Seminar on Fuel Cells for Automotive Applications. Department of Chemical Technology

Similar documents
PULSE ELECTRODEPOSITION OF Pt Co CATALYST ONTO GLASSY CARBON FOR OXYGEN REDUCTION REACTION TO USE IN PEMFC

Synthesis and Evaluation of Electrocatalysts for Fuel Cells

HYDROGEN FUEL CELL TECHNOLOGY

Fuel cells From the material to the finished product

Crystalline Thin Films: The Electrochemical Atomic Layer Deposition (ECALD) view. MMALEWANE MODIBEDI

Optimization of operating conditions of a mini fuel cell for the detection of low or high levels of CO in the reformate gas

An Investigation on Metallic Bipolar Plate Corrosion in Simulated Anode and Cathode Environments of PEM Fuel Cells using Potential-pH Diagrams

Trends in the Use of Fuel

Second Generation PEM Fuel Cells and the Indirect Reduction of Oxygen

Premium Act (n ) First periodic report. Publishable summary. Improvement of of stationary PEFC PEFC systems durability (40000h 80% % Load

PEM Fuel Cell Investigation at Chiang Mai University, Thailand

PEFC Technology Development

Supporting Information

Systematic Analysis of Proton Electrolyte Membrane Fuel Cell Systems Integrated with Biogas Reforming Process

ARTEMIS (Contract number )

1 Chapter 1 K. NAGA MAHESH Introduction. Energy is the most essential and vital entity to survive on this Planet.

Novel Fuel Cell MEA Based on Pt-C Deposited by Magnetron Sputtering

Introduction Fuel Cells

Sustainable Energy Science and Engineering Center. Fuel Cell Systems and Hydrogen Production

Programme Review Day 2012 Brussels, 28 & 29 November

S. Authayanun 1 and A. Arpornwichanop 2 1

Optimization of porous current collectors for PEM water electrolysers

Report On Adsorption/Desorption Studies of CO on PEM Electrodes Using Cyclic Voltammetry. Sethuraman, Vijay Anand

Effect of Mass Flow Rate and Temperature on the Performance of PEM Fuel Cell: An Experimental Study

Danish Power Systems. Progress in HT-PEM fuel cells F-Cell, Stuttgart 30 th Sep Hans Aage Hjuler and Thomas Steenberg

UNIT-I ELECTROCHEMISTRY PART-A

Comparison between the article and script of thesis

1. Introduction. 2. Objectives

DBBD17, 28. November 2017

Platinum Nanostructures by Template Wetting Nanofabrication and Their Use in a Miniature Fuel Cell Membrane Electrode Assembly

Fuel Cell Systems: an Introduction for the Engineer (and others)

One-Pot Synthesis, Photoluminescence, and Electrocatalytic Properties of Subnanometer-Sized Copper Clusters. J. Am. Chem. Soc.

Course schedule. Universität Karlsruhe (TH)

SHAPE EFFECT OF CERIA ON THE ACTIVITY OF Au/CeO 2 FOR PREFERENTIAL CO OXIDATION

Wet Cells, Dry Cells, Fuel Cells

NEXPEL. Next Generation PEM Electrolyser for Sustainable Hydrogen Production. 1st YEAR PUBLISHABLE SUMMARY

Anodes for Direct Hydrocarbon Solid Oxide Fuel Cells (SOFC s) Challenges in materials selection and deposition

Material development for emerging energy technologies

Supplementary Information

Fuel Cell R&D at VTT Technical Research Centre of Finland

Programme Review Day 2011 Brussels, 22 November

Underpotential deposition and galvanic replacement for fuel cell catalysis

Towards the development of low cost non-platinum based catalysts for catalytic water splitting

Direct Energy Conversion: Fuel Cells

i ~4 applications WTP Functional materials for sustainable energy Edited by

Fuel Cell Systems: an Introduction for the Chemical Engineer

Fuel Cell - What is it and what are the benefits? Crina S. ILEA, Energy Lab, Bergen

Mass Transport Analysis of a PEM Fuel Cell (High Temperature-PEMFC) Under Different Operating Conditions

PEM Water Electrolysis - Present Status of Research and Development

Accelerated Stress Tests in PEM Fuel Cells: What can we learn from it?

Electrochemistry centered services for fuel cells and other electrochemical power sources

INVESTIGATION OF RUTHENIUM DISSOLUTION IN ADVANCED MEMBRANE ELECTRODE ASSEMBLIES FOR DIRECT METHANOL BASED FUEL CELL STACKS

Laurea in Scienza dei Materiali Materiali Inorganici Funzionali. Hydrogen production and storage: an overview

Influence of Pressure Drop in PEM Fuel Cell Stack on the Heat and Mass Balances in 100 kw Systems

An experimental study of kit fuel cell car to supply power

Advanced Analytical Chemistry Lecture 10. Chem 4631

V.C.1 High Performance, Durable, Low Cost Membrane Electrode Assemblies for Transportation Applications

Development of Thin Film Membrane Assemblies with Novel Nanostructured Electrocatalyst for Next Generation Fuel Cells

Parametric Study of the Hydrogen Fuel Cell Electrochemical Model

Power-MEE Increasing Lifetime and Power Density of PEMWEs by High Performance Membrane Electrode Assemblies

Glass in energy. Glasses for fuel cells and H 2 storage MAT 498

Rune Bredesen Vice President Research

TEPZZ Z96 8 A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (51) Int Cl.: H01M 8/04223 ( ) H01M 8/1018 (2016.

