Carton Flow Products by Unex

Carton Flow Products by Unex SPAN-TRACK by UNEX EASY RUGGED RELIABLE PATENTED

SPAN-TRACK Carton Flow Track Full Width Rollers for Total Carton Support, Totally Reliable Flow Fits Any Rack. No Shelves Needed. Span-Track sections can be added to any new or existing pallet rack, supported by front and rear beams. Usable volume of rack is maximized. No shelves or intermediate supports are needed (as with plastic wheel track). High Capacity, High Durability Span-Track takes the abuse of active warehouses and assembly plants. Galvanized steel side channels, 3 /4 diameter tempered aluminum full width rollers and full length 3 /16 steel axle carry loads up to 50 lbs. per ft. Unlike plastic wheels, it withstands repeated impact loading. Plastic wheel track just doesn t compare. Patented/ 7-Year Warranty Patented Span-Track carries a 7-Year PlatinumWarranty. Our no-maintenance pledge reflects our superior record in the field. Unrivaled Flow Span-Track gets product to pick point consistently. Pickers benefit from safe, accurate, efficient and rapid picks. Span-Track is the proven space- and time- saver. Economical Ease of installation and reslotting, long life, patented design, and superior dayafter-day operation all add up to a sound economic choice. Span-Track by Unex, The Authority on Carton Flow, just makes sense. Span-Track Carton Flow has advantages on many levels. Traditional Static Storage Live Storage with Span-Track Inaccessible Head Clearance Poor Visibility Unsafe Picks DEAD ZONE Extra Levels, Extra Facings Full Depth in Use, No Wasted Space Safe, Ergonomic Picks Product Always at Pick Point SPAN-TRACK The Patented, Original Full-Width Roller Carton Flow Track 2 1-800-695-SPAN

Low Profile SPAN-TRACK Nests Between Beams Low Profile installs between and behind beams for full use of vertical space at each level. Fits ANY pallet rack available in to-the-inch cut lengths. Drop-In design is easy to add to existing rack or to reslot without tools. Span-Track Hangers are placed onto front and rear beams to support each Low Profile track. Front hanger is a carton stop. Rear hanger absorbs loading impact. HANGERS available for ALL beam types. Hangers include built-in label holder, labels and end caps. 98H1 98H2 98H3 98H4 1 5 8 1 5 8 2 9 16 2 1 2 Step Beam Hanger 2 13 6 2 3 4 Step Beam Hanger 1 7 16 3 Structural 4.1# Channel Beam Hanger 1 5 8 4 Structural Channel Beam Hanger 98H6 98H7 98H8 98H0 Place Hangers. Add Track. TwoSteps.OneWorker.NoTools. 1 3 4 4 1 3 4 Box Beam Hanger 1 3 4 4 1 3 4 Bridge Hanger for Box Beams 1 2 Bridge Hanger for 3 Structural 4.1#/ft. Beam 2 11 1 1 8 +1 6 Custom Hanger for Step & Box Beams Low Profile CAPACITIES & LENGTHS Unsupported spans up to 10 ft. are possible, depending on product weight. The between beam dimension (BBD) determines the Low Profile track length. BBD equals the level distance between the front and rear pallet rack beams. Between Beam Dimension (Unsupported Span) UNSUPPORTED SPAN 3 0 7 0 8 0 9 0 10 0 Span-Track LOAD CAPACITY 50 lbs/ft 40 lbs/ft 30 lbs/ft 20 lbs/ft Low Profile Knuckle LOW PROFILE CROSS SECTION Nominal Width 2 1 8 (Actual track width 2 5 16 is 3 / 4 greater than nominal) Overall Width TOP OF ROLLER REAR Low Bar Each-pick made Easy Low Profile Knuckle takes the best of standard Low Profile Span-Track and adds an extra angle which improves visibility, access and accuracy at the pick point. The track does it all without altering or adding to rack structure, and without extending into precious aisle space. Rollers at front of track should be lower than top of beam, which acts as a stop. FRONT High Bar 1 UNEX The Authority on Carton Flow 3

