BELL RINGER Write in your journals what labor day means to you. It is defined as a yearly national tribute to the contributions workers have made to
|
|
- Shana Booth
- 6 years ago
- Views:
Transcription
1 BELL RINGER Write in your journals what labor day means to you. It is defined as a yearly national tribute to the contributions workers have made to the strength, prosperity, and well-being of their country.
2 Principles of Architecture and Construction OSHA REGULATIONS AND STANDARDS OSHA Unit introduction, Day 1 of 20. Subparts A & B
3 OSHA SAFETY PRE-TEST 1. What does OSHA stand for? OCCUPATIONAL SAFETY & HEALTH ADMINISTRATION 2. Does OSHA need permission to enter a jobsite? FALSE OSHA IS A FEDERAL GOVERNING AGENCY WHICH HAS JURISDICTION THROUGHOUT THE UNITED STATES. 3. What is the person who is responsible for a task being performed, have to be? A COMPETENT PERSON ACCORDING TO OSHA THAT IS AN INDIVIDUAL THAT HAS HAD SPECIALIZED TRAINING RELATED TO THEIR DUTY/JOB ASSIGNMENT.
4 OSHA SAFETY PRE-TEST (CON T.) 4. What color sign or tape is used to indicate caution? YELLOW SOCIETY AS WELL AS OSHA RECOGNIZE SIMILAR USES OF COLOR AS IT RELATES TO WARNINGS. (EXAMPLE TRAFFIC LIGHTS) 5. GFCI stands for Ground Force Circuit Interrupter? FALSE GFCI stands for Ground Fault Circuit Interrupter. 6. If you are an electrician, what must be done prior to working on a circuit? ALL OF THE ABOVE SHUT OFF BREAKER, USE A LOCK OUT/TAG OUT, & TEST CIRCUIT FOR BEING HOT. 7. How many feet above the adjacent surface must a fall protection system be utilized? 6 FEET
5 OSHA SAFETY PRE-TEST (CON T.) 8. MSDS stands for Material Safety Decision Sheet? FALSE MSDS stands for Material Safety Data Sheet. 9. CAZ (Controlled Access Zone) serve what purpose? DESIGNATES AN AREA OF DANGER OR CAUTION, PROHIBITS UNAUTHORIZED PERSONNEL FROM COMING INTO THE AREA, REQUIRES UNAUTHORIZED PERSONNEL TO GET PERMISSION PRIOR TO ENTRY & REQUIRES SPECIAL TRAINING SUCH AS AN AHA (ACTIVITY HAZZARD ANALYSIS). 10.Are mounted fire extinguishers required for all pieces of equipment with engines? YES THE RISK OF FIRE IS MUCH GREATER ON THESE PIECES OF EQUIPMENT AND THEREFORE IS NECESSARY TO ENSURE SAFETY.
6 OSHA SAFETY-SUBPARTS A AND B Created in 1970, the purpose of OSHA is to inspect or investigate matters of compliance as it relates to OSHA Regulations. Other organizations that have input as it relates to OSHA Regulations: ANSI-American National Standards Institute ASTM-American Society of Testing and Materials ASME-American Society of Mechanical Engineers ASME-American Society of Mechanical Engineers AWS-American Welding Society USACE-United States Army Corps of Engineers These are a few of the agencies that contribute to OSHA regulations. There are a few others. You may find them on the OSHA 1926 web page.
7 OSHA SAFETY-SUBPARTS A & B (CON T) A big consideration that OSHA states as it relates to any process is Refer to the manufacturer s guide for more specifics as it relates to any tool or equipment use. Manufacturer s have recommendations and/or requirements for their tools and/or equipment
8 OSHA SAFETY-SUBPARTS A & B (CON T) PPE (Personal Protective Equipment) (f)(1) Personal protective equipment. Standards in this part requiring the employer to provide personal protective equipment (PPE), including respirators and other types of PPE, because of hazards to employees impose a separate compliance duty with respect to each employee covered by the requirement. The employer must provide PPE to each employee required to use the PPE, and each failure to provide PPE to an employee may be considered a separate violation (f)(2) Training. Standards in this part requiring training on hazards and related matters, such as standards requiring that employees receive training or that the employer train employees, provide training to employees, or institute or implement a training program, impose a separate compliance duty with respect to each employee covered by the requirement. The employer must train each affected employee in the manner required by the standard, and each failure to train an employee may be considered a separate violation.
