Unit 002: Engineering organisational efficiency and improvement. Continuous improvement
|
|
- Thomasina Patterson
- 5 years ago
- Views:
Transcription
1 Unit 002: Engineering organisational efficiency and improvement Continuous improvement
2 Introduction We will consider the following: - What is Continuous Improvement? Why Continuous Improvement? The benefits of Continuous Improvements Who is involved in Continuous Improvement? Process Analysis Tools What are the stages of Continuous Improvement? What are the Principles of Continuous Improvements? How flexible working supports Continuous Improvement?
3 What is continuous improvement(ci)? Continuous Improvement is an ongoing effort to improve products, services or processes. These improvements can be incremental Small Steps or Breakthrough Big Bang. The institute of Quality Assurance definition is as follows: - Continuous Improvement a gradual never ending change focused upon the effectiveness and/or the efficiency of an organisation. This approach is used in Environmental Management Systems ISO14000 series. We discussed in Waste Reduction.
4 Why Continuous Improvement? The Importance of Continuous Improvements In the current challenging business environment, continuously improving the way we operate must become part of everyday life. Living with the status quo isn t good enough for us to remain competitive. COO Rolls-Royce plc 2014.
5 What are the benefits of CI? What do you consider the benefits of Continuous Improvement? Please consider and include any experience of CI you have had
6 What are the benefits of CI? Improvements are based on many small changes rather than the radical changes that might arise from Research and Development As the ideas come from the workers themselves, they are less likely to be radically different, and therefore easier to implement Small improvements are less likely to require major capital investment than major process changes The ideas come from the talents of the existing workforce, as opposed to using research, consultants or equipment any of which could be very expensive
7 What are the benefits of CI? All employees should continually be seeking ways to improve their own performance It helps encourage workers to take ownership for their work, and can help reinforce team working, thereby improving worker motivation.
8 Who is involved with CI Improvement in business strategy, business results, customer, employee and supplier relationships can be subject to continual improvement not purely Quality or Shop floor processes. Put simply, it means getting better all the time Hence all the workforce are involved in improvements and solving problems.
9 Problem Analysis tools Deming s 94/6 rule 94% of problems lie with the system and only 6% with the person. Six Honest Working Men by Rudyard Kipling I knew six honest serving men, they taught me all I know; their names are what and why and when, and where and how and who, Deming and Kipling an interesting combination
10 W E Deming William Edward Deming(14/10/1900 to 20/12/1993) American Engineer Statistician Best known for his work in Japan after WWII, Inspirational to the Japanese with Statistical Process Control 1. Better design of products to improve service 2. Higher level of uniform product quality 3. Improvement of product testing 4. Greater sales through global markets Promoted Plan - Do - Study- Act(PDSA) approach
11 Rudyard Kipling Rudyard Kipling 30/12/ /1/1936 Short story writer, novelist, poet and Journalist. Nobel Prize for literature in Notable works, The Jungle Book, Kim, If_ He asked the right questions in Six Honest men
12 What are the 4 stages of CI? (PDCA) The 4 stages of the continuous improvement cycle are: - Plan begin with the customer seeking to understand their requirements. Plan is not just about planning what to do but about scoping, discussion, consensus and communication. Do Try the improvement in practice perhaps in a test phase. Check Is it working as planned? If not, why not? What can be learnt for next time. Act In most cases an adjustment will be required. Once satisfied with the change standardise to implement the change. Note: Deming advocated PDSA where S was study.
13 What are the principles of CI? Continuous or more correctly Continual improvement as the improvements are incremental. Small steps rather than flow The aim of any improvement is to Delight the Customer Any activity that does not add value to the Customer is waste and should be removed or minimised. Ensure improvements are captured and standardised across the organisation. Develop a culture of improvement across the whole work force.
