Insulated roof and wall systems. Daylight solutions. Efficient and high-performance Kingspan Day-Lite systems

Size: px

Start display at page:

Download "Insulated roof and wall systems. Daylight solutions. Efficient and high-performance Kingspan Day-Lite systems"

Neil Gilbert
5 years ago
Views:

1 Insulated roof and wall systems Daylight solutions Efficient and high-performance Kingspan Day-Lite systems

2 Table of contents Insulated roof systems Kingspan built-in light dome element Kingspan Rooflight Insulated wall systems for transmission of daylight Kingspan Wall-Lite Kingspan Day-Lite window element 2

Healthy light at the workplace The wellness factor daylight: Let the sun in. It motivates, inspires the senses and is a natural means of perceiving the passage of time for our eyes: Daylight.

3 Healthy light at the workplace The wellness factor daylight: Let the sun in. It motivates, inspires the senses and is a natural means of perceiving the passage of time for our eyes: Daylight. However the natural brightness not only ensures a good mood, above all it also boosts capacity. Ultimately, on average a person spends approximately 80,000 hours of his life at the workplace. And precisely for this reason, the beautiful radiance from outside should also be permitted to penetrate into the interior of a building and here unfold its positive effect. Through use of clever daylight systems that through their special characteristics let in natural light, in addition to improved lighting effects, there are many other positive repercussions on the human being and the work performed. Daylight... 3 supports vision and reduces fatigue 3 promotes concentration and learning capacity 3 increases wellness and releases 'good-mood hormones' 3 increases safety at the workplace and reduces the error rate 3 helps prevent accidents Moreover, daylight in workplaces and production facilities is also worthwhile from the economic perspective. Installation of appropriate roof systems and elements reduces energy costs, since to some extent artificial light sources are dispensed with. Furthermore, fewer mechanical ventilation and heating systems are required and thus costs are sustainably reduced. Let the sun in for better performance, a wellness climate and greater efficiency. With daylight systems from Kingspan. 3 Comfort and increased production 3 Visual well-being 3 Health, vitality and performance 3 Improve the amenity values and significantly reduce overall energy requirements at the same time 3 Good lighting reduces symptoms of fatigue and lessens the probability of error 3 has positive health effects and reduces illness-related absence 3

Investor / planner Kingspan Rooflight 3 Long service life 3 Lower energy consumption through U-values to 1.

High daylight yield even after 15 years *(= lower energy consumption) LT up to 65% 3 Minimal acquisition costs 3 Fast and easy

*Less than 3% reduction of the LT value after 15 years Kingspan Rooflights enables a high daylight yield.

4 Investor / planner Kingspan Rooflight 3 Long service life 3 Lower energy consumption through U-values to 1.09 W/m 2 K 3 A visual highlight through flush-mount installation 3 Fast use of the building due to reduced construction times 3 High daylight yield even after 15 years *(= lower energy consumption) LT up to 65% 3 Minimal acquisition costs 3 Fast and easy planning 3 Function is guaranteed by the manufacturer 3 Interior work can proceed immediately after installation. *Less than 3% reduction of the LT value after 15 years Kingspan Rooflights enables a high daylight yield. These available light-permeable polycarbonate systems offer superior UV resistance; which in turn enables outstanding long-term light-permeability and first-class thermal and structural characteristic values. 4

Installer / processor Clear installation advantages 3 Faster and easier installation 3 Low costs 3 One manufacturer; one point of contact 3 Total guarantee 3 Roof is immediately leak-proof

5 Installer / processor Clear installation advantages 3 Faster and easier installation 3 Low costs 3 One manufacturer; one point of contact 3 Total guarantee 3 Roof is immediately leak-proof Dimensions, weight and performance Product reference Thickness (mm) Weight (kg/m 2 ) Length (incl. cut back 175 mm) (m) U-value (W/m 2 K) LT value (%)* g value Fire behaviour in acc. w. EN KS1000 PC B-s2, d0 KS1000 PC 40 Double Skin B-s2, d0 Notes: Based on 80 mm panel thickness with spacers at 1 m centre-points. The U-values have been calculated using the method prescribed by national building guidelines. *For a transparent polycarbonate surface. Light transmission in accordance with BS EN 410 is measured samples 600 mm x 600 mm in size. The Solar Heat Gain Coefficient (SHGC) in accordance with BS EN 410 is the total solar energy that reaches the interior of a building. In addition to the standard assortment of the Kingspan Day-Lite colours, white is also available for a higher SHGC capacity. For additional information, please contract the Kingspan Technical Department. Applications The Kingspan Rooflight is suitable for all building applications with a roof pitch of 7º or more after deformation, unless the humidity considerably increases through building occupants or processes, or for interior environments with low temperatures. Kingspan Rooflights can also be used for wall applications, as needed. For additional project-specific information, please contract the Kingspan Technical Service Department. Profile geometry KS1000 PC 20 Rooflight mm 333 mm 333 mm 333 mm 35 mm Bonded metal strip plant-side KS1000 PC 40 Double Skin Rooflight mm 333 mm 333 mm 333 mm d D D = d + 35 mm d D D = d + 35 mm Note: Condensation can occur in the panel, this does not constitute a defect. 5

