MOBILE CRANE OPERATOR
|
|
- Christopher Harrison
- 6 years ago
- Views:
Transcription
1 To qualify to challenge certification in this trade, you must: Have experience performing job tasks listed as per Section D; and Have worked a minimum of 5,400 documented hours of which 1,600 hours must be operating time This form is used to declare work experience for periods of employment. The information provided is used to verify the applicant s work experience in this trade. This form must be completed by a direct supervisor of the applicant who will be contacted by BC Crane Safety or ITA. te: An Employer of Work Experience form must be completed by each Employer listed on the applicant s completed application form. A Statutory of Work Experience form must be completed for periods during which the applicant was selfemployed or a previous employer is unavailable to complete an Employer. For more information, see Instructions for Certification Challenge. Once your challenge application is approved, you must first pass the ITA Level 1 Standardized Written Examination. You will then be approved to attempt the ITA Level 3 Standardized Written Examination and the Mobile Crane Operator Interprovincial Red Seal Examination. Once all three written examinations are passed, you will be required to pass the ITA Standardized Practical Assessment. For more information on fees and scheduling of the written exam, refer to the Instructions for Certification Challenge. A. Applicant Name Enter the name of the individual for whom this form is being completed. Legal First Name: Legal Middle Name(s): Legal Last Name: B. Supervisor Contact Information Enter the name and contact information for the person who directly supervised the applicant at this employer. Ensure the information given is current as the application will be denied if this person cannot be contacted by ITA. Name of Organization/Employer/Business: First and Last Name of Applicant s Direct Supervisor: Supervisor Position or Title: Suite Number: Street Number and Name: City: Province: Postal Code: Business Number: ( ) Mobile Phone Number: ( ) Supervisor Address: Page 1 of 6 The Industry Training Authority is an agency of the Government of British Columbia. June 2017
2 C. Employment Information of Applicant Dates of Employment (MM/DD/YYYY): From: To: Total number of hours of Mobile Crane Operator experience accumulated in that period: Company: Location: Total number of hours of Mobile Crane Operator operating time (actual operation of the crane) accumulated in that period: Job Title of Applicant: Page 2 of 6 The Industry Training Authority is an agency of the Government of British Columbia. June 2017
3 D. Supervisor of Job Task Performance By checking or in the column, indicate whether or not you, as the direct supervisor of the applicant, have personally witnessed the applicant performing the job tasks listed. Job Tasks D1 must check to a minimum 25 of 35 job tasks in this section SAFETY Comply with regulations, policies, and manufacturers manuals Maintain a safe working environment Follow emergency procedures Be aware of power line hazards Practice effective worksite communications CRANE SYSTEMS AND COMPONENTS Inspect carrier systems, outrigger systems, and turntable assemblies Inspect power plants and drive systems Inspect pneumatic systems, hydraulic systems, and electrical systems Inspect steering systems and braking systems Inspect hoisting systems and attachments Inspect safety components, devices, and aids WIRE ROPE AND RIGGING Use wire rope Follow wire rope installation procedures Inspect wire rope, slings, and rigging hardware Use slings and rigging hardware Use rigging techniques Maintain and store wire rope, slings, and rigging hardware Page 3 of 6 The Industry Training Authority is an agency of the Government of British Columbia. June 2017
4 Job Tasks D1 (continued) must check to a minimum 25 of 35 job tasks in this section CRANE OPERATIONS Interpret operating manuals Perform a pre-operational inspection Perform a pre-operational setup Demonstrate hoisting techniques Leave a crane unattended according to proper procedures TRANSPORTING A CRANE Follow commercial transport regulations Prepare a crane for travel Prepare a crane for transport Assemble and disassemble a crane CRANE MAINTENANCE Use tools for basic crane maintenance Perform basic crane maintenance SPECIALIZED OPERATIONS Operate a crane with a suspended work platform Perform engineered lifts Perform heavy lifts Perform dragline and clamshell operations Perform foundation and shoring operations Perform multiple crane lifts Lift an object into or out of water Page 4 of 6 The Industry Training Authority is an agency of the Government of British Columbia. June 2017
