Application and Design Stationary Louver J Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates, drainable head, J style blades, sloped sill and high free area to provide maximum resistance to rain and weather while providing minimum resistance to airflow. The is an extremely efficient louver with AMCA LICENSED PERFORMANCE DATA enabling designers to select and apply with confidence. Standard Construction Frame........Heavy gauge extruded 6063-T5 aluminum, 2 in. x 0.063 in. nominal wall thickness Blades........J style, heavy gauge extruded 6063-T5 aluminum, 0.063 in. nominal wall thickness, positioned at 45º angles on approximately 3 in. centers Construction... Mechanically fastened Birdscreen.....3/4 in. x 0.051 in. flattened expanded aluminum in removable frame, inside mount (rear) Finish.........Mill Minimum Size..6 in. W x 6 in. H Maximum Single Section Size...120 in. W or 120 in. H. (limited to 70 ft. sq.) Options (at additional cost) A variety of bird and insect screens Blank off panel Clip angles Extended sill Filter rack Flanged frame Glazing adaptor Hinged frame Security bars Welded construction A variety of architectural finishes including: Clear anodize Integral color anodize Baked enamel paint Kynar paint *Width and height dimensions furnished approximately ¼ inch under size.
PERFORMANCE DATA Free Area Chart (Sq. ft.) Height in Inches Width in Inches 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 6 0.02 0.06 0.09 0.13 0.16 0.20 0.23 0.26 0.30 0.33 0.37 0.40 0.43 0.47 0.50 0.54 0.57 0.61 0.64 0.67 12 0.08 0.23 0.38 0.53 0.68 0.83 0.94 1.09 1.24 1.39 1.54 1.69 1.80 1.95 2.10 2.25 2.40 2.55 2.66 2.81 18 0.15 0.42 0.69 0.96 1.24 1.51 1.71 1.98 2.26 2.53 2.80 3.07 3.28 3.55 3.82 4.09 4.36 4.64 4.84 5.11 24 0.21 0.59 0.98 1.36 1.75 2.13 2.42 2.81 3.19 3.58 3.96 4.35 4.64 5.02 5.41 5.79 6.18 6.56 6.85 7.24 30 0.27 0.77 1.26 1.76 2.25 2.75 3.12 3.62 4.12 4.61 5.11 5.61 5.98 6.47 6.97 7.47 7.96 8.46 8.83 9.33 36 0.32 0.91 1.49 2.08 2.67 3.26 3.70 4.28 4.87 5.46 6.05 6.63 7.07 7.66 8.25 8.84 9.42 10.01 10.45 11.04 42 0.38 1.08 1.78 2.47 3.17 3.87 4.40 5.09 5.79 6.49 7.19 7.89 8.41 9.11 9.81 10.51 11.21 11.91 12.43 13.13 48 0.45 1.27 2.09 2.92 3.74 4.57 5.19 6.01 6.83 7.66 8.48 9.31 9.93 10.75 11.57 12.40 13.22 14.05 14.66 15.49 54 0.51 1.44 2.37 3.31 4.24 5.18 5.88 6.81 7.75 8.68 9.61 10.55 11.25 12.18 13.12 14.05 14.99 15.92 16.62 17.55 60 0.57 1.61 2.66 3.71 4.76 5.80 6.59 7.63 8.68 9.73 10.78 11.82 12.61 13.66 14.70 15.75 16.80 17.84 18.63 19.68 66 0.63 1.79 2.95 4.11 5.27 6.43 7.30 8.46 9.63 10.79 11.95 13.11 13.98 15.14 16.30 17.46 18.62 19.78 20.65 21.81 72 0.68 1.93 3.18 4.42 5.67 6.92 7.86 9.11 10.36 11.61 12.86 14.11 15.04 16.29 17.54 18.79 20.04 21.29 22.23 23.48 78 0.74 2.10 3.46 4.83 6.19 7.55 8.58 9.94 11.30 12.67 14.03 15.39 16.41 17.78 19.14 20.50 21.87 23.23 24.25 25.62 84 0.80 2.29 3.78 5.26 6.75 8.23 9.35 10.83 12.32 13.80 15.29 16.77 17.89 19.37 20.86 22.34 23.83 25.31 26.43 27.91 90 0.87 2.46 4.06 5.66 7.26 8.86 10.06 11.66 13.25 14.85 16.45 18.05 19.25 20.85 96 0.93 2.64 4.35 6.06 7.77 9.48 10.76 12.47 14.18 15.89 17.60 19.31 20.59 22.30 102 0.98 2.78 4.58 6.38 8.18 9.98 11.33 13.13 14.93 16.73 18.53 20.33 21.68 23.49 108 1.04 2.95 4.86 6.77 8.68 10.60 12.03 13.94 15.85 17.77 19.68 21.59 23.02 24.94 114 1.10 3.14 5.18 7.22 9.25 11.29 12.82 14.86 16.90 18.93 20.97 23.01 24.54 26.57 120 1.16 3.31 5.46 7.61 9.75 11.90 13.51 15.66 17.81 19.95 22.10 24.25 25.86 28.01 Greenheck Fan Corporation certifies that the EDJ- 202 louvers shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance and water penetration ratings. Airflow Resistance (Standard Air -.075 lb/ft 3 ) Water Penetration (Standard Air -.075 lb/ft 3 ) Pa 200 in. wg 1 0.9 0.8 0.7 0.6 0.5 Test Size 48 in. x 48 in. Standard Air -.075 lb/ft 3 Test size 48 in. x 48 in. Test duration of 15 min. ml/m2 80 oz/ft2 0.30 0.25 Test Size 48 in. x 48 in. Test Period 15 minutes Standard Air -.075 lb/ft 3 Static Pressure Drop 100 90 80 70 60 50 40 30 20 0.4 0.3 0.2 0.1 0.09 0.08 0.07 Exhaust Intake Water Penetration per Unit Free Area 60 40 20 0.20 0.15 0.10 0.05 0.06 10 9 8 7 6 5 0.05 0.04 0.03 0.02 ft/min m/s 200 300 400 500 600 700 800 900 1000 2000 3000 2 3 4 5 6 7 8 9 10 Free Air Velocity Model resistance to airflow (pressure drop) varies depending on louver application (air intake or air exhaust). Free area velocities (shown) are higher than average velocity through the overall louver size. See louver selection information (Test Figure 5.5). 