Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment Gate Valves are available in either rubber or metal seated designs depending upon actual service conditions. Contact GonPetro for further details: PRESSURE & TEMPERATURE RATINGS METAL SEATED MUD GATE VALVES MAX. WoRKING PRESSURE TEST PRESSURE 7,500 PSI 11,250 PSI API K (-60 DEG C)) TEMPERATURE TO RATING Y (+345 DEG C) MATERIAL REQUIREMENTS MATERIAL CLASS BoDY, BoNNET, END AND outlet CoNNECTIoNS PRESSURE CoNTRoLLING PARTS E.G. STEMS AA - GENERAL SERVICE CARBON OR LOW ALLOY STEEL CARBON OR LOW ALLOY STEEL BB - GENERAL SERVICE CARBON OR LOW ALLOY STEEL STAINLESS STEEL DD - SOUR SERVICE** CARBON OR LOW ALLOY STEEL* CARBON OR LOW ALLOY STEEL* EE - SOUR SERVICE** CARBON OR LOW ALLOY STEEL* STAINLESS STEEL* **As defined in NACE MR *In accordance with NACE MR GENERAL NOTE: Please contact GonPetro for any special material or dimensional requirements. Max. working pressures stated are suitable for temperatures up to 121 C. De-rating of max. working pressure will occur as the operating temperature increases above 121 C. Consult GonPetro for further details.
5 Section 11b. API 7500lb Metal Seated Mud Gate Valves Table 11b.1 Butt Weld End Valves Size (in) A (End to End) B (Ctr to Base) C (Open) D (Handle Dia) Weight (kg) Table 11b.2 API 10,000lb Flanged End Valves Size (in) A (End to End) B (Ctr to Base) C (Open) D (Handle Dia) Weight (kg)
6 Table 11b.3 Hub End Valves Size (in) A (End to End) B (Ctr to Base) C (Open) D (Handle Dia) Weight (kg)
7 Section 12. API 6A Plug Valves Plug Valves are designed and manufactured in accordance with the following specifications:- API 6A ANSI B31.3 ASME VIII NACE MR Specification for Wellhead and Christmas Tree Equipment Chemical Plant and Petroleum Refinery Piping Boiler and Pressure Vessel Code Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment Plug Valves are available in either lever, gearbox or remote operation for use in the following pressure ratings and services. PRESSURE & TEMPERATURE RATINGS MAX. WoRKING PRESSURE 5,000 PSI 10,000 PSI 15,000 PSI TEST PRESSURE 7,500 PSI 15,000 PSI 22,500 PSI PRODUCT SPECIFICATION 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 LEVELS API P (-29 DEG C) P (-29 DEG C) P (-29 DEG C) TEMPERATURE TO TO TO RATING U (+121 DEG C) U (+121 DEG C) U (+121 DEG C) MATERIAL REQUIREMENTS MATERIAL CLASS BoDY, BoNNET, END AND outlet CoNNECTIoNS PRESSURE CoNTRoLLING PARTS E.G. STEMS AA - GENERAL SERVICE CARBON OR LOW ALLOY STEEL CARBON OR LOW ALLOY STEEL BB - GENERAL SERVICE CARBON OR LOW ALLOY STEEL STAINLESS STEEL CCG-ENERAL SERVICE STAINLESS STEEL STAINLESS STEEL DD - SOUR SERVICE** CARBON OR LOW ALLOY STEEL* CARBON OR LOW ALLOY STEEL* EE - SOUR SERVICE** CARBON OR LOW ALLOY STEEL* STAINLESS STEEL* FF - SOUR SERVICE** STAINLESS STEEL* STAINLESS STEEL* **As defined in NACE MR *In accordance with NACE MR GENERAL NOTE: Please contact GonPetro for any special material or dimensional requirements.
Compact Trunnion Mounted Side Entry Ball Valves
Compact Trunnion Mounted Side Entry Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
Joint RTJ. Maximum Hardness Brinell. Maximum Hardness Rockwell B. Ring ID. Material. Soft Iron. Carbon Steel AISI 502 S410 AISI 410 AISI 304 S304 S306
- RTJ Joints are machined metal rings in accordance with the standards established by the American Petroleum Institute (API) and the American Society of Mechanical Engineers (ASME), for applications in
Code. 1) Code. Standard or Specification. Bolting
Code 1. Code 1) Code (1) ASME B 31.1 : Power Piping (2) ASME B 31.3 : Process Piping (3) ASME B 31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 2) Material Code Bolting
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
Pipeline Construction
Project Engineering Standard Solutions, Standards and Software www.klmtechgroup.com Page 1 of 34 Rev: 01 KLM #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia. KLM
GWC Italia. Proven technology for individual valve solutions worldwide WGV-1002
GWC Italia Proven technology for individual valve solutions worldwide api 6a gate valves WGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network italy
87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
All definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.
