Quentor Ltd Fast-Track Banner Panel System

Size: px

Start display at page:

Download "Quentor Ltd Fast-Track Banner Panel System"

Silvester Goodwin
6 years ago
Views:

1 Quentor Ltd Fast-Track Banner Panel System Quentor Ltd Unit 10, Fitzmaurice Court Rackheath Industrial Estate Norwich NR13 6PY England Tel: +44 (0) Fax: +44 (0) CASES Clearly a case of excellence Clearly a case of excellence

$The Fast-Track system can be assembled in a fraction of the time that it takes to construct traditional frame systems.$ Each panel slots together, then locks in seconds with a 1/2 turn of a key to form a completely flush wall.

Each panel slots together, then locks in seconds with a 1/2 turn of a key to form a completely flush wall.

2 Introduction The Quentor Fast-Track panel system has been created to provide the perfect panel solution. The Fast-Track system can be assembled in a fraction of the time that it takes to construct traditional frame systems. Each panel slots together, then locks in seconds with a 1/2 turn of a key to form a completely flush wall. The panels are manufactured from lightweight aluminium honeycomb and aluminium extrusions for maximum strength and longevity of service. Fast-Track panels do not have the intrusive vertical struts of other systems allowing you to surround yourself with clean lines and continuous graphics. Fast-Track is a fully flexible and modular system that can be adapted to meet your exact requirements - even fully functioning rooms can be created. Shelving, workbenches, flat-screen monitors, lighting, cupboards, sliding doors and roof panels can be added to complete the perfect working environment. The Quentor Fast-Track Banner Panel System has proven to be very popular with our clients, we are proud to have provided it to teams in a number of formulas including Formula 1, Le Mans series, Renault World Series, GP2, GP3, V8 Supercars and FIA GT series. A very important finishing touch to the Fast-Track System is the Banner Case. Quentor will of course manufacture the perfect Banner Transportation Case for you to safely store and transport your Fast-Track banner system. The transportation cases can be made future proof with additional slots available to allow for extra panels. We can apply an identification label to the base of each panel to simplify and quicken the build process - a place for everything and everything in its place. Quentor will provide the full design service for your new Pit Garage, ranging from the design & quotation with CAD views which can be altered to suit your individual needs Dimensions of Garage Please provide us with the dimensions of your garage which will allow us to draw your chosen layout. We will assist and advise to create the best possible garage for you. Alternatively, we can arrange a visit to come and see you. 2. Drawings & Quotation All quotations are sent out with Computer Aided Design (CAD) Images enabling you to visualise your garage. We have a dedicated team of design engineers to answer any questions you may have. We can alter the CAD images until we meet your precise specification. 3. Process into production After your approval the design will then be manufactured to your chosen design. 4. Futureproof If you ever need to alter or make additions to your garage we always keep the design on CAD. Custom Design Le Mans 24 hours Team NOTES: Dimensions, weights and other specifications of the products listed are correct at the time of publication but are subject to change without notice. All weights are approximate and are dependant upon the final specification. Further information is available upon request. All images and details contained within this document are the intellectual property of Quentor Ltd and should not be reproduced without written consent. For a more comprehensive guide to our products and services please contact us directly or visit our website

Example Systems Case Study Example Systems Case

quick to assemble, our Fast-Track Banner Panel

lightweight banner cases, for protection and ease of

Making use of our 3m high Fast Track Banner Panel

oldest active sports car race in endurance racing.

3 Example Systems Case Study Example Systems Case Study Le Mans 24 hours Team Designed to be easy and quick to assemble, our Fast-Track Banner Panel System provided 5 garages and took 4 men just 1 day to build. All five garages can be dismantled and stored into lightweight banner cases, for protection and ease of transportation. Making use of our 3m high Fast Track Banner Panel System at the 24 Hours of Le Mans, the world s oldest active sports car race in endurance racing. The system is versatile in the fact that it can be used as both a 3m high system as shown here for Le Mans or a 2.1m system for other races worldwide.

