: Sodium Azide, 0.5% w/v
|
|
- Ferdinand Warner
- 5 years ago
- Views:
Transcription
1 Date of issue: 09/09/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code Other means of identification : Mixture : : LC22940 : Sodium Azide Solution for Chromium 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : For laboratory and manufacturing use only Details of the supplier of the safety data sheet LabChem Inc Jackson's Pointe Commerce Park Building 1000, 1010 Jackson's Pointe Court Zelienople, PA USA T F info@labchem.com Emergency telephone number Emergency number : CHEMTREC: or SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GHS-US classification Aquatic Chronic 3 H Label elements GHS-US labelling Hazard statements (GHS-US) Precautionary statements (GHS-US) : H412 - Harmful to aquatic life with long lasting effects : P273 - Avoid release to the environment P501 - Dispose of contents/container to comply with local, state and federal regulations 2.3. Other hazards Other hazards not contributing to the classification 2.4. Unknown acute toxicity (GHS-US) No data available : None under normal conditions. SECTION 3: Composition/information on ingredients 3.1. Substance 3.2. Mixture Name Product identifier % GHS-US classification Water (CAS No) Not classified Sodium Azide (CAS No) Acute Tox. 2 (Oral), H300 Acute Tox. 1 (Dermal), H310 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Assure fresh air breathing. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. 09/09/2014 EN (English) Page 1
2 First-aid measures after eye contact First-aid measures after ingestion : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use Indication of any immediate medical attention and special treatment needed Obtain medical assistance. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Protective equipment Emergency procedures For emergency responders Protective equipment Emergency procedures : Safety glasses. Gloves. : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment Methods and material for containment and cleaning up Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour Conditions for safe storage, including any incompatibilities Storage conditions : Keep only in the original container in a cool, well ventilated place away from : metals. Keep container closed when not in use. Incompatible products : Strong acids. copper. lead. Incompatible materials : Sources of ignition. Direct sunlight Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters USA ACGIH ACGIH Ceiling (mg/m³) 0.29 mg/m³ USA ACGIH ACGIH Ceiling (ppm) 0.11 ppm 09/09/2014 EN (English) 2/7
3 8.2. Exposure controls Appropriate engineering controls Personal protective equipment Hand protection Eye protection Respiratory protection : Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure adequate ventilation. : Avoid all unnecessary exposure. : Wear protective gloves. : Chemical goggles or safety glasses. : Wear appropriate mask. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Colour : Colourless Odour : None. Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) Vapour pressure Relative vapour density at 20 C Relative density Density : 1 g/ml Solubility : Soluble in water. Water: Solubility in water of component(s) of the mixture : Sodium Azide: 42 g/100ml (17 C) Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. SECTION 10: Stability and reactivity Reactivity Chemical stability May form explosive compounds with lead and copper Possibility of hazardous reactions Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials Strong acids. Strong oxidizers. copper. lead. 09/09/2014 EN (English) 3/7
4 10.6. Hazardous decomposition products Nitrogen oxides. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity LD50 oral rat LD50 dermal rat ATE US (oral) ATE US (dermal) LD50 oral rat LD50 dermal rabbit ATE US (oral) ATE US (dermal) LD50 oral rat ATE US (oral) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) 5400 mg/kg 4000 mg/kg 5400 mg/kg bodyweight 4000 mg/kg bodyweight 27 mg/kg 20 mg/kg 27 mg/kg bodyweight 20 mg/kg bodyweight mg/kg mg/kg bodyweight Specific target organ toxicity (repeated exposure) Aspiration hazard Potential adverse human health effects and symptoms SECTION 12: Ecological information Toxicity Ecology - water LC50 fishes 1 EC50 Daphnia 1 : Based on available data, the classification criteria are not met. : Harmful to aquatic life with long lasting effects. 140 mg/l 96 hr. 840 mg/l 48 hr. LC50 fishes mg/l 96 h; Salmo gairdneri (Oncorhynchus mykiss) LC50 other aquatic organisms mg/l (96 h) EC50 Daphnia mg/l (48 h; Daphnia pulex) EC50 other aquatic organisms mg/l (Protozoa; Toxicity test) LC50 fish mg/l (96 h; Lepomis macrochirus) TLM fish ppm (24 h; Lepomis macrochirus) Threshold limit other aquatic organisms ,96 h Persistence and degradability Persistence and degradability May cause long-term adverse effects in the environment. 09/09/2014 EN (English) 4/7
