We are now one the largest companies in Australia that supply high quality Australian Made Solar Panel Mounting Kits. We manufacture the highest quality Solar Panel Mounting Kits. Unlike our competitors who use aluminum imported materials all Trentleck products are manufactured to the highest level using 100% Australian Made Steel and Marine Grade Stainless Steel to prevent dissimilar metal contact. By using materials of the highest quality and being manufactured in Australia, you can be assured that our kits will stand the test of time. We are proud to announce that we are keeping manufacturing alive in Country Victoria (Gippsland). All our products are manufactured locally. Our Mounting kits are a safe, quick to install and a cost effective method of installing Solar Panel Modules to any surface or structure 100% Australian made and owned company Our products are manufactured using high quality 100% Australian Made Steel and Marine Grade Stainless Steel Manufactured in Rural Victoria Installation time can be reduced by up to 50% There is no need for any on-site drilling or cutting and NO CO² Omissions Panels are held in place using clamps, no need to drill into panel framing which lessens the risk of damage to panels and the risk of voiding panel warranty All modules come with a 10 year warranty Roof mounting kits are certified under the Clean Energy Council Kits can be adjusted from 10 to 50 degrees (North South) Ground and Roof Kits available Save hundreds on concrete and boring of holes Environmentally Friendly Kits are available to suit SilexSolar, BPSolar, Sunpower, Sanyo and many other brands
o Marine Grade Stainless Steel Panel clamps and bolts. o 8mm earth fixing point, patented earth continuity plate o Adjustable from 10 to 50 degrees o Full Certification and CAD Drawings as part of Clean Energy Council (CEC) requirements o Rail sections are used for mounting solar panels onto corrugated, tiled, clip lock roofing or span deck o Can be installed onto flat or pitched roofs o Slots on top and bottom allow for easier installation and added grip when installing clamps o All kits come complete with bolts and screws o Detailed installation manual provided o Special designed rubber footing for roof mount kits o Kits are engineered to comply with Australian Standards for wind zones A,B,C and D o Orders can be placed via our distributor Trentleck Pty Ltd www.trentleck.com
GM10 GM10EXP GM6 GMSF10 GMC10 Model Numbers and Description Ground Mount Ground Mount Single Axis seasonal Adjustment - Stand Alone Unit* Ground Mount Single Axis tracker Expansion Unit* Ground Mount Dual Axis tracker* Super Foundation suit GM10 Foundation Gage to suit GM10 GMSF10+/6 Super Foundation to suit GM10EXP/GM6 GMC10+/6 Foundation Gage to suit GM10EXP/GM6 RMLP2 RMLP3 RMLP4 RMLP5 RMLP6 2.5m rail 3.5m rail 4.5m rail 5.5m rail 6.5m rail Roof Mount Low Profile RMP2 RMP3 RMP4 RMP5 RMP6 2.5m rail 3.5m rail 4.5m rail 5.5m rail 6.5m rail Roof Mount Pitched Roof * GM10/GM10EXP/GM6 has 2 foundation options, please choose Super Foundation or Gage foundations. For certification of product to be valid one foundation option must be chosen, use of alternate foundations will result in certification and warranty being void **Panel Qualities based on panel width of 798mm
SuperFoundation provides a cost effective way to install posts of any size without the need for digging, excavating or concreting. Super Foundation is a specially designed steel plate which secures pins in place to provide the strength needed to hold the posts in place. Installation time is reduced by eliminating the need for digging foundations and concrete setting time. Uprights can be installed immediately. The foundation gage requires a hole of 600mm X 1400mm and needs to be filled with MP32 concrete. GM10 GM10EXP GM6 RMLP RMP Ground Mount X X Roof Mount X X X Mounting Structure SuperFoundation or Foundation Gage* SuperFoundation or Foundation Gage* SuperFoundation or Foundation Gage* Corrugated/ Cliplock/ Tile Corrugated/ Cliplock/ Title Angle (N-S) 10-50 10 50 10 50 N/A 10 50 Adjustable/Fixed Angle (N-S) Either Either Either Fixed Angle Either Tracking (E-W) X X X X Angle Adjustment Method Max. Wind Speed Terrain Category Material Manual or Automated Manual or Automated Manual or Automated N/A Tile Manual 35 m/s 35 m/s 35 m/s 43 m/s 41 m/s 2.0 (N2) 2.0 (N2) 2.0 (N2) 2.0 (N2) 2.0 (N2) Galvanised Steel Galvanised Steel Galvanised Steel Galavanised Steel & Recycled Rubber Galavanised Steel & Recycled Rubber Warranty 10 Years 10 Years 10 Years 10 Years 10 Years
All framing arrays manufactured by AllSolar meet the Clean Energy Council requirements. Although only a small part of Australia is affected by cyclones, all framing arrays are engineered to meet Australian Standards to withstand cyclonic conditions in Zone D Zone C Zone D Zone B Zone A Proudly manufactured by: Trentleck Pty Ltd 422 Narracan Connection Road Narracan Victoria 3824 T +61 3 5634 8248 www.trentleck.com