Lower Deck Recessed Shelves A new feature in our Fast-Track banner panel

These can create an attractive & practical feature for the back of the

Track Shack Q7 Winged Boat Case Window/ doorway A window is a great way

4 System Features Case Study Illuminated Logo Quentor can create an illuminated logo & text within the panel, which will enhance your garage. Lower Deck Recessed Shelves A new feature in our Fast-Track banner panel system are illuminated recessed shelves. These can create an attractive & practical feature for the back of the garage for helmets and steering wheels. Track Shack Q7 Winged Boat Case Window/ doorway A window is a great way to provide a clear view of the garage for the VIP s or race engineers & technicians. Doorways can be added to provide easy access throughout the garages.

System Features Case Study Grandstand Seating Your VIP s can get close to the action in

mirrored window which allows one-way viewing.

action. We can offer a variety of transportable seating solutions for your VIP s.

The concept was to create a compelling sensory adventure for VIP s to enjoy.

heighten the sense of anticipation, the VIP then enters a dimly lit network of corridors

with comfortable leather seating, ceiling mounted TV monitors and a large one-way window

If you value your VIP s, speak to Quentor.

5 System Features Case Study Grandstand Seating Your VIP s can get close to the action in secure comfortable surroundings whilst enjoying complete anonymity through the use of a mirrored window which allows one-way viewing. The TV monitors mounted in the ceiling allow them to keep up with all the trackside action. We can offer a variety of transportable seating solutions for your VIP s. Features can include ipad storage and cupboards to name a few. Illuminated Logo Enhance your garage with an attractive feature such as an illuminated logo. This will impress! The concept was to create a compelling sensory adventure for VIP s to enjoy. Starting with an impressive, imposing entrance way with Stop/Go lights designed to heighten the sense of anticipation, the VIP then enters a dimly lit network of corridors that further tantalises their curiosity before finally arriving in the VIP lounge area with comfortable leather seating, ceiling mounted TV monitors and a large one-way window that allows them a full panoramic view of the garage. If you value your VIP s, speak to Quentor. Engineer s Station Built into the Quentor Fast-Track panel system the Engineers Station provides the perfect working space. Monitors can be mounted in the banner panel above the worktop, together with storage space below. Illuminated Corridor A fully enclosed corridor was created from our Fast-Track panels including Kick-Strips and a ceiling to fully block-out natural daylight. The corridor was then lit using special LED tape technology and lit logo panels to enhance the VIP s sensorial experience.

6 Example Systems Example Systems Formula One Team Formula E Team V8 Supercars Australia Formula One Team

7 Example Systems Example Systems GP2 Team GP2 & GP3 Teams GP2 Team

8 Example Systems Example Systems Le Mans 24 hours Team Blancpain GT3 Team P1 Motorsport Team World Rally Championship Team Moto2 Team

environment. The seamless surface provides an opportunity to run spectacular graphics throughout the garage.

5mm Wide x 12.7mm Deep and weigh around 12.4kg.

our modern manufacturing plant in Norfolk. Best of all it is far less expensive than some rival systems.

9 build as easy as Easy, quick assembly The Fast-Track System has been carefully designed to be extremely quick to assemble and disassemble. The panels slot easily together using the male/female extruded edges and are locked into position with our unique key operated cam locking system. We offer a wide range of panels, corners and other accessories that enable you to create the perfect working environment. The seamless surface provides an opportunity to run spectacular graphics throughout the garage. Standard panels are manufactured from Aluminium Honeycomb and Aluminium extrusions. They are 2100mm High x 972.5mm Wide x 12.7mm Deep and weigh around 12.4kg. By far the best quality system on the market, Fast-Track is engineered using the latest CAD/ CAM technologies at our modern manufacturing plant in Norfolk. Best of all it is far less expensive than some rival systems. Additional Features & Optional Extras Bring two panels together Tighten the lock 1/2 turn with the key to tighten the Cam Lock Doors Roof Panels Lighting Shelving Support Panels VIP areas Worktops 1/2 height Panels Engineers stations Cupboards Bin Flaps Office Areas Monitor panels Helmet Cupboards Illuminated Logos Adjust the feet to level Push fit height adjustable foot with replaceable interference washer. Easy finger turn to adjust height. 3.

