SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: December 31, 2017 Certificate Number: 2633.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on aerospace components, metals, metal fasteners, paper, plastics, office furniture, rubber, windows/doors, and wood: Tests Test Methods 1 Metallurgical: Hardness: Rockwell Hardness & Rockwell Superficial Hardness ASTM E18 (B, C, 15T, 30T, 15N, 30N) Microindentation Knoop (500g) Vickers (500g) ASTM E384 ASTM E384 Tensile: Grey Iron Tensile Testing ASTM A48 Mechanical Properties of Fasteners, Washers and Rivets ASTM F606, F606M (Except 3.5 Wedge) Mechanical Testing of Steel Products ASTM A370 (Sections 5-15, 17) Stress Durability (Hydrogen Embrittlement) SAE/USCAR-7; SAE J78, J81, J1237; GM512M, GM6010M, GM6171M; GMW4205, GMW15170 Tension Testing of Metallic Materials ASTM E8 (1,124 and 56,000 lbs) Plastic Strain Ratio Drawability (r-value) ASTM E517 Tensile Strain - Hardening - Formability (n-value) ASTM E646 Tension Testing Wrought & Cast Aluminum Products ASTM B557 Metallographic Evaluation: Preparation of Metallographic Specimens Case Depth EDS (Energy Dispersive Spectroscopy) Determining Average Grain Size Estimating Depth of Decarburization of Steel Specimens ASTM E3 SAE J423 ASTM E1508 ASTM E112 (Comparison and Intercept) ASTM E1077 (A2LA Cert. No.2633.01) Revised 11/29/2017 Page 1 of 3
Tests Test Methods 1 Metallographic Evaluation (continued): Evaluating Graphite Microstructure in Iron Castings ASTM A247 Macroetching ASTM E381 Microetching ASTM E407 Reflected Light Photomicrography ASTM E883 SEM Beam Characterization ASTM E986 Density: Wet Density ASTM B311 Coating Characterization: Coating Weight ASTM A90, Honda HES D2008; Honda 5100Z-SGO-A000; Honda 5100Z-SEO-000; Qualitative Adhesion Testing of Metallic Coatings ASTM B571 (Sections 3, 4, 5), JDQ 117; Honda HES D2003 (3.4), D6001 (4.4) Coating Thickness Measurement by Microscopical Exam ASTM B487, JDQ 117, JDM F15; Honda HES D2003 (3.3), D2008, D2021, D2016, D2028, D6001 (4.2), D6501 (3.2); Acid Resistance ASTM D1308; Honda HES D6001, D2016, D2021, D6501 (3.25, 3.28); Honda 5100Z-SGO-A000 (6-15); Honda 5100Z-SEO-000 (6-14); Alkali Resistance ASTM D1308; Honda HES D2008, D2016, D2021; Honda 5100-SGO-A000 (6-14); Honda 5100-SEO-000 (6-13); Honda HES D6501 (3.24, 3.28); Fuel Resistance Honda HES D2016, D2021; Honda 5100Z-SGO-A000 (6-17); Honda 5100Z-SEO-000 (6-16); Honda 4251Z-SEP-A000 ( 5); Honda HES D6501 (3.21, 3.28); Oil Resistance Honda HES D2008, D2016, D2021, D2028, D6501 (3.23, 3.28); Honda 5100Z-SGO-A000 (6-16); Honda 5100Z-SEO-000 (6-15); Honda 4251Z-SEP-A000 ( 6); Honda HES Degree of Blistering ASTM D714 (A2LA Cert. No. 2633.01) Revised 11/29/2017 Page 2 of 3
