Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

Transcription

1 Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) QUALIFICATION LOGBOOK September 2017 Version 4.8 Candidate Logbook/Work-Based Evidence Record Mandatory units

2 Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) Mandatory units Qualification title Level 3 NVQ Diploma in Wood Occupations (Construction) Site Carpentry Level 3 NVQ Diploma in Wood Occupations (Construction) Architectural Joinery Level 3 NVQ Diploma in Wood Occupations (Construction) Wheelwrighting Level 3 NVQ Diploma in Wood Occupations (Construction) Shopfitting Site Work Level 3 NVQ Diploma in Wood Occupations (Construction) Shopfitting Bench Work Level 3 NVQ Diploma in Wood Occupations (Construction) Structural Post and Beam Carpentry Level 3 NVQ Diploma in Wood Occupations (Construction) Timber Frame Erection City & Guilds qualification number Qualification Accreditation Number (QAN) /7849/ /7849/ /7849/ /7849/ /7849/ /7849/ /7849/2 2 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

3 City & Guilds Believe you can Version and date Change detail Section 4.1 August 2015 Unit number 727 correctly updated; phone Structures; final numbers removed page 4.2 September 2015 Unit numbers 313 and 343 correctly updated; title correctly updated 4.3 Sep 2015 Corrected numbers for unit 501 Units 4.4 Nov 2015 Added assessment criteria 3.2 for unit 347 Units Structures; Tracking Document; Mandatory units 4.5 Dec 2015 UAN corrected for units 342 and 344 Structures 4.6 March 2016 City & Guilds Group statement updated Phone numbers deleted Minor amendments to the following units: 248, 344, 611, 614, 714 Useful contacts Useful contacts Units 4.7 April 2016 Amended Unit 714 LO 7.5 & 7.7 Units 4.8 September 2017 Rules of combination amended for POS 31 and 28 Unit 602 replaced with unit 652 Unit 611 replaced with unit 651 Structures Units City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 3

4 Contents 1 About your Candidate Logbook/Work-Based Evidence Record Contact details Introduction to the logbook 7 2 About your approved centre 8 3 About candidates 10 4 Qualification assessment Before you start your qualification The assessment process 12 5 Using your logbook Candidate job profile Structures Skill scan/initial assessment Mandatory units Tracking Document On site assessment plan/feedback On site observation report Professional discussion supplementary evidence sheet Oral questioning supplementary evidence sheet Photographic supplementary evidence Work-based recorder/expert witness details Assessor continuation sheet Signature Sheet 49 Unit 101 Conforming to general health, safety and welfare in the workplace 50 Unit 247 Erecting timber roof structures in the workplace 56 Unit 248 Fabricating timber framework in the workplace 63 Unit 277 Installing shopfitting fitments in the workplace 71 Unit 278 Installing shopfitting frames and finishings in the workplace 79 Unit 279 Installing shopfronts and finishings in the workplace 87 Unit 301 Confirming the occupational method of work in the workplace 95 Unit 302 Unit 305 Confirming work activities and resources for an occupational work area in the workplace 100 Designing and fabricating structural timber connections in the workplace 104 Unit 325 Manufacturing bespoke shopfitting products in the workplace 112 Unit 326 Manufacturing bespoke wheelwrighting products in the workplace 120 Unit 336 Setting up and using fixed machinery in the workplace 128 Unit 344 Manufacturing bespoke architectural joinery products in the workplace 136 Unit 346 Installing bespoke first fixing components in the workplace 144 Unit 347 Installing bespoke second fixing components in the workplace 152 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 4

5 Unit 348 Unit 501 Co-ordinating and Confirming Dimensional Control Requirements of the Work in the Workplace 160 Developing and maintaining good occupational working relationships in the workplace 164 Unit 603 Manufacturing routine wheelwrighting products in the workplace 168 Unit 605 Unit 606 Unit 614 Marking out from setting out details for routine shopfitting products in the workplace 175 Marking out from setting out details for routine wheelwrighting products in the workplace 184 Marking out from setting out details for routine architectural joinery products in the workplace 192 Unit 651 Manufacturing routine architectural joinery products in the workplace 199 Unit 652 Manufacturing routine shopfitting products in the workplace 207 Unit 714 Unit 715 Unit 718 Unit 719 Unit 727 Setting up and using transportable cutting and shaping machines in the workplace 215 Slinging and hand signalling the movement of suspended loads in the workplace 224 Producing setting out details for routine shopfitting products in the workplace 234 Producing setting out details for routine wheelwrighting products in the workplace 242 Producing setting out details for routine architectural joinery products in the workplace 250 Appendix 1 Summary of City & Guilds assessment policies 257 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 5

