CARPENTRY WORKPLACE TASKS - CHECK LIST (Note: for employer reference only) CPCCOHS2001A OHS requirements in the construction industry This Unit of competency specifies the outcomes required to carry out OHS requirements through safe work practices at any ON or OFF site construction workplace. Duty of care for self & others Identify & assess risks Identify hazardous materials & other hazards on work sites Plan & prepare for safe work practices Apply safe work practices Follow emergency procedures CPCCCA2002A Use Carpentry Tools & Equipment This Unit of competency specifies how to safely select & use carpentry tools & equipment. It includes hand tools, power tools, pneumatic tools, plant & equipment. Plan & prepare Identify & select hand, power & pneumatic tools Use tools safely Identify, select & use plant & equipment CPCCCM2008A- Erect and Dismantle Restricted Height Scaffolding This unit of competency specifies the outcomes required to erect and dismantle restricted height scaffolding (to a height of 4 metres) to provide work platforms for various occupational applications. It includes placement of safety barriers. Erect scaffolding Inspect, repair and alter scaffolding Dismantle scaffolding CPCCCM1006A- Work Safely at Height This unit require that you demonstrate the ability to work safely on construction sites where the work activity involves working above 1.5 metres from ground level and where fall protection measures are required. Workplace Tasks Identify work area requirements Access work area making proper use of fall protection Conduct work tasks with appropriate fall protection in place at all times CPCCCCA3002A- Carry Out Setting Out This unit of competency requires you to identify site boundaries and survey indicators. It includes the ability to measure, establish and set up profiles (hurdles) for the set out of a domestic building. for work Identify and indicate site boundaries Set out first building line Set out right angle corner (3:4:5) Install remaining building lines correctly Check set out for square 1 P age of 6
CPCCCA3023A- Carry Out Levelling Operations This unit of competency requires you to conduct levelling procedures using the rise and fall method and the height of instrument method for establishing correct set out of buildings. It includes the set-up, testing and use of levelling devices and undertaking closed traverses using a range of levelling equipment.. Set up and test levelling equipment Conduct levelling procedures using rise and fall method Conduct levelling procedures using height of instrument method Calculate distances using stadia lines CPCCM2001A Read and Interpret Plans and Specifications This unit of competence includes the ability to read and interpret plans and specifications relevant to construction operations. It includes the identification of types of plans and drawings and their functions, the recognition of commonly used symbols and abbreviations, the identification of key features and specifications on site plan, the comprehension of written job specifications. Identify types of drawings and their functions Recognise amendments Recognise commonly used symbols and abbreviations Locate and identify key features on a site plan Identify project requirements Read and interpret job specifications CPCCCA3003A- Install Flooring Systems This unit requires you to plan, prepare, set out and install timber flooring systems to support imposed loads. It includes application in brick veneer, full masonry and timber frame construction. Set out sub-floor frame Install timber bearers Install timber floor joists Install flooring CPCCCA3004A Construct Wall frames This unit of competency requires that you demonstrate the ability to plan, prepare, set out, construct and erect load bearing and non-load bearing wall frames for the different types of loadings determined by the roof top and bracing configuration involving both timber and metal frames. Set out and position wall plates and studs Make suitable allowance for window and door openings Safely construct walls to job specifications Safely erect walls. CPCCCA3006A- Erect Roof Trusses This unit of competency requires that you demonstrate the ability to select, set out, erect and brace timber and metal roof trusses to accommodate roof coverings for waterproofing purposes. It includes gable, hip and valley, and hip roofing types. Workplace Tasks Erect roof trusses 2 P age of 6
CPCCCA3005A- Construct Ceiling Frames To plan, prepare, set out, construct and erect ceiling frames to accommodate ceiling joists, hanging beams, strutting beams and composite beams. It includes selection of members and setting out of the ceiling frame in conjunction with the roof members. Workplace Tasks Locate ceiling joists. Install hanging beams. CPCCCA3007A- Construct Pitched Roofs This unit of competency requires that you demonstrate the ability to select, set out, construct and erect pitched roofs to accommodate roof coverings. It includes scotch valley, gable, hip and valley, broken hip and valley and combinations thereof. Set out and prepare members for pitched roof erection including scotch valley, gable, hip and valley, broken hip and valley Erect roof Install under purlins, collar ties, struts and valley boards. CPCCCA3008A- Construct Eaves This unit require that you demonstrate the ability to prepare, set out and construct eaves, including the cutting and fixing of fascias and barges to provide a finish between the wall and the roof. It includes boxed eaves and the finish to gable ends.. Install fascia and barge. Construct framework for eaves or soffits. Line and clad eaves and soffits.. CPCCCO2003A Carry Out Concreting To Simple Forms This unit of competency specifies the outcomes required to safely install formwork, reinforcement and place and finish concrete for the construction of minor slabs, pathways and other minor works to a specified design finish. The unit includes positioning the truck, placing concrete from truck to work area, spreading concrete and cleaning up site.. Erect and strip simple formwork. Place and tie reinforcement. Place concrete.. CPCCCA3018A- Construct, Erect and Dismantle Formwork for Stairs and Ramps Construct, erect and dismantle formwork for stairs and ramps to form up the concrete that may involve one or more flights in order to provide access between floors and/or landings. It includes timber, metal or prefabricated formwork.. Set out formwork. Assemble and erect formwork. Strip formwork.. 3 P age of 6