SPAN-TRACK 3D Span-Track 3D CAPACITIES & LENGTHS Unsupported spans of up to 12 ft. are possible, depending on product weights. Between beam dimension (BBD) determines 3D track length required measure level distance between front and rear pallet rack beams. Span-Track CAPACITIES & LENGTHS UNSUPPORTED SPAN 7-10 11 12 CAPACITY PER FOOT 50 lbs/ft 35 lbs/ft 25 lbs/ft Span-Track 3D for heavier loads on longer unsupported spans. Span-Track 3D, a Low Profile model, with a 3 deep side channel (14 gauge galvanized steel) carries loads up to 50 lbs. per ft. on 10 unsupported spans. It has 3/4 diameter rollers with a full length 3/16 axle. Span-Track 3D installs between pallet rack beams. Saves vertical space for high density live storage. Order to-the-inch cuts to fit existing footprint. Uses 2 standard Span-Track Hangers per 3D section. 3 CHANNEL HEIGHT 3D CROSS SECTION Nominal Width (6, 9, 12, & 15 widths available) 3 3 16 TOP OF ROLLER Overall Width (Actual track width is 1 1 4 greater than nominal) Low Profile EXTRAS & APPLICATIONS Bridge Splice Two special Low Profile Span-Track sections can be joined end-to-end for extra deep carton flow. With an additional beam supporting the splice, capacity and superior flow are maintained from load point to pick point. TRACK WIDTH Span-Track provide excellent product tracking no guide rails are needed. Cartons with firm flat bottoms may be wider than track section. ROLLER CENTERS Cartons with firm flat bottoms will flow properly if supported by at least three rollers. Poor bottoms or heavier weights may require closer roller spacing for proper flow. CARTON WIDTH CARTON LENGTH Track Width Roller SPAN-TRACK MAXIMUM Centers WIDTH CARTON WIDTH MINIMUM MAXIMUM 6 9 CARTON ROLLER 9 13 1 /2 LENGTH CENTERS 12 18 6 1 15 22 1 /2 9 2 12 3 PITCH Required pitch varies with carton quality and weight. 1 per foot is recommended, but testing with actual product should be done at installation. Span-Track in single or double deep pallet racks requires no shelves or intermediate supports. Span-Track maintains all the features and capacity of your pallet rack and mezzanine. 4 1-800-695-SPAN

Each Pick Solutions: Pick Tray Pick Tray Presents a New Angle Combined with Span-Track s superior carton flow, full baywidth, adjustable Pick Tray maximizes view and access in each pick applications. Tilted product presentation greatly improves pick rate and accuracy. Bridge Hangers are used on the beam where Span-Track sections meet Pick Tray. Drop-In design makes installation easy. Cartons must be 6 or longer. Galvanized steel Pick Tray is rated at 50 lbs./ft. Angle adjusts from 15 to 35 degrees. Pick Tray widths available from 5 ft. to 10 ft. in 6 increments. 18 and 24 deep trays are standard, with a 2 or 4 front stop. Optional label holder attaches to tray front. BRIDGE HANGER PICK TRAY (Side View) 18 or 24 3-4.1# STRUCTURAL BEAM Adjust angle from 15º to 35º by relocating support pins. At 15º tray extends 3 5 8 beyond front upright. At 35º tray extends 1. 35º 30º SUPPORT PIN 15º 4 15 16 9 9 16 11 VERTICAL DISTANCE FROM TOP OF BEAM TO LOWEST POINT OF PICK TRAY 1 EXTENTION 1 3 OF PICK TRAY 4 BEYOND 3 5 8 FRONT UPRIGHT and Add-On Tray UNEX The Authority on Carton Flow 5

High Profile SPAN-TRACK High Profile Model installs on any pallet rack beam. Track can overhang beams for increased storage space and contouring of racks. Ideal for loose pick applications. Fully adjustable left, right, front and back. Retainer Angle is a 14 gauge galvanized strip that attaches to full length of front and rear beams. Lock Arm secures Span- Track to the rear beam Retainer Angle and prevents any accidental movement. Simple lock/unlock action enables one person to easily adjust or relocate track without tools. Track is adjustable front to back and left to right, either flush or with overhang. OUTSIDE OF RACK (FRONT & REAR) LOCKED UNLOCKED Front and Rear End Features: Front end of High Profile Span-Track acts as a raised carton stop. Rear end has a load bar to absorb impact loading. Both ends have 2 label holders built in. Flush vs. Overhang vs. Contour. Track can overhang rack at front and rear. Pick face profile can be straight or contoured. Most full case picks use a straight face. Loose picks use a contoured face each level has less overhang than the one below for a stepped effect, optimizing product visibility and access. In applications with pallet storage above Span-Track a flush face (no overhang) is recommended to avoid damage to track by fork trucks while loading and unloading pallets. High Profile Knuckle Overhang with an Angle This is High Profile Span-Track with a Knuckled front end, angled 15. Carton tilts toward the picker for excellent visibility and access. Perfect for loose pick applications where front end overhang is desirable. The knuckled section is available in three lengths and does not add to overall track length. Figure lengths the same as for straight High Profile NOTE: Entire Knuckle must extend beyond front beam. KNUCKLE LENGTH 12 16 20 24 MAX.CARTON LENGTH 15 20 25 30 6 1-800-695-SPAN

