ESS offers a wide variety of programs and activities, including:

Programs and Activities ESS offers a wide variety of programs and activities, including: For more information about any of the programs, visit www.aucegypt.edu/sse/ess

INTENSIVE COURSES General Information and Fees Who Should Attend ESS courses are designed primarily for engineers and scientists. However, technicians, lawyers and other professionals who are working in industry, governmental agencies, universities and research institutes may also find them helpful in strengthening their background in a given topic. Method of Instruction Instructors use lectures, case studies, discussions and visual aids to present the course material. The teaching materials are in English. However, to improve communication between lecturers and participants, both Arabic and English may be used in instruction. Course participants may use AUC s laboratories and computer facilities. Time and Duration The courses are designed to be held over five days for 30 hours of instruction, with classes usually beginning at 9 am and ending at 3 pm. In some cases, a course may begin at 3 pm and end at 9 pm. Online Assessment-Based Courses: ESS offers e-learning opportunities for busy professionals and others who cannot attend classes. Courses are held online through Blackboard and Moodle, which are class management systems that help instructors and trainees share course material, assignments, examinations and grades. A select number of intensive courses are made available online. Online tutorials are available to those who have no previous experience with online training. For an updated list of online courses, check the ESS website: www.aucegypt.edu/sse/ess. Application Deadline Applications are accepted on a first-come, first-served basis. The deadline for registraton is one week before the first day of the course. Course Fees The tuition fees for each course are LE 2,650 for Egyptians and $ 750 for non-egyptians. Fees should be paid in cash at Engineering and Science Services or by check payable to AUC. Letters of authorization from companies are acceptable. Participants are urged to pay the fees at least three days before the course begins. Cancellation and Refund Policy To guarantee a full refund, cancellations must be made no later than at least two working days prior to the start of the course. Cancellations after this point are entitled to a partial refund only. Refunds are not granted once the course has begun. All requests for refunds must be accompanied by the original payment receipt, the course materials and a copy of the participant s national ID. Following a confirmed refund, a check will be issued in the participant s name or company approximately a month after the official request. Certificate of Participation A certificate of participation is presented upon successful completion of each course. Those who successfully complete a series of five courses and submit an acceptable project will be awarded a specialization certificate.

Professional Development Units (PDUs) Courses Offering Professional Development Units (PDUs) Code CAEN-012 Course Name PRIMAVERA Project Management (Level I) 45 PDU s استخدام الPRIMAVERAفي إدارة المشروعات )المستوى األول( Fees LE $ 3600 980 Date Nov 4-8, April 14 18, CAEN-011 PRIMAVERA Project Management (Level II) 45 PDU s استخدام الPRIMAVERAفي إدارة المشروعات )المستوى الثانى( 3600 980 Feb 3 7, May 19 23, PRMG-75 Project Planning and Scheduling Professional (PSP Preparation Course) 45 PDU s مهندس جدوله و تخطيط معتمد 5000 1180 Sept 2 6, PRMG-90 PRMG-25 Certified Cost Professional (CCP) 60 PDU s هندسة و ادارة التكاليف/مهندس و استشارى تكاليف معتمد Introduction to Project Management International Standards 45 PDU s المعايير الدوليه الدارة المشروعات 5500 1180 Jan 6 17, 3600 980 March 10 14, Courses are designed to be held over one or two weeks for 45 or 60 hours of instruction, with lecture Classes

Aug 12-16, Aug 26-30, Sep 2-6, Sep 9-13, Sep 16 20, Sep 23-27, Sep 30 Oct 4, Oct 7 11, Oct 14-18, Oct 21-25, Intensive Courses INDE-079 Writing and Managing Winning Proposals for Engineers CONE-047 Design of steel structures in accordance with Egyptian specifications for structural steel buildings CEFA-008 Corrosion control by cathodic protection CONE-003 Non Destructive Testing of Concrete Structures and Foundations MEPR-008 Effective Contract Management Online MEPR-001 EVER-007 MPEN-013 PGAS-011 CONE-061 Project management information systems Energy Management System Vibration Based Predictive Maintenance, Machine Monitoring and Diagnostic Systems Principles of drilling engineering Roadway Locations, Geometrics and Drainage Principals MPEN-005 Centrifugal pumps operation and maintenance INDE-055 Distributed Control Systems (DCS) HSEN-005 Building Fire Safety and Emergency Evacuation TQLC-047 Welding in Maintenance Online INDE-020 Six-Sigma improvement program MPEN-010 Heat exchangers design PGAS-014 Formation Evaluation and log Analysis TQLC-006 Welding codes and welding qualifications Online PGAS-013 Drilling Services Fundamentals and Technologies MPEN-084 Rotating equipment mechanical seals TQLC-026 Fundamentals of welding technology: processes,inspection and quality control Online MPEN-085 Oil industry root cause failure analysis TQLC-043 Calculation of uncertainty in measurement MPEN-073 Basic principles of Hydraulic systems INDE-045 Reliability engineering PGAS-015 Oil and Gas instrumentation and control MEPR-003 Effective practical implementation of project management knowledge INDE-063 MHRE-004 INDE-002 CAEN-049 CONE-062 Planning for engineers Effective Leadership Meetings and Negotiations Skills 4 G Fundamentals, Current Operational Basics and the Evolution Path to 5G Pavement Design and Management CONE-029 Plumbing for engineers INDE-028 Productivity measurement, analysis and improvement INDE-054 Statistics for total quality management (statistical techniques for decision making and quality improvement) TQLC-048 Degration Mechanics Affecting Fixed Equipment in the Process Industries MPEN-042 Instrumentation and instruments loop control MEPR-010 Effective Project Managament Using Metrics, KPIs and Dashboards CONE-039 Business management for architects and engineers MPEN-006 Gas turbine operation and maintenance INDE-019 Technical report writing INDE-061 Programmable Logic Controller "PLC MEPR-011 Effective Projects Presentations for Customer Satisfaction INDE-052 Cost management for engineers MPEN-037 Basic Piping stress analysis by CAESAR II INDE-080 Quality Tools for Improvement Teams PGAS-010 Project management for the international oil and gas industry