5 Persistence and degradability Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD BOD (% of ThOD) Persistence and degradability Biodegradability: not applicable Bioaccumulative potential Bioaccumulative potential Bioaccumulative potential Bioaccumulative potential Not bioaccumulative Mobility in soil Other adverse effects Effect on ozone layer Effect on the global warming : : No known ecological damage caused by this product. : Avoid release to the environment. SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations Ecology - waste materials : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to comply with local, state and federal regulations. : Avoid release to the environment. SECTION 14: Transport information In accordance with DOT Not regulated for transport Additional information : No supplementary information available. ADR Transport document description : Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory This product or mixture does not contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40 CFR (a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372. Listed on United States SARA Section /09/2014 EN (English) 5/7
6 RQ (Reportable quantity, section 304 of EPA's List of Lists) : SARA Section 302 Threshold Planning Quantity (TPQ) 1000 lb 500 lb International regulations CANADA WHMIS Classification Uncontrolled product according to WHMIS classification criteria Listed on the Canadian DSL (Domestic Sustances List) Listed on the Canadian DSL (Domestic Sustances List) WHMIS Classification Uncontrolled product according to WHMIS classification criteria EU-Regulations Classification according to Regulation (EC) No. 1272/2008 [CLP] Classification according to Directive 67/548/EEC or 1999/45/EC Not classified National regulations Listed on the Canadian IDL (Ingredient Disclosure List) US State regulations California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer and/or reproductive harm SECTION 16: : : None. Full text of H-phrases: see section 16: Acute Tox. 1 (Dermal) Acute toxicity (dermal), Category Acute Tox. 2 (Oral) Acute toxicity (oral), Category Aquatic Acute 1 Hazardous to the aquatic environment Acute Hazard, Category Aquatic Chronic 1 Hazardous to the aquatic environment Chronic Hazard, Category Aquatic Chronic 3 Hazardous to the aquatic environment Chronic Hazard, Category H300 Fatal if swallowed H310 Fatal in contact with skin H400 Very toxic to aquatic life H410 Very toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects 09/09/2014 EN (English) 6/7
7 NFPA health hazard NFPA fire hazard NFPA reactivity : 1 - Exposure could cause irritation but only minor residual injury even if no treatment is given. : 0 - Materials that will not burn. : 0 - Normally stable, even under fire exposure conditions, and are not reactive with water. HMIS III Rating Health Flammability Physical Personal Protection : 1 Slight Hazard - Irritation or minor reversible injury possible : 0 Minimal Hazard : 0 Minimal Hazard : B SDS US (GHS HazCom 2012) Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 09/09/2014 EN (English) 7/7
: Aluminum Hydroxide Suspension
Date of issue: 10/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC10840
More information: Methyl Orange, 0.1% Aqueous
Date of issue: 01/31/2014 Revision date: 05/20/2014 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Sodium Carbonate, 1.0N (0.5M)
Date of issue: 01/22/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC23380
More information: Ammonium Oxalate, Saturated
Date of issue: 07/09/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC11282
More information: Potassium Iodide, 0.5% w/v
Date of issue: 12/20/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium
More information: Ammonium Sulfate, 10% w/v
Date of issue: 04/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Ammonium
More information: Sodium Citrate, 30% w/v
75126 Date of issue: 04/11/1999 Revision date: 07/30/2013 Supersedes: 11/08/2011 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Conductivity Standard, 1500 µmho/cm
Date of issue: 12/17/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Conductivity
More information: Conductivity Standard, 1000 µmho/cm
Date of issue: 12/17/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Conductivity
More information: Sodium Chloride, 30% w/v
Date of issue: 07/29/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Sodium
