CONTENTS POLYETHYLENE 4 Low-density polyethylene 4 Polyethylene compositions for the cable industry 5 POLYPROPYLENE 7 Polypropylene manufactured by LLC NNP Neftekhimiya 7 Polypropylene manufactured by LLC Tomskneftekhim 8
AFFILIATE COMPANIES OF SIBUR S POLYMER BUSINESS
LDPE POLYETHYLENE Properties 15803-020 Low-density polyethylene GOST 16337-77, rev. 1, 2, 3 15303-003 Density, g/cm 3 0.9190 ± 0.002 0.9205 ± 0.0015 Melt Flow Index (rated value) to a tolerance of %, g/10 min MFI dispersion within the batch limit, %, max Number of inclusions, pcs, max Tensile strength at yield, MPa (kgf/cm 2 ), min Tensile strength at break, MPa, (kgf/cm 2 ), min 2 ± 25 0.3 ± 30 ±6 ±6 2 2 93 х 10 5 (95) 98 х 10 5 (100) 113 х 10 5 (115) 137 х 10 5 (140) Elongation at break, %, min 600 600 Extractives, %, max 0.4 0.4 Film appearance test А, В А, В Taste and odor of aqueous extract, points, max Environmental Stress Cracking Resistance (ESCR), h, min 1 1 500 For the production of film, technical articles, hoses, fittings and packaging materials 4
POLYETHYLENE Polyethylene compositions for the cable industry Properties 153-01K 153-02K 153-10K GOST 16336-77, rev. 1, 2, 3 Density, g/cm 3 0.9185 0.922 0.9185 0.922 not rated Melt Flow Index, g/10 min 0.21 0.39 0.21 0.39 0.21 0.39 MFI dispersion within the batch limit, %, max ± 8 ± 8 ± 8 Number of inclusions, pcs, max 3 2 not rated Environmental Stress Cracking Resistance (ESCR), hrs, min 500 500 500 Extractives, %, max 0.5 0.5 0.5 Tensile strength at yield, MPa (kgf/cm 2 ), min Tensile strength at break, MPa, (kgf/cm 2 ), min 9.8 (100) 9.8 (100) 9.8 (100) 137 х 10 5 (140) 137 х 10 5 (140) 137 х 10 5 (140) Elongation at break, %, min 600 600 600 For the application of insulation, coverings and protective coatings of wires and cables by extrusion 5 LDPE
LDPE
POLYPROPYLENE Polypropylene manufactured by LLC NNP Neftekhimiya Properties 01025 01030 01250 Melt Flow Index, g/10 min 2.6 3.3 2.9 3.5 23 27 Volatiles, %, max 0.09 0.09 0.09 Tensile strength at yield, MPa (kgf/cm 2 ), min 34 34 Elongation at yield, %, not less than 10 10 Isotactic stream %, min 93 BOPP film General purpose Moulded articles 7 PP
PP POLYPROPYLENE Polypropylene manufactured by LLC Tomskneftekhim. Homopolymer Properties PP H020 GP PP H030 GP PP H030 GP b PP H040 GP Melt Flow Index, g/10 min 1,5-2,5 2,5-3,5 2,5-3,5 3,5-5,0 General purpose Properties PP H060 GP PP H080 GP PP H120 GP PP H180 GP PP H250 GP PP H300 GP PP H400 GP Melt Flow Index, g/10 min 5,0-7,0 7,0-10 10-15 15-20 20-30 25-35 35-45 General purpose Properties PP H033 FF PP H034 FF PP H121 FF PP H230 FF PP H233 FF PP H270 FF Melt Flow Index, g/10 min 2,9-3,5 2,9-3,5 10-15 21-25 21-25 25-30 Film thread (raffia), carpet base, bags, big bags Fibers Fibres, nonwovens Properties PP H273 FF PP H353 FF PP H234 FF PP H274 FF PP H354 FF PP H003 EX 8 Melt Flow Index, g/10 min 24-29 30-40 21-25 24-29 30-40 0,20-0,40 Fibres, nonwovens Fibers, nonwovens, agrotextile Non-pressure pipes, sheets
POLYPROPYLENE Polypropylene manufactured by LLC Tomskneftekhim. Homopolymer Properties PP H004 EX PP H007 EX PP H013 EX PP H013 EX b PP H018 BM Melt Flow Index, g/10 min 0,20-0,40 0,40-0,90 0,90-1,6 0,90-1,6 1,6-2,2 Non-pressure pipes, sheets Non-pressure pipes, ribbons, sheets, fittings Ribbons, sheets, fittings Ribbons, sheets, fittings, geogrid Blowing, extrusion, thermoforming Properties PP H032 TF PP H031 BF PP H035 BF Melt Flow Index, g/10 min 2,9-3,4 2,9-3,3 2,9-3,3 Thermoforming, extrusion, injection molding Biaxially-oriented metallized film, thermoforming, film thread (raffia) Properties PP H065 CF PP H085 CF PP H086 CF PP H022 CM Melt Flow Index, g/10 min 5,5-7,5 7,5-9,5 7,5-9,5 1,9-2,4 Films Metallized film Caps. Compression injection molding including сast-film Properties PP H180 IM PP H251 IM PP H351 IM PP H451 IM PP H252 IM PP H352 IM PP H452 IM 9 Melt Flow Index, g/10 min 15-20 23-27 30-40 40-50 23-27 30-40 40-50 Injection molding, Injection molding, transparent packaging sturdy packaging PP
PP POLYPROPYLENE Polypropylene manufactured by LLC Tomskneftekhim. Stat-copolymer Properties PP R003 EX PP R007 EX PP R007 EX w PP R015 BF PP R020 BM PP R030 BM Melt Flow Index, g/10 min 0,20-0,40 0,40-0,90 1,2-1,8 1,8-2,5 2,5-3,5 Pressure Pipes class PPR80 Pressure pipes, fittings tubular film Extrusion blow molding, transparent sheets Extrusion blow molding, thermoforming Properties PP R065 CF PP R085 CF PP R100 CF PP R125 IM PP R250 IM PP R350 IM PP R450 IM PP R600 IM Melt Flow Index, g/10 min 5,0-7,5 7,5-9,5 9,0-11 10-15 15-25 25-35 35-50 50-65 Films Injection blow molding, injection molding "Injection molding, transparent packaging" 10
SIBUR Holding CJSC 16/1 Krzhizhanovskogo Str, Moscow, GSP-7, 117997, Russia tel.: +7-495-777-55-00 fax: +7-495-718-90-65 e-mail: info@sibur.ru www.sibur.ru SIBUR LLC Beijing Representative Office tel.: +86-10-85679790 fax: +86-10-85679792 e-mail: sibur_china@yahoo.com.cn www.sibur.ru / www.siburchina.cn SIBUR International Gesellschhaft m.b.h. 8 Nussdorfer, Vienna, 1190, Austria tel.: +43 1 370 8000 fax: +43 1 370 80020 www.sibur-int.com