CPCCCA3009A- Construct Advanced Roofs This unit includes demonstrating then ability to plan, prepare, set out and construct pitched roofs on irregular plan building shapes which may have skewed, splayed or hexagonal ends. It includes such roofs that include dormer windows and may be of gable, hip, hip and valley, or combinations of these. Set out and prepare members for roof erection (must include a hip end other than square on plan i.e. hexagonal or octagonal) Erect roof Install roof support including under purlins, collar ties, struts and valley boards CPCCCA3001A- Carry Out General Demolition of Minor Building Structures This unit requires you to carry out general demolition work of minor building structures to facilitate alterations, extensions and additions to a building. It includes work being completed to a work schedule, plans and specifications. Demolish minor building structures safely and in accord with job requirements CPCCCM2002A- Carry Out Excavation This unit requires you to undertake hand excavation tasks and excavations requiring the assistance of plant machinery to form excavations for footings, and the provision of services.. Locate excavation site and erect safety equipment. Dig excavations.. CPCCCA3010A- Install and replace windows and doors This unit require that you demonstrate the ability to plan, prepare, set out and install window and door units, and to replace window and door units to different types and styles of buildings for access, security, weather proofing and replacement of defective windows and doors. It includes timber and metal window and door units.. Install window units to frame. Replace window units/door frames. Prepare door opening, and construct and fix jamb. Install door and door unit.. CPCCCA3017A- Install Exterior Cladding This unit includes demonstrating then ability to install material finishes applied to an external framed wall surface for the purpose of weatherproofing and securing the building. It includes sheet material, weatherboarding of timber, plastic, metal and fibre cement sheet. Straighten and prepare exterior walls Fix edge finishing, flashing and insulation Set out, cut and fix horizontal weatherboards Fix panelling 4 P age of 6
CPCCCA3012A- Frame and fit wet area fixtures This unit require that you demonstrate the ability to install supporting framework for fixtures and flashings associated with the wet area construction for a bath, shower base and sink or basin unit, and preparation for wet area linings. It includes bathroom, laundry, shower, toilet and en-suite wet areas. Set out wet area installation Prepare for bath installation Prepare for shower base installation Prepare for sink installation CPCCCA2001A Handle Carpentry Materials This Unit of competency specifies how to safely manually handle, store and apply environmental management principles associated with carpentry materials and components. Plan & prepare work Manual handle, sort & stack material correctly Prepare for mechanical handling of materials Handle & remove waste materials safely CPCCCM1004A Conduct Workplace Communications This Unit of competency specifies the outcomes required to communicate effectively with others in a construction workplace environment. It includes gathering, conveying & receiving information Gather convey and receive information Carry out face to face routine communication Apply visual communication Participate in simple on site meeting process Gather convey and receive information CPCCCM3001A- Operate Elevated Work Platforms This unit includes demonstrating then ability to safely and effectively operate some types of elevated work platforms (EWPs) in a variety of different terrains and situations to access isolated work areas; it includes locating, setting up, operating and shutting down EWPs. Conduct routine checks of platform Locate equipment in place for work application Elevate platform to work location Lower platform and shut down CPCCCM1005A- Carry Out Measurements and Calculations This unit of competency specifies the outcomes required to carry out measurements and perform simple calculations to determine task and material requirements for a job in a construction work environment. Obtain measurements Perform calculations including area, volume, perimeter, circumference and ratios Estimate approximate quantities 5 P age of 6
CPCCCM1002A Work Effectively & Sustainably in the Construction Industry This Unit of competency specifies the outcomes required to prepare & sustain effective work within the construction industry. It covers individual work, working in a team & career path improvement activities Identify industry structure, occupations, job roles & work conditions Accept responsibility for own workload Work in team Identify own development needs Identify current resource use & identify opportunities to improve resource efficiency Comply with environmental regulations CPCCCA3013A- Install Lining, Panelling and Moulding This unit includes demonstrating the ability to prepare, set out and install lining and panelling to either masonry or timber/metal framed walls. It includes the installation of mouldings to provide decorative finishes.. Prepare surface for lining/panelling. Install lining/panelling. Cut and fix standard architrave mouldings.. CPCCM1003A Plan and Organise Work This unit of competency supports the attainment of capabilities and understanding to prioritise work tasks and organise time and resources to undertake given tasks effectively and cooperatively with other team members. Identify task requirements Plan steps to complete tasks Work activity is organised in accord with safety and quality requirements Documentation completed according to organisational policy Review planning and organising process CPCCCM2007A- Use Explosive Power Tools This unit requires that you demonstrate the safe and effective operation of explosive power tools (EPT), used to fasten materials or fix fasteners to bases. It includes both direct action and indirect action explosive powered fastening tools. Set out fasteners Use EPT Secure and store equipment and charges Maintain EPT and kit CPCCCA3016A- Construct Timber External Stairs This unit includes demonstrating the ability to construct and install timber external stairs that may involve one or more flights, to provide access into a structure. It includes timber treads and stringers.. Set out and prepare material. Assemble and erect stairs. Fit handrails, balustrade and finish.. 6 P age of 6