5 Job Tasks D2 must check to all job tasks in this section LIFT PLANNING Follow site assessment procedures Determine load weights Determine crane lifting capacity Determine rigging requirements Conduct a site assessment Use a crane capacity chart Job Tasks D3 must check to a minimum 2 of 6 job tasks in this section TELESCOPING BOOM CRANE OPERATIONS Perform hoisting techniques for a telescoping boom crane Operate a telescoping boom crane, over 20 tonnes, with a slewing upper structure LATTICE BOOM HYDRAULIC CRANE OPERATIONS Perform hoisting techniques for a lattice boom hydraulic crane Operate a lattice boom hydraulic crane LATTICE BOOM FRICTION CRANE OPERATIONS Perform hoisting techniques for a lattice boom friction crane Operate a lattice boom friction crane Page 5 of 6 The Industry Training Authority is an agency of the Government of British Columbia. June 2017
6 E. Confirmation of Prerequisite Credentials or Certificates For some trades, evidence that the applicant has earned prerequisite credentials or certificates is required before the individual is permitted to challenge certification. For those trades, a current or previous employer must verify that the applicant has the required prerequisite credentials. There are no prerequisite credentials or certificates for this trade. F. Supervisor Signature I certify that the information I, as the current or former direct supervisor of the applicant, have provided is accurate. (te: Collection and protection of personal information on this form is in accordance with the provisions of the Freedom of Information and Protection of Privacy Act.) Supervisor name (Please Print): Supervisor Signature: Date Signed: (MM/DD/YYYY) Page 6 of 6 The Industry Training Authority is an agency of the Government of British Columbia. June 2017
CANDIDATE HANDBOOK. Boom Truck Operator
CANDIDATE HANDBOOK Boom Truck Operator Stiff Boom Unlimited Tonnage Stiff Boom 40 Tonnes and Under Stiff Boom 20 Tonnes and Under Folding Boom Unlimited Tonnage Folding Boom 22 Tonnes and Under Folding
More informationTRANSPORT TRAILER TECHNICIAN
To qualify to challenge certification in this trade or be granted authority to supervise and sign-off on apprentices in this trade, individuals must have: worked a minimum of 4,500 hours performing the
More informationHYDRAULIC MOBILE CRANE
VERSION 2.0 British Columbia CraneSafe Certification HYDRAULIC MOBILE CRANE unlimited tonnage Core Workplace Competencies Practical Experience Requirements Industry Skills & Knowledge Standards Based on
More informationINSTRUCTIONS. CERTIFICATION CHALLENGE or SUPERVISION AND SIGN-OFF AUTHORITY. Who Can Apply?
Who Can Apply? Applying to Challenge Certification If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Your application
More informationINSTRUCTIONS CERTIFICATION CHALLENGE. Who Can Apply?
Who Can Apply? Applying to Challenge Certification If you have significant work experience in a trade but have never been certified in Canada, you may apply to challenge the certification. Your application
More informationCrane Certification FAQs
Crane Certification FAQs The following are common FAQs explaining what you need to know in order to be in compliance with the new OSHA crane certification requirement. General Questions What is the new
More informationSTIFF BOOM TRUCK CRANE
VERSION 2.0 British Columbia CraneSafe Certification STIFF BOOM TRUCK CRANE UNlimitEd tonnage Core Workplace Competencies Practical Experience Requirements Industry Skills & Knowledge Standards Based on
More informationAPPRENTICE IDENTIFICATION
1 LOGBOOK SIGNOFF An individual holding one of the following credentials qualifies as a Workplace Assessor and may sign off on the Workplace Competencies in this Logbook: Registered Industrial Electrician
More informationCrane Facts. Associated Training Services, Corp.
Associated Training Services, Corp. Crane Facts 2 The exact number of cranes being operated within the United States is unknown The best estimates put the number of mobile and tower cranes used in construction
More informationPresentation Handouts
Presentation Handouts Crane Operator Certification: Impact of the California Rule AGC SAFETY AND HEALTH COUNCIL West Sacramento, California March 7, 2012 Bob Hornauer, Manager California Affairs, NCCCO
More informationHYDRAULIC MOBILE CRANE
VERSION 2.0 British Columbia CraneSafe Certification HYDRAULIC MOBILE CRANE 80 tonnes and under Core Workplace Competencies Practical Experience Requirements Industry Skills & Knowledge Standards Based
More informationLoad Handling (Hoisting) Policy
1.0 PURPOSE This policy is to promote safe load handling (hoisting) practices and reduce the frequency and severity of incidents. The purpose is to protect personnel from injury, the environment from harm,
More informationApprenticeship and Industry Training
Apprenticeship and Industry Training Crane and Hoisting Equipment Operator Wellhead Boom Truck Apprenticeship Course Outline 0344.4 (2006) ALBERTA ADVANCED EDUCATION CATALOGUING IN PUBLICATION DATA Alberta.
