TRAINING AND SEMINAR OVERVIEW INTERNATIONAL 2017
Laser Alignment Product Line March 13th to 17th Laser shaft alignment, Geometric alignment 6 Products sales and applications training. June 19th to 23th Laser shaft alignment, Geometric alignment 6 Products sales and applications training. October 23rd to 27th Laser shaft alignment, Geometric alignment 6 Products sales and applications training. November 28th to December 1st PARALIGN Service Products sales and applications training. 10 Hotel Information 12 Registration form 13 2
Vibration Product Line March 27th to 31st / September 18th to 22nd Online Training Category I on OMNITREND Center 8 Online training for people who want to learn about PRUFTECHNIK Online Condition Monitoring Systems and want to be able to perform commissioning on VIBGUARD, VIBRONET Signalmaster and VIBROWEB XP with the new software platform. April 3rd to 7th / September 25th to 29th Online Training Category II on OMNITREND Center 9 You already possess the necessary knowledge to commission an Online Condition Monitoring System? You want to receive an in-depth training on the advanced features and functionalities of the new software platform? March 20th to 24th / June 26th to 30th OMNITREND Center with VIBXPERT family Product training for our reliable VIBXPERT family in the NEW software platform, OMNITREND Center. 7 Hotel Information 12 Registration form 13 3
4
General information Goal The participant will know about the fundamentals of PRUFTECHNIK s laser alignment and vibration product portfolio. During the training days, the participant will receive a compelling toolbox to effectively and successfully sell each of the products, to maintenance & industrial markets. Theoretical and practical sessions combined with sharing real experience, will enable participants to further develop and update their sales skills, including product presentations, product advantages, key selling points and sales strategies. Package content Training provided by PRUFTECHNIK experts includes all necessary training material, refreshments and lunch as well as an official dinner. Accommodation and travel expenses Not included within the training package. We recommend the Hotel zur Mühle, Price 92.00 EUR per night, breakfast included. Target participants Sales partners and related product specialists. Prerequisite Must be an authorized PRUFTECHNIK representative with ordered or owned demonstration equipment. Participants Limited places available, maximum 10 participants. Training location Training will be conducted at PRUFTECHNIK facilities or at Hotel zur Mühle in Ismaning, Germany. Price The training is free of charge. 5
Laser shaft alignment /Geometric alignment Training course on shaft alignment products: SHAFTALIGN OS3, OPTALIGN smart RS5, ROTALIGN touch and intrinsically safe products. Training course on geometric products: CENTRALIGN Ultra, LEVALIGN Ultra, LEVALIGN expert, PENTALIGN and INCLINEO. Training course on PC Software, ALIGNMENT CENTER/ALIGNMENT RELIABILITY CENTER 4.0. The course is focused on sales including product updates and applications, products hands-on and workshops. LASER SHAFT ALIGNMENT PRODUCT TRAINING Shaft alignment products and applications Standard and intrinsically safe products Product market positioning Practical and interactive sessions on products and sales skills Sales experiences exchange GEOMETRIC ALIGNMENT PRODUCT TRAINING Bore alignment with CENTRALIGN Ultra Flatness with LEVALIGN Ultra, LEVALIGN expert and INCLINEO Perpendicularity and parallelism with PENTALIGN Straightness measurement for rails, bores and spindles Product market positioning Practical and interactive sessions on products and sales skills TRAINING CUSTOMIZATION With the registration form please mention if any other topic or product is for you relevant. We will do our best to accomodate your level of expertise in order to offer you an attractive training package. GENERAL SEMINAR INFORMATION TRAINING DATES: March 13th to 17th June 19th to 23rd October 23rd to 27th START - FINISH Monday: 9 am Friday: 4 pm NUMBER OF PARTICIPANTS: maximum 10 participants 6