6 1 About your Candidate Logbook/Work-Based Evidence Record 1.1 Contact details Candidate name Candidate address Centre name Centre number Programme start date City & Guilds registration number Date of registration with City & Guilds This Candidate Logbook/Work-Based Evidence Record is your personal achievement in practical work carried out mostly in the workplace and knowledge assessments achieved. It may not be possible to replace this document, therefore it should be kept in good condition and in a safe place to be used by you to record your progress. Once completed, you must keep this portfolio for a period of three years. During this time your training centre can request that you submit your portfolio to them. This will be returned to you. Keep a record of relevant contact details in the space provided below. You may find it helpful to make a note of phone numbers and addresses here. Your Assessor(s) Internal Quality Assurer (IQA) Quality Consultant (QC) 6 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

7 1.2 Introduction to the logbook This logbook will help you complete the units in Level 3 NVQ Diploma in Wood Occupations (Construction) (6571). It contains forms you can use to record your evidence of what you have done. There are 6 pathways within the Diploma. You should discuss and agree with your assessor /tutor which pathway and which units you are going to work towards. This Logbook contains the 24 mandatory units only. The optional units can be found in a zip file on the City & Guilds Website. About City & Guilds City & Guilds is your awarding body for this qualification. City & Guilds is the UK s leading awarding body for vocational qualifications. Information about City & Guilds and our qualifications is available on our website 7 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

8 2 About your approved centre Types of approved centres Assessment for your qualification will be carried out at your centre. Your centre may be your place of work, a college, training provider or a combination of these. City & Guilds approves centres to offer their qualifications and regularly monitors them to make sure they meet our quality standards and follow our assessment policies. Centre responsibilities Your centre is responsible for the administration of your qualification. Centre staff will: register you with City & Guilds give you your City & Guilds enrolment number apply for your certificate(s) when you have completed your qualification or units. Centres are also responsible for supporting you as your work towards your NVQ. Centres will: carry out an initial assessment with you tell you about any learning or training (and resources) you will need to help you complete your qualification provide an induction programme to explain how the assessment process works produce an assessment plan for you. Assessment roles The following people at your centre will help you achieve your qualification. The Assessor The assessor is the person you will have the most contact with as you work towards your qualification. Your assessor will: help you identify any training you need agree an assessment plan with you help you plan and organise your workload and evidence observe you carrying out your job in the workplace over a period of time ask you questions about the work you do make decisions about your evidence judge when you are competent and meet the national standards give you feedback about your evidence and competence. You may have more than one assessor depending on which units of the qualification you take. The Internal Quality Assurer (IQA) The Internal Quality Assurer (IQA) maintains the quality of assessment within the centre. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 8

9 The Work-Based Recorder/Expert Witness The role of the work-based recorder/expert witness is to: observe you carrying out work activities take photographs as evidence of work carried out authenticate work based recordings and testimonies ensure all work meets current industrial standards ensure all work is carried out in a safe manner be in regular communication with your assessor to evaluate your performance on site try to make sure you get the relevant work experience needed to meet the criteria of your NVQ provide support, guidance and motivation to help you complete your NVQ successfully 9 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

10 3 About candidates Candidate role and responsibilities Your responsibilities as a City & Guilds candidate are to: provide your centre with your personal details so you can be registered with City & Guilds participate in an initial assessment and induction agree a personal assessment plan with your assessor collect and organise your evidence as agreed in your assessment plan attend regular meetings with your assessor to discuss your progress and to amend your plan when required meet with other centre and City & Guilds staff to talk about your qualification and evidence make sure you understand and comply with health and safety law and regulations. Your centre may ask you to agree and sign a learning contract with them to show how you will be assessed for your qualification. Learner registration number Make sure you keep a note of your unique City & Guilds registration number on the front page of this logbook. Moving to a new centre If you change jobs or move to a new centre before you complete your qualification, you may be able to complete it at a new centre. Ask your centre to apply for any certificates of unit credit for you before you leave, and add them to your records. A new centre will need your candidate enrolment number, your assessment records and evidence to help you complete your qualification. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 10

11 4 Qualification assessment 4.1 Before you start your qualification Initial assessment Before you start work on your qualification you will meet with your assessor to discuss what you need to do to complete your qualification. This can include: checking you are taking the right qualification level checking you have chosen suitable units identifying any training or learning you will need to help you gain your qualification agreeing an assessment plan signing a learning contract. Skill scan As part of this meeting, you will discuss the skills and knowledge you may already have, and decide how this can be used towards your qualification. This process is sometimes called a skill scan. There is a Skill Scan Form in this logbook you can use to record the skills you may already have. 11 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