Investor / planner Kingspan built-in light dome element 6 3 Immediately rain-tight (interior work can be directly performed) 3

site as a complete installation unit 3 Ventilatable and available as NRWG in accordance with DIN EN 12101-2 3 Fulfills rigid

Leak-tightness thanks to a high degree of prefabrication 3 Elegant ceiling view through uniform profiling of the inner shell 3 A

6 Investor / planner Kingspan built-in light dome element 6 3 Immediately rain-tight (interior work can be directly performed) 3 Weather-independent 3 System guarantee 3 Function retention even after many years 3 Easy planning 3 Ready for the construction site as a complete installation unit 3 Ventilatable and available as NRWG in accordance with DIN EN Fulfills rigid roofing requirements as stipulated in DIN EN Optimal fit thanks to factory-integration in the Kingspan roof panels 3 Leak-tightness thanks to a high degree of prefabrication 3 Elegant ceiling view through uniform profiling of the inner shell 3 A complex apron plate is not required 3 Large bandwidth of RAL colour tones** * At least +5º C ** Colour deviations from the roof elements are possible

Installer / processor Clear installation advantages 3 Direct installation with the roof panels 3 Short installation times 3 Immediately leak-tight 3 Light dome pre-assembled in the factory 3

concept Thermal-bridge free sash head thanks to PVC curb Max. length including cut-back 4,000 mm Min. roof pitch 6 / max. 25 version with transverse joint Glazing variants: clear or opal U-values 3.

7 Installer / processor Clear installation advantages 3 Direct installation with the roof panels 3 Short installation times 3 Immediately leak-tight 3 Light dome pre-assembled in the factory 3 Everything from a single source Light dome elements Aeration and ventilation For optimal light yield in your building Light dome elements RWA Daylight in a manner appropriate for your fire protection concept Thermal-bridge free sash head thanks to PVC curb Max. length including cut-back 4,000 mm Min. roof pitch 6 / max. 25 version with transverse joint Glazing variants: clear or opal U-values Opening variants: rigid, manual, electric Thermal-bridge free sash head thanks to PVC curb Max. length including cut-back 4,000 mm Min. roof pitch 6 / max. 25 version with transverse joint Reinforcements on all condensation-relevant points Version in diagonal geometry Delivery includes opening mechanism pneumatic and electric in accordance with DIN EN (connection through Essmann or other approved specialised companies) Sizes / OKD 700 x 1,370 mm 1,200 x 1,200 mm 1,000 x 1,000 mm 1,500 x 1,500 mm 1,000 x 1,500 mm 1,200 x 2,400 mm 1,000 x 2,000 mm Sizes / OKD 1,000 x 1,000 mm 1,000 x 1,500 mm 1,200 x 1,200 mm 1,000 x 2,000 mm 1,500 x 1,500 mm 1,200 x 2,400 mm * other sizes are available on request Longitudinal section and cross section through roof element and light dome Note: The installation of support flashing in the area of the Rooflight Domes is mandatory. 7

Investor / planner Kingspan Wall-Lite 3 Integrated system solution joint compatible with all AWP facade elements 3 Enables a flush-mount facade appearance without

profiles 3 Easy planning 3 Low energy consumption Kingspan Wall-Lite is a light-permeable polycarbonate wall light panel with concealed mounting that permits light to

8 Investor / planner Kingspan Wall-Lite 3 Integrated system solution joint compatible with all AWP facade elements 3 Enables a flush-mount facade appearance without structure frames 3 Structural, thermal and UV-resistance for up to 25 years 3 Many colour options are available 3 Flush-mount glazing 3 No additional connection profiles 3 Easy planning 3 Low energy consumption Kingspan Wall-Lite is a light-permeable polycarbonate wall light panel with concealed mounting that permits light to enter the building, with high thermal efficiency and an aesthetic exterior. It offers designers adequate freedom for designing really special and energy-efficient buildings. 8

Installer / processor Clear installation advantages 3 Direct installation without cut-out 3 Minimal time expenditure for installation 3 Easy installation Dimensions, weight and performance Product