9 OSHA SAFETY-SUBPARTS A & B (CON T)
10 DARNELL ARMY REPLACEMENT HOSPITAL When complete this hospital located at Ft. Hood, Texas will replace the existing hospital. It will be an eight story building servicing about 1/4 million people. Currently there is about 80 full time safety coordinators on this jobsite with about 1200 employees in various trades.
11 A REASON FOR EMPHASIZING SAFETY Due to fines, but most importantly to the safety of people, this is why the ratio of safety coordinators to employees continues to go down on a yearly basis. We will continue to see more emphasis on training for workers and supervisors.
12 ACCIDENT WAITING TO HAPPEN No PPE, no fall protection and/or fall arrest system and more! The only thing I can say is I guess they don t care if they see tomorrow or not!
13
14 ONE OF THE WORLDS BIGGEST CRANES New Baseball stadium in Milwaukee, Wi. Crane falls and kills 3 people. The cause, winds blowing in excess for weight of the pick.
15 MOTEL 6 CLEBURNE, TEXAS We never know what will happen and when it will happen. After a hard rain, the foundation and some paving were being poured. While a concrete truck was backing up to the concrete pump, a truck encountered a sink hole.
16 DISCUSSION - The driver in the preceding slide could have received a serious injury or possibly could have died. Luckily, he walked away with a few scrapes and a knot on his head. If sited by OSHA, this offence would have been a $10, fine per subpart P section (k). An inspection of the jobsite for access/egress should have been performed identifying this as an area of concern for vehicular traffic and DANGER taped off.
17 OSHA SAFETY-GROUP WORK ACTIVITY - In small groups, find on the internet an example of a safety violation. Site the thing(s) that are in violation and provide which subpart and section the violation would be from (From the OSHA 1926 section on construction safety). Describe why these things are wrong and what are the potential endangerments to people.
OSHA And Washington Presented by Joseph A. Wellington, Esq. Carmody & Torrance LLP
OSHA And Washington Presented by Joseph A. Wellington, Esq. Carmody & Torrance LLP 2011 Carmody & Torrance Scope of presentation OSHA s political leadership speaks OSHA s 2009-2010 initiatives OSHA s FY10
More informationXXVI. Contractor Safety & Environmental Guidelines (For General Contractors and Sub-Contractors)
XXVI. Contractor Safety & Environmental Guidelines (For General Contractors and Sub-Contractors) 1. PURPOSE 1.1 This procedure highlights minimum safe working practices required for all contractors working
More informationProject Safety Orientation and Procedures
www.oakmaninc.com Project Safety Orientation and Procedures Compliance with Project Procedures Oakman believes that sites under our control must be as safe as we can make them not only for our employees,
More informationJob Safety Health Quarterly Job Safety & Health Quarterly
22 22 Job Safety Health Quarterly Protecting Construction Workers from Power Lines by Earl W. Hicks Power Lines and Electrocutions Every day four construction workers die on the job in this country. Think
More informationRocky Top Materials, Inc.
Rocky Top Materials, Inc. 2707 John Deere Dr. Knoxville, TN 37917 (865) 522-0060 1806 Middlecreek Rd. Pigeon Forge, TN 37863 (865) 453-3723 Disclaimer: This document contains brief descriptions of Rocky
More informationA. Illinois Asbestos Abatement Act, as amended through Public Act , effective July 14, 1995.
April 2012, rev. 00 02 8213 Asbestos Abatement 1. General 1.01 Summary of Work A. Contractor 1.02 Definitions 1. The Contractor shall provide removal and proper disposal of asbestos containing materials.
