Silicone Rubber Sheet High grade silicone.generally resistant to moderate or ozidizing chemicals,ozone,concentrated sodium hydroxide. Standard Size : 1M X 2M (Width by Length) 2 M Any length longer than 2m Translucent (other colors are available for request) Temperature range ASTM D2137 C 70 to 200 Specific Gravity ASTM D792 a 1.25 Hardness ASTM D2240 Shore A 50+-5 kfg/cm2 100 390 Breakdown Voltage UL94HB KV 24 Volume Resistively UL94HB.cm 1 x 1015 Aging Properties, 100oC, 72 hours (-7 shore A) -26-7 Oil Resistance Properties, test by JIS #3 test oil, under 150oC, 72 hours Volume Change (-17 shore A) -35-6 +35 info@urubber.com 1 www.urubber.com
Fluoro (Viton) Rubber Sheet High Quality A premium grade fluoroelastomer sheet designed for applications which require better fluid resistance and fl ibilit t ti Standard Size : ft d h t i It i d d f li ti 1M x 2 M(Width by Length) 2 M i i i t ti f l ti Specific Gravity ASTM D792 g/cm3 1.9+-0.1 Hardness ASTM D2240 Shore A 72+-5 kgf/cm2 130 Tear Strength CNS 3559 kgf/cm 45 100 Modulus CNS 3553 kgf/cm2 86 260 Compression Set (Using a 3.5 mm dia.o-ring) 72H at 25oC 72H at 100oC 72H at 150oC 72H at 175oC 72H at 200oC 16 11 10 12 22 Aging Properties, 230oC, 72 hours +1 shore A -6 +4 Aging Properties, 275oC, 72 hours +0 shore A -28 +22 Oil Resistance Properties, test by gasoline, under 40oC, 70 hours Volume Change -4 shore A -18-4 +3.5 info@urubber.com 2 www.urubber.com
Viton A - 66 Fluorine Rubber Sheet GOOD Chemical Resistance General PurposeViton Fluoroelastomer General Properties Guarantees highest quality commercial sheeting available for gaskets. Fully certifiable to ASTM D2000. Eliminates inventory confusion 100 Virgin Viton Compound Chemical Resistance: A broad range of resistance to oils, fuels, lubricants and most mineral acids. Very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Compression Set: Exceptionally good resistance even at temperatures that can embrittle other non-fluorinated elastomers. Environmental: Good resistance to atmospheric oxidation, sun, and weather, excellent resistance to fungus and mold. Standard Size : 1M x 2 M(Width by Length) 2 M Specific Gravity ASTM D792 g/cm3 1.9+-0.1 Temperature Range ASTM D2137-18 C to 204 C Hardness ASTM D2240 Shore A 72+-5 kgf/cm2 120 Tear Strength CNS 3559 kgf/cm 45 100 Modulus CNS 3553 kgf/cm2 86 180 Compression Set (Using a 3.5 mm dia.o-ring) Compression Set, ASTM D395B plied Aging Properties, 230oC, 72 hours 72H at 25oC 72H at 100oC 72H at 150oC 72H at 175oC 72H at 200oC 22hr @ 175 C 26 19 15 16 29 50 +1 shore A -6 +4 Aging Properties, 275oC, 72 hours +0 shore A -28 +22 Oil Resistance Properties, test by gasoline, under 40oC, 70 hours Volume Change ASTM D2000 specifications 2HK707B38E078Z -4 shore A -18-4 +3.5 info@urubber.com 3 www.urubber.com
Viton B - 68 Fluorine Rubber Sheet Better Chemical Resistance General PurposeViton Fluoroelastomer Acid Resistant Viton Viton B has better resistance and retains flexibility better after dry heat aging than Viton A. It is recommended for applications requiring maximum retention of elastic properties combined with good mechanical properties. Viton B is specified by the FS Chemical ResistanceViton B offers superior resistance to both diluted and concentrated aggressive acids. Thermodyn's exclusive B compound TH-6070-B* made of Viton is resistant to various mineral acids including: Sulfuric Acid Nitric Acid Hydrochloric Acid General Properties Standard Size : 1M x 2 M(Width by Length) 2 M Specific Gravity ASTM D792 g/cm3 1.9+-0.1 Temperature Range ASTM D2137-18 C to 220 C Hardness ASTM D2240 Shore A 75+-5 kgf/cm2 120 psi 1400 Tear Strength CNS 3559 kgf/cm a 100 Modulus CNS 3553 kgf/cm2 86 175 175 Compression Set (Using a 3.5 mm dia.o-ring) Compression Set, ASTM D395B plied Aging Properties, 230oC, 72 hours 72H at 25oC 72H at 100oC 72H at 150oC 72H at 175oC 72H at 200oC 22hr @ 175 C 26 19 15 16 29 50 +1 shore A -6 +4 Aging Properties, 275oC, 72 hours +0 shore A -28 +22 Oil Resistance Properties, test by gasoline, under 40oC, 70 hours Volume Change ASTM D2000 specifications 2HK707B38E078Z -4 shore A -18-4 +3.5 info@urubber.com 4 www.urubber.com