More informationLoad Handling (Hoisting) Policy
1.0 PURPOSE This policy is to promote safe load handling (hoisting) practices and reduce the frequency and severity of incidents. The purpose is to protect personnel from injury, the environment from harm,
More informationContents. Technical Test Learning. Crawler Crane Tower Crane
Technical Test Learning Contents A02 A04 A05 A06 A09 A10 A12 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A30 A31 A32 A33 A34 A35 A36 A37 A39 A40 Crawler Crane Tower Crane Dragline Concrete
More informationScaffolding Procedures
Procedures Purpose It is the purpose of this company in issuing these procedures to further ensure a safe workplace based on the following formal, written procedures for scaffold work. Application This
More informationCranes and Derricks Standard Summary. April, 2010
Cranes and Derricks Standard Summary April, 2010 New Crane Regulations Federal OSHA proposed Crane and Derrick Standard in October, 2008. Expected final Federal regulation: June 2010?? In effect now in
More informationBOLOGNAFIERE spa - fax
FORM 0 NON-STANDARD SET-UP MANDATORY FORM FOR NON-STANDARD SET-UPS This service request form must be sent to: BOLOGNAFIERE spa - fax +39 051 6374 024 Authorisation request A set-up is considered non-standard
More informationCopies of the written program may be obtained at Where are copies of this written plan kept? (Insert building/room, etc.).
Scaffolding Safety Procedures for Construction Purpose It is this company's purpose in issuing these procedures to further ensure a safe workplace based on the following formal, written procedures for
More informationITI A WORLD CLASS LEADER IN CRANE and RIGGING TRAINING
ITI A WORLD CLASS LEADER IN CRANE and RIGGING TRAINING CRANES RIGGING INSPECTION LIFT PLANNING CERTIFICATION 800.727.655 iti.com Industrial Training International, Inc. 9428 Old Pacific Highway Woodland
More informationTHE NEW CRANE STANDARD
THE NEW CRANE STANDARD By Molly O Brien FDRsafety December 2012 Summary While cranes and derricks do make the movement of heavy materials much easier for workers, many safety hazards are associated with
More informationPeter Juhren Corporate Service Manager Morrow Equipment Co. L.L.C. Salem, OR USA. What s New in Tower Crane Standards?
Peter Juhren Corporate Service Manager Morrow Equipment Co. L.L.C. Salem, OR USA What s New in Tower Crane Standards? The opinions expressed in this presentation are those of the presenter, Peter Juhren,
More informationMobile Lifting Equipment Operation and Maintenance
An Intensive 5 Day Training Course Mobile Lifting Equipment Operation and Maintenance 02-JUL-17 26-30 Nov 2017, Dubai www.petroknowledge.com Mobile Lifting Equipment Operation and Maintenance Why Chse
More informationFUNDAMENTALS OF THE PETROLEUM INDUSTRY CERTIFICATION
FUNDAMENTALS OF THE PETROLEUM INDUSTRY CERTIFICATION CORPORATE COLLEGE SEMINAR SERIES Date: November 1 December 15 In partnership with: For more information, contact: Michael Burns Director Michael.Burns@LoneStar.edu
More informationCranes & Derricks in Construction. AIHA/ASSE September 17, 2010
1 Cranes & Derricks in Construction 29 CFR 1926 Subpart CC OSHA Update OSHA Update AIHA/ASSE September 17, 2010 Cranes and Derricks in Construction 29 CFR 1926 Subpart CC Effective Date - November 8, 2010
More informationPART 22 POWERED MOBILE EQUIPMENT GENERAL. Application 22.1 This Part applies to every workplace where powered mobile equipment is used.