More information1 IMHOFF CUSTOM SERVICES INC. AERIAL LIFT POLICY
1 IMHOFF CUSTOM SERVICES INC. AERIAL LIFT POLICY Purpose and Applicability The purpose of this Program is to ensure that Imhoff Custom Services Inc. employees who operate aerial or scissor lifts have the
More informationScaffold Users Safety Quiz
01/04/1801/04/1801/04/181 Name: Instructor: Date: Scaffold Users Safety Quiz 1. Anyone using scaffold after September 2, 19_97_ must have training on the following: 1. _FALL PROTECTION 2. _FALLING OBJECTS
More informationNCCER Progress Blvd, Alachua, Florida Phone: (888)
NCCER 13614 Progress Blvd, Alachua, Florida 32615 Phone: (888) 622-3720 E-mail: info@nccer.org FIELD SAFETY Competencies/Objectives MODULE 75101-03 INTRODUCTION TO SAFETY 1. Explain the difference between
More informationIron Ore Company of Canada Health, Safety & Environment
Barricading 1 PURPOSE To protect personnel by preventing or controlling access to hazards in work areas by the installation and maintenance of barricades, demarcation and restricting access. This work
More informationSUBCONTRACTOR SAFETY, HEALTH, AND ENVIRONMENTAL MINIMUM PERFORMANCE STANDARD (MPS)
Title: Subcontractor Control Document Effective Date: 2/3/2012 Control Number: THG_0007 Revision Number: 1 Date: 10/6/2015 Annual Review Completed: 5/13/2015 CONTENTS SUBCONTRACTOR SAFETY, HEALTH, AND
More informationFall Protection Plan for Construction
Safety & Health Program 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 Fall Protection Plan for Construction OSHA currently regulates fall protection for construction
More informationCAL/OSHA ELECTRICAL HIGH VOLTAGE
Preparation: Safety Mgr Authority: CEO Issuing Dept: Safety Page: Page 1 of 7 Purpose The purpose of this program is to prevent injuries due to electrical exposure to high voltage for employees and contractors
More information(Insert Company Name)
Site Specific Fall Protection Plan for Residential Construction (Insert Company Name) This Fall Protection Plan Is Specific For The Following Project: Location of Job Date Plan Prepared or Modified Plan
More informationESSENTIAL SAFETY RESOURCES
ESSENTIAL SAFETY RESOURCES GS-3023 LOCKOUT / TAGOUT PROGRAM Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager s Signature: Type
More informationMaintaining Safe Worksite Practices. April 10, 2015
Maintaining Safe Worksite Practices April 10, 2015 Agenda Safe Worksite Practices What do we mean Compliance Positive and Negative HASP Development is the starting point One Process Three Goals. Steps
More informationAre designed to provide a safe working environment, and Govern use of fall protection procedures and equipment.
Fall Protection Plan for Construction OSHA currently regulates fall protection for construction under Part 1926, Subpart M. The standards for regulating fall protection systems and procedures are intended
More informationDescription of Best Practice
Date: April 16, 2012 Tree Risk Awareness Training The Ameren/Contractor Safety Steering Committee s Tree Risk Awareness subcommittee has completed its Tree Risk Awareness Reference Guide training program.
More informationOSHA Inspection Procedures
OSHA Inspection Procedures Chicago, IL St. Louis, MO (847) 463-7239 www.assuranceagency.com This section will provide a summary of the O.S.H.A. inspection process and the procedures that should be followed
More informationSECTION 1: APPLICANT INFORMATION. 1. Have you contacted your local Chapter regarding their established submission process or procedure?
2018 CONSTRUCTION SAFETY EXCELLENCE AWARDS APPLICATION INSTRUCTION STEPS: 1. DOWNLOAD FORM 2. FILL OUT 3. SUBMIT DEADLINE FEBRUARY 2, 2018 SECTION 1: APPLICANT INFORMATION 1. Have you contacted your local
More informationLOCKOUT TAGOUT SAFETY PROGRAM
1. PURPOSE To establish procedures for affixing appropriate lockout/tagout equipment to energy isolating devices and to otherwise disable machines or equipment to prevent unexpected energization, start
More informationPowered Industrial Truck/Forklift Operations Standards and Procedures. Disaster Cycle Services Standards & Procedures DCS SP DMWT
Powered Industrial Truck/Forklift Operations Standards and Procedures Disaster Cycle Services Standards & Procedures DCS SP DMWT April 2015 Change Log Date Page(s) Section Change Author: Deploy Materials,
More informationLockout/Tagout Procedures
Lockout/Tagout Procedures Policy 303.14 1 Introduction 1.1 This procedure establishes the minimum requirements for the lockout and/or tagout of electrical disconnects, liquid, gas and steam valves, hydraulic/pneumatic
More informationHealth and Safety Policy
Health and Safety Policy Policy statement Brunk is committed to meeting our health and safety goals for all processes, and to maintaining a safe and healthy workplace. It is Brunk s policy to provide a
More informationWhite Paper. May Ensuring Safety with a Lockout/Tagout Program Seven Steps to Compliance
White Paper May 2016 Ensuring Safety with a Lockout/Tagout Program Seven Steps to Compliance Do you need a lockout/tagout program at your company? Last year, a lumber mill had $1.6 million worth of reasons
More informationApplication for Employment
Application for Employment In compliance with Federal and State equal employment opportunity, qualified applicants are considered for all positions without regard to race, color, religion, sex, national
More informationWhat's OSHA Up to Now? Standards Affecting Roofing Contractors
What's OSHA Up to Now? Standards Affecting Roofing Contractors NRLRC Annual Seminar Harry Dietz NRCA Director Enterprise Risk Management September 13, 2014 OSHA Citations, Roofing Oct. 2012 to Sept. 2013
More informationSAFETY BOB S CONSTRUCTION SAFETY ORIENTATION
ERI Safety Videos Videos for Safety Meetings 2712 SAFETY BOB S CONSTRUCTION SAFETY ORIENTATION Leader s Guide 2007 ERI Safety Videos SAFETY BOB S CONSTRUCTION SAFETY ORIENTATION This easy-to-use Leader
More informationEmployees receive OSHA Safety training - on-demand any time and at their own pace.