More information: Glucose-Glutamic Acid
Date of issue: 12/09/2013 Revision date: 03/05/2014 Supersedes: 12/09/2013 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Calmagite Indicator, 0.1% Aqueous
Date of issue: 11/25/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC12850
More information: HEPES Buffered Saline
Date of issue: 04/14/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : HEPES
More information: Potassium Hydroxide, 0.05N (0.05M)
Date of issue: 12/19/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium
More information: Phosphate (as Phosphorus) Standard, 1000ppm P
Date of issue: 08/09/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : : LC18590
More information8% Sodium Bicarbonate, Solution
8% Sodium Bicarbonate, Solution Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : 8% Sodium
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking
Date of issue: 09/27/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name. : Product code : LC14270
More information: Sodium Thiosulfate, 0.2N (0.2M)
Date of issue: 07/10/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Sodium
More information: Silica Standard, 1000 ppm
Date of issue: 04/25/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Silica
More information: Barium Chloride, 0.1N (0.05M)
Date of issue: 04/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Barium
More information: Potassium Iodate-Iodide, N ( M)
Date of issue: 09/23/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Potassium
More information: Ferroin Oxidation-Reduction Indicator
75070 Date of issue: 10/04/1998 Revision date: 07/30/2013 Supersedes: 11/08/2011 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Ammonium Oxalate, 4% w/v
Date of issue: 07/09/2014 Revision date: 03/06/2017 Supersedes: 11/30/2016 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC11280 1.2.
More information3.1. Substance Not applicable Full text of H-phrases: see section Mixture Name Product identifier % GHS-US classification
Date of issue: 12/05/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Buffer Solution ph
More information: Bromophenol Blue, 0.1% Aqueous
Date of issue: 01/31/2014 Revision date: 12/19/2016 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Bromophenol Blue,
More information: Murexide, 0.15% in Ethylene Glycol
Date of issue: 08/16/2007 Revision date: 08/15/2014 Supersedes: 09/27/2013 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Copper Sulfate, 0.02M (0.02N)
Date of issue: 02/05/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC13443
More information: Chloride Standard, 500 ppm (0.0141N)
Revision date: 04/08/2013 Supersedes:04/07/2010 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product
More information: Fluoride Standard, 1000 ppm
Date of issue: 04/19/2013 Revision date: 07/14/2016 Supersedes: 04/19/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Fluoride Standard,
More information: Chloride Standard, 1000 ppm (0.0282N)
Date of issue: 04/08/2013 Revision date: 03/20/2017 Supersedes: 03/17/2014 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Sodium Carbonate, 1.0N (0.5M)
Date of issue: 01/22/2014 Revision date: 03/20/2018 Supersedes: 03/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Carbonate,
More information: Conductivity Standard, 84 µmho/cm
Date of issue: 12/17/2013 Revision date: 04/26/2017 Supersedes: 04/26/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Conductivity Standard,
More information: Sodium Carbonate, 5% w/v
Date of issue: 01/22/2014 Revision date: 03/20/2018 Supersedes: 03/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Carbonate,
More information: Alizarin Red S, 1% Aqueous
Date of issue: 11/01/2013 Revision date: 09/27/2016 Supersedes: 11/01/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Alizarin Red S,
More information: Nitrate Standard, 1000 ppm (as Nitrogen)
Date of issue: 12/16/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Nitrate
More information: Potassium Oxalate, 2% w/v
Date of issue: 11/21/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Oxalate,
More information: Potassium Permanganate, 4% w/v
Date of issue: 02/04/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium
More information: Ferric Ammonium Sulfate, Saturated
Date of issue: 09/27/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Ferric
More information: Methyl Orange, Modified
Date of issue: 04/10/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Methyl
More information: Sodium Sulfite, 5% w/v
Date of issue: 05/06/2015 Revision date: 04/11/2018 Supersedes: 05/06/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC24940 1.2.