Viton F - 70 Fluorine Rubber Sheet Best Chemical Resistance The "F" family of Viton was designed for todays oxygenated fuels, modern lubricants, and blended chemicals. As new chemicals and fuels are developed, new technology in Viton has led to the development of the Viton F family of sealing products. Chemical Resistance Viton F offers superior fluid resistance and very low permeation in very aggressive environments. Viton F offers excellent resistance to fluids that Viton A and B types cannot adequately resist. Viton F types are highly resistant to oxygenated fuels containing (MeOH, EtOH, MTBE), engine lubricants (SE-SF and SG-SH grades), aromatic hydrocarbon process fluids chemicals and concentrated mineral acids Standard Size : 1M x 2 M(Width by Length) 2 M aa Specific Gravity ASTM D792 g/cm3 1.9+-0.1 Temperature Range ASTM D2137-18 C to 220 C Hardness ASTM D2240 Shore A 75+-5 kgf/cm2 120 psi 1400 Tear Strength CNS 3559 kgf/cm a 100 Modulus CNS 3553 kgf/cm2 86 175 175 Compression Set (Using a 3.5 mm dia.o-ring) Compression Set, ASTM D395B plied Aging Properties, 230oC, 72 hours 72H at 25oC 72H at 100oC 72H at 150oC 72H at 175oC 72H at 200oC 22hr @ 175 C 26 19 15 16 29 45 +1 shore A -6 +4 Aging Properties, 275oC, 72 hours +0 shore A -28 +22 Oil Resistance Properties, test by gasoline, under 40oC, 70 hours Volume Change Fluid Resistance, ASTM D471 immersed: 20 maximum volume increase in Toluene at 20 C (68 F) for 70 hours. -4 shore A -18-4 +3.5 info@urubber.com 5 www.urubber.com
Fluoro (Viton) Rubber Sheet Commercial Standard Size 1M x 2 M(Width by Length) 2 M Temperature Rage ASTM D2137-18 C to 204 C Specific Gravity ASTM D792 g/cm3 1.9+-0.1 Hardness ASTM D2240 Shore A 72+-5 kgf/cm2 70 Tear Strength CNS 3559 kgf/cm 45 100 Modulus CNS 3553 kgf/cm2 86 260 Compression Set (Using a 3.5 mm dia.oring) 72H at 25oC 72H at 100oC 72H at 150oC 72H at 175oC 72H at 200oC 26 19 15 16 29 Aging Properties, 230oC, 72 hours +1 shore A -6 +4 Aging Properties, 275oC, 72 hours +0 shore A -28 +22 Oil Resistance Properties, test by gasoline, under 40oC, 70 hours Volume Change -4 shore A -18-4 +3.5 Nitrile (NBR) Rubber Sheet Commercial Grade Hardness ASTM D2240 Shore A 77+-5 100 Modulus ASTM D-412 kgf/cm 2 105 kgf/cm 2 107 123 Tear Strengh ASTM D-412 kgf/cm 31 info@urubber.com 6 www.urubber.com
Nitrile (NBR) Rubber Sheet Hign Grade Premium grade nitrile, generally resistant to most hydrocarbons,fats,oils,greases,hydraulic fluids,chemicals and solvents. Temperature range ASTM D2137 C 30 to 110 Hardness ASTM D2240 Shore A 70+-5 100 Modulus ASTM D-412 psi 250 kgf/cm 2 100 ASTM D-412 psi 1400 500 Tear Strengh ASTM D-624 kgf/cm 55 ASTM Line Call D2000-2BG615A14EA14EF11EF21EO14E034 White Nitrile (NBR) Rubber Sheet Food Grade White Nitrile sheet made to FDA requirements for food, pharmaceutical, cosmetic, and other applications. Nonmarking, non-toxic, non-allergenic formulation. Good oil and animal fat resistance. Generally resistant to most hydrocarbons,fats,oils,grease,hydraulic fluids,chemicals and solvents. Temperature range ASTM D2137 C 30 to 110 Hardness ASTM D2240 Shore A 70+-5 100 Modulus ASTM D-412 psi 320 kgf/cm 2 70 ASTM D-412 psi 1000 350 Tear Strengh ASTM D-624 kgf/cm 23 ASTM Line Call D2000-M5-BG608-A14-B14-EO34 info@urubber.com 7 www.urubber.com
EPDM Rubber Sheet High Grade Hardness ASTM D2240 Shore A 77+-5 100 Modulus ASTM D-412 kgf/cm 2 73 kgf/cm 2 100 500 Tear Strengh ASTM D-412 kgf/cm 36 Abrasion Resistance, 6 Lb/3300 RPM ASTM D-1042 C. C. D. 2.06 Anti-Ozone 200ppm No Crack EPDM Rubber Sheet Commercial Grade Hardness ASTM D2240 Shore A 77+-5 100 Modulus ASTM D-412 kgf/cm 2 73 kgf/cm 2 82 188 Tear Strengh ASTM D-412 kgf/cm 24 Abrasion Resistance, 6 Lb/3300 RPM ASTM D-1042 C. C. D. 2.06 Anti-Ozone 50ppm not crack info@urubber.com 8 www.urubber.com
