MATERIAL SAFETY DATA SHEET SUPER FLOW-ROCK. Date Issued: December 1, 1995 Date Revised: February 23, 2005 HMIS Rating

Similar documents
PATCHCRETE Acrylic Polymer #1003

SECTION I: PRODUCT IDENTIFICATION (770) SECTION II - HAZARD IDENTIFICATION

HEY'DI POWDER X Version 1. Print Date 07/13/2007 REVISION DATE: 09/12/2006

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

Page 1 of 5 Premium Interior Sound-Reduction Coating Issue date: 4/12

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet (MSDS) For TITRIX Powders

HOJA DE SEGURIDAD DE PRODUCTO

SAFETY DATA SHEET. Mineral Wool 1200 Insulation. Section I. Identification. Section II. Hazards Identification

Material Safety Data Sheet Weld Shield tm 1890 S-T & 3690 ST. Siltemp CH Silica. Section I Product Information

USHG Lime Putty Products SDS

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

M A T E R I A L S A F E T Y D A T A

Safety Data Sheet Hot Stix

: EUCLID NS GROUT - 50 LB BAG

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Oil-Dri Sweeping Compound (# )

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet HOCUT 797-HM

Material Safety Data Sheet

227 GROUT - 50 LB BAG Version 1.1 Print Date 06/18/09 REVISION DATE: 03/14/2007 1/

Santa Fe Smooth Finish

MATERIAL SAFETY DATA SHEET

H648 Page 1 Material Data Safety Sheet. Heartland Adhesives & Coatings Inc. Preparation Date:

MATERIAL SAFETY DATA SHEET

2602 FLORIDA PURPLE PEC

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A S H E E T

Copper(II) chloride dihydrate. Emergency telephone number Chemtrec (Within USA) (Outside USA)

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A

II. COMPOSITION/INFORMATION ON INGREDIENTS OSHA HAZARDOUS COMPONENTS (29 CFR ) Exposure limits 8 hrs. TWA (ppm)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

M A T E R I A L S A F E T Y D A T A

M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Bentonite - C.A.S. Number: / MSDS C.A.S. Code: 0100

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Titanium Dioxide % - 5% 10 mg/m3 15 mg/m3

M A T E R I A L S A F E T Y D A T A S H E E T

LEHDER Environmental Services Limited has attempted to obtain an updated MSDS. No update is available for the reason identified below:

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet For Portland Cement

Material Safety Data Sheet WF1010C Spin-on Coolant Filters / Conditioners

MATERIAL SAFETY DATA SHEET

Safety Data Sheet.

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A

MATERIAL DATA SAFETY SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

U.S. SAFETY DATA SHEET Howes Lubricator Diesel Treat Page 1 of 6

Norchem Silica Fume (Dry Powder-S)

M A T E R I A L S A F E T Y D A T A

Material Safety Data Sheet Spin-on Coolant Filters / Conditioners

Abrasive Supply Company, Inc.

Material Safety Datasheet BC8321 Curative Part B Urethane Elastomer System MSDS Version:

Material Safety Data Sheet

NFPA HMIS PPE Transport Symbol. Preparation Date 09-Jul-2007 Revision Date 09-Jul-2007 Revision Number 0 1. PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A S H E E T

SAFETY DATA SHEET Page 1 of 5

SAFETY DATA SHEET SDS

: NON-SLIP AGGREGATE - 50 LB BAG

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet RUST VETO 4295-PT

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A S H E E T

GAF Materials Corporation Material Safety Data Sheet MSDS # 1030 MSDS Date: November 2008

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET SECTION 1

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Material Safety Data Sheet WF1001C Coolant Additives

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

Progress Maintenance, Inc. Telephone Number: W. Fulton Street Chicago, IL 60612

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. PRODUCT NAME: Barite 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

M A T E R I A L S A F E T Y D A T A S H E E T SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET MSDS# Revised 03/20/2012

M A T E R I A L S A F E T Y D A T A S H E E T

VIPER INTERNATIONAL Ph (269) th Ave. Gobles, MI Material Safety Data Sheet VIPER S VENOM

Transcription:

MATERIAL SAFETY DATA SHEET SUPER FLOW-ROCK Date Issued: December 1, 1995 Date Revised: February 23, 2005 HMIS Rating Health 2 Flammability 0 Reactivity 0 Personal Protection C SECTION I Product and Company Identification Manufacturer: Telephone No. 214/381-8100 Lyons Manufacturing, Inc. Fax No. 214/381-8158 8900 Forney Rd. Website: www.lyonsmanufacturing.com Dallas, TX 75227-4505 Emergency Phone: 214/381-8100 Product Name: SUPER FLOW-ROCK CAS No: Not established Chemical Family: Cementitious Mortar SECTION II Composition/Information on Ingredients Ingredient Name: CAS Number Portland Cement 65997-15-1 Silica Sand 14808-60-7 SECTION III Hazards Identification Eye Hazards: Eye Irritant. Cement dust can cause inflammation of the cornea. Irrigate immediately with water. Consult a physician if necessary. Skin Hazards: May cause skin irritation. Avoid skin contact. Wet cement may dry the skin and cause alkali burns. Extremely sensitive people may develop an allergic dermatitis. Ingestion Hazards: Unlikely to occur; could cause irritation, nausea, diarrhea, ulceration of the digestive tract. Inhalation Hazards: May cause respiratory tract irritation. Cement dust can cause inflammation of nose passages. Prolonged exposure to respirable silica can cause silicosis, a scarring of the lungs. SUPER FLOW-ROCK 1