More information: Thymol Blue, Sodium Salt
Date of issue: 08/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Chemical name
More information: Calcium Chloride, 0.02M (0.04N)
Date of issue: 08/28/2014 Revision date: 12/29/2016 Supersedes: 08/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Calcium Chloride,
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking
Date of issue: 06/12/2013 Revision date: 10/01/2013 Supersedes: 06/12/2013 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information3.1. Substance Not applicable Full text of H-phrases: see section Mixture Name Product identifier % GHS-US classification
Date of issue: 12/05/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Buffer Solution ph
More information: Murexide, 0.15% in Ethylene Glycol
75494 Date of issue: 08/16/2007 Revision date: 09/27/2013 Supersedes: 08/16/2007 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Carbon Standard, 1000ppm, Inorganic
Date of issue: 10/14/2014 Revision date: 03/14/2017 Supersedes: 10/14/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Carbon Standard,
More information: Bromothymol Blue, Sodium Salt
Date of issue: 10/24/2007 Revision date: 05/22/2014 Supersedes: 10/09/2013 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Sodium Azide, 0.5% w/v
Date of issue: 09/09/2014 Revision date: 03/12/2018 Supersedes: 09/09/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: None under normal conditions Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Date of issue: 05/11/2015 Revision date: 01/25/2017 Supersedes: 05/11/2015 Version: 1.1 : Mixtures Product name : Product code : LC26670 1.2.
More information: Nitrate Standard, 1000 ppm (as Nitrogen)
Date of issue: 12/16/2013 Revision date: 12/16/2016 Supersedes: 12/16/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Nitrate Standard,
More information: Ammonium Thiocyanate, 0.1N (0.1M)
Date of issue: 08/13/2014 Revision date: 12/06/2016 Supersedes: 08/13/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : LC11370 1.2. Relevant
More information: Ammonium Chloride, 0.1M (0.1N)
Date of issue: 01/27/2014 Revision date: 11/02/2016 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Ammonium Chloride, 0.1M (0.1N) : LC10975
More information: Potassium Iodide, 2% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : M77684 1.2. Relevant identified uses of the
More informationPHT Ascent 90 Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Product code : M51349 1.2. Relevant identified uses of the
More information: Ammonium Chloride, 85 g/l
Date of issue: 01/27/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC10990
More information: Sodium Bromide, ACS
Date of issue: 05/04/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Sodium Bromide,
More information: Potassium AA Standard, 100 ppm
Date of issue: 07/28/2014 Revision date: 01/30/2018 Supersedes: 07/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium AA Standard,
More information: Potassium AA Standard, 1000 ppm
Date of issue: 07/28/2014 Revision date: 01/30/2018 Supersedes: 07/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium AA Standard,
More information: Sodium AA Standard, 1000 ppm (1mL = 1mg Na)
Date of issue: 05/04/2015 Revision date: 12/22/2016 Supersedes: 05/04/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Sodium AA Standard,
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
Date of issue: 12/12/2013 Revision date: 01/17/2017 Supersedes: 12/12/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : EDTA, 0.1M (0.2N)
More information: Phenol Red, 0.1% Aqueous
Date of issue: 04/20/2015 Revision date: 01/17/2018 Supersedes: 01/17/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Phenol Red, 0.1%
More information: Barium Chloride, 20% w/v
Date of issue: 04/30/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC11605
More information: Ammonium Phosphate, Dibasic
SECTION 1: Identification 1.1. Identification Product form Substance name Ammonium Phosphate, Dibasic Date of issue: 01/24/2014 Revision date: 11/30/2016 Supersedes: 01/24/2014 Version: 1.1 : Substance
More information: Methylene Blue, 1% Aqueous
Date of issue: 05/31/2013 Revision date: 01/09/2018 Supersedes: 01/28/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 02/26/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Ammonium Hydroxide,
More information: Toluidine Blue, 1% Aqueous
Date of issue: 08/20/2014 Revision date: 05/15/2018 Supersedes: 08/20/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC26165 1.2.
