MATERIAL SAFETY DATA SHEET E Coast Hwy #143 Corona Del Mar CA United States of America

Similar documents
SAFETY DATA SHEET Rainguard Advanced Waterproofer 10 TPC 000, 0005, 0700, 0701, 0702, 0703, 0704, 0800, 0801, 0907

SAFETY DATA SHEET Rainguard Advanced Tinted Waterproofer TPC 0117, 0113, 0114, Surveyor Circle Huntington Beach, CA 92646

MATERIAL SAFETY DATA SHEET E Coast Hwy, #143 Corona del Mar CA United States of America

Version /27/2006

Version /28/2006

HOJA DE SEGURIDAD DE PRODUCTO

MATERIAL SAFETY DATA SHEET

Part Numbers: SA-12C Hazard Rating: Health: 1 Fire: 4 Reactivity: EISENHOWER LANE NORTH LOMBARD, IL 60148

MATERIAL SAFETY DATA SHEET

Version /05/2007

MATERIAL SAFETY DATA SHEET 1. Product and Company Identification

M A T E R I A L S A F E T Y D A T A S H E E T

1. Chemical Product and Company Identification. 2. Hazardous Ingredients

TopCoat CRT White. Material Safety Data Sheet. Updated: 12/08. Quality You Can Trust Since From North America s Largest Roofing Manufacturer

Material Safety Data Sheet

Material Safety Data Sheet

CONCRETE BONDING ADHESIVE

1. Product And Company Identification

Chemical Name: Contact Cement. Manufacturer: Ace. Container size:.473l. Location: VLA. Disposal: Place empty container in trash.

Material Safety Data Sheet

*MATERIAL SAFETY DATA SHEET*

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Aardvark Colors 245 Kent Ave Brooklyn, NY

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification

BIG SEXY HAIR COLOR SAFE VOLUMIZING SHAMPOO

Material Safety Data Sheet

December 27, 2012 Page 1 of 5 MATERIAL SAFETY DATA SHEET

PATCHCRETE Acrylic Polymer #1003

MATERIAL SAFETY DATA SHEET

PENETRATING CONCRETE SEALER

Material Safety Data Sheet

June 29, 2006 Page 1 of 5 MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification

II. COMPOSITION/INFORMATION ON INGREDIENTS OSHA HAZARDOUS COMPONENTS (29 CFR ) Exposure limits 8 hrs. TWA (ppm)

MATERIAL SAFETY DATA SHEET FILE NO.: 070 AIRTITE CLEAR SILICONIZED ACRYLIC CAULK MSDS DATE: SUPERCEDES:

Material Safety Data Sheet

Material Safety Data Sheet Oil-Dri Sweeping Compound (# )

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification

FASC-Tac 845-P. South Coast Specialty Chemicals LLC 1710 Commerce Drive Piqua, OH Account: South Coast Specialty Chemicals:

1. PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON REGULATED INGREDIENTS

MATERIAL SAFETY DATA SHEET

Medical Emergency Phone Number (24 Hours): Transport Emergency Phone Number (CHEMTREC): PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET

GHS Classification: 1. PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A

LOS DATOS DE SEGURIDAD DEL PRODUCTO PUEDEN OBTENERSE EN ESPANOL SI LO REQUIERE.

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Wynn s Transformer AT Automatic Transmission Fluid

MATERIAL SAFETY DATA SHEET Beta Titanium SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Page 1. Safety Data Sheet Product: 372 Synthetic Cutting Fluid (Liquid)

M A T E R I A L S A F E T Y D A T A

U.S. SAFETY DATA SHEET Howes Lubricator Diesel Treat Page 1 of 6

IV. FIRST AID MEASURES EYE: Immediately flush eyes with water for at least 20 minutes. Get immediate medical attention.

SCOOTER 4T. Version: 1.2 Released: Revision Date:

Bel-Ray Company, Inc. Material Safety Data Sheet

: EUCLID NS GROUT - 50 LB BAG

MATERIAL SAFETY DATA SHEET

2602 FLORIDA PURPLE PEC

MATERIAL SAFETY DATA SHEET Lloyds Laboratories Inc. Cold Galvanizing Zinc Rich Primer (Aerosol) Part # 21214

SAFETY DATA SHEET Pump Flush

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification. 2. Hazards Identification

Material Safety Data Sheet

SAFETY DATA SHEET 10X Wash Buffer

Product Name: PUNCTURE SEAL INSTANT TIRE REPAIR (UPC: )