21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised
ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Drilling and production equipment Drillthrough
INTERNATIONAL STANDARD ISO 13533 First edition 2001-12-01 Petroleum and natural gas industries Drilling and production equipment Drillthrough equipment Industries du pétrole et du gas naturel Équipements
RHINO VALVES WORLDWIDE. Cryogenic C44/C600 CRYOGENICS
RHINO VALVES WORLDWIDE Cryogenic C44/C600 CRYOGENICS Based on the Series 44, this valve has an extended stem to move away the drops cryogenic temperatures of the operator (human or automatic). This valve
Not Just Tight Shut Off Very Tight Shut Off!
APV-LLK-2 DELATITE VALVES Not Just Tight Shut Off Very Tight Shut Off! The Latest Technology in Severe Service Ball Valves Zero Leakage High Pressure High Temperature Metal Seated Repairable Model APV-LLK-2
valves and actuators compact valves
and actuators compact valves 100 C 55 M 20 Y 0 K 0 C 0 M 0 Y 80 K compact introduction PetrolValves is a leading manufacturer of for the oil and gas industry. Formed in 1956, PetrolValves has grown to
88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
For outdoor installations, see Vale Engineering Standard Specification SPEC
SPEC-3023 1/7 1.0 PURPOSE This specification describes the minimum requirements for dry (less than 100 ppm H20) gaseous sulphur dioxide at pressures up to and including 10 PSIG for indoor service. Do not
88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
º to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
Master Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
ASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
Table of Contents Who We Are 01. Casing Heads 02. Casing Spools 03. Tubing Spools 04. Threaded Tubing Heads 05. Multibowl Wellhead System 06
Table of Contents Who We Are 01 Casing Heads 02 Casing Spools 03 Tubing Spools 04 Threaded Tubing Heads 05 Multibowl Wellhead System 06 Bottom Hole Test Adapters 07 Tubing Head Adapters 08 Secondary Seals
Technical information
Extract from catalogue N 0 Technical rmation Standards Materials Design / construction ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F
Table of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
Anderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
is a made in Italy ball valves manufacturer company for oil & gas application and chemical process industries.
is a made in Italy ball valves manufacturer company for oil & gas application and chemical process industries. Memit Valves Head Office & Production are located in the north of Italy, close to the heart
ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
ANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
VALVES & MEASUREMENT. NUTRON TT/TM/TL Forged Steel Trunnion Mounted Ball Valves NUTRON
NUTRON TT/TM/TL Forged Steel Trunnion Mounted Ball Valves NUTRON 2 NUTRON TABLE OF CONTENTS NUTRON tt/tm/tl Forged steel trunnion mounted ball Valves Introduction... 5 MODEL TT Specifications and Compliances...
This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
Manufacturing Standard. Testing Standard BS Specification >> Female Ends
Manufacturing Standard BS 5351 6 to 50mm Screwed End BSPT/NPT/BSP Female Ends Precision INVESTMENT CASTING BODY/CAP Manufacturing Standard BS 5351, API 6D 15 to 100mm Flanges as per ANSI B16.5Raised Face
DISTRIBUTED VALVES. DEMCO Gate Valves DEMCO
Gate Valves 2 TABLE OF CONTENTS Gate Valves Introduction... 4 Series DM Gate Valves... 5 Series DM 7500 Gate Valves... 7 Series DT/DB Gate Valves... 9 PRODUCT SPECIFICATIONS General Technical Information...