OSHA Safety Evolve e-learning delivers online courses to ensure your employees have the knowledge and skills to work safely and protect your organization from reportable injuries and lost worktime at a
More informationLOCKOUT / TAGOUT PROGRAM
Page: Page 1 of 11 Purpose The purpose of this program is to establish procedures for affixing appropriate lockout/tagout equipment to energy isolating devices and to otherwise disable machines or equipment
More informationCUSP Base Exams and T&D Endorsement Exam Sample Questions and Format
STANDARDS or OPERATIONS 1. A PIT (forklift) is considered unattended when the operator is how far away from a running machine? A. 10 feet B. 25 feet C. 50 feet D. 75 feet PITs are used at every utility
More informationCONTRACTOR SAFETY PRE-QUALIFICATION CHECKLIST. Name of Contractor: Date: Business Address: Telephone No.:( ) Fax No.:( )
CONTRACTOR SAFETY PRE-QUALIFICATION CHECKLIST 1. CONTRACTOR INFORMATION of Contractor: Date: _ Business Address: _ Telephone No.:( ) Fax No.:( )_ Contact Person: Company SIC Code: Years in Business: Date
More informationJHA Number 1a. Job Description Hanging new ductwork. Step 1 Unloading of ductwork
JHA Number 1a Job Description Hanging new ductwork Step 1 Unloading of ductwork Hazards Hazard Controls 1. Slips/Trip/Falls 1. Ensure that the loading/unloading area is cleared of any debris, work materials,
More informationI. Introduction/Welcome to MAPP
I. Introduction/Welcome to MAPP II. Company Policy HSE POLICY It is the commitment of MAPP to perform ALL work in the safest manner possible, while maintaining the highest level of construction practices.
More information"CAUGHT-IN/BETWEEN HAZARDS IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "CAUGHT-IN/BETWEEN HAZARDS IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM
More informationE & B Oilfield Services Inc.
Chapter 1 Company Safety Policy and Procedures E & B Oilfield Services Inc. 1798 W 3250 N. Roosevelt Utah 84066 Danny Abegglen is the designated Company Safety Coordinator. Safety & Health Policy Statement
More information2012 Master Builders Annual Convention February 21, 2012 Des Moines, IA
Iowa Events Center OSHA Update/Inspections 2011 Review, Expectations, Rights, Processes & More 2012 Master Builders Annual Convention February 21, 2012 Des Moines, IA Tom VanderLinden Executive Officer
More information2.0 Normal and customary equipment used on a core drill job include:
CSDA Specification Title: Core Drilling Specification No: CSDA-C-101 Effective Date: June 1, 1998 Revised: Mar 30, 2004 1. Codes, Standards & Definitions 1.1 Occupational Safety and Health Administration
More informationUse of Locally Fabricated or Modified Equipment. DROPS Forum July
Use of Locally Fabricated or Modified Equipment DROPS Forum July 02 2009 Incident 1: Welder Electrocution A rig subcontractor suffered fatal injuries from electrical shock while performing a welding operation.