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

Material Safety Data Sheet

SAFETY DATA SHEET Buffer B1

FOSTER Print Date: SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE PRODUCT AND SUPPLIER

MATERIAL SAFETY DATA SHEET

Barristo Enterprises, Inc. dba SureHold

W2388BASE PLASTIC ERASER COMPOUND

MSDS. An Alco Industries Company CHEMTREC: Nova Drive SE Massillon, OH PH FAX

Butyric Acid, Sodium Salt

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

* * * Section 1 - Product and Company Identification * * *

MATERIAL SAFETY DATA SHEET WYNN'S PROFESSIONAL PRODUCTS AUTOMATIC TRANSMISSION FLUSH

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

Dynatex Anti-Seize & Lubricating Compound. Phone Emergency Phone Fax (270) (800) (270) CHEMTREC

Material Safety Data Sheet Product No , Cutting Fluid, Soluble Oil Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

RAID MAX SPIDER & SCORPION KILLER

Product Name: Phone: Items: Formula Code: EPA Reg. No

MATERIAL SAFETY DATA SHEET

Transcription:

Hazards Rating: Health: 1 Slight Flammability: 0 Least Reactivity: 0 Least Personal Protection: A Safety Glasses SECTION I MANUFACTURER INFORMATION MANUFACTURER: Weatherman Products, Inc 3334 E Coast Hwy #143 Corona Del Mar CA 92625 United States of America PHONE: (949) 515-8800 (866) 989-5159 EMAIL: info@rainguard.com WEB SITE: www.rainguard.com DATE PRINTED: January 1, 2014 SECTION II HAZARDS IDENTIFICATION INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Inhalation exposure may cause dizziness, headaches and even unconsciousness. SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Prolonged skin contact will cause drying and/or defatting of skin tissues leading to irritation and dermatitis. Eye contact may cause irritation and blurred vision. SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Drying and/or defatting of skin. INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. HEALTH HAZARDS (ACUTE AND CHRONIC): The proper use of this paint product does not present any serious health hazards known to the manufacturer. SECTION III HAZARDOUS INGREDIENTS Chemical Name CAS-No. Weight% Range THIS PRODUCT DOES NOT CONTAIN ANY SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR REPRODUCTIVE HARM. There are no chemicals subject to the reporting requirements of Section 313 (SARA Title III) and of 40 CFR 372 1

SECTION IV FIRST AID MEASURES Get immediate medical attention for any significant overexposure INHALATION: Move victim to fresh air. If victim has difficulty breathing, administer oxygen. If breathing has stopped, initiate CPR. Seek immediate medical attention. INGESTION: Never give an unconscious person anything to drink. If conscious, treat for shock. Seek immediate medical assistance or nearest poison control center. If conscious, induce vomiting. If unconscious and vomiting, turn the victim on their side to avoid choking. SKIN CONTACT: Wash exposed areas with soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse. EYES: Flush eyes with running water for at least 15 minutes. Hold eyelids apart to insure rinsing of the entire surface of the eye and lids with water. Seek immediate medical attention. CARCINOGENICITY: NTP: No IARC Monographs: No OSHA Regulated: No SECTION V FIRE/EXPLOSION HAZARDS FLASH POINT: METHOD LOWER EXPLOSION LIMIT: UPPER EXPLOSION LIMIT: AUTOIGNITION TEMPERATURE: EXTINGUISHING MEDIA: HAZARDOUS COMBUSTION PRODUCTS: None Not applicable Not available Not available Not available CO2, dry chemical or water fog. Carbon monoxide and carbon dioxide can form. Smoke, fumes PROTECTIVE EQUIPMENT FOR FIREFIGHTERS: Use accepted fire fighting techniques. Wear full firefighting protective clothing, including selfcontained breathing apparatus (SCBA). If water is used, fog nozzles are preferable. Use water to cool closed containers. FIRE AND EXPLOSION CONDITIONS: SECTION VI - SPILLS/LEAKS/ACCIDENTAL RELEASE MEASURES This product not expected to ignite under normal conditions of use. Remove and eliminate all ignition sources. Control the source of the spill. Ventilate confined spaces. Avoid breathing vapors or mist. Dike and soak up spill with absorbent material such as sand or Fuller Earth. Recover free liquid and absorbent material from spill area and shovel or broom into 2