BALL VALVES SPECIFICATION
DOCUMENT NO: 0000-TS-L006 BALL VALVES SPECIFICATION Prepared By: Chevron Niugini Project Services Limited 6 28 Feb 02 Approved for Construction SAC MGB PRW PRW LRF 5 04 May 01 Approved for Construction
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
COMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves
May 2013 Process Industry Practices Piping Purchasing Requirements for Valves PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
Fully Welded Ball Valves
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. Fully Welded Ball Valves Type 8 & VALVITALIA GROUP VALVITALIA is an Italian Group of valves and other energy equipment manufacturers
D I S T R I B U T E D V A L V E S
TABLE OF CONTENTS FEATURES AND BENEFITS Series DM Gate Valves 2 Series DM 7500 Gate Valves 3 Series DT & DB Gate Valves 4 PRODUCT SPECIFICATIONS General Technical Information 6 DIMENSIONS AND MATERIALS
ASTM A105/A105M-10. Standard Specification for Carbon Steel Forgings for. Piping Applications ¹
Standard Specification for Carbon Steel Forgings for Piping Applications ¹ 1. Scope :- 1.1 This specification covers forged carbon steel piping components for ambient and higher temperature service in
1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
MDV SERIES 3 WAY BALL VALVES
MDV SERIES 3 WAY BALL VALVES Diverting ball valves for industrial and process applications. Design Pressure Rating 150# to 1500# Available in Sizes ½ to 12 2500# Available in Sizes ½ to 4 Valve Size 1/2
ASME B16.5 History Rev Page 1 of 9
Page 1 of 9 Presented here is a history of the development of ASME B16.5, Pipe Flanges and Flanged Fittings prepared by Guy Jolly and Don Frikken. Topics included in separate sections are: 1. General History
CAST STEEL SAFETY AND RELIEF VALVE CATALOG
CAST STEEL SAFETY AND RELIEF VALVE CATALOG www.walworthvalves.com INDEX Introduction walworth Company... 4 walworth Engineering control... 5 walworth quality system... 5 WALWORTH quality control equipment...
SUFA STEEL GLOBE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA STEEL GLOBE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Globe valves are used where throttling or both throttling and shut off are required. They can
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
Carbon steel or Stainless steel
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure
Standards Manager Web Standards List MSS-Manufactures Standardization Society of the Valve and Fitting
Standards Manager Web Standards List MSS-Manufactures Standardization Society of the Valve and Fitting Id Number Title Year Organization Page 1 SP-60 Connecting Flange Joint between Tapping Sleeves and
PRODUCT RANGE. Ball Valve Butterfly Valve Gate Valve Globe Valve Check Valve Forged Valve. Information:-
PRODUCT RANGE Ball Valve Butterfly Valve Gate Valve Globe Valve Check Valve Forged Valve Information:- www.invacovalves.com invacovalves@gmail.com support@invacovalves.com +91 9619 010 130 +91 9920 900
COMMERCIAL VALVES. When QUALITY, SERVICE and PRICE MATTER MOST! GATE VALVES GLOBE VALVES CHECK VALVES BUTTERFLY VALVES
COMMERCIAL CONSTRUCTION FIRE PROTECTION HVAC IRRIGATION MINING WATER & WASTE MANAGEMENT OIL & GAS POWER GENERATION When QUALITY, SERVICE and PRICE MATTER MOST! COMMERCIAL VALVES GATE VALVES GLOBE VALVES
PENBERTHY SERIES 100 AND 200 STRAIGHT PATTERN FLAT GLASS GAGECOCKS
Straight pattern gagecocks that provide a 90 connection to the process vessel and isolate the gage chamber from the liquid content of the vessel FEATURES Straight pattern. Integral bonnet (100 series).
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE Appropriate material selection is the cornerstone of pressure equipment
ASTM B363-06a Standard Specification for Seamless and Welded Unalloyed
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings 1. Scope :- 1.1 This specification cover fittings intended for general corrosion resisting and elevated
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
INTERNATIONAL VALVES. Meeting your requirements and deadlines precisely.
