INDUSTRIAL PRETREATMENT INSPECTION REPORT

Transcription

1 Rockaway Valley Regional Sewerage Authority RD #1, 99 Greenbank Road Boonton, NJ (973) / Fax (973) INDUSTRIAL PRETREATMENT INSPECTION REPORT Date of Inspection: Time of Inspection: Name of Industrial User: Mailing Address: Facility Location Address: IU is classified as: Categorical (CIU) Significant (SIU) User of Concern Primary Contact/Title: Secondary Contact/Title: Tertiary Contact/Title: Rep. present during Inspection: Is IU currently in SNC? If YES, for what? What safety gear is needed to inspect this facility? Steel toe shoes Safety glasses Ear plugs Hard Hat PART 1: INITIAL INTERVIEW Part 1A: General Information 1. Type of Business conducted at this facility: 2. Principal Raw Material(s) used? 3. Principal Product(s) produced? 4. Production process is: Batch Continuous % Batch % Continuous 5. List all additional activities and specific processes occurring at this facility: Page: 1

2 6. Facility generates why types of wastes? 7. Wastes are discharged to? 8. Names of wastes haulers? 9. Is there a SPILL PREVENTION CONTROL PLAN AT THIS FACILITY? Yes* No 10. Does this facility have an existing NDPES or NJDPES discharge permit? Yes * No *If YES, did this facility supply RVRSA with copies of these permits/plans? Yes No 11. Year Production began at this facility: 12. Hours of Operation: Shifts: 13. Days / Week: Number of Employees: Additional Comments: Part 1B: Water Source and Use 1. Raw Water Sources: Public Water Supply (Specify: ) Private Well(s) Surface Water (Specify: ) 2. Are Raw Water Sources METERED or are other means available for Flow Measurement? Specify: 3. Describe any water treatment or conditioning processed utilized: 4. Average Daily Water Use (gpd): Part 1C: Restaurant/Food Service Information 1. Is there a restaurant/food service establishment at this facility? Yes No 2. Hours of Operation? AM to PM N/A Page: 2

3 3. Seating Capacity: N/A 4. Grease Trap(s): Yes* No N/A * If YES, how many and where are they located? 5. How often maintained/cleaned? (Please attach manifest if available): Part 1D: Other Wastes 1. Are any liquid wastes or sludges from this facility disposed of by means other than discharging to the local sewer system? Yes * No *If YES, describe the other means in which liquid wastes/sludges are disposed of: 2. Will any liquid product (process/waste) be present on the premises in quantities GREATER than 1,000 gallons? Yes* No *If YES, please identify all liquids (process/wastes): 3. Does this facility generate any waste process/residual materials? Yes* No *If YES, describe waste materials: 4. Quantity generated per month? N/A 5. How it is stored/disposed of? N/A 6. Does this facility have a designated/centralized area(s) for the storage of hazardous waste? Yes No N/A (No hazardous waste generated) Part 1E: Toxic Organics Management 1. Are CATEGORICAL ORGANICS used at this facility? Yes* No N/A *If YES, describe: Type How Much How Used Page: 3

4 2. Has this facility chosen the TTO plan option? Yes* No N/A *If YES, has the TTO Management Plan been submitted for approval? Yes No N/A 3. Are other NON-CATEGORICAL ORGANICS used on-site in more than laboratory quantities? Yes No N/A Type How Much How Used Part 1F: Environmental Control Permits/Registrations Held Permits/Registrations (other then RVRSA): NJPDES (specify type and permit No. NJ ) Yes No Air Pollution (Site ID No. ) Yes No RCRA ( Generator, Storage (90 days) Treatment) Yes No ID No. NJD: Other (Specify: ) Yes No Not Applicable (IU holds no additional permits/registrations) PART 2: PLANT TOUR: Visit all areas where wastewater is generated or where there are drains to the POTW. Part 2A: Production and Storage Areas 1. Are there floor drains in the production area? YES/NO Where do they go? 2. Are production areas diked, contained, or otherwise constructed in such a way as to prevent harm to the WWTP, especially from spills or slugs? YES/NO Comments: 3. Are there floor drains in the storage area(s)? YES/NO Where do they go? 4. Are storage tanks and areas diked, contained, or otherwise constructed in such a way as to prevent harm to the WWTP, especially from spills and slugs? YES/NO Comments: 5. Are process and storage tanks and pipes labeled? YES/NO 6. How are off-spec raw materials, and products disposed of? Page: 4

