316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections DESCRIPTION The D5100 series from Measurement Specialties sets the price and performance standard for differential pressure transducers used in demanding environments. The amplified model of the D5100 series exceeds the latest heavy industrial CE requirements including surge protection and reverse polarity protection. The amplified and mv output pressure transducers both have two pressure ports for high and low pressures and all wetted parts are made of 316L stainless steel. They come in a variety of electrical configurations and ranges from 1 to 500 psi (up to 35 Bar). FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range Excellent Stability Various Output, Pressure Ports and Electrical Connections APPLICATIONS Process Controls Tank Level Measurement Filter Performance Monitoring Corrosive Fluids and Gas Measurement Systems Flow Measurements STANDARD RANGES Range psid Range BarD 0 to 1 0 to 0.07 0 to 5 0 to 0.35 0 to 15 0 to 1 0 to 30 0 to 2 0 to 50 0 to 3.5 0 to 100 0 to 7 0 to 300 0 to 20 0 to 500 0 to 35 1/7
PERFORMANCE SPECIFICATIONS (AMPLIFIED OUTPUT) Typical Drive: See Output Options Table Ambient Temperature: 25 C (unless otherwise specified) 1 PSI 5 PSI PARAMETERS MIN TYP MAX MIN TYP MAX Accuracy -0.3 0.3 5psi: -0.25 0.25 15psi: -0.1 0.1 UNITS NOTES %Span 1 Isolation, Body To Any Lead 1 1 MΩ @25VDC Pressure Cycles 1.00E+6 1.00E+6 0-FS Cycles Proof Pressure (High Side) 10X 3X Rated 2 Proof Pressure (Low Side) 10X 3X Rated 3 Burst Pressure (High Side) 12X 4X Rated 2 Burst Pressure (Low Side) 12X 4X Rated 3 Line (common) Pressure 1000 1000 psi Line Pressure Effect on Zero 0.004 5psi: 0.0008 TYP 15psi: 0.0005 TYP %Span/psi Long Term Stability ±0.25 ±0.1 %Span/year Total Error Band -1.5 1.5-1 1 %Span Compensated Temperature 0 50 0 70-20 +85 Operating Temperature -40 +85-40 +125 C 4 Storage Temperature -40 +125-40 +125 ºC 4 Load Resistance (R L) R L > 100k Ω 5 Sensor Type Pressure Port Material Bandwidth Shock Vibration Differential Pressure Sensor with Unidirectional Calibration 316L Stainless Steel DC to 1KHz (typical) 50g, 11 msec Half sine shock per MIL-STD-202F, Method 213B, Condition A ±20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L Notes 1. Combined linearity, hysteresis and repeatability using Best Fit Straight Line. 2. 1000psi, whichever is less. 3. 150psi, whichever is less. 4. Except cable 105 C Max. 5. Voltage output. CE Compliance IEC 55022 Emissions Class A & B IEC 61000-4-2 Electrostatic Discharge Immunity (6kV contact/8kv air) IEC 61000-4-3 EM Field Immunity (30V/m) IEC 61000-4-4 Electrical Fast Transient Immunity (1kV) IEC 61000-4-5 Surge (1kV) IEC 61000-4-6 Conducted Immunity (10V) IEC 61000-4-9 Pulsed Magnetic Field Immunity (100A/m) C Pressure Port Options Dim C (inches) [mm] Electrical Connection Options 2 = 1/4-19 BSPP Male 3.08 [78.3] 1 = 2 ft cable 5 = 1/4-18 NPT Male 3.18 [80.8] 4 = Packard Connector F = 1/4-19 BSPP Female 2.18 [55.42] 5 = Bendix Connector G = 1/4-18 NPT Female 2.18 [55.42] 6 = Hirschmann Connector 2/7
DIMENSIONS (AMPLIFIED OUTPUT) 3/7
DIMENSIONS (AMPLIFIED OUTPUT) 4/7
OUTPUT OPTIONS (AMPLIFIED OUTPUT) Supply(V) Code Output MIN TYP MAX 3 0.5 4.5V (ratiometric) 4.75 5.00 5.25 4 1 5V 8 15 30 5 4 20mA 9 15 30 PERFORMANCE SPECIFICATIONS (mv OUTPUT) Supply Voltage: 10Vdc Ambient Temperature: 25 C (unless otherwise specified) PARAMETERS 1 PSI 5 PSI MIN TYP MAX MIN TYP MAX UNITS NOTES Supply Voltage 10 14 10 14 VDC Zero Pressure Output -2.0 0 2.0 5psi: -2.0 0 2.0 15psi: -1.0 0 1.0 mv Span 77 80 83 5psi: 98 100 102 15psi: 99 100 101 mv Accuracy -0.3 0.3 5psi: -0.25 0.25 15psi: -0.1 0.1 %Span 1 Input Resistance 5.5 9.0 12.5 5.5 9.0 12.5 KΩ Output Resistance 4.0 30.0 5psi: 4.0 30.0 15psi: 4.0 25.0 KΩ Isolation, Body To Any Lead 50 50 MΩ @50VDC Pressure Cycles 1.00E+6 1.00E+6 0-FS Cycles Proof Pressure (High Side) 10X 3X Rated 2 Proof Pressure (Low Side) 10X 3X Rated 3 Burst Pressure (High Side) 12X 4X Rated 2 Burst Pressure (Low Side) 12X 4X Rated 3 Line (common) Pressure 1000 1000 psi Line Pressure Effect on Zero 0.004 5psi: 0.0008 TYP 15psi: 0.0005 TYP %Span/psi Long Term Stability ±0.25 ±0.1 %Span/year Temperature Coefficient Span -1.5 1.5 5psi: -1.5 1.5 15psi: -1.0 1.0 %Span Temperature Coefficient Offset -2.5 2.5 5psi: -1.5 1.5 15psi: -1.0 1.0 %Span Output Load Resistance 5 5 MΩ Output Noise (10Hz to 1KHz) 1.0 1.0 uv p-p Response Time (10% to 90%) 0.1 0.1 ms Compensated Temperature 0 50 5psi: 0 70 15psi: -20 85 C Operating Temperature -40 +85-40 +125 C Storage Temperature -40 +125-40 +125 ºC 4 Voltage Breakdown 500V rms@50hz, Leakage Current <1mA Sensor Type Differential Pressure Sensor with Unidirectional Calibration Pressure Port Material 316L Stainless Steel Shock 50g, 11 msec Half sine shock per MIL-STD-202F, Method 213B, Condition A 5/7
Notes 1. Combined linearity, hysteresis and repeatability using Best Fit Straight Line. 2. 1000psi, whichever is less. 3. 150psi, whichever is less. 4. Except cable 105 C Max. Pressure Port Options Dim C (inches) [mm] Electrical Connection Options 2 = 1/4-19 BSPP Male 3.08 [78.3] 1 = 2 ft cable 5 = 1/4-18 NPT Male 3.18 [80.8] F = 1/4-19 BSPP Female 2.18 [55.42] G = 1/4-18 NPT Female 2.18 [55.42] DIMENSIONS (mv OUTPUT) 6/7
OUTPUT OPTIONS (mv OUTPUT) Supply(V) Code Output MIN TYP MAX 2 80mV (1psi), 100mV ( 5psi) [ratiometric] 10 14 ORDERING INFORMATION D5131-000005-300PD Type (D = Differential) Units (P = psi, B = Bar) Pressure Range (See Pressure Range Table) Pressure Port (See Pressure Port Options Table) Specials (nnnnn = Custom Drawing) Connection (See Electrical Connections Table) Output (See Output Options Table) Model The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.