appropriate chemical waste containers for proper disposal. Persons performing clean up should wear adequate personal protective equipment and clothing. Keep out of storm drains, sewers and waterways. Observe all local, state and federal laws and regulations regarding spills, clean-up, removal, discharge and disposal. SECTION VII - HANDLING AND STORAGE Keep containers tightly closed when not in use. Do not store or handle near heat source, sparks, open flame or strong oxidizing materials. Use and store in only in cool and well-ventilated areas. Care should be taken to prevent moisture condensation in the container. Avoid breathing vapors. Avoid contact with skin. Keep out of the reach of children. SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION The recommendations described in this section are provided as general guidance for minimizing exposure when handling this product. Because use conditions will vary depending upon customer applications, specific safe handling procedures should be developed by a person knowledgeable of the intended use, working conditions and equipment. RESPIRATORY PROTECTION: VENTILATION: PROTECTIVE GLOVES: EYE PROTECTION: PROTECTIVE CLOTHING: INDUSTRIAL HYGIENE: Use in a well ventilated and/or open area. Local exhaust and or mechanical ventilation in confined or poorly ventilated spaces are recommended. Wear neoprene or non-soluble plastic gloves. Use approved splash goggles. Wear long sleeve clothing selected for condition exposure potential. Before eating or smoking, wash hands and face to remove residual contamination. EXPOSURE LIMITS: Chemical name CAS Number Regulation Limit Form SECTION IX PHYSICAL AND CHEMICAL PROPERTIES BOILING POINT: 212 F ph: 6.0-7.0 VAPOR DENSITY (AIR =1): Not determined SPECIFIC GRAVITY (H20 = 1): 1.03 EVAPORATION RATE (ETHER = 1): Not determined 3

MATERIAL V.O.C.: less than 15 g/l SOLUBILITY IN WATER: Dispersible APPEARANCE & ODOR: Colored liquid with mild odor VAPOR PRESSURE (mm HG): SECTION X REACTIVITY/STABILITY SUBSTANCES TO AVOID: STABILITY: HAZARDOUS POLYMERIZATION: Do not mix with other chemicals. Stable. Will not occur. HAZARDOUS DECOMPOSITION OR THERMAL BYPRODUCTS: Carbon dioxide and carbon monoxide SECTION XI - TOXICOLOGICAL INFORMATION No Data Available SECTION XII - ECOLOGICAL INFORMATION No Data Available SECTION XIII - WASTE DISPOSAL CONSIDERATION Do not allow material to contaminate or cause to be discharged into any storm drain, lake, stream, pond, underground water supplies or any body of water. Incinerate and or bury waste and containers at an approved facility. Dispose of waste materials and containers in accordance with all federal, state and local health, safety and environmental regulations. SECTION XIV- TRANSPORTATION/SHIPPING DATA REGULATED BY: United States DOT: Canada (TDG): DOT Proper Shipping Name: UN / NA Number: Hazard Class: Packing Group: Not Regulated Not Regulated SECTION XV - REGULATORY INFORMATION NORTH AMERICAN INVENTORIES: All components listed or exempt from the TSCA inventory. This product or its components are listed on, or exempt from the Canadian Domestic Substances List. 4

CANADIAN REGULATIONS: WHMIS Classification: D2A This is a controlled product under the Canadian Workplace Hazardous Materials Information System (WHMIS) This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. OTHER REGULATIONS: Regulatory VOC (less water and exempt solvent) <15 g/l SECTION XVI - OTHER INFORMATION HMIS RATING: 0 = Minimum 1 = Slight 2 = Moderate 3= Serious 4= Severe LEGEND ACGIG - American Conference of Governmental Hygienists TSCA - Toxic Substances Control Act OSHA - Occupational Safety and Health Administration MSHA - Mine Safety Health Administration DOT - Department of Transportation TWA - Time Weighted Average PEL - Permissible Exposure Limit NDSL - Non-Domestic Substance List DSL - Domestic Substance List V - Volume RCRA - Resource Conservation and Recovery Act NIOSH - National Institute for Occupational Safety Health EPA - Environmental Protection Agency VOC - Volatile Organic Compound STEL - Short Term Exposure Limit NTP - National Toxicology Program HMIS - Hazardous Materials Information System WHMIS - Workplace Hazardous Materials Information System TLV - Threshold Limit Value IARC - International Agency for Research on Cancer The information contained in the document relates to the specific material designated and may not be valid for such material used in combination with any other material or in any process. Such information is to the best of our knowledge and belief accurate and reliable as of the date compiled. However no representation, warranty or guarantee, is made as to its accuracy reliability or completeness. It is the user is responsibility to satisfy himself as to the suitability and completeness of such information for their own particular use. We do not accept liability for any loss or damage that may occur from the use or reliance upon this information. 5

<< END >> 6