12 4.2 The assessment process Once you have chosen your units you will make and agree an assessment plan with your assessor. This will show: the units the plan covers when you will be assessed where the assessment will take place what you will be doing what evidence you will produce who will assess you. The plan should also indicate the methods of assessment to be used to collect your evidence. Evidence can include: direct observation in the workplace by a qualified assessor witness testimony of work carried out by you in the workplace written by an expert witness questioning this could be verbal, written or computer based other evidence which can include photographs or personal accounts. Assessment requirements Site Observations (SO) should be conducted in the workplace by your Assessor. For individual criteria not directly observed, evidence of your ability to complete a number of different tasks to confirm competence must be recorded. Types of evidence SO = Site Observation OQ = Oral Question WQ = Written Question & Answer WT = Witness Testimony PS = Photographic Supplementary PD = Professional Discussion The following people at your centre will explain the assessment and recording process and help you achieve your unit(s). The assessor/tutor The assessor/tutor is the person you will have the most contact with as you work towards your unit(s). You may have more than one assessor/tutor depending on which unit(s) you take or you may be assessed by a person who is not your tutor. The Internal Quality Assurer (IQA) The IQA maintains the quality of assessment within the centre. The Qualification Consultant (QC) The QC works for City & Guilds and helps to ensure that your centre meets the required standards for quality and assessment. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 12

13 5 Using your logbook Recording forms This logbook contains all of the forms you and your assessor will need to plan, review and organise your evidence. Your assessor will be able to help you decide which forms you need to complete and help you fill them in. Candidate job profile You can use this form to record your personal details if you don t already have a Candidate Résumé/ CV. Skill scan/initial assessment This can be used to record the skills and knowledge you may already have. This may be part of your initial assessment. Overall unit sign-off You can use this form to log your achievement of the units for the whole qualification including completion of assignments and online assessment On-site assessment plan/feedback You and your assessor will use this form to plan each assessment session. Your assessor will use this form to give feedback on the task. It will also enable you and your assessor to plan what actions need to be done before the next session. On-site observation report Your assessor will complete during observation. You will both sign this as a true record. Professional discussion supplementary evidence sheet To be completed by you, your work-based recorder or another witness to evidence meeting assessment criteria that could not be signed off during direct observation with your assessor. Oral questioning supplementary evidence sheet Your assessor will use this form to log any additional questions and answers asked during observation or to mop up any missing evidence. Photographic supplementary evidence Use this form to include a photo and brief description of the task being carried out. Work-based recorder details To be completed by your work-based recorders to confirm occupational competence. Assessor briefing and report continuation sheet Additional space for your assessor to make notes Signature sheet This is used to record the details of staff that will provide you with witness testimony. Units These record where the evidence you produce meets the requirements of the unit. You should give each piece of evidence an evidence reference number. Please photocopy these forms as many times as required to log the evidence. 13 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

14 5.1 Candidate job profile If you already have your own CV you can use that instead of this form. Candidate name: Place of work: Assessor: Outline of job role: Previous roles & responsibilities relevant to the qualification: Previous qualification and training relevant to the qualification Qualification/Training Where achieved Date achieved Grade City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 14

15 5.2 Structures To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Site Carpentry ( ), learners must achieve 146 credits in total; 100 credits must be achieved from the mandatory units and a minimum of 46 credits from the optional units available. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 346 Y/506/ Installing bespoke first fixing components in the workplace 347 D/506/ Installing bespoke second fixing components in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace 714 T/506/ Setting up and using transportable cutting and shaping machines in the workplace Optional units 235 M/503/ Erecting structural carcassing components in the workplace 313 M/503/ Erecting complex roof structure carcassing components in the workplace 343 J/506/ Maintaining non-structural or structural components in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

16 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Architectural Joinery ( ), you must achieve 121 credits in total; 101 credits must be achieved from the mandatory units and a minimum of 20 credits from the optional units available. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 344 K/506/ Manufacturing bespoke architectural joinery products in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace 651 N/A 2 Manufacturing Routine Architectural Joinery Products in the Workplace 614 M/506/ Marking out from setting out details for routine architectural joinery products in the workplace 727 K/506/ Producing setting out details for routine architectural joinery products in the workplace Optional units 329 K/503/ Producing CAD setting out details in the workplace 342 M/506/ Producing setting out details for bespoke architectural joinery products in the workplace 336 A/503/ Setting up and using fixed machinery in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 16

17 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Wheelwrighting ( ), you must achieve 130 credits in total; 110 credits must be achieved from the mandatory units and a minimum of 20 credits from the optional units available. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 326 D/503/ Manufacturing bespoke wheelwrighting products in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace 603 A/503/ Manufacturing routine wheelwrighting products in the workplace 606 A/503/ Marking out from setting out details for routine wheelwrighting products in the workplace 719 Y/503/ Producing setting out details for routine wheelwrighting products in the workplace Optional units 334 Y/503/ Producing setting out details for bespoke wheelwrighting products in the workplace 336 A/503/ Setting up and using fixed machinery in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

18 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Shopfitting Site Work ( ), you must achieve a total of 104 credits from the mandatory units. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 277 J/503/ Installing shopfitting fitments in the workplace 278 F/503/ Installing shopfitting frames and finishings in the workplace 279 Y/503/ Installing shopfronts and finishings in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 336 A/503/ Setting up and using fixed machinery in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 18