More informationFall Protection Safety Program and Training Materials
Prepared by Built Insurance Brokerage Fall Protection Safety Program and Training Materials Fall Protection Program... 1 Employee Fall Protection Flyer... 7 Fall Hazard Survey... 8 Requirements for Industrial
More informationDocument Revision Change Table Revision Number
Beaumont Site Procedure No.: BMEHS-002.025 Reviewed: 01/17 Page: 1 of 7 Document Revision Change Table Revision Number Revision Description Revised By Revision Date Rev. 03 Considered as starting document
More informationEmerg. Contact: EMERGENCY CONTACT INFORMATION Fire Department Info: Municipal Police Info: County Sheriff Info: Dept Name: Dept Name: Dept Name:
JOB DETAILS Company Name: Customer: Project Manager: Job Address: Nearest Intersection: Latitude: Date: Job Name: Job Supervisor: Emerg. Contact: Longitude: EMERGENCY CONTACT INFORMATION Fire Department
More informationPersonal Protective Equipment (PPE) Program
Personal Protective Equipment (PPE) Program This written program documents steps Company Name has taken to minimize injury resulting from various occupational hazards present at our construction sites
More information2013 SAFETY EXCELLENCE AWARD SAFETY SURVEY FORM FINAL EVALUATION FOR CRANE & RIGGING SUPPORT
2013 SAFETY ECELLENCE AWARD SAFETY SURVEY FORM FINAL EVALUATION FOR CRANE & RIGGING SUPPORT SCORING: For each item listed below, decide if the entry meets the criteria as follows: 0 = Below Average 1 =
More informationTitle: Lockout / Tagout Effective Date: 11/28/2014 Control Number: THG_0008 Revision Number: 1 Date: 10/8/2015 Annual Review Completed: 5/13/2015
Title: Lockout / Tagout Effective Date: 11/28/2014 Control Number: THG_0008 Revision Number: 1 Date: 10/8/2015 Annual Review Completed: 5/13/2015 Lockout / Tagout CONTENTS I. PURPOSE II. SCOPE III. DEFINITIONS
More informationLockout Tagout Program
SCOPE AND APPLICATION The lockout/tagout standard covers the servicing and maintenance of machines and equipment in which the unexpected energization or startup of the machines or equipment, or release
More informationRRP Form Checklist. Prior to the Job Beginning. During the Job. After the Job
RRP Form Checklist Prior to the Job Beginning Sample Pre-Renovation Form - Issue the Renovate Right Pamphlet At least 7 days prior for an EPA regulated job and at least 15 days prior to a HUD regulated
More informationSAFE WORK PROCEDURE: MOBILE ELEVATED WORK PLATFORMS (MEWP)
Rev: 01 Date: March 2017 Page: 1 of 8 SAFE WORK PROCEDURE: MOBILE ELEVATED WORK PLATFORMS (MEWP) A. OVERVIEW: Safe Work Procedures are crucial to preventing workplace injuries and accidents. Safe Work
More informationBAY CITIES PAVING & GRADING, INC
BAY CITIES PAVING & GRADING, INC 1450 CIVIC CT., BLDG. B # 400, CONCORD, CA 94520 925-687-6666 FX: 925-687-2122 CODE OF SAFE PRACTICES EMPLOYEE RESPONSIBILITIES SAFETY STATEMENT SAFETY POLICY STATEMENT
More information2014 SAFETY EXCELLENCE AWARD SAFETY SURVEY FORM FINAL EVALUATION FOR CRANE & RIGGING SUPPORT
2014 SAFETY ECELLENCE AWARD SAFETY SURVEY FORM FINAL EVALUATION FOR CRANE & RIGGING SUPPORT SCORING: For each item listed below, decide if the entry meets the criteria as follows: 0 = Below Average 1 =
More informationProtective Barriers, Warning Signs and Tags
Protective Barriers, Warning Signs and Tags Short description This procedure outlines the guidance for the use of protective barriers, warning signs and tags on Centennial project sites. Contact person
More informationProtecting Temporary Employees: A Joint Responsibility
Protecting Temporary Employees: A Joint Responsibility Jim Shelton CAS, HNAO The views and opinions expressed in this webinar are those of the presen3ng company, and do not necessarily reflect the official
More informationLockout/Tagout. Company Policy
Company Policy Lockout/Tagout is dedicated to the protection of its employees from occupational injuries and illnesses. is responsible for providing a safe working environment and the employees have and
More informationFCX Department of Occupational Health and Safety. Contents. Open-Hole Policy
FCX Department of Occupational Health and Safety Open-Hole Policy Approval Date: 12/09/13 Original Date: 03/30/09 SOP # FCX-01 Revision # 6 Supersedes X High Medium Task Risk Low NA Contents 1.0 Policy...2