9 Installer / processor Clear installation advantages 3 Direct installation without cut-out 3 Minimal time expenditure for installation 3 Easy installation Dimensions, weight and performance Product reference Thickness (mm) Weight (kg/m 2 ) Standard lengths (m)* U-value (W/m 2 K) Light transmission (%) Solar heat gain coefficient KS1000 DL Transparent KS1000 DL Opal White KS1000 DL Blue KS1000 DL Green KS1000 DL Violet KS1000 DL Red KS1000 DL Orange KS1000 DL Yellow KS1000 DL IR Green KS1000 DL IR Blue Notes: The U-value was calculated using the method prescribed by national building guidelines. Light transmission in accordance with BS EN 410 is measured with samples 600 mm x 600 mm in size. The Solar Heat Gain Coefficient (SHGC) in accordance with BS EN 410 is the total solar energy that reaches the interior of a building. Minimum purchase quantities for colour solutions. Please contact our sales employees in this regard. For additional information, please contract the Kingspan Technical Department. * Longer lengths are available on request. Applications Kingspan Wall-Lite is a wall light panel with concealed mounting for vertical and horizontal applications. The system is completely compatible with all AWP wall panels. Can be used for most industrial buildings. Note: Condensation can occur in the panel, this does not constitute a defect. 9

3 Retroactive installation is possible at any time. 3 Visually appealing. Thanks to the especially developed construction principle, visually disturbing screws or rivets are completely dispensed with.

10 Investor / planner Kingspan Day-Lite window element 3 Significant cost savings. With the Kingspan window element a sheet metal surround on sandwich elements is unnecessary, and retroactive surrounds of the windows inside and outside are also unnecessary. 3 Retroactive installation is possible at any time. 3 Visually appealing. Thanks to the especially developed construction principle, visually disturbing screws or rivets are completely dispensed with. A design advantage, particularly for sandwich panels with concealed fastening. 3 Clean closures without sealing compounds. 3 Individual colouring. The Kingspan window element offers a variety of design possibilities; the exterior aluminium frame is available in the RAL and NCS colour spectrum. 3 Outstanding insulation values. Our window surrounds achieve an optimal seal because fasteners do not penetrate the window frame. This design results in a longer service life of the entire window frame construction also in the corner areas. 3 Also in corner areas. In practice, windows for lightweight construction are often considered to be touchy problem zones. In particular, each of the thermal advantages of sandwich construction are significantly impaired through conventional installation technologies and often must be compensated with expensive structural measures. The Kingspan Day-Lite offers essential advantages. The system was developed specifically for the requirements of lightweight projects and meets all the required technical, economic, as well as aesthetic prerequisites that the customer expects from this construction method. 10

Installer / processor Clear installation advantages Versions and application areas - Available for sandwich element thicknesses 80 200 mm - Retroactive

provided with textile or slat shading (in accordance with the workplace ordinance) 3 Optimal thermal protection and improved seal 3 Frame construction that

3 Clamp connection without visible screw fitting 3 Insulated base frame (separate outer and inner shell) is mounted on the panel static and stable via a

11 Installer / processor Clear installation advantages Versions and application areas - Available for sandwich element thicknesses mm - Retroactive installation is also possible - In the versions side-hung pane / bottom-hung pane and slanted window, as well as fixed glazing - Window elements can be provided with textile or slat shading (in accordance with the workplace ordinance) 3 Optimal thermal protection and improved seal 3 Frame construction that is free of thermal bridges. 3 Integrated drainage system dissipates condensation in a controlled manner. 3 Shortened insulation time and material savings. 3 Clamp connection without visible screw fitting 3 Insulated base frame (separate outer and inner shell) is mounted on the panel static and stable via a clamp profile. 3 A sheet metal surround is not necessary. 3 Depending on the structural steelwork requirements, an additional sub-construction can be dispensed with. 11

12 Germany Kingspan GmbH Am Schornacker Wesel T: F: E: info@kingspan.de Poland Kingspan Sp. z o.o. ul. Przemysłowa , Lipsko T: F: E: info@kingspan.pl Czech Republic Kingspan a.s. Vážní Hradec Králové T: F: E: info@kingspan.cz Hungary Kingspan Kereskedelmi Kft. Horkadűlő Újhartyán T: F: E: ajanlat@kingspan.hu For the product offering in other areas please contact your local sales representative or visit 10/2017

HOESCH ROOFLIGHT DOME SYSTEM. TECHNICAL DATA SHEET HOESCH Isodach RD and Thermorock Dach SIMPLE. EFFICIENT. HIGH LEVEL OF PREFABRICATION

HOESCH ROOFLIGHT DOME SYSTEM. TECHNICAL DATA SHEET HOESCH Isodach RD and Thermorock Dach SIMPLE. EFFICIENT. HIGH LEVEL OF PREFABRICATION HOESCH ROOFLIGHT DOME SYSTEM TECHNICAL DATA SHEET HOESCH Isodach RD and Thermorock Dach SIMPLE. EFFICIENT. HIGH LEVEL OF PREFABRICATION HOESCH Isodach RD and Thermorock Dach Roofl ight Dome System HOESCH