STOCK CATALOGUE US VERSION
HOW TO SPECIFY AND ORDER Aluminum Stairnosings Supplied in 8 2, 6 and 4 lengths. When specifying or ordering you need to advise: - Code - Number of lengths required Inserts Supplied in 8 and 82 coils. When specifying or ordering you need to advise: - Color - Optional: if multiple inserts, different colors may be d Examples: - Black 106-2x Black 106, 1x Safety Red 104 (for nosing with triple insert) Aluminum Detail Trims Supplied in 8 2 and 6 lengths. When specifying or ordering you need to advise: - Code - Number of lengths required 2
STAIRNOSING Manufactured from anodized aluminum, Tredsafe nosings are the smart way to finish a stair: hard-wearing and easy to install, these nosings are well designed and neatly finished. Tredsafe have an extensive range of stairnosing profiles available, designed to suit all types of stairs, both inside and outdoors. The profiles are compatible with all stair coverings, as well as uncovered concrete and wooden stairs. Self-adhesive backing for ease of installation Tredsafe anti-slip insert for safety and to conceal fixings: 5 color options Varied product designs to suit all situations Pre-drilled profiles for countersunk screw fixing 12.5 micron anodizing DETAIL TRIM In every flooring installation there are junctions where different types of flooring or wall coverings meet. For floors, the Tredsafe range of anodized aluminum detail trims reduces the trip hazard of these junctions while providing an attractive, hard-wearing finish. For walls, Tredsafe s aluminum trims provide a durable, easy clean finish. CUSTOM DESIGN For special project requirements Tredsafe can design and manufacture profiles to individual requirements. This service includes concept design and 3D printed samples. Minimum order quantities apply. Please contact us for more information. Tredsafe is designed and manufactured in New Zealand. 3
STAIRNOSING CARPETED AA121 1 x 2 1/8 insert 1 1/2 bullnose drop on riser 1 1/2 2 3/5 AA123 1 x 2 1/8 insert 1 7/8 right angle drop on riser AA345 Suitable for interior and exterior 3 x 1/2 inserts - can be ordered in different colors 1 3/8 bullnose drop on riser AA346 Suitable for interior and exterior 3 x 1/2 inserts - can be ordered in different colors 1 3/8 right angle drop on riser 4
STAIRNOSING CARPETED UP121 Rigid PVC Black Suitable for interior only 1 x 1 11/16 insert 1 27/64 bullnose drop on riser 5
STAIRNOSING UNCOVERED AA125 1 x 2 1/8 insert Ramped back edge to avoid trip hazards on uncovered stairs 1 rake back drop on riser AA139 1 x 1/2 anti-slip insert Ramped back edge to avoid trip hazards on uncovered stairs 3/8 drop on riser AA207 Suitable for interior and exterior 2 x 1 3/4 anti-slip insert Ramped back edge to avoid trip hazards on uncovered stairs 1 3/8 universal drop on riser 1 3/8 4 3/8 6
STAIRNOSING VINYL AA106 1 x 1 3/4 anti-slip insert Butt join to vinyl 1 1/4 right angle drop on riser 1 1/4 2 1/2 AA114 1 x 1 3/4 anti-slip insert Butt join to vinyl 1 right angle drop on riser STAIRNOSING CERAMIC TILE AA351 3 x 1/2 anti-slip inserts - can be ordered in different colors Suitable for 3/8 to 1/2 thick tiles 7
DETAIL TRIM CARPET / VINYL TRANSITIONS DT022 3/16 (5mm) floorcoverings to carpet DT023 Pre-cuts made to allow for curving in either direction 3/16 (5mm) floorcoverings to carpet height transitions DT024 1 x 1/2 insert Provides a gradual ramp Suitable for 1/8 (3mm) height variations Suitable for high traffic flow areas Supplied pre-drilled for screw fixing DT027 1 x 1/2 insert Provides a gradual ramp Suitable for 1/16 (2mm) height variations Suitable for high traffic flow areas Supplied pre-drilled for screw fixing 8
DETAIL TRIM CARPET / VINYL TRANSITIONS DT029 1 x 1/2 insert Protective ramped transition between even height floorcoverings Suitable for high traffic flow areas Supplied pre-drilled for screw fixing DT030 1/16 (2mm) floorcoverings to carpet DT035 Pre-cuts made to allow for curving in either direction 1/16 (2mm) floorcoverings to carpet DT033 1/8 (3mm) floorcoverings to carpet 9