5 7. Are Grease-traps, oil and water separators, and holding/storage tanks cleaned? YES/NO How often are they cleaned? 8. When is the production area cleaned? 9. Is the wastewater from cleaning the production area discharged to the POTW? YES/NO 10. What non-process wastewaters are discharged to POTW? Comments: Part 2B: Pretreatment System: Ask the operator or IU Representative to describe pretreatment system. 1. What type of PRETREATMENT is at this facility? 2. Does operator/representative seem knowledgeable about the system? YES/NO Comments: 3. Is there a LICENSED OPERATOR for the pretreatment system? Yes* No N/A *If YES, name of operator(s): NJDEP Classification(s): 4. Are all units operational? YES/NO 5. How often does operator/maintenance person check system? 6. Is there an operator for each shift? YES/NO 7. How and when is sludge or wastes disposed of? 8. Manifest copies available? YES/NO Comments: 9. Is there a schedule for preventative maintenance? YES/NO Page: 5

6 AdditionalComments: Part 2C: Sampling Point, Sampling and Flow Measurement 1. Describe sampling point(s): (attach picture/drawing if necessary): 2. Is the sampling point representative of the operations they are intended to monitor? Yes No (if NO, list deficiencies): 3. Does an outside certified lab complete sampling? YES/NO *If YES, name of Lab: Lab ID No.: 4. Ask the industry representative to describe sampling procedures: 5. Samples are: Grab 5 Hr. Composite 24 Hr. Composite 6. Amount of process wastewater discharged (gpd): 7. Is flow measurement equipment operational? YES/NO Comments: 8. Is there a calibration log for flow meter? YES/NO Comments: 9. Brand and Model of meter: 10. Does metered waste include sanitary? YES/NO Comments: 11. When was the last time meter was calibrated by the manufacturer s authorized service representative? AdditionalComments: Page: 6

7 PART 3: EXIT INTERVIEW: Review monitoring records and other industry records required by ISCP. 1. Are files well organized? YES/NO Comments: 2. Are sample collection/chain of custody forms filled out properly? YES/NO Comments: 3. Do results in files agree with reports sent to the POTW? YES/NO Comments: 4. Who has authority to shut down production should a spill or slug discharge occur? 5. How does industry inform employees of whom to call at POTW in case of spill/slug? 6. Is Industry implementing slug/spill plan? YES/NO Comments: Comments: PART 4: INSPECTION RESULTS: Slug/Spill Control Plan needed? YES/NO Will additional data be sent to POTW? If so, what? PART 5: SUMMARY OF AREA(S) INSPECTED: A) Production area(s) inspected? Yes No N/A B) Laboratories (R&D, QC) Inspected? Yes No N/A C) Chemical Storage area(s) Inspected? Yes No N/A D) Slug/Spill Containment area(s) Inspected? Yes No N/A E) Hazardous Waste storage area(s) Inspected? Yes No N/A F) Sampling Location(s) Inspected? Yes No N/A G) Pretreatment Facility Inspected? Yes No N/A H) Grease-traps, O/W Separators, Holding/ Storage tanks Inspected? Yes No N/A I) Filing/Data System Inspected? Yes No N/A Page: 7

8 Comments, Required or Recommended Actions: Signature of Inspector(s): 1. Name (Print): Date: Signature: 2. Name (Print): Date: Signature: Reviewed by: Date: Signature: Page: 8