19 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Shopfitting Bench Work ( ), you must achieve 121 credits in total; 101 credits must be achieved from the mandatory units and a minimum of 20 credits from the optional units available. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 325 Y/503/ Manufacturing bespoke shopfitting products in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace 652 N/A 2 Manufacturing routine shopfitting products in the workplace 605 D/503/ Marking out from setting out details for routine shopfitting products in the workplace 718 J/503/ Producing setting out details for routine shopfitting products in the workplace Optional units 329 K/503/ Producing CAD setting out details in the workplace 333 L/503/ Producing setting out details for bespoke shopfitting products in the workplace 336 A/503/ Setting up and using fixed machinery in the workplace 680 H/600/ Producing wood and wood-based products using Computer Numerically Controlled/Numerically Controlled (CNC/NC) machinery in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

20 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Structural Post and Beam Carpentry ( ), you must achieve 96 credits in total; 66 credits must be achieved from the mandatory units and a minimum of 30 credits from at least two of the optional units available. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 305 H/503/ Designing and fabricating structural timber connections in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace Optional units 304 Y/600/ Conserving or restoring heavy timber framework in the workplace 315 K/503/ Fabricating post and beam components in the workplace 329 K/503/ Producing CAD setting out details in the workplace 680 H/600/ Producing wood and wood-based products using Computer Numerically Controlled/Numerically Controlled (CNC/NC) machinery in the workplace 715 R/506/ Slinging and signalling the movement of loads (secondary role) in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 20

21 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Timber Frame Erection ( ), learners must achieve 121 credits in total. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 101 A/503/ Conforming to general health, safety and welfare in the workplace 247 D/506/ Erecting timber roof structures in the workplace 248 R/506/ Erecting timber walls and floors in the workplace 301 R/503/ Confirming the occupational method of work in the workplace 302 A/503/ Confirming work activities and resources for an occupational work area in the workplace 313 M/503/ Erecting complex roof structure carcassing components in the workplace 348 D/503/ Co-ordinating and confirming the dimensional control requirements of the work in the workplace 501 M/503/ Developing and maintaining good occupational working relationships in the workplace 715 R/506/ Slinging and signalling the movement of loads suspended loads in the workplace City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

22 5.3 Skill scan/initial assessment Mandatory units Qualification title: Level 3 NVQ Diploma in Wood Occupations (Construction) Qualification No: 6571 Candidate name: Unit Duties Examples Training Required 101 Conforming to general health, safety and welfare in the workplace Comply with all workplace health, safety and welfare legislation requirements. Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures. Comply with organisational policies and procedures to contribute to health, safety and welfare. Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area. Comply with and support all organisational security arrangements and approved procedures. 277 Installing shopfitting fitments in the workplace Interpret the given information relating to the work and resources when installing shopfitting fitments. Know how to comply with relevant legislation and official guidance when installing shopfitting fitments. Maintain safe working practices when installing shopfitting fitments. Select the required quantity and quality of resources for the methods of work to install shopfitting fitments. Minimise the risk of damage to the work and surrounding area when installing shopfitting fitments. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 22

23 Complete the work within the allocated time when installing shopfitting fitments. Comply with the given contract information to install shopfitting fitments to the required specification. 278 Installing shopfitting frames and finishings in the workplace Interpret the given information relating to the work and resources when installing shopfitting frames and finishings. Know how to comply with relevant legislation and official guidance when installing shopfitting frames and finishings. Maintain safe working practices when installing shopfitting frames and finishings. Select the required quantity and quality of resources for the methods of work to install shopfitting frames and finishings. Minimise the risk of damage to the work and surrounding area when installing shopfitting frames and finishings. Complete the work within the allocated time when installing shopfitting frames and finishings. Comply with the given contract information to install shopfitting frames and finishings to the required specification. 279 Installing shopfronts and finishings in the workplace Interpret the given information relating to the work and resources when installing shopfronts and finishings. Know how to comply with relevant legislation and official guidance when installing shopfronts and finishings. Maintain safe working practices when installing shopfronts and finishings. Select the required quantity and quality of resources for the methods of work to install shopfronts and finishings. Minimise the risk of damage to the work and surrounding area when installing shopfronts and finishings. 23 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

24 Complete the work within the allocated time when installing shopfronts and finishings. Comply with the given contract information to install shopfronts and finishings to the required specification. 301 Confirming the occupational method of work in the workplace Assess available project data accurately to determine the occupational method of work. Obtain additional information from alternative sources in cases where the available project data is insufficient. Identify work methods that will make best use of resources and meet project, statutory and contractual requirements. Confirm and communicate the selected work method to relevant personnel. 302 Confirming work activities and resources for an occupational work area in the workplace Identify work activities, assess required resources and plan the sequence of work. Obtain clarification and advice where the resources required are not available. Evaluate the work activities and the requirements of any significant external factors against the project requirements. Identify work activities which influence each other and make the best use of the resources available. Identify changed circumstances that require alterations to the work programme and justify them to decision makers. 305 Designing and fabricating structural timber connections in the workplace Interpret the given information relating to the work and resources when designing and fabricating structural timber connections. Know how to comply with relevant legislation and official guidance when designing and fabricating structural timber connections. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 24

