Health: 1 Fire: 1 Reactivity: 0 PPI: B

Transcription

1 Page Number: 1 of 6 SECTION I PRODUCT AND COMPANY INFORMATION Product Name: OLEO CAPSICUM 3MM CAS Number Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 PPI: B Company Identification: Contact: Telephone/Fax: Emergency Phone (24 Hour): Chemtrec (24 Hour): Preparer Kerry Ingredients & Flavours 160 TERMINAL AVENUE CLARK NJ REGULATORY AFFAIRS DEPT. (732) (732) EVENING ADMINISTRATOR (732) (800) REGULATORY DEPARTMENT Product Class OLEORESIN Trade Name OLEO CAPSICUM 3MM Product Code SECTION II INGREDIENT AND HAZARD INFORMATION Ingredient Name CAS Number Percent TSCA CAPSICUM OLEORESIN 20% BY HPLC *** ALL Ingredients in this product are listed in the T.S.C.A. Inventory SECTION III HAZARDS IDENTIFICATION PERMISSIBLE EXPOSURE LEVEL: EFFECTS OF OVEREXPOSURE: MAY BE A SKIN/EYE IRRITANT IN ANY FORM. HAS THIS PRODUCT BEEN LISTED AS A CARCINOGEN OR POTENTIAL CARCINOGEN IN THE ANNUAL REPORT ON CARCINOGENS PUBLISHED BY NTP, OSHA, OR IARC? YES NO X

2 Page Number: 2 of 6 SECTION IV FIRST AID MEASURES INHALATION EXPOSURE: REMOVE TO FRESH AIR. SEEK MEDICAL ATTENTION EYE CONTACT: FLUSH WITH COPIOUS AMOUNTS OF WATER FOR 15 MINUTES SKIN CONTACT: REMOVE CONTAMINATED CLOTHING. WASH AFFECTED AREAS SWALLOWING:DRINK WATER OR MILK TO DILUTE. SEEK MEDICAL ATTENTION SECTION V FIRE FIGHTING MEASURES Flammability Class IIIB Flash Range: 210.øF (98.89øC) Tag Closed Cup FLAMMABLE PROPERTIES NONE KNOWN N/AV=NOT AVAILABLE EXTINGUISHING MEDIA CARBON DIOXIDE DRY CHEMICAL FOAM USE WATER FOR COOLING MATERIAL STORED IN VICINITY OF FIRE. FIRE FIGHTING INSTRUCTIONS USE SELF CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING. SECTION VI ACCIDENTAL RELEASE MEASURES CONTAINMENT AND CLEANUP: ELIMINATE SOURCES OF IGNITION. WIPE SMALL SPILLS WITH CLOTH. ABSORB LARGER SPILLS WITH SAND, SAWDUST,OR SIMILAR POROUS MATERIALS. WASTE DISPOSAL METHOD: FOLLOW FEDERAL, STATE, AND LOCAL GUIDELINES FOR PROPER WASTE DISPOSAL. SECTION VII HANDLING AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: PERSONAL PROTECTIVE EQUIPMENT SHOULD BE SELECTED SPECIFICALLY FOR THE WORKPLACE, DEPENDING ON CONCENTRATION AND QUANTITY OF THE HAZARDOUS SUBSTANCE HANDLED. OTHER PRECAUTIONS: KEEP CONTAINERS TIGHTLY CLOSED IN A COOL, DRY AND WELL VENTILATED PLACE AWAY FROM HEAT, LIGHT AND SOURCES OF IGNITION.

3 Page Number: 3 of 6 SECTION VIII EXPOSURE CONTROLS/PERSONAL PROTECTION To the extent deemed appropriate, implement pre placement and regularly scheduled evaluation of employees for exposure symptoms and spirometry testing of lung function for workers who are regularly exposed to this material. To the extent deemed appropriate, use an experienced air sampling expert to identify and measure volatile chemicals that could be present in the workplace air to determine potential exposures and to ensure the continuing effectiveness of engineering controls and operational practices to minimize exposure. In December 2003, the National Institute for Occupational Safety and Health ("NIOSH") published an Alert on preventing lung disease in workers who use or make flavorings. [NIOSH Publication Number ] In August 2004, the United States Flavor and Extract Manufacturers Association (FEMA) issued a report entitled "Respiratory Safety in the Flavor Manufacturing Workplace". Both of these reports provide recommendations for reducing employee exposure and for medical surveillance in the workplace. The recommendations in these reports are generally applicable to the use of any chemical in the workplace and you are strongly urged to review both of these reports. The report published by FEMA also contains a list of "high priority" chemicals. If diacetyl is present in this product, at a concentration greater than or equal to 0.10%, due to the intentional addition by Kerry, diacetyl will be identified in this safety data sheet. If any of the other chemicals are present in this product at a concentration greater than or equal to 1.0%, due to the intentional addition by Kerry, the chemical(s) will be identified in this safety data sheet.