CARTON REAR IMPACT BAR.911 FRONT END STOP High Profile CAPACITIES & LENGTHS Unsupported spans of up to 10 ft. are possible, depending on product weights. High Profile can overhang beams at front, back or both ends. Measure (level) the distance from outside the front beam to outside the rear beam to find the out-to-out dimension. High Profile track length must exceed this dimension. Unsupported Span Out-to-Out Beam Dimension Measure level distance from outside to outside of front & rear beams to determine track length required. Track must exceed out-to-out dimension of rack. UNSUPPORTED TRACK MAX. TRACK OVERHANG SPAN CAPACITY/FT. (HIGH PROFILE) 3 0 50 lbs/ft 1 0 4 0 50 lbs/ft 1 0 5 0 50 lbs/ft 1 4 6 0 50 lbs/ft 1 8 7 0 50 lbs/ft 1 8 8 0 40 lbs/ft 2 0 9 0 30 lbs/ft 2 0 10 0 20 lbs/ft 2 0 Profiling racks is easy with a combination of Low & High Profile Span-Track. Pick access and visibility are maximized. Typical Loose Pick Application. Contour profile with Knuckled End option added to High Profile Span-Track. UNEX The Authority on Carton Flow 7

Deck SPAN-TRACK Drop-in carton flow track for single deep pallet rack Drops Between Beams Do-it-yourself installation. Deck Span-Track drops onto the beams of your pallet rack for instant, ready-toroll live storage. No shelves, hangers, or retainers. Adjust beams and add track. One worker, no tools, no complications. Cartons Always Flow to Front Like Low and High Profile Span-Track, Deck Span-Track keeps cartons on track, up front and easy to retrieve. Maximizes Density Vertical spacing of track levels is dictated only by the height of the products on each level. With this space brought to a minimum, the usable carton storage volume of your rack is dramatically increased over traditional static storage. FULL WIDTH ROLLERS 3/4 diameter aluminum rollers with galvanized steel axles. Rollers are full width of track 6, 9, 12 or 15 with roller spacings of 1, 2 or 3 on center. Nominal Width Unique End Cut fits onto standard beams Built-in Stop & Label Holder at both ends 2 5 16 1 5 16 (Actual track width is 3/4 greater than nominal) Overall Width 8 1-800-695-SPAN

ShelfTRACK Upgrade Carton Flow by Replacing Plastic Wheel Lanes in Existing Rack & Shelves No product relabeling. No reconfiguring SKUs. No changes to pick-to-light. No more jam-ups! BEFORE ShelfTRACK AFTER ShelfTRACK FITS YOUR SHELVES ShelfTRACK carton flow is the original full-width-roller track that replaces existing plastic wheel tracks. Drop-In design for fast, easy installation in your flow rack shelves. ShelfTRACK full-width rollers provide total carton support and superior flow. Rugged steel side channels and axles, and aluminum rollers withstand tough handling in any environment. Backed by a 7-Year Warranty. ShelfTRACK eliminates the high cost of replacing damaged plastic wheel tracks without altering your shelves or rack structure. NOTE: Adding ShelfTRACK sections to Kingway shelves may require shelf modification. Check with your Unex representative. Eliminate Plastic Wheel Failure Rugged ShelfTRACK just Keeps on Flowing Replace your plastic wheels just ONE MORE TIME. TRACK LENGTH ShelfTRACK sections are available in to-the-inch cut lengths from 3-12. To determine track length required, measure the length of the plastic wheel lanes to be replaced, or measure the clear distance between the inside of shelf s back angle and the inside of the front angle. Sections can be spliced end-to-end to create longer runs. TRACK WIDTH Available 6, 9, 12, & 15 wide. Cartons may wider than track section. Nominal Width 3/4 Diameter Roller O h is 1/2 o inal) MINIMUM CARTON LENGTH 6 9 12 CARTON LENGTH Roller Centers MAXIMUM ROLLER CENTERS 1 2 3 1 3 8 ShelfTRACK WIDTH 6 9 12 15 CARTON WIDTH Track Width MAXIMUM CARTON WIDTH 9 13 1 /2 18 22 1 /2 ROLLER CENTERS Cartons with firm flat bottoms flow well when supported by four rollers. Imperfect bottoms or heavy weights may require closer roller spacing. PITCH Recommended pitch is 1 inch per foot. Test for product flow. GUIDE RAILS Guide rails are not required with Shelftrack, but can be left in place if desired. UNEX The Authority on Carton Flow 9

Carton Flow By-the-Bay 10 1-800-695-SPAN

UNEX The Authority on Carton Flow 11

Patented Span-Track is manufactured by Unex and is backed by a 7-Year Warranty. Unex has been manufacturing carton flow products since 1964. A nation-wide network of distributors sells Span-Track and the other items in the Unex carton flow line. UNEX MANUFACTURING, INC. 50 PROGRESS PLACE, JACKSON, NJ 08527 908-928-2800 1-800-695-SPAN FAX: 908-928-2828 span@unex.com www.unex.com The Authority on Carton Flow 1/03