OMNITREND Center with VIBXPERT family Product training of the VIBXPERT family in the new software platform, OMNITREND Center. TARGET AUDIENCE: Sales, application and service engineers, as it covers the different functionalities of the devices and of the new software platform in depth. GOAL: After the training, the participants will: Be able to use the VIBXPERT II with the new software platform Be able to perform product demonstrations and services on site from the basic to advanced Level. CONTENT: A selection of various key topics such as: Omnitrend Center: Philosophy behind the new Software, Creating routes, Basic kinematic model, Task templates, Machine templates, Findings, Multi-edit, Filtering, Analysis functions and Basic reporting, Import of OMT 2.91 Data General questions about VXP family devices REQUIREMENTS: Basic knowledge of vibration analysis and data collection. GENERAL SEMINAR INFORMATION TRAINING DATES: March 20th to 24th June 26th to 30th START - FINISH Monday: 9 am Friday: 2 pm NUMBER OF PARTICIPANTS: maximum 10 participants 7
Online Training Category I on OMNITREND Center Online training for people who want to learn about PRUFTECHNIK online Condition Monitoring Systems and want to be able to perform commissioning on VIBGUARD, VIBRONET Signalmaster and VIBROWEB XP with the new software platform. GENERAL SEMINAR INFORMATION TARGET AUDIENCE: People with no prior knowledge as well as those who are already familiar with our online Condition Monitoring Systems should join, as the training will focus on the use of the new software platform. This is a technical training, however we encourage sales people to attend, since it provides the foundation to understand the applications and benefits of each system. GOAL: After the training participants Will be proficient users of the new software platform Will understand the typical application for each online Condition Monitoring Systems (CMS) Will know the main parts in order to explain the technical advantages to customers Will be able to commission a VIBGUARD, VIBRONET Signalmaster and VIBROWEB XP CONTENT: New software platform: Channel and Measurement groups, Kinematic model (basic) task templates, intelligent data reduction, Alarm handling, Machine templates, XY diagram VIBGUARD, VIBRONET Signalmaster and VIBROWEB XP particularities Troubleshooting Handling Online projects: Do's and Dont's TRAINING DATES: March 27th to 31st September 18th to 22nd START - FINISH Monday: 9 am Friday: 2 pm NUMBER OF PARTICIPANTS: maximum 8 participants FINAL EXAMINATION: There will be a final theoretical and practical exam at the end of the training. Those who approve both exams will be officially PRUFTECHNIK Condition Monitoring Category I certified users. 8
Online Training Category II on OMNITREND Center You already possess the necessary knowledge to commission an Online Condition Monitoring System? You want to receive an in-depth training on the advanced features and functionalities of the new software platform? Then join our advanced online training now! GENERAL SEMINAR INFORMATION TARGET AUDIENCE: This training is targeted to technical people who perform commissioning and provide technical support, and who have already attended the Category I training. GOAL: You will become proficient on the advanced features of each online CMS concerning the new software platform. CONTENT: Understanding the Modbus communication protocol: Theory behind it, how to set up bidirectional communication between the Online CMS and a control system, WEARSCANNER integration Catching transient events with the Event Recorder Introduction to orbits and its configuration in the new software platform Kinematic model (Planetary and multi-stage gearboxes) Findings, ToDo s and Reporting Real examples/applications from our TTS (Temporary Telediagnosis Services) TRAINING DATES: April 3rd to 7th September 25th to 29th START - FINISH Monday: 9 am Friday: 2 pm NUMBER OF PARTICIPANTS: maximum 8 participants FINAL EXAMINATION: There will be a final theoretical and practical exam at the end of the training Those who approve both exams will be officially PRUFTECHNIK Condition Monitoring certified Category II users. 9