0 m/s: 0.00 ft/min: 800 850 900 950 1000 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 Free Area Velocity The AMCA Water Penetration Test provides a method for comparing various louver models and designs as to their efficiency in resisting the penetration of rainfall under specific laboratory test conditions. The beginning point of water penetration is defined as that velocity where the water penetration curve projects through.01 oz. of water (penetration) per sq. ft. of louver free area. * The beginning point of water penetration for Model is 869 fpm free area velocity. These perfor mance ratings do not guarantee a louver to be weather proof or stormproof and should be used in combination with other factors including good engineering judgement in selecting louvers.
PRODUCT DETAILS Maximum Size and Installation Information Maximum single section size for model is 120 in. W x 84 in. H or 84 in. W x 120 in. H (70 sq. ft). Larger openings require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand a 25 PSF wind-load (please consult Greenheck if the louvers must withstand higher wind-loads). Structural reinforcing members may be required to adequately support and install multiple louver panels within a large opening. Structural reinforcing members along with any associated installation hardware is not provided by Greenheck unless indicated otherwise by Greenheck. Additional information on louver installation may be found in AMCA Publication #501, Louver Application Manual. Minimum Single Section Size 6 in. W x 6 in. H Maximum Single Section Size 70 ft. sq.
PRODUCT DETAILS
OPTION DRAWINGS FINISHES Finish Type Description/Application Color Selection Standard Warranty (Aluminum) 2-coat 70% KYNAR 500 /HYLAR 5000 AAMA 2605 Dry film thickness 1.2 mil. (AKA: Duranar, Fluoropon, Trinar, Flouropolymer, Polyvinylidene Fluoride, PVDF2) Best. The premier finish for extruded aluminum. Tough, long-lasting coating has superior color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Standard Colors: Any of the 24 standard colors shown can be furnished in 70% or 50% KYNAR 500 /HYLAR 5000 or Baked Enamel. 10 Years (Consult Greenheck for availability of extended warranty) 2-coat 50% KYNAR 500 /HYLAR 5000 AAMA 2604 Dry film thickness 1.2 mil. (AKA: Acroflur, Acrynar ) Baked Enamel AAMA 2603 Dry film thickness 0.8 mil. (AKA: Acrabond Plus, Duracron ) Better. Tough, long-lasting coating has excellent color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Good. Provides good adhesion and resistance to weathering, corrosion and chemical stain. 2-Coat Mica: Greenheck offers 9 standard 2- coat Mica colors. Other colors are available. Consult Greenheck for possible extra cost when selecting non-standard colors or special finishes. 5 Years 1 Year Integral Color Anodize AA-M10C22A42 (>0.7 mil) Clear Anodize 215 R-1 AA-M10C22A41 (>0.7 mil) Clear Anodize 204 R-1 AA-M10C22A31 (0.4-0.7 mil) Industrial coatings Mill Two-step anodizing is produced by following the normal anodizing step with a second, colorfast process. Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Light, Medium or Dark Bronze; Champagne; Black Clear Clear Greenheck offers a number of industrial coatings such as Hi-Pro Polyester, Epoxy, and Permatector. Consult a Greenheck Product Specialist for complete color and application information. Materials may be supplied in natural aluminum or galvanized steel finish when normal weathering is acceptable and there is no concern for color or color change. 5 years 5 years 1 Year Consult Greenheck Finishes meet or exceed AAMA 2605, AAMA 2604, and AAMA 2603 requirements. Please consult www.greenheck.com for complete information on standard and extended paint warranties. Paint finish warranties are not applicable to steel products. n/a December 2015 Copyright 2015 Greenheck Fan Corporation Greenheck Fan Corporation reserves the right to make product changes without notice.