25 Maintain safe working practices when designing and fabricating structural timber connections. Select the required quantity and quality of resources for the methods of work to design and fabricate structural timber connections. Minimise the risk of damage to the work and surrounding area when designing and fabricating structural timber connections. Complete the work within the allocated time when designing and fabricating structural timber connections. Comply with the given contract information to design and fabricate structural timber connections to the required specification. 344 Manufacturing bespoke architectural joinery products in the workplace Interpret the given information relating to the work and resources when manufacturing bespoke architectural joinery products. Know how to comply with relevant legislation and official guidance when manufacturing bespoke architectural joinery products. Maintain safe working practices when manufacturing bespoke architectural joinery products. Select the required quantity and quality of resources for the methods of work to manufacture bespoke architectural joinery products. Minimise the risk of damage to the work and surrounding area when manufacturing bespoke architectural joinery products. Complete the work within the allocated time when manufacturing bespoke architectural joinery products. Comply with the given contract information to manufacture bespoke architectural joinery products to the required specification. 25 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

26 346 Installing bespoke first fixing components in the workplace Interpret the given information relating to the work and resources when installing bespoke first fixing components. Know how to comply with relevant legislation and official guidance when installing bespoke first fixing components. Maintain safe working practices when installing bespoke first fixing components. Select the required quantity and quality of resources for the methods of work to install bespoke first fixing components. Minimise the risk of damage to the work and surrounding area when installing bespoke first fixing components. Complete the work within the allocated time when installing bespoke first fixing components. Comply with the given contract information to install bespoke first fixing components to the required specification. 347 Installing bespoke second fixing components in the workplace Interpret the given information relating to the work and resources when installing bespoke second fixing components. Know how to comply with relevant legislation and official guidance when installing bespoke second fixing components. Maintain safe working practices when installing bespoke second fixing components. Select the required quantity and quality of resources for the methods of work to install bespoke second fixing components. Minimise the risk of damage to the work and surrounding area when installing bespoke second fixing components. Complete the work within the allocated time when installing bespoke second fixing components. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 26

27 Comply with the given contract information and the required specification to install bespoke second fixing components. 325 Manufacturing bespoke shopfitting products in the workplace Interpret the given information relating to the work and resources when manufacturing bespoke shopfitting products. Know how to comply with relevant legislation and official guidance when manufacturing bespoke shopfitting products. Maintain safe working practices when manufacturing bespoke shopfitting products. Select the required quantity and quality of resources for the methods of work to manufacture bespoke shopfitting products. Minimise the risk of damage to the work and surrounding area when manufacturing bespoke shopfitting products. Complete the work within the allocated time when manufacturing bespoke shopfitting products. Comply with the given contract information to manufacture bespoke shopfitting products to the required specification. 326 Manufacturing bespoke wheelwrighting products in the workplace Interpret the given information relating to the work and resources when manufacturing bespoke wheelwrighting products. Know how to comply with relevant legislation and official guidance when manufacturing bespoke wheelwrighting products. Maintain safe working practices when manufacturing bespoke wheelwrighting products. Select the required quantity and quality of resources for the methods of work to manufacture bespoke wheelwrighting products. 27 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

28 Minimise the risk of damage to the work and surrounding area when manufacturing bespoke wheelwrighting products. Complete the work within the allocated time when manufacturing bespoke wheelwrighting products. Comply with the given contract information to manufacture bespoke wheelwrighting products to the required specification. 336 Setting up and using fixed machinery in the workplace Interpret the given information relating to the work and resources when setting up and using fixed machinery. Know how to comply with relevant legislation and official guidance when setting up and using fixed machinery. Maintain safe working practices when setting up and using fixed machinery. Carry out pre-start preparation inspections on power tools and equipment in accordance with approved procedures when setting up and using fixed machinery. Understand the required quantity and quality of resources for the methods of work to set up and use fixed machinery. Minimise the risk of damage to the work and surrounding area when setting up and using fixed machinery. Complete the work within the allocated time when setting up and using fixed machinery. 501 Developing and maintaining good occupational working relationships in the workplace Develop, maintain and encourage working relationships to promote good will and trust. Inform relevant people about work activities in an appropriate level of detail, with the appropriate level of urgency. Offer advice and help to relevant people about work activities and encourage questions/requests for clarification and comments. Clarify proposals with relevant people and discuss alternative suggestions. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 28

