CORSICA CORNER DESK Assembly instructions. Produced in China for Next Retail Ltd V1. Actual product size H123.

Transcription

1 Actual product size H23.6 x W30 x D90cm IMPORTANT - RETAIN FOR FUTURE REFERENCE -204-V.

2 Assembly instruction BEFORE YOU START Warnings Number of people required to assemble Important: Retain these instructions for future reference Keep fittings out of children s reach and keep children well away from construction area. This product should only be used on firm level ground. Please periodically check all fittings and re-tighten as necessary Two persons are required to assemble this item Time to assemble 2 hour Please do not sit or stand on your furniture Avoid exposing the furniture to excessive heat or direct sunlight as this can cause deterioration of the colour Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to protect it from damage Tips Look out for the symbol througout this manual. Wherever you see it we will have a handy tip to help you with the assembly of your product. Do's We suggest you spend a short time reading through the leaflet before you start When you are ready to start. Make sure that you have the right tools. plenty of space and a clean, dry area for assembly Unwrap all packaging materials and place the components on a clean surface to protect it from damage, We recommend that the packaging is used to protect the surfaces during assembly. Tools required Missing parts If you are missing any fixtures and fittings for your product. Please contact our customer service team on and they will be happy to arrange for a replacement to be sent to you free of charge Carefully check that you have all the parts before beginning assembly Due to the size of the product we recommend that it is assembled in the room intended for use Ensure the product is fully assembled as illustrated and all fixings fully tightened before use. Wipe occasionally with a soft cloth slightly dampened with water. Then buff with a dry clean soft cloth Wood will mellow and change colour over time, we recommend that ornaments and items placed on the surface are moved regularly for the first few months to prevent uneven mellowing. Don'ts Do not drag or pull your furniture Do not use silicone based furniture polish. Silicone in furniture polishes can break down the finish Home service technicians If you have a fault with your product. Please contact our customer service team on If you have had the product for 28 days or less you may be offered a replacement,refund or for a fully trained home service technician to visit your home to assess the fault and repair the product where possible. If you have had the product for more than 28 days we will send an independant home service technician to review and repair the product where possible and recommend further action. You can write to us at Next Retail Ltd. Desford Roard, Leicester, LE9 4AT To view our full furniture range please visit Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or finishes to de-laminate. Do not place hot items (e.g. hot drinks) directly on to the wood surface. Please make sure you use a placement or coaster. Produced in China for NEXT retail Ltd V.

3 GETTING TO KNOW YOUR PRODUCT -204-V. 2

4 CUSTOMER HELPLINE CORSICA CORNER DESK If you have any problem with this product or require any replacement fittings please contact customer services Components supplied Ref Dimensions Visual Qty Ref Dimensions Visual Qty 28x 90cm 8 3x 43cm 2 86x30cm 9 3x 40cm 3 28x x 3cm x 45cm 2 45 x 7cm 5 26x 45cm x 7cm 6 24x 3cm x 48cm 7 26x 50cm 8 30x 44cm 2 9 4x 45cm x 46cm 28x 7cm 2 26x 47cm 3 26x 83cm 4 25 x 83cm 5 26x 3cm 6 4x 83cm 3 7 3x 43cm -204-V. 3

5 CUSTOMER HELPLINE If you have any problem with this product or require any replacement fittings please contact customer services Fixtures and fittings supplied (actual size) Ref Dimensions Qty A 8 x 30mm 34 B 2 x 5mm 49 C 7 x 35mm 49 D 4 x 4mm 6 F 6 x 50mm 6 I 5 x 6mm 6 Fixtures and fittings supplied Ref Dimensions Visual Qty E N/A 3 G 4mm H 3 x 4mm 8 J 53 x 85mm 4 K 3 x 2mm 2 L 80 x 25 x 8mm 2 M 3 x 2mm 2 N 25mm V. 4

6 CAM-PILLAR Tighten until shoulder is flush with panel.do not overtighten or undertighten (see example below) Shoulder NO GAP Panel Panel M x 3 x 2mm 7 x 35mm C x22 8 x 30mm A x v. 5

7 2 M x 3 x 2mm 7 x 35mm C x27 8 x 30mm A x4 3 WHEN FITTING CAMS ENSURE STARTING POSITION CORRECT BEFORE YOU INSERT CONNECTING CAM-PILLAR TURN CLOCKWISE UNTIL SECURE Align with long point of cross CORRECT WRONG Pillar head needs to be in centre B x4 2 x 5mm -204-V. 6

8 4 B x4 2 x 5mm 5 B x4 2 x 5mm -204-V. 7

9 6 B x4 2 x 5mm 7 Wide B x2 2 x 5mm -204-V. 8

10 8 x G 4mm x F 2 6 x 50mm 9 B x2 2 x 5mm -204-V. 9

11 Narrow CORSICA CORNER DESK 0 Wide B x9 2 x 5mm x G 4mm x F 2 6 x 50mm V.

12 2 B x2 2 x 5mm 3 B x4 2 x 5mm -204-V.

13 4 B x2 2 x 5mm -204-V. 2

14 5 B x6 2 x 5mm -204-V. 3

15 6 x G 4mm x F 2 6 x 50mm -204-V. 4

16 V.

17

18 9 x N 8 25mm 5 x 5mm I x V.

19 20 LATERAL VERTICAL FRONT- TO-BACK L x2 4 x 2mm D x6 4 x 4mm J x4 53 x 85mm -204-V. 8

20

21 750mm CORSICA CORNER DESK 300mm 900mm 236mm 309mm -204-V. 20