More informationGround Fault Circuit Interrupters (GFCI) & Assured Grounding Program
Ground Fault Circuit Interrupters (GFCI) & Assured Grounding Program Applicable OSHA Standards: 29 CFR 1926.404 1. PURPOSE & SCOPE a.) To establish methods, guidelines and responsibilities to protect Vision
More information3.0 Crane Heavy Lift Service General Requirements
3.0 Crane Heavy Lift Service General Requirements 3.1 Scope of Work: Under the direction of the GPA Representative, contractor s work includes, but is not limited to, providing supervision, materials (if
More informationPROGRAM OVERVIEW. GENERAL SAFETY AWARENESS PROGRAM REGULATORY STANDARD: OSHA General Duty Clause
PROGRAM OVERVIEW GENERAL SAFETY AWARENESS PROGRAM REGULATORY STANDARD: OSHA General Duty Clause INTRODUCTION: There are over one million work related injuries or illnesses in the U.S. each year, many of
More informationSubpart P. Trenching & Excavating CLIENT SAFETY SERVICES
Subpart P Trenching & Excavating CLIENT SAFETY SERVICES We typically start here 54 CLIENT SAFETY SERVICES Aren t Protective Systems Easier? CLIENT SAFETY SERVICES Begin with another end in mind Experience
More informationCOMMONWEALTH SCAFFOLD Quality Scaffolding Across New England
Prepared by Allied Insurance Brokers, Inc. Commonwealth Scaffold, LLC Lockout/Tagout Program and Training Materials Effective Date: 12/14/2012 Revision #: Table of Contents Lockout/Tagout Program... 1
More informationFall Protection Program Prepared by: Western Assurance Corp
Fall Protection Program Prepared by: Western Assurance Corp Desert Utility & Paving, LLC and Century Club Construction, LLC Effective Date: September 21, 2012 Revision Number: 1 TABLE OF CONTENTS 1. Fall
More informationLicence to operate a forklift truck TLILIC2001A Language Activities Manual
Forklift Operations Licence to operate a forklift truck TLILIC2001A Language Activities Manual Teach2Learn Pty Ltd Licence to Operate a Forklift Truck Page 1 of 16 Acknowledgements Each activity in this
More informationSAFETY POLICY & PROCEDURES
SAFETY POLICY & PROCEDURES Maine Staffing Group / New Hampshire Staffing Group and its corporate divisions; Project Flagging Inc., Project Staffing Inc., Special Teams Inc., Direct Personnel LLC., and
More informationThe Hong Kong Polytechnic University Facilities Management Office
The Hong Kong Polytechnic University Facilities Management Office Safety Precautions and Requirements The Contractor shall ensure as a priority in all activities connected with the Works, the safety and
More informationPersonal Protective Equipment (PPE) Program
Safety & Health Program Personal Protective Equipment (PPE) Program 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 This written program documents steps EMA has
More informationSafety Management System. Initial Revision Date: Version Revision No. 02 HAZARD COMMUNICATION (HAZCOM)
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 7 Purpose The purpose of this program is to ensure that the hazards of all chemicals and substances are evaluated
More informationYour Company Name. Hospital Phone: (318) Do cell phones work at the site? Yes No If no, location of the nearest landline:
Your Company Name JOB HAZARD ANALYSIS (JHA) FORM (No elevated work 6 feet or more AGL) Complete daily before beginning work and review when work is complete. A copy of a site evaluation report shall remain
More informationFASHION INSTITUTE OF TECHNOLOGY OUTLINE FOR PREPARING WORK-SPECIFIC ENVIRONMENT, HEALTH AND SAFETY (EHS) PLAN
FASHION INSTITUTE OF TECHNOLOGY OUTLINE FOR PREPARING WORK-SPECIFIC ENVIRONMENT, HEALTH AND SAFETY (EHS) PLAN Before commencing work on site at FIT, Contractor shall prepare a work-specific EHS Plan and
More informationENERGY CONTROL PROGRAM (LOCKOUT/TAGOUT)
Palm Beach State College Florida s First Public Community College ENERGY CONTROL PROGRAM (LOCKOUT/TAGOUT) PALM BEACH STATE COLLEGE ENERGY CONTROL PROGRAM (LOCKOUT/TAGOUT) 1. PURPOSE The purpose of the
More information2018 ConocoPhillips Alaska Excellence in Safety Awards
Introduction These awards are to promote and recognize excellence in safety throughout the construction industry in Alaska. Applications are reviewed by an independent panel of safety professionals with
More informationCrane Facts. Associated Training Services, Corp.