29 Resolve differences of opinion in ways that minimise offence and maintain goodwill, trust and respect. 603 Manufacturing routine wheel righting products in the workplace Interpret the given information relating to the work and resources when manufacturing routine wheelwrighting products. Know how to comply with relevant legislation and official guidance when manufacturing routine wheelwrighting products. Maintain safe working practices when manufacturing routine wheelwrighting products. Select the required quantity and quality of resources for the methods of work to manufacture routine wheelwrighting products. Minimise the risk of damage to the work and surrounding area when manufacturing routine wheelwrighting products. Complete the work within the allocated time when manufacturing routine wheelwrighting products. Comply with the given contract information to manufacture routine wheelwrighting products to the required specification. 605 Marking out from setting out details for routine shopfitting products in the workplace Interpret the given information relating to the work and resources when marking out from setting out details for routine shopfitting products. Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine shopfitting products. Maintain safe working practices when marking out from setting out details for routine shopfitting products. Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine shopfitting products. 29 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

30 Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine shopfitting products. Complete the work within the allocated time when marking out from setting out details for routine shopfitting products. Comply with the given contract information to mark out from setting out details for routine shopfitting products to the required specification. 606 Marking out from setting out details for routine wheelwrighting products in the workplace Interpret the given information relating to the work and resources when marking out from setting out details for routine wheelwrighting products. Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine wheelwrighting products. Maintain safe working practices when marking out from setting out details for routine wheelwrighting products. Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine wheelwrighting products. Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine wheelwrighting products. Complete the work within the allocated time when marking out from setting out details for routine wheelwrighting products. Comply with the given contract information to mark out from setting out details for routine wheelwrighting products to the required specification. 614 Marking out from setting out details for routine architectural joinery products in the workplace Interpret the given information relating to the work and resources when marking out from setting out details for routine architectural joinery products. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 30

31 Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine architectural joinery products Maintain safe working practices when marking out from setting out details for routine architectural joinery products Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine architectural joinery products Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine architectural joinery products. Complete the work within the allocated time when marking out from setting out details for routine architectural joinery products Comply with the given contract information to mark out from setting out details for routine architectural joinery products to the required specification 651 Manufacturing routine architectural joinery products in the workplace Interpret the given information relating to the work and resources when manufacturing routine architectural joinery products. Know how to comply with relevant legislation and official guidance when manufacturing routine architectural joinery products. Maintain safe working practices when manufacturing routine architectural joinery products. Select the required quantity and quality of resources for the methods of work to manufacture routine architectural joinery products. Minimise the risk of damage to the work and surrounding area when manufacturing routine architectural joinery products. Complete the work within the allocated time when manufacturing routine architectural joinery products. 31 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

32 Comply with the given contract information to manufacture routine architectural joinery products to the required specification. 652 Manufacturing routine shopfitting products in the workplace. Interpret the given information relating to the work and resources when manufacturing routine shopfitting products. Know how to comply with relevant legislation and official guidance when manufacturing routine shopfitting products. Maintain safe working practices when manufacturing routine shopfitting products. Select the required quantity and quality of resources for the methods of work to manufacture routine shopfitting products. Minimise the risk of damage to the work and surrounding area when manufacturing routine shopfitting products. Complete the work within the allocated time when manufacturing routine shopfitting products. Comply with the given contract information to manufacture routine shopfitting products to the required specification. 714 Setting up and using transportable cutting and shaping machines in the workplace Interpret the given information relating to the work and resources when setting up and using transportable cutting and shaping machines. Know how to comply with relevant legislation and official guidance when setting up and using transportable cutting and shaping machines. Maintain safe working practices when setting up and using transportable cutting and shaping machines. Select the required quantity and quality of resources for the methods of work to set up and use transportable cutting and shaping machines. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 32

33 Minimise the risk of damage to the work and surrounding area when setting up and using transportable cutting and shaping machines. Complete the work within the allocated time when setting up and using transportable cutting and shaping machines. Comply with the given contract information to set up and use transportable cutting and shaping machines to the required specification. 727 Producing setting out details for routine architectural joinery products in the workplace. Interpret the given information relating to the work and resources when producing setting out details for routine architectural joinery products. Know how to comply with relevant legislation and official guidance when producing setting out details for routine architectural joinery products. Maintain safe working practices when producing setting out details for routine architectural joinery products. Select the required quantity and quality of resources for the methods of work to produce setting out details for routine architectural joinery products. Minimise the risk of damage to the work and surrounding area when producing setting out details for routine architectural joinery products. Complete the work within the allocated time when producing setting out details for routine architectural joinery products Comply with the given contract information to produce setting out details for routine architectural joinery products to the required specification 718 Producing setting out details for routine shopfitting products in the workplace Interpret the given information relating to the work and resources when producing setting out details for routine shopfitting products. 33 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