Manitoba Lift Truck - Chariot de levage industriel This material has been extracted from the Acts and Regulations of the Province to help students understand the subject. It is not an official source of
More informationLevel 2 NVQ Certificate and Diploma in Plant Operations (Construction) (6561)
QUALIFICATION LOGBOOK Level 2 NVQ Certificate and Diploma in Plant Operations (Construction) (6561) June 2015 Version 3.1 Candidate Logbook / Work-Based Evidence Record Mandatory units Level 2 NVQ Certificate
More informationWHAT IS LOAD MOMENT? SKYAZÚL RESOURCES LOAD MOMENT
LOAD MOMENT Safe Load Indicating Systems for mobile cranes have been in existence for over 50 years. Over the past 20 years as technology has progressed, devices capable of measuring load moment have become
More informationOCCUPATIONAL HEALTH AND SAFETY ACT SCAFFOLDING REGULATIONS
c t OCCUPATIONAL HEALTH AND SAFETY ACT SCAFFOLDING REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to October 28,
More informationMobile Crane Lift Planning in Construction Environments
Guest Speaker: Kevin O'Neill, P.E. Project Engineer, Sieffert Associates Host: Mike Parnell President / CEO, ITI ASME B30 Vice Chair (Cranes & Rigging) ASME P30 Chair (Lift Planning) The views expressed
More informationLifting Appliances of Ships and Offshore Installations
CCS Rule Change Notice For: Lifting Appliances of Ships and Offshore Installations Version: May, 2016. RCN No.1 Effective date: 19 May, 2016 Beijing CONTENTS Chapter 3 CRANES, LIFTS, RAMPS AND SELF-LOADING
More informationLEARNER GUIDE. Telescopic Materials Handler (TMH) PO Box 2026 Mountain Gate VIC 3156 p: ABN: RTO: 21396
LEARNER GUIDE Telescopic Materials Handler (TMH) PO Box 2026 Mountain Gate VIC 3156 p: 03 9763 5449 ABN: 37 106 951 900 RTO: 21396 ASSESSOR GUIDELINES GENERAL 1. Introduction 1.1 Scope These general guidelines
More informationTGL Fabrication Co.,Ltd. A growing Company with a growing reputation. Horizontal Load Testing & Inspection Services.
Horizontal Load Testing & Inspection Services. TGL Fabrications Co; Ltd Inspection Services provides comprehensive inspection of all hoisting and lifting gear onshore & offshore; the equipment is inspected
More informationScheduled Operating Authority Application for a Regional Public Transit Service Provider
Scheduled Operating Authority Application for a Regional Public Transit Service Provider Regional Public Transit Service: An extension of a municipal transit service outside of its municipal boundaries,
More informationTransitioning to the New Erector Standard from a Checklist
Transitioning to the New Erector Standard from a Checklist With the release of the Standard, what does that mean for the industry and you? AISC Certification will be introducing an updated Erector Certification
More informationCommunication Annotated Instructor s Guide. Module MODULE OVERVIEW PREREQUISITES OBJECTIVES PERFORMANCE TASKS MATERIALS AND EQUIPMENT LIST
Communication Annotated Instructor s Guide Module 21201-04 MODULE OVERVIEW The ability to communicate effectively is essential to the safe operation of a crane. This module covers the fundamentals of the
More informationDRIVER APPLICATION FOR
DRIVER APPLICATION FOR 2630 S Jefferson Mt. Pleasant, TX 75455 Phones: (903) 572 1741 * 1-800-527-8616 Fax: 903-572-2798 * 1-888-527-8616 We are an Equal Opportunity Employer In compliance with Federal
More informationSkills Passport. Work Starts with Safety. Passport #TAS1-16
Skills Passport Work Starts with Safety Passport #1-16 Must Do s: 1. Have you completed the relevant site and/or company induction and are the site specific policies and procedures understood? 2. Are the
More informationScaffolding Safety. Scaffolding
Scaffolding Safety Scaffolding 1926.450 - Scope, Application Covers all scaffolds used in workplaces Does not apply to crane or derrick suspended personnel platforms, which are covered by 1926.550(g) Aerial
More informationCRANES & MOBILE LIFTING EQUIPMENT