Oct 28 Nov 1, Nov 4-8, Nov 11-15, Nov 25-29, Dec 2-6, Dec 9-13, Dec 16-20, Dec 30, -Jan 3, Jan 6-10, INDE-062 Negotiation skills for engineers MPEN-008 Valves: selection, installation and maintenance INDE-038 Project feasibility study CONE-051 Soil mechanics and foundations CONE-017 Bids and contracts for engineering projects MPEN-074 Advanced Course in Hydraulic Systems INDE-075 Basic skills of leadership CONE-006 Engineering projects planning and control MPEN-024 Fans, blowers and compressors: selection operation, maintenance and troubleshooting MPEN-041 Design and construction of piping systems INDE-056 MPEN-012 CAEN-050 MPEN-092 HSEN-002 Global Maintenance Management: (Level I) Traditional Maintenance Management Industrial pumps and fans: selection, operation and maintenance Inventor Level I Oil tanks design and maintenance Safety and health: risk assessment MPEN-021 Computer aided design of heating ventilating and air conditioning systems HVAC (Part I) TQLC-046 Applied Statistics and probability for Engineers & Scientists ENMM-012 Heat treatment in manufacturing of engineering components INDE-004 Time management for engineers INDE-057 Reliability Centered Maintenance Implementation INDE-082 Quantitative Analysis and management for business decisions TQLC-051 MPEN-075 INDE-005 Safety in Welding Industry Electro Hydraulic Control Systems Planning of maintenance operations MPEN-093 Piping and Instrumentation Diagrams TQLC-010 Non-destructive testing: fundamentals, techniques And applications Online CONE-053 Autodesk Revit Architecture MEPR-006 Lean six-sigma Improvement Methodology TQLC-045 Design of acceptance sampling inspection plans according to the international standard CONE-027 Tendering procedures and tendering strategies CONE-060 Inspection, Quality Control, Quality Assurance and Total Quality Management of Materials in Construction Projects CAEN-046 Essentials of MATLAB (Part I) MHRE-009 Engineering Team Building and Performance Optimization CONE-001 Cost control of engineering projects MPEN-076 Maintenance and Fault Analysis of Hydraulic Systems MHRE-013 Organizational Communication MPEN-087 Industrial projects installation-pipe lines welding INDE-013 Production management ENMM-043 Metallurgy for Non-Metallurgists CAEN-051 Inventor Level II HSEN-003 NASP safety and health for safety engineers INDE-053 Total project management: (Level I) TQLC-001 Quality control and mechanical testing of engineering materials MPEN-003 Reverse engineering in manufacturing spare parts MPEN-026 Computer aided design of heating ventilating and air conditioning systems HVAC Part II INDE-073 Logistics and supply chain engineering CAEN-047 Essentials of MATLAB (Part II)