34 Know how to comply with relevant legislation and official guidance when producing setting out details for routine shopfitting products. Maintain safe working practices when producing setting out details for routine shopfitting products. Select the required quantity and quality of resources for the methods of work to produce setting out details for routine shopfitting products. Minimise the risk of damage to the work and surrounding area when producing setting out details for routine shopfitting products. Complete the work within the allocated time when producing setting out details for routine shopfitting products. Comply with the given contract information to produce setting out details for routine shopfitting products to the required specification. 719 Producing setting out details for routine wheelwrighting products in the workplace Interpret the given information relating to the work and resources when producing setting out details for routine wheelwrighting products. Know how to comply with relevant legislation and official guidance when producing setting out details for routine wheelwrighting products. Maintain safe working practices when producing setting out details for routine wheelwrighting products. Select the required quantity and quality of resources for the methods of work to produce setting out details for routine wheelwrighting products. Minimise the risk of damage to the work and surrounding area when producing setting out details for routine wheelwrighting products. Complete the work within the allocated time when producing setting out details for routine wheelwrighting products. Comply with the given contract information to produce setting out details for routine wheelwrighting products to the required specification. City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 34

35 5.5 Tracking Document To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Site Carpentry ( ), you must achieve 146 credits in total; 100 credits must be achieved from the mandatory units and a minimum of 46 credits from the optional units available. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Confirming the occupational method of work in the workplace Confirming work activities and resources for an occupational work area in the workplace Installing bespoke first fixing components in the workplace Installing bespoke second fixing components in the workplace Developing and maintaining good occupational working relationships in the workplace Setting up and using transportable cutting and shaping machines in the workplace Optional units Erecting structural carcassing components in the workplace Erecting complex roof structure carcassing components in the workplace Maintaining nonstructural or structural components in the workplace Credits Unit achieved Yes/No Date 35 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

36 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Architectural Joinery ( ), you must achieve 121 credits in total; 101 credits must be achieved from the mandatory units and a minimum of 20 credits from the optional units available. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Confirming the occupational method of work in the workplace Confirming work activities and resources for an occupational work area in the workplace Manufacturing bespoke architectural joinery products in the workplace Developing and maintaining good occupational working relationships in the workplace Marking out from setting out details for routine architectural joinery products in the workplace Manufacturing routine architectural joinery products in the workplace Producing setting out details for routine architectural joinery products in the workplace Optional units Producing CAD setting out details in the workplace Producing setting out details for bespoke architectural joinery products in the workplace Setting up and using fixed machinery in the workplace Credits Unit achieved Yes/No Date City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 36

37 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Wheelwrighting ( ), you must achieve 130 credits in total; 110 credits must be achieved from the mandatory units and a minimum of 20 credits from the optional units available. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Confirming the occupational method of work in the workplace Confirming work activities and resources for an occupational work area in the workplace Manufacturing bespoke wheelwrighting products in the workplace Developing and maintaining good occupational working relationships in the workplace Manufacturing routine wheelwrighting products in the workplace Marking out from setting out details for routine wheelwrighting products in the workplace Producing setting out details for routine wheelwrighting products in the workplace Optional units Producing setting out details for bespoke wheelwrighting products in the workplace Setting up and using fixed machinery in the workplace Credits Unit achieved Yes/No Date 37 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

38 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Shopfitting Site Work ( ), you must achieve a total of 104 credits from the mandatory units. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Installing shopfitting fitments in the workplace Installing shopfitting frames and finishings in the workplace Installing shopfronts and finishings in the workplace Confirming the occupational method of work in the workplace Setting up and using fixed machinery in the workplace Developing and maintaining good occupational working relationships in the workplace Credits Unit achieved Yes/No Date City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 38

39 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Shopfitting Bench Work ( ), you must achieve 121 credits in total; 101 credits must be achieved from the mandatory units and a minimum of 20 credits from the optional units available. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Confirming the occupational method of work in the workplace Confirming work activities and resources for an occupational work area in the workplace Manufacturing bespoke shopfitting products in the workplace Developing and maintaining good occupational working relationships in the workplace Marking out from setting out details for routine shopfitting products in the workplace Manufacturing routine shopfitting products in the workplace Producing setting out details for routine shopfitting products in the workplace Optional units Producing CAD setting out details in the workplace Producing setting out details for bespoke shopfitting products in the workplace Setting up and using fixed machinery in the workplace Producing wood and woodbased products using Computer Numerically Controlled/Numerically Controlled (CNC/NC) machinery in the workplace Credits Unit achieved Yes/No Date 39 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

40 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Structural Post and Beam Carpentry ( ), you must achieve 96 credits in total; 66 credits must be achieved from the mandatory units and a minimum of 30 credits from the optional units available. City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Confirming the occupational method of work in the workplace Confirming work activities and resources for an occupational work area in the workplace Designing and fabricating structural timber connections in the workplace Developing and maintaining good occupational working relationships in the workplace Optional units Conserving or restoring heavy timber framework in the workplace Fabricating post and beam components in the workplace Producing CAD setting out details in the workplace Producing wood and wood-based products using Computer Numerically Controlled/Numerically Controlled (CNC/NC) machinery in the workplace Credits Unit achieved Yes/No Date City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 40