CRANES & MOBILE LIFTING EQUIPMENT Contents Company Policy and Procedure... 1 Mobile Crane Operations and Inspections... 2 Introduction... 2 Safety Training Requirements... 3 Lifting Principles... 5 Operational
More informationElectrical Program. Program Overview Manual. Document Number: MAN Date: December 21, 2006
g Electrical Program Document Number: Date: December 21, 2006 Table of Contents Introduction...1 Services...3 Safety Manager...3 Senior Safety Officer...3 Safety Officers...4 Certificates of Qualification
More informationFACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision 1. Intent This program has been developed to reduce the risk of physical injury or property
More informationProgram Description MECHATRONIC SYSTEMS TECHNICIAN ACADEMY
Program Description MECHATRONIC SYSTEMS TECHNICIAN ACADEMY 7107 Elm Valley Drive Kalamazoo, MI 49009 Phone: 269.353.1282 Fax: 269.353.1580 careeracademies@kvcc.edu www.kvcc.edu/training MECHATRONIC SYSTEMS
More informationSHORT COURSES. Industry Training New Zealand
SHORT COURSES Industry Training New Zealand 2 CONTENTS About Tai Poutini Polytechnic About Training for Industry Short Courses Cranes Truck Mounted Crane Pendant Crane Lifting Loads Telehandler Scaffolding
More informationGuide to Documentation and Marking Part 6 General Accessories and Components for Slings
Guide to Documentation and Marking Part 6 General Accessories and Components for Slings Document reference LEEA 059-6 version 2 dated 23.02.15 Introduction. This guide is aimed at manufacturers, distributors
More informationPAGE 1 OF 10 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S370 Mobile Cranes Procedure REV /14/2012
PAGE 1 OF 10 PURPOSE: MOBILE CRANES PROCEDURE To establish a procedure that provides guidelines that constitute safe operation of mobile cranes. It is not all encompassing or intended to replace common
More informationUniversal-Fit LIFT HOOK - Model 1371B
4101 GARLAND DR, FORT WORTH, TX 76117 Ph 817-485-6073 Fax 817-428-6008 www.starindustries.com Bulletin LH- OM0510B Universal-Fit LIFT HOOK - Model 1371B Installation, Use & Safety Precautions SPECIFICATIONS:
More informationLift Planning Workshop
Lift Planning Workshop Using the ASME P30.1 Planning for Load Handling Activities Volume March 9, 2017 Las Vegas, NV Presented by the ASME P30.1 Committee Workshop Assignment, Narrative, Compressor and
More informationPRACTICAL EXPERIENCE CERTIFICATE FOR INTERNATIONALLY TRAINED CANDIDATES
PRACTICAL EXPERIENCE CERTIFICATE FOR INTERNATIONALLY TRAINED CANDIDATES Please read the following information prior to completing the experience certification form as an applicant applying for admission
More informationIndustry Training New Zealand SCAFFOLDING AND RIGGING
Industry Training New Zealand SCAFFOLDING AND RIGGING 2 CONTENTS About Tai Poutini Polytechnic 2 Programmes Scaffolding National Certificate in Scaffolding (Elementary) 4 National Certificate in Scaffolding
More information3. VERIFICATION OF ITEMS SUBMITTED: All documentation submitted will be verified.
Name of Applicant (please print) Date of Application INSTRUCTIONS FOR COMPLETING APPLICATION 1. APPLICATION APPROVAL: Please allow four to eight weeks for processing your application from the date of receipt
More informationSAUDI ARAMCO Policy: HSE 008 DRILLING & WORKOVER OPERATIONS Issued: 4/27/2006 HSE PROCEDURE Revised : 4/27/2006
1.0 PURPOSE This procedure illustrates and specifies the sequence, methods, procedures and responsibilities for performing Rig Moves in all Saudi Aramco on-shore rigs. 2.0 SCOPE All SAR & Contractor Rigs
More informationACCREDITATION OF FITTING MANUFACTURERS
ACCREDITATION OF FITTING MANUFACTURERS TSSA GUIDE FOR REVIEW TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division 3300 Bloor Street West 14th Floor, Centre Tower
More informationIntroduction. Human Error. Root cause of 90% of construction accidents. The focus of efforts to learn from past mistakes.