SECTION IV First Aid Measures Eye: Irrigate eyes thoroughly with water. Consult a physician Skin: Wash skin thoroughly with soap and water. Remove contaminated clothing. If necessary, consult a physician. Ingestion: Dilute immediately with water. Consult a physician. Inhalation: Remove to fresh air. If breathing has stopped, begin artificial respiration. Consult a physician. SECTION V Fire Fighting Measures Flash point: >212 Fire and explosion Hazard: None known Extinguishing Media: Water fog, dry chemical or CO 2 Fire Fighting Instructions: Firefighters should wear full protective gear and selfcontained breathing apparatus. SECTION VI Accidental Release Measures Scoop and sweep up. Place in containers for disposal in approved landfill. SECTION VII Handling and Storage Handling Precautions: Store in cool dry area. Use only in a well ventilated area. Keep out of reach of children. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Work/Hygienic Practices: Wash exposed areas thoroughly with soap and water after handling. Storage: Keep container closed when not in use. SECTION VIII Exposure Controls/Personal Protection Engineering Controls: Have good general and local exhaust ventilation in area. Eye/Face Protection: Use safety glasses with side shields. Skin Protection: Avoid skin contact. Wear long sleeved, body covering clothes and rubber or plastic gloves. Respiratory Protection: Use a properly fitted NIOSH-approved respirator Other/General Protection: Ingredients Exposure Limits: Cement Portland ACGIH TLV TWA 10 mg/m3 SUPER FLOW-ROCK 2

OSHA PEL TWA 15 mg/m3 (total dust) OSHA PEL-TWA 5 mg/m3 (respirable dust) Silica, Quartz ACGIH TLV-TWA 0.1 mg/me (Notice of Intended Change) ACGIH TLV-TWA 0.05 mg/m3 (Proposed) OSHA PEL-TWA 30/%SiO2+2 mg/m3 OSHA PEL-TWA 10/%SiO2+2 mg/m3 OSHA PEL-TWA 250/%SiO+5 mppcf SECTION IX Appearance: Odor: Chemical Type: Physical State: Solubility: Physical and Chemical Properties Gray or White Mortar No odor Mixture Solid Partially soluble SECTION X Stability and Reactivity Stability: Stable Hazardous Polymerization: Will not occur Conditions to Avoid (Stability:) None known Incompatible Materials: None known Hazardous Decomposition Products: None known; material is highly alkaline, avoid contact with acids. SECTION XI Toxicological Information Conditions Aggravated by Exposure: Eye disease, skin disorders, chronic respiratory conditions. Ingredient(s) Carcinogenicity: Silica - Listed on the National Toxicology Program Listed in the IARC Monographs Crystalline silica is classified as a known human carcinogen. SECTION XII Ecological Information No information available SECTION XIII Disposal Dispose in accordance with applicable federal, state and local regulations. SUPER FLOW-ROCK 3

SECTION XIV Transportation Information Not regulated by Federal or State DOT SECTION XV Regulatory Information U. S. Federal Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) All ingredients of this product are listed or are excluded from listing under the U. S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. SARA Hazard Classes Immediate Health Hazard Chronic Health Hazard SARA Section 313 Notification: Does not contain any ingredient regulated under Section 313 of the Emergency Planning and Community Right-to-know Act of l986 or 40CFR 372. State Regulations: California Proposition 65: The chemicals noted above and contained in this product are known to the State of California to cause cancer, birth defects, or other reproductive harm. Various other states workplace hazard and/or hazardous substance. SECTION XVI Other Information HMIS Rating: Health 2 Fire 0 Reactivity 0 PPE C Disclaimer The information in this Material Safety Data Sheet is accurate to the best of Lyons knowledge or is obtained from sources believed by Lyons to be accurate, but no warranty is expressed or implied regarding the accuracy of the data or the results to be obtained from its use. Since job and other conditions of use vary widely and are outside Lyons control, Lyons assumes no responsibility for any injuries which may occur in connection with any use of this product or information. SUPER FLOW-ROCK 4

While MSDS do not change often, if in doubt, please contact Lyons Manufacturing, Inc. at 214/381-8100 for the most recent version or visit our website at www.lyonsmanufacturing.com. SUPER FLOW-ROCK 5