Associated Training Services, Corp. Crane Facts 2 The exact number of cranes being operated within the United States is unknown The best estimates put the number of mobile and tower cranes used in construction
More informationFASHION INSTITUTE OF TECHNOLOGY OUTLINE FOR PREPARING WORK-SPECIFIC ENVIROMENT, HEALTH AND SAFETY (EHS) PLAN
FASHION INSTITUTE OF TECHNOLOGY OUTLINE FOR PREPARING WORK-SPECIFIC ENVIROMENT, HEALTH AND SAFETY (EHS) PLAN Before commencing work on site at FIT, Contractor shall prepare a work-specific EHS Plan and
More informationSTATE OF WASHINGTON. DEPARTMENT OF LABOR AND INDUSTRIES Division of Occupational Safety and Health PO Box Olympia, Washington
STATE OF WASHINGTON DEPARTMENT OF LABOR AND INDUSTRIES Division of Occupational Safety and Health PO Box 44600 Olympia, Washington 98504-4600 May 24, 2016 OSHA #: 1112169 OREGON POTATO COMPANY UBI: 602070392
More informationContractor-in-Charge Requirements
Contractor-in-Charge Requirements UPRR has adopted a Contractor-In-Charge (CIC) policy exception (see attached letter dated May 8, 2009). If the contractor plans on utilizing this exception the contractor
More informationWorkplace Safety Regulation
State Guide to Workplace Safety Regulation Provided by: The Insurance House 205 South Market Marion, IL 62959 618-997-1311 www.inshouse.com Table of Contents Introduction: Illinois and Federal OSHA Regulations...
More informationQueen's University Environmental Health & Safety. 1. Introduction
1 1. Introduction The Joint Health & Safety Committee (JHSC) Workplace Inspection Standard Operating Procedure was developed by the Department of Environmental Health & Safety in accordance with the University
More informationEffective Date: 10-January Table of Contents
Version: 3 Page: 1 of 8 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 2 Environmental Health and Safety Office (EHSO) and Emory Healthcare
More information6 SAFETY CULTURE ESSENTIALS
6 SAFETY CULTURE ESSENTIALS Many organizations want to improve their safety culture in order to reduce injury rates, save money, and increase productivity. But how does a company begin to foster a culture
More informationCONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER EDUCATION 3835 East Thousand Oaks Boulevard, #365 Westlake Village, California 91362 Telephone: (805) 494-0444 Facsimile: (805) 494-0441
More informationGeneral Electrical Safety Awareness Course: E100
General Electrical Safety Awareness Course: E100 30 minutes No No All "non-qualified" or "unqualified" employees Facility or Plant Management All production personnel Office staff and personnel Any general
More informationWorkZone Safety:Traffic Control Plans and Intrusion Prevention Basic Work Zone Traffic Control Principles External Traffic Control
WorkZone Safety:Traffic Control Plans and Intrusion Prevention Basic Work Zone Traffic Control Principles External Traffic Control Intrusion of the Traveling Population Employees exposed to traffic Internal
More informationHAZARD COMMUNICATION (HAZCOM)
RELIANT HOLDINGS LTD AND ITS AFFILIATES Doc No: SOP- 29 Revision Date: Initial Version Preparation: Safety Mgr Authority: CEO Issuing Dept: Safety Page: Page 1 of 8 Purpose The purpose of this program
More informationConsider This. 4.67x6.58 0x1.21 HEALTH & SAFETY NEWSLETTER MARCH Safety Training: No Budget + No Plan = Now What?