Introduction Crane Safety Basics Welcome to this training session on Crane and Derrick Safety. This course is designed to provide basic information regarding the selection, set-up, inspection, and use
More informationStandards Summary Sheet
Standards Summary Sheet CSA Standard B167-2008 (R2015) Overhead Travelling Cranes Design, Inspection, Testing, Maintenance and Safe Operation Scope and Application This standard specifies the minimum requirements
More informationScaffolding Glossary of Terms A
Scaffolding Glossary of Terms A ACCESS PLATFORM: A platform that gives access to and from places of work to persons, materials and equipment. ACCESSORY: A fitting that is able to be attached to a structural
More informationExhibition / Event:... Hall / Standnr. :...
exhibitors / standbuilders Request Form Exhibition / Event:.. Hall / Standnr. :... Requests, complete with detailed plans preferably in DWG or PDF (see page 2 of this order form) of stand position, suspension
More informationSubcontractor Project Management Plan
Subcontractor Project Management Plan FOR LAYTON PROJECT: COMPANY: CONTACT NAME: ACTIVITY: Signed Date Written by: Reviewed by: Accepted by: Issue Date Description of Revisions Change Introduced by Change
More informationBHARAT HEAVY ELECTRICAL LIMITED, JHANSI Specification No.
NOTE : SCOPE : BHARAT HEAVY ELECTRICAL LIMITED, JHANSI Specification No. CRJ/9577 Item No. SP/CRJ/9577/1 & SP/CRJ/9577/2 Location NEW M.G.HOUSE Quantity 2 NOS. DESIGN, MANUFACTURING, SUPPLY, ERECTION &
More informationISPM NO. 15 REGISTRATIONS
ISPM NO. 15 REGISTRATIONS Application for registration of manufacturers and treatment providers for solid wood packaging material intended for export. The completed application form must be couriered (not
More informationBRC Food Safety Management System Implementation Workbook
We have written this workbook to assist in the implementation of your BRC food safety management system. The workbook is divided into 8 steps that are designed to assist you in implementing your food safety
More informationCourse ebook. Mobile Crane Operator
Course ebook Mobile Crane Operator Table of Contents About ITI... 3-7 Introduction......... 8 Purpose and Scope Program Objectives Course Outline......... 9 About the Course.........10 Who Should Attend
More informationApprenticeship and Industry Training
Apprenticeship and Industry Training Crane and Hoisting Equipment Operator Boom Truck Operator Apprenticeship Course Outline 34-3.3 (2005) ALBERTA ADVANCED EDUCATION AND TECHNOLOGY CATALOGUING IN PUBLICATION
More informationNZQA unit standard version 5 Page 1 of 5. Attach, lift, move, and place loads using mobile plant
Page 1 of 5 Title Attach, lift, move, and place loads using mobile plant Level 3 Credits 10 Purpose People credited with this unit standard are able, using mobile plant, to: prepare for a lift; select
More informationDEVELOPMENT SERVICES PO Box 1110 Tampa, FL Date: May 12, Interested Parties. John L. Barrios, CBO, Building Official
DEVELOPMENT SERVICES PO Box 1110 Tampa, FL 33601-1110 DEVELOPMENT SERVICES DEPARTMENT Date: May 12, 2017 To: From: SUBJECT: Interested Parties John L. Barrios, CBO, Building Official THRESHOLD BUILDINGS
More informationCITY OF REDLANDS SENIOR MECHANIC
CITY OF REDLANDS SENIOR MECHANIC DEFINITION Under direction, to lead and perform highly skilled mechanical work related to City vehicles and equipment including fire, solid waste, and street maintenance
More informationEmployers' Guide to Road Safety Requirements
Employers' Guide to Road Safety Requirements The Occupational Health and Safety Regulation (OHSR) sets out requirements that apply to road safety and workrelated driving. Tables below identify measures
More informationBoilermaking. A big idea for a career that fits.