DETAIL TRIM CARPET / VINYL TRANSITIONS DT034 Pre-cuts made to allow for curving in either direction 1/8 (3mm) floorcoverings to carpet DT036 Mill finish aluminum Subtle join 1/16 (2mm) vinyl to carpet DT037 Mill finish aluminum Pre-cuts made to allow for curving in either direction Subtle join 5/64 vinyl to carpet DT038 Mill finish aluminum Subtle join 1/8 (3mm) vinyl to carpet Can also be d as carpet finishing border 10
DETAIL TRIM CARPET / VINYL TRANSITIONS DT039 Mill finish aluminum Pre-cuts made to allow for curving in either direction Subtle join 1/8 (3mm) vinyl to carpet Can also be d as carpet finishing border DT040 Mill finish aluminum 1/16 (2mm) vinyl to carpet Ramped base for easy installation DT084 Mill finish aluminum Ramped to create a transition ramp between cushion back carpet and tiles 5/16 3 1/8 11
DETAIL TRIM CARPET & VINYL / BARE FLOOR TRANSITIONS DT028 1 x 1/2 insert Provides a gradual ramp Suitable for 3/16 (5mm) height variations Suitable for high traffic flow areas Supplied pre-drilled for screw fixing DT031 Suitable for carpet to bare floors DT032 Suitable for carpet to bare floors DT064 Designed for with LVT Suitable for 3/16 to 1/4 (5 to 5.5mm) floor coverings to bare floors 12
DETAIL TRIM CARPET & VINYL / BARE FLOOR TRANSITIONS DT066 Pre-cuts made to allow for curving in either direction Designed for with LVT Suitable for 3/16 to 1/4 (5 to 5.5mm) floor coverings to bare floors DT065 Designed for with LVT Suitable for 1/8 (3mm) floor coverings to bare floors DT067 Pre-cuts made to allow for curving in either direction Designed for with LVT Suitable for 1/8 (3mm) floor coverings to bare floors 13
DETAIL TRIM FLOOR / WALL JUNCTIONS DT059 Provides a finished edge to coved 1/16 (1.5 or 2mm) floor vinyl Small end taper gives a flush finish to the vinyl 1 1/4 3/16 1/16 DETAIL TRIM CONSTRUCTION JOINTS DT025 Use with 5/64 vinyl Vinyl or 2 1/8 insert can be installed in the recess space Supplied pre drilled on one side of recess DT026 Use with direct stick carpet or carpet tile Carpet is installed in the recess space Supplied pre drilled on one side of recess 14
INSERTS COLORS Tredsafe inserts have a unique raised pyramid texture which provides exceptional multidirectional slip resistance. Each insert is supplied with a pre-applied, self-adhesive backing tape for ease of installation and concealment of fixing screws for a neat and tidy job. All Inserts are available in 1/2, 1 1/2, 1 3/4 or 2 1/8 widths. 118 Signal Yellow 106 Neutral Black 107 Charcoal Grey 109 Rich Brown 120 Lumitred 120 Lumitred Glowing 15
INSERTS LUMITRED Tredsafe inserts have a unique raised pyramid texture which provides exceptional multidirectional slip resistance. Each insert is supplied with a pre-applied, self-adhesive backing tape for ease of installation and concealment of fixing screws for a neat and tidy job. The Lumitred range provides the ultimate solution in reduced light conditions. Utilizing phosphorescent pigments the inserts are charged by natural or artificial light and activate instantly in failing light conditions. Lumitred inserts are available in 1/2, 1 1/2, 1 3/4 or 2 1/8 widths. APPLICATIONS Emergency exits for commercial or multi-residential buildings Guidance / way finding Supporting the visually impaired Theatres Stadia FEATURES Dark Daylight Lumitred is an environmentally better choice as it is completely free of PVC - reducing environmental impact. The glow pigment is co-extruded into the product giving it increased lifespan and allround glow performance - Tested in accordance to Section 34, UL1994 Standard for Safety Luminous Egress Path Marking Systems and sections of ASTM E2073-02. Visual acuity test conducted up to 300 minutes which is over 3 times the test requirement. 16
INSTALLATION INSERT Step 1 Ensure the aluminum channel is clean from dust, residues and debris. Wipe down with a cleaning solvent (Isopropyl Alcohol or similar). Step 2 Pre cut the insert to your required length. Step 3 Remove the adhesive backing liner from the Tredsafe insert. Step 4 Install by placing the insert into the nosing and pressing into place without undue stretching. Step 5 Once in place, roll over the insert to ensure consistent adhesion and a secure bond. 17