Extrusions & End Profiles Extrusions & End Profiles In order to create your Quentor Fast-Track Banner Panel System, we offer a variety of extrusions and end profiles as shown on these pages.

10 Extrusions & End Profiles Extrusions & End Profiles In order to create your Quentor Fast-Track Banner Panel System, we offer a variety of extrusions and end profiles as shown on these pages. Quentor can also custom design new extrusions dependent on your requirements. End Cap-Male We have also designed extrusions which allow an Octanorm system to be joined to our Quentor Fast-Track Banner Panel system. This allows full flexibility of the system. End Cap-Female T-Post 90 degree Radius Corner Octanorm T-Post 90 degree Corner Octanorm Joiner -Female 45 degree Radius Corner Octanorm Joiner -Male Surface T-Section

Engineers Station Illuminated Helmet Shelves Garage Tool Cabinet Mini Fast-Track Banner system Fast-Track Premium Banner System NEW!

carefully designed to be an alternative option to the Fast-Track Premium System.

11 New for 2015! Fast-Track Q Fast-Track Q Banner System Quentor Exhibition Layout Helmet Shelves Engineers Workstation Pit Lane Stand Banner Case Engineers Station Illuminated Helmet Shelves Garage Tool Cabinet Mini Fast-Track Banner system Fast-Track Premium Banner System NEW! Fast-Track Q Banner System your company illuminated logo here New for 2015! Fast-Track Q Banner System Quentors New Fast-Track Q System has been carefully designed to be an alternative option to the Fast-Track Premium System. The panels slot easily together using the male/female extruded edges and are locked into position with our unique key operated cam locking system. The new panels still offer all the advantages of a lightweight, glossy, seamless system but at a lower cost than the Fast-Track Premium System. Standard panels are manufactured from a specially designed composite material ready finished in white as standard. Additional Features & Optional Extras Shelving Support Panels Lighting Worktops 1/2 height panels VIP areas Cupboards Bin flaps Office areas Roof Panels Helmet Cupboards

12 Example Systems Example Systems Broadcast suite Clean Rooms & Mobile Workshops Packs away neatly for transportation

13 Example Systems Panel Identification Quentor Exhibition Stand BTCC Press Room The Banner Case allows you to safely store and transport your banner system. Panels are numbered for easy identification and quick storage.

14 System Features & Accessories System Features & Accessories Beam (Arched) Beams (Straight) Beam Fittings Corridor (Illuminated) Doorway Beam (Shaped) Door (Sliding) Engineer s Workstation Column Feature Ceiling Mounted TV Monitors Graphics (Illuminated) Door (Opening) Corner Brace Corridor Door (Opening with step) Engineer s Workstation

15 System Features & Accessories System Features & Accessories Engineer s Alcove & TV monitors Foam Routs Graphics (Illuminated) Helmet Shelf Headset Feature Panel (3m high)

16 System Features & Accessories System Features & Accessories We are always ready to develop your next new feature, simply contact us and we will make your ideas come to life. Roof Panel VIP Area VIP Area Panels (Printed) Window (Clear Finish) Stop/Go Lights Recessed Shelves (Illuminated) VIP Roof & Window Superior Bespoke Flight Cases TV Monitor TV Monitor Stack Window (Mirror Finish) Window (Contra Vision One way)

Quentor Ltd. Q-Shacks CASES. Clearly a case of excellence

Quentor Ltd. Q-Shacks CASES. Clearly a case of excellence Quentor Ltd Q-Shacks CASES Clearly a case of excellence Introduction Q-Shacks were developed by Quentor as lightweight freight solutions for world-wide air travel. The Q-Shack is a lightweight module that