TRE by Next Ship SPECIFICATION SHEET
THE PRODUCT Tre offers designers and architects the ability to easily create intriguing and visually stunning surfaces. TRE 0 TRE I Tre tiles have a height of 185.6 mm and an edge length of 214.3 mm. Tre I, II and III are available in 2 levels of thickness: 26 mm and 41 mm, giving the possibility to create tiered surfaces. TRE II TRE III The tiles can be assembled in 2 main ways: either with all vertices and edges aligned, or offset, with the apexes of the tiles aligned with the opposing tile s center point. Tre 0 / Tre I 26 mm / Tre I 41 mm / Tre II 26 mm / Tre II 41 mm / Tre III 26 mm / Tre III 41 mm Colours: Hello Eternity / Moon Garden / Reliable Shaman / Oak Cabernet
APPLICATION POSSIBILITIES 1. Assembling technique: apexes aligned with the opposing tile's center point 1/A Horizontal alignment 1/B Vertical alignment 1/A TRE II 1/B TRE 0, I 1/A TRE 0, I, III
APPLICATION POSSIBILITIES 2. Assembling technique: all vertices and edges aligned 2/A Horizontal alignment 2/B Vertical alignment 2/A TRE I 2/B TRE 0, III 2/A TRE 0, I, II, III
THE MATERIAL Concrete has had somewhat of a renaissance in recent times. Known for its strength, versatility, durability and an impressive list of other unique qualities, concrete is one of the most useful and ubiquitous building materials of the past nearly two centuries. KAZA s proprietary formula exposes the true potential of concrete, reaching beyond utility into artistically refined applications that are stronger and more durable. Our production process is the culmination of the timeless and irreplaceable art of master craftsmanship and 21 st century technologies and materials. The human element is present and involved in every step of manufacture. Treatments All available treatments can be applied on the consistently high quality tiles to achieve water and frost resistance for application in wet areas, floors and outdoor spaces alike. Fibre reinforced concrete mixture, perfected with marble powder to achieve great durability and additives for completely smooth surfaces. Coloured with powdered pigments that result in through-body colour.
COLOURS * 24 base colours 6 metallic colours Hello Eternity / white Scenic Canyon / white sand Seethrough Nature / pastel yellow Subtle Euphoria / salmon pink Drizzling Fragrance / rose gold Holistic Approach / silk grey Surreal Resonance / rose beige Evocative Sencha / olive green Organic Zest / orange terracotta Surprise Cruise / beige metallic Moon Garden / light grey Velvet Serenity / brownish grey Next to Everything / olive brown Advanced Serum / pastel claret Mutual Attraction / dark ore Reliable Shaman / cement grey Illuminating Solitude / mud grey Rewarding Peace / light blue Intuitive Aura / lilac blue Majestic Science / light silver Night Straight / dark grey Poetic Union / khaki beige Breeze Catcher / blue green Healing Aspiration / pigeon blue Inherited Serendipity / gold Total Eclipse / black Weekend Haven / pale green Marine Muse / patina green Seascape Allure / night blue Firewall Festival / bronze *A surcharge of 10% is applied to glossy tile orders. Suggested colours for TRE Moreover, we can mix and match almost any colour code or sample sent to us, though a surcharge may apply to special colours. Hello Eternity Holistic Approach Reliable Shaman All KAZA Concrete products are treated against stains and moisture, and are available in matte and glossy finishings. Colours indicated at tile specifications are designers recommendations. Rewarding Peace Subtle Euphoria Night Straight Any tile design can be ordered in any colour or any combination of colours. Total Eclipse Drizzling Fragrance
TECHNICAL DATA NO. OF DIFFERENT FORMS 9 DIMENSIONS THICKNESS 0 III: 213 184 mm / 8 6/16" 7 4/16" 1/2: 106 184 mm / 4 3/16" 7 4/16" I III: 26 mm 41 mm / 1" 1 10/16" 0, 1/2: 7 mm / AREA 0 III: 51.46 pcs/m 2 / 4.742 pcs/sf 1/2: 102 pcs/m 2 / 9.485 pcs/sf 0 III: 0.0196 m 2 /pc / 0.2109 sf/pc 1/2: 0.0098 m 2 /pc / 0.1054 sf/pc WEIGHT I: 0.59 kg/pc II: III: 1.31 lb/pc 0.62 kg/pc 1.37 lb/pc 0.74 kg/pc 1.63 lb/pc 26 41 26 41 I: 1.27 kg/pc II: III: 2.8 lb/pc 1.3 kg/pc 2.87 lb/pc 1.41 kg/pc 3.1 lb/pc I: 30.12 kg/m 2 II: III: 6.17 lb/sf 31.65 kg/m 2 6.83 lb/sf 37.77 kg/m 2 7.74 lb/sf I: 64.83 kg/m 2 II: III: 13.28 lb/sf 66.36 kg/m 2 13.6 lb/sf 72 kg/m 2 14.74 lb/sf 0: 0.31 kg/pc / 0.68 lb/pc 1/2: 0.155 kg/pc / 0.34 lb/pc 0: 18.52 kg/m 2 / 3.24 lb/sf 1/2: 18.52 kg/m 2 / 3.24 lb/sf COLORS* FINISHES AVAILABLE MATERIAL SUITABILITY all basic colours are available matte or glossy reinforced, colored fine composite concrete interior / exterior use for walls *Custom colors upon request. General Material Performance Data