More information: Citric Acid, 1.0M (3.0N)
Date of issue: 12/10/2013 Revision date: 04/04/2017 Supersedes: 10/10/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Citric Acid, 1.0M
More information: RT100S G or D Big Blu
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : 1.2. Relevant identified uses of the substance or mixture
More information: SPU60 Iodine Fixative Remover
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : SPU60 1.2. Relevant identified uses of the
More information: Sodium Bicarbonate-Sodium Chloride Solution
Date of issue: 01/22/2014 Revision date: 03/13/2018 Supersedes: 03/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Bicarbonate-Sodium
More information: Potassium Chloride, 4M, Saturated with Silver Chloride
Potassium Chloride, 4M, Saturated with Silver Chloride Date of issue: 11/29/1998 Revision date: 01/31/2018 Supersedes: 06/27/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form
More information: Magnesium Sulfate, 2.25% w/v
Date of issue: 12/23/2013 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Magnesium Sulfate,
More information: Congo Red Indicator, 0.1% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/15/2014 Revision date: 04/20/2018 Supersedes: 12/15/2014 Version: 1.1 : Mixtures : : LC13360 1.2.
More information3.2. Mixture Name Product identifier % GHS-US classification. advice (show the label where possible).
Revision date: 10/15/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Anti Microbial Hand Soap- 8312;
More information: Murexide Indicator, Dry in Sodium Chloride
Date of issue: 12/05/2013 Revision date: 01/09/2018 Supersedes: 01/09/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Murexide Indicator,
More information: Potassium Iodate-Iodide, N ( M)
Date of issue: 09/23/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodate-Iodide,
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Syringe : M77903 1.2. Relevant identified uses
More information: Potassium Hydroxide, 0.1N (0.1M)
Date of issue: 12/19/2013 Revision date: 02/06/2018 Supersedes: 02/06/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Hydroxide,
More information: New Methylene Blue N
Date of issue: 04/17/2015 Revision date: 01/10/2018 Supersedes: 04/17/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : New Methylene Blue
More information: HomeFront Lawn Weed Killer Ready to Use
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Product code : 221786591901 1.2. Relevant identified uses of the substance or mixture
More informationProduct name : PLANT HEALTH technologies CHE-CALCIUM 3%
SECTION 1: Identification 1.1. Identification Product form : Mixture Product name : PLANT HEALTH technologies CHE-CALCIUM 3% Product code : M77341 1.2. Relevant identified uses of the substance or mixture
More informationLORANN OILS, INC Aurelius Road Office (800)
Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 05/06/2015 Version: 1 SECTION 1: Identification of the substance/mixture
More informationLORANN OILS, INC Aurelius Road Office (800)
0605 Colorless Caramel Flavor, Natural/Artificial Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 09/28/2015 Version: 1
More information: Ammonia Standard, 1000ppm
Date of issue: 06/16/2014 Revision date: 09/29/2017 Supersedes: 06/16/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Ammonia Standard,
More information: Picric Acid, Saturated
75363 Date of issue: 12/21/1999 Revision date: 07/26/2013 Supersedes: 09/12/2011 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Sodium Chloride, 5% w/v
Date of issue: 07/26/2013 Revision date: 03/27/2018 Supersedes: 03/27/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Chloride,
More informationRT150S G or D Big Blu SubZero Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / SDS Created 01/01/2017
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : RT150S G or D Big Blu SubZero 1.2. Relevant identified uses
More information: Potassium Iodide, 10% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
More information: Maleic Acid Solution
Date of issue: 06/11/2013 Revision date: 06/11/2013 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixtures
More information: Ferroin Oxidation-Reduction Indicator
Date of issue: 10/04/1998 Revision date: 06/27/2017 Supersedes: 09/15/2015 Version: 1.3 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: COMPLETE TRUCK WASH
Date of issue: 04/08/1999 Revision date: 06/10/2014 Supersedes: 04/08/1999 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: PLANT HEALTH technologies Volare DC
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : M77704 1.2. Relevant identified uses of the
More information: BIO 101 Bio-Zyme Cleaner/Deodorant
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 155-5191 : 1.2. Relevant identified uses of the substance or mixture and uses
More information: Chemtrec (USA/Canada), (Intl)
Revision date: 05/30/2014 : Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. : Mixtures : RBC Lysis Buffer
More information