Boilermaking A big idea for a career that fits. Do you enjoy: working with tools, equipment and machinery building things working both outdoors and indoors working with people travelling Are you: fit patient
More informationProrate Services 1 st Floor, 803 Manning Road NE Telephone (403) Calgary, AB Fax (403) STOP! IMPORTANT
Personal information is collected for the purpose of administering the International Registration Plan and is collected under the authority of Freedom of Information and Protection of Privacy Act section
More informationSupplier self-information
Page 1 of 5 GENERAL INFORMATION General corporate data Address: Legal form: Homepage: V.A.T. Registration No.: Group membership: Subsidiary companies: Ownership: Line of business: Contact person Name Phone
More informationSpecific Accreditation Criteria Infrastructure and Asset Integrity ISO/IEC and ISO/IEC Annex. Lifting equipment assessment
Specific Accreditation Criteria Infrastructure and Asset Integrity ISO/IEC 17020 and ISO/IEC 17025 Annex Lifting equipment assessment January 2018 Copyright National Association of Testing Authorities,
More informationRecord of Work Experiences Trade Qualifier or Pre-Apprenticeship Credits PAINTER AND DECORATOR
Applicant Information Education and Skills Apprenticeship and Trades Certification Division Record of Work Experiences Trade Qualifier or Pre-Apprenticeship Credits PAINTER AND DECORATOR Note to Apprenticeship
More informationCRANES WINCHES WINDLASSES CAPSTANS
CRANES WINCHES WINDLASSES CAPSTANS COMMERCIAL MARINE OFFSHORE OIL GOVERNMENT CUSTOM APPLICATIONS Custom Manufacturing. Absolute Quality. Appleton Marine has continued to supply custom marine deck machinery
More informationYOUR TRADE CERTIFICATION GUIDEBOOK CARPENTER
YOUR TRADE CERTIFICATION GUIDEBOOK PROGRAM PRIOR TO 2017 TABLE OF CONTENTS 03 Apprentice Responsibilities 03 Apprenticeship Pathway Mapping Your Way To Certification 04 Gaining Competencies Through Work
More informationChapter 47 Mobile Elevating Work Platforms (MEWP)
Chapter 47 Mobile Elevating Work Platforms (MEWP) Chapter Outline 1 Overview 2 1.1 Hazards/Impacts 2 2 Scope 2 2.1 Exemptions 2 3 Standards 2 4 Definitions 3 5 Requirements 4 5.1 General 4 5.1.1 Authorization
More informationBP U.S. Pipelines and Logistics (USPL) Safety Manual Page 1 of 7
Safety Manual Page 1 of 7 Scaffolds 1. Purpose This policy establishes the basic safety requirements and safe work practices for the erection, use, inspection, movement, and dismantling of scaffolding.
More informationConstruction Skills Certification Scheme
CSCS Slinger Signaller Candidate Pack Please read this document carefully. Further information and clarification may be obtained from the CSCS Operations Unit, phone 01 533 2500 Guidance Notes for Candidates
More informationApplicant s Name: Visit https://ecpic.commissionaires.ca/login/ to get a check done electronically.
Welcome to the T.E.A.M.S. driver application process. Please fill out the application form completely do not leave any blank spaces where information is requested. If information requested does not apply,
More information1. Introduction. 2. Background. 3. Guidelines. CICA-Endorsed ENGINEER S COMPETENCIES
CICA-Endorsed ENGINEER S COMPETENCIES 1. Introduction This document states the eligibility criteria for applicants seeking CICA recognition in the specific area of practice of Crane Major Inspection Certification,
More informationRail Safety Management Procedure General Engineering and Operational Systems Railway Track Signals - Detonators
1/12 General Engineering and Operational Systems Railway Track Signals - Detonators Revision Date Comments 1 January 2007 Initial Document 2 May 2007 Review and Update to incorporate associated forms 3
More informationWork Experience Form Painter and Decorator
2011 - National Occupational Analysis (NOA) Work Experience Form Painter and Decorator 1-877-978-7233 www.manitoba.ca/tradecareers Personal Information (please print) Legal First Name Middle Initial Legal
More informationAUTOMOTIVE MECHANIC (New position) Job rate: $6, per month
Edmonton Catholic Schools is now accepting applications for the position of AUTOMOTIVE MECHANIC (New position) Job rate: $6,378.00 per month Edmonton Catholic Schools is a large urban school district whose
More informationScaffolding. Safety Guide. STOP! Before you climb
Scaffolding Safety Guide Printed FEB 2015 rebr. AUG 2016 Contents Safety Guide Disclaimer... 1 Safety Guide Objectives... 2 Roles & Responsibilities of Workplace Parties Employers, Supervisors, Workers...