APPLICATION PARTICULARITIES TRE 0 and TRE 1/2 are elements designed to help TRE surfaces adapt to any possible challenge that could occur during the installation. TRE 0 Because of their flat surface, these tiles can be easily cut (see installation guide) to fit every edge, corner, or special element to integrate. When specifying a TRE surface, always apply TRE 0 and TRE 1/2 elements near the edges and around the special elements of the wall. Special elements TRE 1/2 left TRE 1/2 right Inside corner Edges Outside corner
APPLICATION PARTICULARITIES Saturn tiles can be installed on curved wall surfaces with a radius above a specific length. The radius lengths are calculated to ensure that the installation results in a tiled surface that still matches the original design concept. R 162.6 cm R 121.1 cm 0.22 cm 0.21 cm When the tiles are installed vertically, the minimum radius of the wall surface should be 162.6 centimetres. Installed this way, the grout gap between the tiles will dilate to 0.22 centimetres. When the tiles are installed horizontally, the minimum radius of the wall surface should be 121.1 centimetres. Installed this way, the grout gap between the tiles will dilate to 0.21 centimetres.
INSTALLATION Application of KAZA Concrete tiles needs a great deal of skill and attention to detail. Approved competent contractors should be employed with experience of similar projects fixing natural stone or concrete products. For more information, ask for Installation, maintenance and cleaning guide. 1. Preparations kg 10 30 C / 50 86 F Check load bearing capacity of the substrate Tiling operations temperatures Before starting work, the background has to be dry. It is recommended that the wall is painted the same colour as the tile. 2. Fixing We recommend two types of bonding method: C2, C2E 5 m 2 5 m 2 5 m 2 kg 5 m 2 5 m 2 5 m 2 < 30 kg/m 2 U1, U2, R1, E5 5 m 2 5 m 2 5 m 2 Cement based Polymer based Always begin applying from the bottom. Large areas should be processed in sections. 3. Grouting Grouting is not needed, only in some cases e.g: floor application, wet areas. Use professional gloves to avoid leaving dirty spots on the surface. Due to the surface treatment, the excess grouting can be easily removed.
CARE AND MAINTENTANCE For more information, ask for Installation, maintenance and cleaning guide. 1. Sealants Kaza cover tiles undergo a surface treatment process during manufacturing and therefore do not require special care. All KAZA tiles come treated from the factory, to protect against water and stains. 5-10 years Heavy duty tiles need to be retreated every 5 to 10 years. A repeat treatment of the surface is recommended: - every 10 years for side walls - every 5 years for floorings (every 2-3 years in case of high foot traffic) 2. Maintenance For heavy stains, eg: oil, grease, residue of floor care products & floor shine, rubber tracks from shoes, soot, etc. we would recommend cleaning with slightly alkaline, general cleaning products. In case of contamination, the surface must be cleaned instantly. A strong impact can leave a mark. 3. Cleaning Do not use acid or corrosive products! For everyday cleaning, use feather dusters or dry fabric. Use a spray bottle containing water and just a few drops of the all-purpose cleaner.
REFERENCES Tre 0 / Tre II 41 mm / Tre III 26 mm / Tre III 41 mm Colours: Hello Eternity / Moon Garden
REFERENCES Tre 0 / Tre I 26 mm / Tre I 41 mm / Tre II 26 mm / Tre II 41 mm / Tre III 26 mm / Tre III 41 mm Colours: Total Eclipse / Hello Eternity
REFERENCES Tre 0 / Tre I 26 mm / Tre I 41 mm / Tre II 26 mm / Tre II 41 mm / Tre III 26 mm / Tre III 41 mm Colour: Hello Eternity, Moon Garden, Velvet Serenity, Drizzling Fragrance, Mutual Attraction
REFERENCES Tre 0 / Tre I 26 mm / Tre I 41 mm / Tre II 26 mm / Tre II 41 mm / Tre III 26 mm / Tre III 41 mm Colour: Hello Eternity, Moon Garden, Velvet Serenity, Drizzling Fragrance, Mutual Attraction
For further assistance: call +44 (0) 7884 565576 e-mail to info@kazaconcrete.com www.kazaconcrete.com KAZA Concrete LTD First Floor, Unit 3, Temple place 247 The Broadway, London SW19 1SD