DO CHI LINH

Production and use of low grade hydrogen for fuel cell telecom applications

Fuel Cells in Energy Technology (6) Werner Schindler Department of Physics Nonequilibrium Chemical Physics TU München summer term 2013

P21 WHITE PAPER FUNCTIONAL DESCRIPTION PREMION T FUEL CELL SYSTEM. Copyright 2006 P21 GmbH. All rights reserved.

SMARTCat Systematic, Material-oriented Approach using Rational design to develop break-through Catalysts for commercial automotive PEMFC stacks

Mat E 272 Lecture 26: Oxidation and Corrosion

By janaka. Copyrights HIMT

An Environmentally-Friendly Process for Fuel Cell Electrode Reclamation Dr. Lawrence Shore, BASF Catalysts LLC, Iselin, NJ 08830

MICRO FUEL CELLS for MOBILE POWER Thermal Management in Fuel Cells

Titanium coatings deposited by thermal spraying for bipolar plates of PEM electrolysers

Temperature profiles of an air-cooled PEM fuel cell stack under active and passive cooling operation

Integrated Electrochemical Thermal Ammonia Production Process

Innovative Design of a Compact Reformer for PEMFC

FABSTRACT. Technical Overview of Fuel Cell Systems: How Computer Simulation is Used to Reduce Design Time

The Role of Fuel Cells in a Sustainable Energy Economy

Development of ruthenium-based bimetallic electrocatalysts for oxygen reduction reaction

Titanium coatings deposited by thermal spraying for bipolar plates of PEM electrolyzers

Low Cost Bipolar Plates for Large Scale PEM Electrolyzers

Methods of Corrosion Control. Corrosion Control or Corrosion Management?

CH2356 Energy Engineering Fuel Cell. Dr. M. Subramanian

High-temperature PEM Fuel Cells

Preparation and characterization of metal supported solid oxide fuel cells with screen-printed electrodes and thin-film electrolyte

Polymer Electrolyte Fuel Cell RESEARCH at NEWCASTLE

Direct Ethanol Fuel Cell (DEFC) Assembled with Ceramic Membrane-Catalyst

The Effects of the Adding V2O5 on the Oxide Semiconductor Layer of a Dye-sensitized Solar Cell

Prof. Mario L. Ferrari

Thermally-Enhanced Generation of Solar Fuels

Physics 100 Lecture 24. Fusion Energy and Fuel Cells April 30, 2018

AC : DESIGN OF AN EXPERIMENTAL POWER SOURCE USING HYDROGEN FUEL CELLS

3- PHOSPHORIC ACID FUEL CELLS

Batteries and fuel cell research

New Energy Conservation Technologies

Fuel Cells 101. Hydrogen Fuel Cell Educational Outreach Workshop Presented by David Cooke October 21 st, 2013

Fuel Cell Technology

Final Year Progress Report

Lower Cost Higher Performance Graphite for LIBs. Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017

Advanced Analytical Chemistry Lecture 16. Chem 4631

Transcription:

Seminar on Fuel Cells for Automotive Applications Department of Chemical Technology 1

Dept. of Chemical Technology Established in 1959 The department is striving for pursuing the excellence in research area of Fuel and Energy Technology together with maintaining the quality of the environment. 2

Faculty members 5 Professors 10 Assoc Professors 1 Asst Professor 2 Instructors 3

Research areas 4

Electrochemical devices Group 5

Members Prof. Dr. Pornpote Piumsomboon Prof. Dr. Mali Hunsom Assoc. Prof. Dr. Kejvalee Pruksathorn Assoc. Prof. Dr. Nattaya Pongstabodee Assoc. Prof. Dr. Nisit Tantavichet Dr. Nuttapol Pootrakulchot 76

Goal To develop expertise in electrochemical processes: such as fuel cell, photovoltaic cell and battery technologies and to support the knowledge and technology to the Thai society. 7

Objectives (1) To produce reliable and cost-effective fuel cells, including PEM fuel cell and DM fuel cell, using domestically available materials To develop novel techniques to improve the efficiency of batteries, such as valve-regulated lead-acid and Lipolymer batteries 8

Objectives (2) To further enhance the overall energy conversion efficiency of dye-sensitized photovoltaic cells by improving their sensitizing capabilities as well as to develop the large scale devices based on this technology To develop skilled workforce for fuel cell, photovoltaic cell and battery industries and to instill environmental responsibility in them 9