Warranty AllSolar Pty Ltd ( AllSolar ), warrants to the original purchaser ( Purchaser ) of product(s) that it manufactures ( Product ) at the original installation site that the Products shall be free form defects in material and workmanship for a period of ten (10) years, from the earlier of 1) the date the installation of the Product is completed, or 2) 30 days after the purchase of the Product by the original Purchaser. The warranty does not apply to foreign residue deposited on the finish. All installations in corrosive atmospheric conditions not reasonably found or consented to in normal residential or commercial applications are excluded. This warranty does not cover damage to the Product that occurs during its shipment, storage or installation. The warranty shall be void if installation of the Product is not performed in accordance with AllSolar s written installation instructions and design specifications therein, or if the product has been modified, repaired or reworked in any manner not previously authorized by AllSolar, in writing, or if the product is installed in an environment for which it was not designed. AllSolar shall not be liable for consequential, contingent or incidental damages arising out of the use of the Product by Purchaser under any circumstances. If within the specified warranty period of the Product shall be reasonable proven to be defective, then AllSolar shall repair or replace the defective Product, or any part thereof, in AllSolar s sole discretion. Such repair or replacement shall completely satisfy and discharge all of AllSolar s liability with respect to this limited warranty. Under no circumstances shall AllSolar be liable for special, indirect or consequential damages arising out of or related to use by Purchaser of the product. Manufactures of related items, including but not limited to, PV modules and roofing materials, may provide written warranties of their own. AllSolar s limited warranty covers only its product, and not any related items. Disclaimer AllSoalr shall not be liable for any damages, injury, lack of performance or cancellation of warranties, caused by failure to follow the instructions provided in the user manual or failure to follow the PV Module manufacture s mounting guidelines. AllSolar manuals incorporate safety guidelines and recommendations; however it is not intended to cover all situations. It is the customer s responsibility to meet all local safety requirements, follow standard industry practices and to ensure safety during the installation and commissioning of the system. All efforts have been made to ensure accuracy and completeness of the information provided in manuals; however, AllSolar reserves the right to change the information at any time and assumes no liability for its accuracy. Application AllSolar manuals outline how to assemble the AllSolar Mounting Systems for use with a variety of PV Modules. It does not address specific mounting requirements for different PV Modules. Installers should also consult the module manufacture s mounting and design guidelines for further mounting details. Failure to follow PV module manufacturer s instructions could void the PV module warranty.
1. What Materials are used in the manufacturing Process: All Materials used are high quality100% Australian Product. Kits are manufactured using Marine Grade Steel and NOT aluminum. 2. Will the product rust or fade? No, all Stainless Steel is Galvanised, so as long as the product is installed according to our instructions then the product should not rust or fade. 3. How do our kits save time? By using SuperFoundations t is no need for on-site drilling, cutting or concerting so there is no time wasted waiting for concrete setting time. All kits come complete with all the required components so all you have to do is begin the installation process as per our instructions. 4. How do our kits save you money? Unlike our competitor kits that require the hiring of a pump truck for concreting and hole boring machinery, our kits do not require this as we have implemented the SuperFoundation into our design which means you won t be out of pocket for any extras. 5. How do our kits affect the environment? Our kits are environmentally friendly as they do NOT require the use of hole boring machinery which produce on average 1000tonne of CO² omissions per cubic meter. 6. Are kits available for ground mounting and roof mounting? Yes, we have kits to suit ground and roof mounting. 7. What solar panels are suited to the mounting kits? Our kits suit SilexSolar, BPSolar, Sunpower, and Sanyo. However please contact us if you have any other brand of solar panel and we will advise you as to which mounting kit will be best suited to your needs. 8. Do kits come with a warranty? Yes, all kits come with a 10 year limited warranty 9. Are instructions and CAD drawings included? Yes, upon purchase of any of our kits we supply all CAD drawings and installation instructions. 10. What costs are associated with the moutning kits? There are NO hidden costs; all our prices are available in our brochures. 11. Where can I purchase the kits from? Trentleck Pty Ltd can be contacted via www.trentleck.com / by phone on: 03 5634 8248 / by email: trent@trentleck.com