More informationNational Craft Assessment and Certification Program S P E C I F I C A T I O N S
National Craft Assessment and Certification Program S P E C I F I C A T I O N S Industrial Carpentry V5 TBD Focus Statement An industrial carpenter erects concrete forms, plumb, level and to grade; places
More informationSUBCONTRACTOR MANAGEMENT
Doc : Revision. 0 Preparation: Safety Mgr Authority: Director Issuing Dept: Safety Page: Page 1 of 9 Purpose The purpose of this program is to ensure that ANC Foster continues to improve subcontractor
More informationZ5010 (Version 2) TV spigot with fixing plate Mounting instructions
Z5010 (Version 2) TV spigot with fixing plate Mounting instructions Z5010 (Version 2) TV spigot with fixing plate References in the manual CAUTION! IMPORTANT! Symbols on the equipment This refers to a
More informationTower Crane Operator. Occupational Analyses Series. Trades and Apprenticeship Division. Division des métiers et de l apprentissage
Occupational Analyses Series Tower Crane Operator 2012 Trades and Apprenticeship Division Labour Market Integration Directorate National Occupational Classification: Disponible en français sous le titre
More informationWork Performed On or Near Overhead Lines Work Performed On or Near Overhead Lines
Work Performed On or Near Overhead Lines Work Performed On or Near Overhead Lines 1910.269(p) and (q) of Electric Power Generation, Transmission, and Distribution Note: The below information applies only
More informationSECTION 16. Load Handling Equipment (LHE)
SECTION 16 Load Handling Equipment (LHE) 16.A General. 16.A.01 The requirements of this Section are applicable to all load handling equipment (LHE) to include cranes, derricks, hoists and power-operated
More informationElectronics Technician Foreman (New position)
Edmonton Catholic Schools is now accepting applications for the position of Foreman (New position) Edmonton Catholic Schools is a large urban school district whose mission is to provide a Catholic education
More informationOPITO APPROVED STANDARD. LOLER Competent Person. Competence Assessment Standard
OPITO APPROVED STANDARD LOLER Competent Person Competence Assessment Standard OPITO Standard Code: 9064 The content of this document was developed by an industry work group coordinated by OPITO including:
More informationConstruction OS&H Vertical movement
Construction OS&H Vertical movement Summary Common hazards with vertical movement Cranes Hoists Vertical distribution of concrete Falls of materials What are the common hazards with vertical movement?
More informationFREEMAN DISPLAY LABOR
P. O. Box 14210 Orange, CA 92863-1610 714/254-3400 Fax: 714/490-0801 FreemanAnaheimES@freemanco.com NAME OF SHOW: COMPANY NAME: BOOTH#: CONTACT NAME: PHONE#: FAX #: Straight Time- 8:00 A.M. to 5:00 P.M.
More informationISO INTERNATIONAL STANDARD. Cranes Limiting and indicating devices Part 4: Jib cranes
INTERNATIONAL STANDARD ISO 10245-4 First edition 2004-11-01 Cranes Limiting and indicating devices Part 4: Jib cranes Appareils de levage à charge suspendue Limiteurs et indicateurs Partie 4: Grues à flèche
More informationSocial Sector Accreditation Standards Level 4
Social Sector Accreditation Standards Level 4 Introduction These standards for accreditation are produced by the New Zealand Government for the accreditation of providers funded to deliver social services.
More informationWelding Performance Qualification Test Administrators GUIDE FOR APPLICANTS
BRITISH COLUMBIA SAFETY AUTHORITY Welding Performance Qualification Test Administrators GUIDE FOR APPLICANTS Prepared by: Ed Hurd P.Eng. Provincial Safety Manager, Boilers Date: March 2, 2012 Controlled
More informationProfessional Corporation Application for Registration (Form 4-6C)
Chartered Professional Accountants of Ontario 69 Bloor Street East Toronto ON M4W 1B3 T. 416 962.1841 Toll free 1 800 387.0735 cpaontario.ca Professional Corporation Application for Registration (Form
More informationUse of Locally Fabricated or Modified Equipment. DROPS Forum July
Use of Locally Fabricated or Modified Equipment DROPS Forum July 02 2009 Incident 1: Welder Electrocution A rig subcontractor suffered fatal injuries from electrical shock while performing a welding operation.
More informationEMPLOYMENT APPLICATION PREREQUISITE PRE-EMPLOYMENT CONSENT
EMPLOYMENT APPLICATION PREREQUISITE PRE-EMPLOYMENT CONSENT I,, authorize SCHNEIDER EQUIPMENT, INC (dba Schneider Water Services) to conduct through its designated physician or a laboratory testing facility
More informationRigging Fundamentals 101 (Rigging Hardware & Slings)
PLANNING ADVISORY NOTICE Rigging Fundamentals 101 (Rigging Hardware & Slings) When it comes to load handling activities which includes lifting, individuals assigned to the various load handling tasks should
More information