Fuel cell system Source: http://pubs.rsc.org/is/content/articlelandin g 10

Source: http://www.thirdorbitpower.com/pem_mechanism.html 11

ORR catalyst development Electrocatalytic activity of Pt-Pd electrocatalysts for the oxygen reduction reaction in proton exchange membrane fuel cells: Effect of supports Effect of MO (M = Ce, Mo, Ti) layer on activity and stability of PtCo/C catalysts during an oxygen reduction reaction Stability of TiO Promoted PtCo/C catalyst for oxygen reduction reaction Incorporation of TiO into the PtPd/C catalyst layer for improvement ORR activity and water management Activity and stability of Pt Cr/C catalyst for oxygen reduction reaction: Effect of the Pt: Cr ratio and heat treatment atmosphere 12

HOX catalyst development Applying a face-centered central composite design to optimize the preferential CO oxidation over a PtAu/CeO 2-ZnO catalyst Preferential oxidation of carbon monoxide in simulated reformatted gas over PtAu/CexZnyO2 catalysts Catalytic performances of Pt-Pd/CeO2 catalysts for selective CO oxidation Preferential oxidation of carbon monoxide over Pt, Au monometallic catalyst, and Pt-Au bimetallic catalyst supported on ceria in hydrogen-rich reformate Selective oxidation of CO to CO2 over Cu-Ce-Fe-O compositeoxide catalyst in hydrogen feed stream 13

MEA preparation Optimum Condition of Membrane Electrode Assembly Fabrication for PEM Fuel Cell Novel application of Hicon Black in PEMFC microporous sublayer: Identification of the key variables in membrane electrode preparation for PEM fuel cells by a factorial design 14

Electrode preparation Sublayers for Pt catalyst electrodeposition electrodes in PEMFC Catalyst electrode preparation for PEM fuel cells by electrodeposition Preparation of Pt/C catalysts by electroless deposition for proton exchange membrane fuel cells Pulse reverse electrodeposition of Pt-Co alloys onto carbon cloth electrodes Preparation of Pt-Co alloy catalysts by electrodeposition for oxygen reduction in PEMFC 15

Fuel cell system studies Geometry and pattern of gas flow channel on the performance of PEM fuel cell 200W PEM Fuel Cell Stack with Online Model-Based Monitoring System Road testing of a three-wheeler driven by a 5 kw PEM fuel cell in the absence and presence of batteries Effect of Channel Designs on Open-Cathode PEM Fuel Cell Performance: A Computational Study 16

Fuel Cell Vehicle Supported by DEDE, MOE 17

H 2 production Optimization of methanol steam reforming over a Au/CuO-CeO 2 catalyst by statistically designed experiments Hydrogen production via methanol steam reforming over Au/CuO, Au/CeO 2, and Au/CuO-CeO 2 catalysts prepared by depositionprecipitation The activities of Cu-based Mg Al layered double oxide catalysts in the water gas shift reaction Statistical optimization by response surface methodology for water-gas shift reaction in a H2-rich stream over Cu-Zn-Fe composite-oxide catalysts 18

Batteries Polyaspartate as a gelled electrolyte additive to improve the performance of the gel valve-regulated lead-acid batteries under 100Â % depth of discharge and partial-state-of charge conditions Influence of fumed silica and additives on the gel formation and performance of gel valve-regulated lead-acid batteries Gelled electrolytes for use in absorptive glass mat valve-regulated lead-acid (AGM VRLA) batteries working under 100% depth of discharge conditions 19

Dye-sensitized solar cell A polydiacetylene-nested porphyrin conjugate for dyesensitized solar cells Porphyrin containing lipophilic amide groups as a photosensitizer for dye-sensitized solar cells Photosensitizing triarylamine- and triazine-cored porphyrin dimers for dye-sensitized solar cells A new heteroleptic ruthenium sensitizer for transparent dyesensitized solar cells 20

Facilities Potentiostat PGstat 30 Inkjet printer Fuel cell test station Ultrasonic spray 21

Outputs International publications: > 40 Research projects: > 15 - Thailand Research Fund (TRF) - Energy Policy and Planning office (EPPO) - National Research Council of Thailand (NRCT) - Department of Alternative Energy Development and Efficiency (DEDE) 22

Collaborations Ecole Nationale Supérieure des Ingénieurs en Arts Chimiques Et Technologiques, France Department of Chemical Engineering, Curtin University, Australia. University of Innsbruck, Austria Yonsei University, Korea Department of Electrical Engineering, Chulalongkorn University Department of Mechanical Engineering, Chulalongkorn University 23

Thank you for your attention 24

PEM fuel cell Source http://nptel.ac.in/courses/103102015/3 25

Fuel cell zoom in https://en.wikipedia.org/wiki/membrane_e lectrode_assembly 26

Fuel cell stack Source http://www.pragma-industries.com/products/ocs/ 27

PEM fuel cell 28