Tests Test Methods 1 Coating Characterization (continued): Degree of Rusting ASTM D610 Evaluation of Painted/Coated/Plated Specimens ASTM D1654 Water Immersion Honda HES D2008, D2016, D2021, D2028; Honda 5100Z-SGO-A000 (6-8, 6-10); Honda 5100Z-SEO-000 (6-7, 6-9); Honda 4251Z-SEP-A000 (Section 5); Honda HES D6501 Sections 3.18, 3.37; Coating Adhesion ASTM D3359; Honda HES D2008, D2016, D2021, D2028, D6501 (3.6); Honda 5100Z-SGO-A000; Honda 5100Z-SEO-000; Environmental Simulation: Salt Spray (Fog) ASTM B117; JDM F15, F15X1; Honda HES 6501 Sections 3.15.1, 3.15.2; Honda HES: D2003 (3.2), D2008, D2016, D2021, D2028, D6001; Honda 5100Z-SEO-0000 Section 6-2-1; Honda 5100Z-SGO-A000 Section 6-2-1; ; JDQ 115; JDQ 117 Hot Salt Water Resistance Honda 5100Z-SGO-A000 (6-3); Honda 5100Z-SEO-000 (6-3); 1 The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification or procedure. Only the methods listed above on this Scope are accredited. Test Specifications: Specification for Stainless Steel 316 (Surgical Implants) Specification for Titanium 6 4 (Surgical Implants) JDM F15 Addendum Zinc Clear Chromate C Requirements ASTM F138 ASTM F136 BOSSARD CSS3 (A2LA Cert. No. 2633.01) Revised 11/29/2017 Page 3 of 3
Accredited Laboratory A2LA has accredited Tipp City, OH for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 6 th day of November 2015. President and CEO For the Accreditation Council Certificate Number 2633.01 Valid to December 31, 2017 Revised November 29, 2017 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 CHEMICAL Valid To: December 31, 2017 Certificate Number: 2633.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on aerospace components, metals, metal fasteners, paper, plastics, office furniture, rubber, windows/doors, and wood: Tests Test Methods 1 Spectroscopy: Inductively coupled plasma (ICP) (Al, As, B, Be, Bi, Cr, MVMTC WI-16; ASTM E1479 Cu, Fe, Ga, Mg, Mn, Mo, Nb, Ni, P, Pb, Sb, Se, Si, Sn, Ta, Te, Ti, V, W, Y, Zr) Optical Emission Spectroscopy (OES): Aluminum and Aluminum Alloys (Be, Bi, B, Ca, Cr, Co, Cu, Ga, Fe, Pb, Li, Mg, Mn, Ni, P, Si, Na, St, Sb, Ti, V, Zn) Cast Iron (C, Cr, Cu, Mn, Mo, Ni, P, Si, S, Sb, Ti, V) Copper Based Low Alloy Steels and Cast Irons (Less Nitrogen) (Al, As, B, Ca, C, Cr, Co, Cu, Mn, Mo, Ni, Nb, P, Si, S, Sb, Ti, Zr) Stainless Steel (Less Nitrogen) (Cr, Ni, Mo, Mn, Si, Cu, C, P, S) Zinc Based Nickel Based Titanium (Less Oxygen, Hydrogen, Nitrogen) (Al, Fe, V) Combustion: Combustion LECO (C, S) Failure Analysis: ASTM E1251 ASTM E1999 ASTM E415 ASTM E1086 ASTM E1019 Using the test methods listed above and evaluation of data methods: ASTM E620, E678, E860, E2332 (Withdrawn 2004) 2 (A2LA Cert. No.2633.02) Revised 11/29/2017 Page 1 of 2
1 The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification or procedure. Only the methods listed above on this Scope are accredited. Test Specifications: Specification for Stainless Steel 316 (Surgical Implants) ASTM F138 Specification for Titanium 6 4 (Surgical Implants) ASTM F136 Standard Test Methods, Practices, and Terminology for ASTM A751 Chemical Analysis of Steel Products 2 This laboratory s scope contains withdrawn methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. (A2LA Cert. No. 2633.02) Revised 11/29/2017 Page 2 of 2
Accredited Laboratory A2LA has accredited Tipp City, OH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 6 th day of November 2017. President and CEO For the Accreditation Council Certificate Number 2633.02 Valid to December 31, 2017 Revised November 29, 2017 For the tests to which this accreditation applies, please refer to the laboratory s Chemical Scope of Accreditation.