41 To achieve the Level 3 NVQ Diploma in Wood Occupations (Construction) Timber Frame Erection ( ), learners must achieve 121 credits in total. Unit no. UAN Unit level Unit title Credit value GLH Mandatory units 715 R/506/ Slinging and signalling the movement of loads (secondary role) in the workplace City & Guilds unit no. Unit level Mandatory units Unit title Conforming to general health, safety and welfare in the workplace Erecting timber roof structures in the workplace Erecting timber walls and floors in the workplace Confirming the occupational method of work in the workplace Confirming work activities and resources for an occupational work area in the workplace Erecting complex roof structure carcassing components in the workplace Co-ordinating and confirming the dimensional control requirements of the work in the workplace Developing and maintaining good occupational working relationships in the workplace Slinging and signalling the movement of loads suspended loads in the workplace Credits Unit achieved Yes/No Date 41 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

42 5.6 On site assessment plan/feedback Portfolio evidence reference: Candidate name: Date: Candidate prepared for assessment Yes / No Candidate requires support Yes / No Candidate briefed on appeals procedure Yes / No Support required Yes / No Assessment location/address and postcode: Type of work to be carried out: Assessor feedback: (Use Assessor continuation sheet if required) Forward Planning: Candidate signature: Date: Assessor name: Assessor signature: Date: IQA name: IQA signature: Date: City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 42

43 5.7 On site observation report Portfolio evidence reference: Candidate name: Date: Candidate prepared for assessment Yes / No Candidate requires support Yes / No Candidate briefed on appeals procedure Yes / No Support required Yes / No Assessment location/address and postcode: Learning outcome reference Assessor observation: (Use Assessor continuation sheet if required) Candidate signature: Date: Assessor name: Assessor signature: Date: IQA name: IQA signature: Date: 43 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

44 5.8 Professional discussion supplementary evidence sheet Unit number: Candidate name: Portfolio evidence reference: Date: Completed by: (please tick) Candidate: Work-based Recorder Witness Learning outcome reference Written evidence: Reading taken (eg flow rates, pressure, temperature): Candidate signature: Assessor/Work-Based Recorder name: Assessor/Work-Based Recorder signature: Date: Date: Date: IQA name: IQA signature: Date: City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 44

45 5.9 Oral questioning supplementary evidence sheet Unit number: Candidate name: Portfolio evidence reference: Date: Assessor question: Candidate answer: Assessor feedback: Candidate signature: Date: Assessor name: Assessor signature: Date: IQA name: IQA signature: Date: 45 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

46 5.10 Photographic supplementary evidence Unit number: Candidate name: Portfolio evidence reference: Date: Brief description of task being carried out in the photograph (to be completed by the candidate): (Attach photo in this box) Where the photograph was taken: Candidate signature: Date: Assessor name: Assessor signature: Date: IQA name: IQA signature: Date: City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 46

47 5.11 Work-based recorder/expert witness details If a work-based recorder/expert witness is to be used to confirm your competence in the workplace (system to be agreed by assessor) then to meet the requirements of the construction industry qualification assessment strategy (as agreed by the key industry bodies) he/she must be occupationally competent, endorsed by the employer the IQA or the assessor. The designated work-based recorder should ordinarily be your immediate work supervisor. It is recognised that over the lifetime of the qualification you may be allocated more than one work-based recorder. The requirements detailed below therefore must be completed by each work-based recorder allocated to you. I confirm I am suitably experienced or qualified in line with the industry requirements for workbased recorders detailed above. I acknowledge that I will only counter sign documentation requested by the candidate where to my knowledge only the candidate has completed the work and on the understanding that the work has been carried out to a commercially acceptable standard. Work-Based Recorder name: Work-Based Recorder signature: Date: I confirm that I am suitably experienced or qualified in line with the industry requirements for work-based recorders detailed above. I acknowledge that I will only counter sign documentation requested by the candidate where to my knowledge only the candidate has completed the work and on the understanding that the work has been carried out to a commercially acceptable standard. Work-Based Recorder name: Work-Based Recorder signature: Date: I confirm that I am suitably experienced or qualified in line with the industry requirements for work-based recorders detailed above. I acknowledge that I will only counter sign documentation requested by the candidate where to my knowledge only the candidate has completed the work and on the understanding that the work has been carried out to a commercially acceptable standard. Work-Based Recorder name: Work-Based Recorder signature: Date: 47 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)

48 5.12 Assessor continuation sheet On site assessment plan/feedback On site observation Portfolio evidence reference: Candidate name: Date: Candidate signature: Date: Assessor name: Assessor signature: Date: IQA name: IQA signature: Date: City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) 48

49 5.13 Signature Sheet Candidate name: Date: Anyone who witnesses and signs a piece of the candidate s evidence must provide a specimen signature in the table below Witnesses relationship to candidate eg supervisor, customer, lecturer, assessor Name Signature Date 49 City & Guilds Level 3 NVQ Diploma in Wood Occupations (Construction) (6571)