PARALIGN Service PARALIGN is a key service for PRÜFTECHNIK. This training shall provide knowhow and transfer of knowledge within the group. Training will also take part at production lines. GENERAL SEMINAR INFORMATION TARGET AUDIENCE: Service engineers performing roll-alignment in the field. GOAL: Attendees shall get a better background in key industries of PARALIGN service. They shall have an understanding about requirements of different industries, in regards to machine types, tolerances, etc. After the training, attendees shall be able to talk to a customer about using PARALIGN at different machines, in a certain industry, to advertise while service. Attendees shall be able to estimate working time for different jobs, in order to customize quotes, etc. CONTENT: Attendees shall get a better background in key industries of PARALIGN service. They shall have an understanding about requirements of different industries, in regards to machine types, tolerances, etc. After the training, attendees shall be able to talk to a customer about using PARALIGN at different machines, in a certain industry, to advertise while service. Attendees shall be able to estimate working time for different jobs, in order to customize quotes, etc. TRAINING DATE: November 28th to December 1st START - FINISH Tuesday: 9 am Friday: 4 pm NUMBER OF PARTICIPANTS: maximum 10 participants 10
11
Find your Hotel, find PRUFTECHNIK HOTEL-GASTHOF ZUR MÜHLE Kirchplatz 5 85737 Ismaning, Germany Phone: +49 89 96093-0 Fax: +49 89 96093-110 www.hotel-muehle.de COMING FROM THE AIRPORT take the S-train No.8 direction Munich to the stop Ismaning (15 minutes) it s a 5 minute walk from the station to the hotel towards the steeple the way from the airport to Ismaning by taking a taxi will be about 30 minutes PRÜFTECHNIK AG Oskar-Messter-Straße 19-21 85737 Ismaning A92 Nürnberg Highway Junction B13 A9 Landshut S 8 B11 Stuttgart A8 A99 B471 Highway Junction Munich North B471 ISMANING n Monitoring GmbH Business Park 'am Lenzenfleck' PRÜFTECHNIK PRUFTECHNIK NDT GmbH Am Lenzenfleck 21 A99 Am Hang PRÜFTECHNIK Condition Monitoring GmbH Oskar-Messter-Str. 19-21 85737 Ismaning Unterföhringer Straße Lindenstraße Westerfeldstr. An der Isarau Erlenstraße Auenstraße Hotel-Restaurant Zur Mühle Le uchtenbergstr. Schlossfeldstraße Ecknerstr. Parkstraße nchner Straße ngerstraße Münchner Straße B 471 ISMANING 3 Hauptstraße Fischerstraße 2 Schloßstraße Hauptstraße Dorfstraße aße 4 5 6 Greimelstraße Bründlweg Steinstraße Am Griesacker Auenstraße Kirchplatz Dr. Schmitt-Str. Erich-Zeitler-Str. Bahnhofstraße M ühlenstraße Za cherlstr. M Freisinger Straße 1 Schweigerstraße Oskar-Messter-Straße Carl-Zeiss-Ring Fraunhofer Am Lenzenfleck Gutenbergstraße straße Aschheimer Straße Robert- Bürkle-Straße B 471 Osterfeldstraße Osterfeldstraße Bahnhof Station Steinheilstraße Max-von-Eyth-Straße Geroldstraße Straße Fraunhoferstr. Adalper Mayerbacherstraße Adalperostraße Adalperostraße Theodolindenst.r Seidl-Kreuz-Weg Asc B 388 1 Hotel Residenz 2 Hotel Fischerwirt 3 Hotel am Schloßpark 4 Hotel Zur Mühle 5 Hotel Zur Post 6 Hotel Frey MUNICH S 8 Highway Junction Munich East Passau A94 12
Registration* form REGISTRATION FORM Please fill in this registration form and send it to PRUFTECHNIK Condition Monitoring. Kindly mention your arrival/departure date for the accomodation booking. YOUR CONTACT FOR THE PRUFTECHNIK SEMINARS Andrea Brandmeir-Gough andrea.brandmeir-gough@pruftechnik.com Tel. +49 89 99616-311 Fax +49 89 99616-205 Position Management Sales Services Experience with Condition Monitoring and Alignment products 0 to 1 Year 1-3 Years 3+ Years ISO Certifications CAT I CAT II CAT III-IV Trainings 2017 Laser shaft & Geo 13-17 March Laser shaft & Geo 19-23 June Laser shaft & Geo 23-27 October VIBXPERT with OMTC 20-24 March Online I with OMTC 27-31 March Online II with OMTC 3-7 April VIBXPERT with OMTC 26-30 June Online I with OMTC 18-22 September Online II with OMTC 25-29 September PARALIGN *NEW training* 27 November 1 December Trainee Information Last Name: First Name: Company Name: Email Address: Country: Phone Number: Arrival Date: Departure Date: One Form per person please. IMPORTANT NOTE PRUFTECHNIK reserves the right to cancel the training in case there are not enough participants. Please wait with your travel arrangements until you have received the PRUFTECHNIK training confirmation. If you have to cancel the hotel reservation on short notice (1-3 days) before the training starts, then please cancel the reservation by yourself and send a copy to Mrs. Andrea Brandmeir-Gough *Also available online 13
P R O V E N Q U A L I T Y Made in Germany Global Presence Qualified Support Quality Service PRÜFTECHNIK Dieter Busch AG Oskar-Messter-Str. 19-21 85737 Ismaning Germany Tel.: +49 89 99616-0 Fax: +49 89 99616-100 info@pruftechnik.com www.pruftechnik.com