Pure Gum Rubber Sheet From 1 mm to 50 mm Tan,Red Temperature range ASTM D2137 C 45 to 85 Hardness ASTM D2240 Shore A 42 100 Modulus ASTM D-412 psi 150 Tear Strengh ASTM D-412 kgf/cm 2 kgf/cm 160 50 psi lbs/in 3000 280 ASTM Line Call -out D2000-M2-AA4071-A13-B33-F17 Pure Gum has excellent abrasion resistance and tensile strength. Soft, highly abrasion resistant Natural Rubber sheet used when resiliency, wear and cushioning are required. Generally resistant to water,average concentration acids and bases,alcohols and keytones. Not recommended for ozone or oil resistance. Sand Blasting Rubber Sheet Sand Blasting Sheet has excellent abrasion resistance and tensile strength. Soft, highly abrasion resistant Natural Rubber sheet used when resiliency, wear and cushioning are required. Generally resistant to water,average concentration acids and bases,alcohols and keytones. Not recommended for ozone or oil resistance. From 1 mm to 50 mm Tan,Green Temperature range ASTM D2137 C 45 to 85 Hardness ASTM D2240 Shore A 42 100 Modulus ASTM D-412 psi 150 Tear Strengh ASTM D-412 kgf/cm 2 kgf/cm 160 50 psi lbs/in 3000 280 Anti-Abrsion DIN mm3 <120mm3 ASTM Line Call -out D2000-M2-AA4071-A13-B33-F17 info@urubber.com 9 www.urubber.com
Red Chute Lining Red Chute Lining is compounded with highly reinforced pure natural red rubber to combine maximum damping and more reduction with high tear and abrasion resistance.typical applications include hoppers,bins,silos,vibrators,conveyors,hydro cydones,slides and chuts.excellents resistance at amblent temperature to caustic soda,ethyl alcohol and hydrochloric add to concentration up to 37. From 1 mm to 50 mm Tan,Red Temperature range ASTM D2137 C 45 to 85 NBS Abrasion ASTM D1630 100 DIN Abrsion mm3 <40 Hardness ASTM D2240 Shore A 42 100 Modulus ASTM D-412 psi 150 Tear Strengh ASTM D-412 kgf/cm 2 kgf/cm 210 50 psi lbs/in 3000 280 ASTM Line Call -out D2000-4AA430A13B13F17 NR/SBR Rubber Sheet From 1 mm to 50 mm Tan,Red Hardness ASTM D2240 Shore A 55-85 100 Modulus ASTM D-412 kgf/cm 2 24 kgf/cm 2 50 300 Tear Strengh ASTM D-412 kgf/cm 25 info@urubber.com 10 www.urubber.com
Red SBR Rubber Sheet Commercial Grade The industry s general purpose red rubber for common gasketing applications, such as water. Not recommended f li ti ith il S it bl f h t ld t i d l t i Specification : Test Method Unit Test Result Temperature range ASTM D2137 C 35 to 70 Hardness ASTM D2240 Shore A 80+/-5 100 Modulus ASTM D-412 psi 390 kgf/cm 2 42 ASTM D-412 psi 200 Tear Strengh ASTM D-624 lbs/in 125 ASTM Line Call D1330 Grade 1 or AA806Z1 Neoprene (CR) Rubber Sheet COMMERCIAL NEOPRENE SHEET A higher durometer neoprene sheet used for applications requiring higher bolt loads or stress. Industrial grade bl d h d t il i t ti ll i t t t d t id d From 1 mm to 50 mm Temperature range ASTM D2137 C 30 to 100 Hardness ASTM D2240 Shore A 70+/-5 100 Modulus kgf/cm 2 27 psi 380 kgf/cm 2 70 250 psi 1000 250 Tear Strengh ASTM D-624 lbs/in 215 Abrasion Resistance, 6 Lb/3300 RPM ASTM D-1042 C. C. 1.9 ASTM Line Call Out D2000-M2 BC707-A14-B14-F17 info@urubber.com 11 www.urubber.com
Hypalon has excellent weathering properties and is generally resistantt to strong adds and b f h d id l h l lk li d h hl it l ti From 1 mm to 50 mm Temperature range ASTM D2137 C 35 to 130 Hardness ASTM D2240 Shore A 70+/-5 100 Modulus kgf/cm 2 25 psi 360 kgf/cm 2 120 psi 1700 Tear Strengh ASTM D-624 lbs/in 185 Abrasion Resistance, 6 Lb/3300 RPM ASTM Line Call Out Hypalon(CSM) Rubber Sheet COMMERCIAL NEOPRENE SHEET ASTM D-1042 C. C. 1.5 D2000-2CE610A16C12 info@urubber.com 12 www.urubber.com