4 Page Number: 4 of 6 Occupational Exposure Limits ACGIH TLV ACGIH TLV C ACGIH STEL OSHA STEL OSHA PEL CAPSICUM OLEORESIN 20% BY HPLC N/est N/est N/est N/est N/est RESPIRATOR PROTECTION: FOR LIQUIDS, REQUIRED WHEN VAPORS/AEROSOLS ARE GENERATED OR ARE PRESENT IN THE WORKPLACE. FOR POWDERS, REQUIRED WHEN DUST IS PRESENT IN THE WORKPLACE. VENTILATION: PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL EXHAUST) VENTILATION TO MINIMIZE EXPOSURE. PROTECTIVE GLOVES: WEAR CHEMICALLY RESISTANT GLOVES. EYE PROTECTION: USE FACE SHIELD OR SAFETY GLASSES. OTHER PROTECTIVE EQUIPMENT: SECTION IX PHYSICAL AND CHEMICAL PROPERTIES Form: CLEAR VISCOUS LIQUID Appearance/Color: DARK RED Odor: NO OFF NOTES Solubility (in water): OIL SOLUBLE ph Value: Not Applicable Boiling Range: Not Applicable Vapor Pressure (mmhg): Not Available Evaporation Rate: Unavailable Vapor Density: Heavier than air % Volatile Weight Not Available % Volatile Not Available Specific Gravity: 1.00

5 Page Number: 5 of 6 VOC N/AV Heavy Elements (ppm) 0. SECTION X STABILITY AND REACTIVITY Stability: This product is stable Hazardous Polymerization: Hazardous polymerization will not occur INCOMPATABILITY: AVOID STRONG OXIDIZING AGENTS. CONDITIONS TO AVOID: ELEVATED TEMPERATURES ABOVE 60 DEGREES C. HAZARDOUS DECOMPOSITION PRODUCTS: BURNING PRODUCES CARBON MONOXIDE AND CARBON DIOXIDE. SECTION XI TOXICOLOGICAL INFORMATION Information is listed in SECTION III under EFFECTS OF OVEREXPOSURE. No other information is available. Route Species Exposure and Dose SECTION XII ECOLOGICAL INFORMATION No Information is available. SECTION XIII DISPOSAL CONSIDERATIONS Dispose of spilled material in accordance with state and local regulations for waste which is non hazardous by federal definition. this information applies to the material as manufactured. Processing, use, or contamination may make this information inappropriate, inaccurate, or incomplete. SECTION XIV TRANSPORT INFORMATION UN Number UN Pack Group UN Class ICAO/IATA Class

6 Page Number: 6 of 6 Shipping Name DOT Hazard Class Technical Name SECTION XV REGULATORY INFORMATION SECTION XVI OTHER INFORMATION THIS MATERIAL SAFETY DATA SHEET IS INTENDED TO MEET THE SPECIFIC REQUIREMENTS OF 29 CFR AND SHOULD BE USED ACCORDINGLY. WHILE THE INFORMATION HAS BEEN OBTAINED FROM SOURCES BELIEVED TO BE ACCURATE AND RELIABLE, NO WARRANTY, EXPRESSED OR IMPLIED, CAN BE MADE WITH REGARD TO ITS COMPLETENESS, CORRECTNESS OR ACCURACY. ANY USERS OR HANDLERS OF THIS PRODUCT WHO ARE NOT UNDER THE DIRECT CONTROL OF KERRY ARE RESPONSIBLE FOR EVAULATING THIS INFORMATION IN LIGHT OF THEIR PARTICULAR SITUATION AND ARE RESPONSIBLE FOR ALL LOSSES, DAMAGES OR EXPENSES THAT RESULT WHILE THIS MATERIAL IS UNDER THEIR CONTROL. IT IS THE USER S RESPONSIBILITY TO DETERMINE SAFE CONDITIONS FOR USE AND TO ASSUME LIABILITY FOR LOSS, INJURY, DAMAGE OR EXPENSE RESULTING FROM IMPROPER USE OF THIS PRODUCT. IT IS ALSO THE RESPONSIBILITY OF THE USERS AND HANDLERS TO OBSERVE ANY AND ALL LAWS AND REGULATIONS (FEDERAL, STATE AND LOCAL) CONCERNING THE TRANSPORTATION, USE, HANDLING, STORAGE AND DISPOSAL OF THIS PRODUCT. Last Page