Material Safety Data Sheet 72452C

Transcription

1 Revision Date: 08/20/2012 Issuing Date: 08/20/2012 Company/Undertaking Identification: Material Safety Data Sheet Polyclar Brewbrite 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING International Specialty Products 1361 Alps Rd. Wayne, N.J U.S.A. Telephone: (973) Distributed by: ISP (Canada) Corp Royal Windsor Drive Mississauga, Ontario L5J 4E7 Telephone: (905) Or : (800) Fax: Emergency Telephone: Prepared By: Product Code: Product Name: Product Use Description: CHEMTREC: or (Outside of the USA) (Spill Related Emergencies) PROSAR: (Health Related Emergencies) Product Stewardship Polyclar Brewbrite Beverage 2. HAZARDS IDENTIFICATION Emergency Overview CAUTION! MAY CAUSE RESPIRATORY TRACT IRRITATION. POWDERED MATERIAL MAY FORM EXPLOSIVE DUST-AIR MIXTURES. White Powder Hazard Summary Target Organs: Primary Routes of Entry: Acute Health Hazard: Chronic Health Hazard: Symptoms of Overexposure Eye Contact: Skin contact: Ingestion: Inhalation: Respiratory System Eyes. Skin. Ingestion. Inhalation. May cause respiratory tract irritation. None known May cause respiratory tract irritation. Page 1 of 5

2 3. COMPOSITION/INFORMATION ON INGREDIENTS Components: CAS-No Weight % 2-Pyrrolidinone, 1-ethenyl-, homopolymer Eye Contact: Skin Contact: Ingestion: Inhalation: Suitable Extinguishing Media: Combustion/Explosion Hazards: 4. FIRST AID MEASURES Flush with plenty of water. Wash off with soap and water. Do not induce vomiting. If conscious, give 2 glasses of water. Get immediate medical attention. If inhaled, remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. Get medical attention. 5. FIRE FIGHTING MEASURES Use extinguishing measures that are appropriate to local circumstances and the surrounding environment May form explosive dust-air mixture. Special Protective Equipment For Wear self-contained breathing apparatus and protective suit Fire-Fighters: Personal Precautions: Methods for Cleaning Up: Handling: 6. ACCIDENTAL RELEASE MEASURES Avoid creating dust Avoid breathing dust Use with adequate ventilation. Wear suitable protective equipment. Clean up promptly by scoop or vacuum. Avoid dust formation. Avoid dust accumulation in enclosed space. Keep in suitable, closed containers for disposal. Water washdown not recommended. 7. HANDLING AND STORAGE Avoid breathing dust. Avoid dust formation. Avoid dust accumulation in enclosed space. Wash thoroughly after handling. Storage: Hygroscopic. Keep container tightly closed. Keep in a dry, cool place. Keep away from direct sunlight. Engineering Measures: Respiratory Protection: Hand Protection: Eye Protection: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Use only in well-ventilated areas. Use only in well-ventilated areas. In case of insufficient ventilation wear suitable respiratory equipment Wear protective gloves. Safety glasses. Exposure Limits: Components: 2-Pyrrolidinone, 1-ethenyl-, homopolymer (74) ACGIH - Threshold Limit Values - Time Weighted Averages (TLV-TWA) No TLV/TWA Established U.S. - OSHA - Final PELs - Time Weighted Averages (TWAs) No TLV/TWA Established Page 2 of 5

3 Respirable dust Physical State: Color: Odor: Odor Threshold: ACGIH - Threshold Limit Values - Time Weighted Averages (TLV-TWA): 10mg/m³ (inhalable particles) 3mg/m³ (respirable particles) U.S.- OSHA- Final PELs- Time Weighted Averages (TWAs): 15mg/m³ (Total dust) 5mg/m³ (respirable dust fraction) 9. PHYSICAL AND CHEMICAL PROPERTIES Powder White Not available ph: 6-11 Specific Gravity: Boiling Point ( F): Melting/Freezing Point ( F): Vapor Pressure: Solubility: Flash Point ( F): Chemical Stability: Conditions to Avoid: Materials to Avoid: Hazardous decomposition products: Insoluble in water 10. STABILITY AND REACTIVITY Stable under normal conditions. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid moisture Avoid dust formation. Avoid dust accumulation in enclosed space. Strong oxidizing agents, Strong reducing agents nitrogen oxides (NOx) Page 3 of 5

4 Toxicity Test: Acute Oral Toxicity (LD50): Eye Irritation: Sensitization: Mutagenicity: Reproductive/Developmental Toxicity: Carcinogenicity: 11. TOXICOLOGICAL INFORMATION >5000 mg/kg (Rat) No eye irritation (rabbit) Patch test on human volunteers did not demonstrate sensitization properties In vitro tests did not show mutagenic effects In vivo tests did not show mutagenic effects Animal testing did not show any effects on fetal development. Animal testing did not show any effects on fertility. identified as a known or anticipated carcinogen by NTP. identified as probable, possible or confirmed human carcinogen by IARC. identified as a carcinogen or potential carcinogen by OSHA. Persistence and Degradability: Ecotoxicity: Waste Disposal Methods: 12. ECOLOGICAL INFORMATION Not readily biodegradable. LC50= >1000 mg/l 96hour (Juvenile Turbot) EC50=>1000 mg/l 72hour (Algae) (PVP) 13. DISPOSAL CONSIDERATIONS Dispose of in accordance with local regulations. Land Transport: DOT (Non-Bulk): DOT (Bulk): Air Transport (IATA): Sea Transport (IMO): TDG (Canada): 14. TRANSPORT INFORMATION Not regulated DOT Not regulated IATA Not regulated IMDG Not regulated TDG 15. REGULATORY INFORMATION TSCA DSL NDSL ENCS AICS EINECS ELINCS NZIoC KECI Inventories Status Not Not Not Not Not Page 4 of 5

5 PICCS IECSC California Proposition 65 Carcinogens & Reproductive Toxicity (CRT) List: EPCRA (SARA Title III): 15. REGULATORY INFORMATION This product does not contain any chemicals known to State of California to cause cancer, birth, or any other reproductive defects. Not applicable WHMIS Ingredient Disclosure List: None of the components of this product is listed on WHMIS Ingredient Disclosure list. WHMIS: This preparation is not classified as dangerous according to Canadian legislation 16. OTHER INFORMATION NFPA Rating: Health: 1 Flammability: 1 Reactivity: 0. HMIS RATING: HEALTH 1 FLAMMABILITY 1 PHYSICAL HAZARD 0 Prepared By: Product Stewardship MSDS sections updated: This data sheet contains changes from the previous version in section(s) 1 Legend: Disclaimer: N.Av.= Not Available; N.A.= Not Applicable For purposes of this MSDS, International Specialty Products, as responsible party, provides the information herein which is intended for use by persons who have or should obtain professional knowledge and experience in the subjects discussed. ISP s industrial products are used as materials in the production of products by industrial customers. ISP usually has only limited information about the products of its customers and their composition, methods of manufacture and use. Accordingly, ISP MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE ACCURACY, COMPLETENESS OR RELIABILITY OF INFORMATION HEREIN EXCEPT THAT SUCH INFORMATION IS, TO THE BEST OF ISP'S KNOWLEDGE AND BELIEF, ACCURATE AS OF THE DATE INDICATED. ISP recommends that customers independently test and evaluate its products and their products and processes in which ISP products are used in order to decide their safety and effectiveness. ***End of Safety Data Sheet*** Page 5 of 5