4.67x6.58 0x1.21 Consider This MARCH 2016 Trash Blocking Exit Routes Leads to Costly Penalties Hard Hat Inspections and Safety Training: No Budget + No Plan = Now What? Join the National Monitoring Noise
More informationSECTION 2 SAFETY GOALS AND RESPONSIBILITIES P AGE 1
SECTION 2 SAFETY GOALS AND RESPONSIBILITIES P AGE 1 It is our company s policy to perform its work in the safest manner possible, consistent with safe work practices, and according to all governing laws
More informationGUIDE TO IMPLEMENTING AN EFFECTIVE SAFETY PROGRAM
GUIDE TO IMPLEMENTING AN EFFECTIVE SAFETY PROGRAM NAHB Builder s Show Orlando, Florida February 2008 Leon Rogers President Construction Management Associates, LLC PO Box 867 Thayne, WY 83127 (801) 310-0035
More informationProviding a workplace free from recognized hazards and complying with OSHA standards Maintain conditions and adopt practices reasonably necessary to protect workers on the job Be familiar with the standards
More informationTom Carpenter Crane Maintenance Technician
Tom Carpenter Crane Maintenance Technician OSHA 29 CFR 1910.179 Overhead and Gantry Cranes 1910.179 (b)(2) All new overhead and gantry cranes constructed and installed on or after August 31, 1971, shall
More informationWhat s the Difference Between an OSHA Rule and an ANSI Standard? By Glenn Demby, Esq.
1 What s the Difference Between an OSHA Rule and an ANSI Standard? By Glenn Demby, Esq. This article is being reproduced for the American Society of Safety Engineers (ASSE) newsletters and website per
More informationSticklers for Safety. Sep 17, 2014Van Wilkins Electrical Construction and Maintenance
Sticklers for Safety Sep 17, 2014Van Wilkins Electrical Construction and Maintenance Significant injury or loss of human life due to insufficient electrical management expertise is every employer s worst
More informationPreventing Electrocutions:
SAFETY CORNER Preventing Electrocutions: While Working with Scaffolds Near Overhead Power Lines Warning! Workers may be electrocuted when erecting, moving, or working from metal or conductive scaffolds
More information1.0 SAFETY PROGRAM OVERVIEW
1.0 SAFETY PROGRAM OVERVIEW 1.1 PURPOSE It is the policy of W. W. Gay Mechanical Contractor, Inc. to strive for the highest safety standards on our projects. Safety does not occur by chance. It is the
More informationA. Name of chemical B. Price of chemical C. Fire fighting measures D. Health hazards
01 Forklift can only be operated by A. Manager or supervisor only B. Employees who have received proper forklift training only C. Employees who have attended Metalworking SOC D. Employees who have a valid
More informationAN INTRODUCTION TO WORKPLACE SAFETY. This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
AN INTRODUCTION TO WORKPLACE SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the
More informationSafety Tips from the WorkSafe People
Location/Department: Date of Review: Reviewed by: The following safety and health checklist is designed to be used in conjunction with the Accident Fund document Developing a Safety Program Begin With
More informationSTE Sustainable Safety Series. OSHA s Proposed Subparts D and I: What s the Big Deal?
STE Sustainable Safety Series OSHA s Proposed Subparts D and I: What s the Big Deal? Safety Through Engineering Inc. Authors & Presenters Qualified Person Sustainable Safety The integration of safety methods
More informationTailgate Topic Review
[PP 08/05/2018-08/18/2018] Scaffold-Ladder Safety Important Scaffolding Safety Tips For Workers Every year in the United States there are thousands of scaffold-related injuries and roughly 40 scaffold-related
More informationDutchess Community College. Control of Hazardous Energy. Lockout Tagout Program
Dutchess Community College Control of Hazardous Energy Lockout Tagout Program October 2014 Table of Contents Introduction Page 2 Definitions Page 2 Compliance with this Program Page 4 Protective Materials
More informationWashington Hospital Services Transcript for HazCom 2013 and GHS for Part 1
Slide 1 RE-CAP SESSION Hazard Communication 2013 & Globally Harmonized System of Classification & Labeling of Chemicals (GHS) 296-901 WAC Hazard Communication Lay the groundwork. What you need to know
More informationBP OIL -- TOLEDO REFINERY
BP OIL -- TOLEDO REFINERY Document Type: Procedure Refinery Wide Procedure No.: SAF 076 Effective Date: 3/31/17 Scaffold Procedure Revision No.: 8 Owner: E. Stewart / N. Weber Authorized By: Chris Conley
More informationOSHA New Confined Space Rule
OSHA New Confined Space Rule OSHA CLAIMS NEW CONFINED SPACE RULE WILL PREVENT 780 INJURIES A YEAR The Occupational Safety and Health Administration issued a final rule to increase protections for construction
More informationContractor EHS Program Attachments
Contractor EHS Program Attachments Contractor Environmental Health & Safety Program Safety Work Permit Attachments Attachment 1- Contractor Safety Work Permit The Contractor Safety Work Permit Checklist
More information