TECHNICAL DATA SHEET INSERT Product Description Special Properties Fields of Application Tredsafe inserts are manufactured from a special blend of PVC, silica quartz and polymeric plasticiser giving an homogeneous hard wearing anti-slip flooring for wet and dry conditions. (Meets British Standard for Sheet Vinyl and Vinyl Tiles BS3261:1973). Tredsafe insert is resistant to attack from ultraviolet light, oil, grease, petrol, salt, dilute acids and alkalis, common hohold chemicals and detergents. Organic solvents will soften Tredsafe insert. Suitable for interior or exterior. Technical Data Description Values Residual Indentation 2.5mm dial gauge Mean 0.05mm Dimensional Stability 176 F for 6 hours Moisture Movement 73.4 F for 24 hours Elastic Property Tensile Strength Heat Ageing 158 F for 15 days Wear Resistance Taber Abrader Slip Resistance DIN 51130:2010 Slip Resistance BS 7976.2:2002 Flammability AS 1530.3:1982 Reaction to Fire ISO 9239.1:2003 Dimensions Other sizes available on request. Exudation Color Change 1kg load H18 wheel @ 60 rpm Inclined Platform Test Pendulum Test - Dry Pendulum Test - Wet Flame Spread Smoke Development Mean Critical Radiant Flux Mean Smoke Development Rate Insert widths Rolls Thickness Weight/ft 2 0.12% 0.02% 2.48mj/m³ None None 1000 revs. 0.6gm weight loss R11 PTV average 57 PTV average 47 0 7 10.3kw/m² 85 percentage minutes 1/2, 1 1/2, 1 3/4, 2 1/8 1 1 3/4 x 82 1/8 9lb 14.7oz 18
TECHNICAL DATA SHEET NOSING Aluminum Component Under normal conditions the extruded aluminum sections are extremely durable, but the following should be taken into account when specifying: Aluminum is attacked by alkali in some mortars and plasters in wet conditions Electrolytic corrosion is likely when in contact with some metals, particularly copper, copper alloys, iron and steel. Although it is not affected by most timbers, corrosion is very likely when in contact with wet timber, such as Western Red cedar, Douglas fir and oak. PVC Component Extremely durable and unaffected by most chemicals in common. The UP series of stair finishes are unaffected by insects and will not support the growth of fungi, moulds or bacteria, resistant to normal thermal loading and ultraviolet, however they are not recommended for outdoors. Installation It is recommended to a polychloropene type contact adhesive in conjunction with mechanical fasteners. Stainless steel screws must be d for exterior or wet installations. We supply all profiles pre-drilled for counter-sunk screws at 200mm centres. Ideally, damaged or badly worn steps should be repaired prior to fixing the Tredsafe stair finishes. When using a contact type adhesive to provide a firm bed it is important to depress the nosing into the adhesive beads then remove immediately, allowing for solvent evaporation. The Tredsafe stair finish is re-positioned and the screws then installed. Installation of the Tredsafe insert is achieved by removing the backing paper and then pressing firmly into the profile. Information given in this data sheet is based on the current state of knowledge. This does not exempt the purchaser from carrying out his own careful inspections of incoming goods and their suitability for local building codes. We reserve the right to make changes to the product data in the course of technical progress or due to operationally related further development. Owing to factors beyond our control during application, recommendations given in this data sheet require tests and experiments by the customer. Our recommendations do not exempt the customer from the obligation to check any infringements of thirdparty rights himself and eliminate them if necessary. The suggestions for product are not equivalent to a warranty of its suitability for the recommended purpose. Each new release of this data sheet supersedes the previous one. 19
20 Refer to website for distributors