Jan 13 17, Jan 20 24, Jan 27 31, Feb 3-7, Feb 10-14, Feb 17-21, Feb 24-28, March 3-7, March 10-14, CAEN-003 Computer applications in decision making CONE-046 Design and detailing of R.C. elements according to the Egyptian Code 2007 INDE-059 Global Maintenance Management: (Level II) Advanced Maintenance Management INDE-083 Practical project management International standard for industrial and energy projects ENMM-042 Fundamentals of Steels Metallurgy MEPR-004 Procurement of Contract Part I MPEN-090 Commissioning and Startup of New Project Mechanical Equipment INDE-051 Predictive maintenance planning INDE-047 Business management for engineers (Part I) MEPR-012 Value Management for Construction Projects MEPR-013 Lean For Service Industry CAEN-040 Computerized quality control CONE-065 Applications of Prices Variation INDE-007 Managerial and leadership development for engineers PGAS-004 Advanced drilling engineering MEPR-010 Effective Project Managament Using Metrics, KPIs and Dashboards INDE-004 CONE-020 MEPR-002 MPEN-016 CONE-063 MPEN-091 Time management for engineers Testing and quality control of concrete Production management information systems Engineering lubrication Flexible Pavement Materials Oil industry planning and scheduling maintenance MEPR-014 Managing Brownfield Projects MHRE-010 Performance Management CEFA-040 Failure of mechanical components and inspection methods Part I CAEN-038 Computerized maintenance management systems by using primavera MPEN-094 Welded Tanks for Oil Storage CONE-049 High-Strength concrete: manufacturing and application MPEN-078 Design and Manufacturing of Hydraulic Systems CONE-058 Evaluation of infrastructures, waterfront and marine structures INDE-023 Health-Safety-Environment (HSE) management for engineers MEPR-015 Foundations of the Finite Element Method for Engineers and Scientists CEFA-041 Failure analysis of welded steel structures Online TQLC-021 MPEN-088 INDE-066 HSEN-001 EVER-003 Inspection of pressure vessels according to API requirements Construction project tendering (Pre -project award) Strategic project management Principle of fire marshal for engineers Waste management & treatment CEFA-012 Corrosion in the petroleum and petrochemical industries MPEN-044 Compressors and pumps for petroleum industries CONE-001 Cost control of engineering projects TQLC-028 Advanced welding technology: codes, standards Online INDE-053 Total project management: (Level I) MPEN-037 Basic Piping stress analysis by CAESAR II INDE-038 Project feasibility study PGAS-012 Introduction to drilling, Offshore and Onshore operations MPEN-081 Pumps operation and maintenance INDE-065 Archieving excellence through quality HSEN-004 PHA-HAZARD and OPERABILITY (HAZOP)

March 17-21, March 24-28, March 31- April 4, April 7-11, April 14-18, May 5-9, May 12-16, May 19 23, May 26-30, INDE-063 INDE-048 MPEN-079 INDE-069 Planning for engineers Business management for engineers (Part II) Basic Principles of Pneumatic Systems Total project management (Level II) INDE-084 Data Analysis Techniques EVER-006 Exploration and production waste management EVER-004 INDE-078 INDE-068 MPEN-045 PGAS-010 Renewable and alternative energy Shutdown of maintenance planning by Using Primavera Marketing skills for engineers Material testing and quality control tools Project management for the international oil and gas industry TQLC-042 Industrial quality management: planning analysis and control CONE-050 Administration of construction projects MPEN-080 Electro Pneumatic Control Systems INDE-005 Planning of maintenance operations CEFA-005 Fundamentals of corrosion engineering MHRE-006 INDE-046 INDE-081 CONE-017 TQLC-049 Communication skills for Engineers & Scientists Risk assessment and management for engineers Sampling Techniques Bids and contracts for engineering projects Inspection of Welded & Welded Joints INDE-037 CONE-041 INDE-045 Introduction to decision analysis Repair and maintenance of steel structures Reliability engineering MPEN-036 Industrial measurements and instrumentation CAEN-049 4 G Fundamentals, Current Operational Basics and the Evolution Path to 5G MEPR-016 INDE-056 MEPR-005 CONE-064 INDE-069 Programming the finite Element Method for Engineers and Scientists Global Maintenance Management: (Level I) Traditional Maintenance Management Procurement of contract Part II Contract Management and Tendering Total project management (Level II) CONE-066 Cash Flow Management for Engineering Projects INDE-047 Business management for engineers (Part I) MEPR-009 Project Development Strategies HSEN-003 NASP safety and health for safety engineer PGAS-002 Drilling fluid engineering CEFA-043 INDE-059 INDE-052 MPEN-041 TQLC-050 Failure of mechanical components: analysis and prevention Part II Global Maintenance Management: (Level II) Advanced Maintenance Management Cost management for engineers Design and construction of piping systems Supervision & Monitoring of Welding Contractors CONE-006 INDE-048 INDE-008 INDE-025 EVER-005 Engineering projects planning and control Business management for engineers (Part II) Management science for engineers System control and data acquisition SCADA Water supply pipe networks

June 9 13, INDE-057 INDE-014 INDE-018 MHRE-007 INDE-085 Reliability Centered Maintenance Implementation Quality management Re-engineering of organizations and corporations Compensation and Benefits Laboratory Data Analysis High quality training and service to the industrial community In Egypt and Middle East AUC AUC School of Sciences and Engineering Falaki Academic Center, AUC Avenue, P.O. Box 74 113 Kasr El Aini St., P.O. Box 2511 Room 1017 One-Stop Shop, Ground Floor 11835, Egypt Cairo 11511, Egypt Fax 20.2.2797.4973 Fax 20.2.2792.3352 Follow ESS: Hotline: 02 2615 4333 www.aucegypt.edu/sse/ess ess@aucegypt.edu www.facebook.com/auc.ess