D&D INTERNATIONAL VALVES Meeting your requirements and deadlines precisely. D&D INTERNATIONAL VALVES Over the last 20 years, D&D International Valves has established itself as a leading supplier of valves
M Series 3-PC High Performance Metal Seat Ball Valve
M Series 3-PC High Performance Metal Seat Ball Valve 1 M Series 3-PC High Performance Metal Seat Ball Valve Full Bore TH/SW/BW/Flanged Ends Class 600LB The A-T Controls M Series metal seat ball valve is
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 2017/0/12 1/ This specification describes the minimum requirements for piping systems for the following service: Process Water or Underground Dewatering Service piping systems at pressures
All definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
DEMCO Gate Valves. Dependability, in-line repairability, flexible trim options and drop-tight, position shutoff
DEMCO Gate Valves Dependability, in-line repairability, flexible trim options and drop-tight, position shutoff 1 Table of Contents DEMCO GATE VALVES Introduction... 2 Series DM Gate Valves... 3 Series
Process Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
SECTION 2.0 REFERENCES
SECTION 2.0 REFERENCES 2.1 Standards... 1 2.2 Other References... 3 This page intentionally left blank. September 2010 API Recommended Practice 571 2-1 2.1 Standards The following standards, codes and
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
KIPO ISO 9001 H I - P E R F O R M A N C E CONTROL VALVES ORE SHUT-OFF VALVE KBV260 SERIES
ISO 9001 KIPO H I - P E R F O R M A N C E CONTROL VALVES since 1987 GENERAL INFORMATION Application Refining : Catalyst Slurry Handling, Heavy Oil Units Iron & Steel (Ore, DRI, HCI), Hydrogen Isolation
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
Masoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
Poyam. Valves AMPO. Cryogenic Service High Pressure General Service Metal Seated Special Application
AMPO Poyam Valves Commitment made of steel AMPO S. Coop., located in Idiazabal, Spain, and founded in 1964, has been involved in many large international projects, supplying not only the product but also
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
REVISIONS App PC. App Sud. App Thom 2011/10/26 GS 2012/10/01 BL 2011/10/26. Pending GS 2012/10/01 BL 2012/10/23. Pending MDF 2011/10/26 GS 2013/04/22
1/14 Rev 1 2 3 Description Document format and number changed. Previous number 3503-02.01.621 Approved for use in Thompson Piping system Approval Requirements for MB updated Specification Reference Correction
ROSSI INDUSTRIES FORGING SOLUTION FLANGE / FITTING / VALVE
ROSSI INDUSTRIES FORGING SOLUTION FLANGE / FITTING / VALVE FLANGE / FITTING / VALVE FORGING SOLUTION ABOUT ROSSI ROSSI FORGING is a forging factory offering products of exceptional quality. Our commitment
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
ISO 9001:2008 IML Italy, Delcorte France, Metalfar Italy, ULMA Spain
Tylos Oilfield Services WLL was initially handled by Tylos Building Materials EST, and due to the increase in business volume became an independent establishment in 2008 to handle the oilfield related
Iron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
M33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
International Standard Valve, Inc.
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are their special options is a registered trademark of International Standard Valve, Inc. www.isvalve.com
Ugitech Stainless steel solutions for the oil and gas industry
Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously
Standard Specification for Carbon Steel Forgings for Piping Applications 1
Designation: A0/A0M 4 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard Specification for Carbon Steel Forgings for Piping Applications
Design, Specifications and Future Challenges for Cryogenic Valves
Design, Specifications and Future Challenges for Cryogenic Valves Brandon Bounds Jim Tesch Bechtel Oil, Gas, and Chemicals Valve Manufacturers Association of America 2017 Technical Seminar, Exhibits, and
INDUSTRIAL VALVES PIPING PACKAGES VARIOUS EQUIPMENT
INDUSTRIAL VALVES PIPING PACKAGES VARIOUS EQUIPMENT UNIVERSAL S.R.L. HEAD OFFICE FACTORY: 29010 TREVOZZO DI NIBBIANO V.T.(PC) ITALY- VIA MOLINO FRANZINI 13 TEL.+39/0523997677 TELEFAX +39/0523997354 VAT:
PENBERTHY SERIES 300 AND 400 OFFSET PATTERN FLAT GLASS GAGECOCKS
Offset pattern gagecocks that provide a 90 connection to the process vessel and isolate the gage chamber from the liquid content of the vessel FEATURES Offset pattern allows easy cleaning. Integral bonnet
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
Stainless Steel St St Butt Weld Fittings
What are Butt Weld Fitttings? - Butt Weld Fittings are a family of fittings used in connecting and creating pipework systems whereby they are welded into the system using circumferential butt welds. They
Standard Specification for Carbon Steel Forgings for Piping Applications 1
Addr: 29, 227 Changle Rd., Shanghai, 2000. Tel: 86-2-6470807 Designation: A 0/A 0M 0 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard
ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves
INTERNATIONAL STANDARD ISO 14723 Second edition 2009-06-15 Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves Industries du pétrole et du gaz naturel Systèmes de
Requirements for bending and flaring of piping Objective, target group and warrant...3 Requirements...3 Cold Bending...4 Induction Bending...
Technical and professional requirements, TR1969, Final Ver. 2, Valid from 2006-09-29 Publisher/follow-up: Chiefengineer Materials Technology Classification: Open Validity area: Statoil Group/All locations/all
ASTM Standards for Pipe & Fittings
for Pipe & Fittings There are many International Standards for stainless and carbon steel pipes and fittings. The list below is a basic overview of some of these. For more in-depth details of these Standards