14 How flexible working apply to CI? Flexibility is the basic ability to react to a situation. This could be in having agreements on flexibility of working hours. Alternatively having flexible machines that allow for small batches to be machined economically. The ability to offload work to the supply chain. Multi-Skilling of the work force further adds to flexibility
15 Conclusions We have looked at the following:- Continuous Improvement and Breakthrough improvements. The need for Continuous Improvement in organisations. The benefits of Continuous Improvement. Process analysis. The 4 stages of Continuous Improvement. The Principles of Continuous Improvement Flexible working in Continuous Improvement
16 Process Improvement Feedback on work sheet exercise. Knowledge Gained? R/A/G
QUALITY MANAGEMENT PRINCIPLES
ISO/TC176/SC2/WG15/N130 QUALITY MANAGEMENT PRINCIPLES 1. Quality Management Principles A quality management principle is a comprehensive and fundamental rule or belief, for leading and operating an organisation,
What Deming Saw. Keywords: quality management, control of variation, zero defects, process volatility
What Deming Saw Abstract What Deming Saw: The late W. Edwards Deming did not believe in zero defects it was not economically viable he wrote. But he strongly promoted on-going business process improvement
CHAPTER 11 OPERATIONS MANAGEMENT
CHAPTER 11 OPERATIONS MANAGEMENT Chapter content Introduction An operations-management model The classification of process types for manufacturers and service providers Operations design Operations planning
Michael A. Nolan t/a A MAN 4 Lean Innovation part of Pembroke Alliance
Michael A. Nolan t/a A MAN 4 Lean Innovation part of Pembroke Alliance What is Lean? Its about doing things: QUICKER BETTER CHEAPER...TOGETHER What is Lean? Lean seeks perfection: - Perfect quality - Zero
Presented by Renaldo de Jager 11-1
Operations & Innovations Management Presented by Renaldo de Jager 11-1 Vendor Selection 11-2 VENDOR SELECTION A firm that decides to buy components rather than make them, must select suitable vendors.
Applications of The Deming s 14 Principles. Who was Dr. W. Edwards Deming? Deming s Principles 10/14/13. W. Edwards Deming s 14 Points
Applications of The Deming s 14 Principles Who was Dr. W. Edwards Deming? Dr. W. E. Deming was one of the world s leaders of Quality management. PRESENTED BY SACHIN KHANDELWAL 21 MEHUL LUDBE 22 SANDEEP
Chapter 28 Quality. Quality. Benefits of quality
Quality Quality is a difficult concept to define. W. Edwards Deming, the American quality guru, stated that quality is defined by the customer. Customers may require certain specifications or demand exceptional
LEAN MANUFACTURING & TPM.
LEAN MANUFACTURING & TPM www.fourprinciples.com BACKGROUND The core area of any manufacturing facility is the shop floor. Manufacturing is most often also the largest function within an organisation. In
Trend and Business. Business and Quality Management
Trend and Business Business and Quality Management Nattasit Chaisaard PH.D. Candidate (Civil Engineering) Lecturer of School of Management Science Sukhothai Thammathirat Open University Quality is Buzzword?
DEVELOP TEAMS AND INDIVIDUALS FACILITATOR MANUAL & ASSESSMENT BSBLED401A
DEVELOP TEAMS AND INDIVIDUALS FACILITATOR MANUAL & ASSESSMENT BSBLED401A Precision Group (Australia) Pty Ltd 9 Koppen Tce, Cairns, QLD, 4870 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
Continuous Improvement
Continuous Improvement 1 Continual Improvement versus Continuous Improvement 2 Continual Improvement? Many of us, in all spheres of life (not just in Business and IT Process Improvement), tend to use Continual
Process Management Framework
Process Management Framework Responsible Owner: Business Improvement Coordinator Date: February 2013 UNCONTROLLED DOCUMENT WHEN PRINTED Please refer to the BMS for the latest version Executive Summary
How the Ideas of a 1950s Statistician Taught me more about Management than Business School. Amy Shropshire, CASK Communications
How the Ideas of a 1950s Statistician Taught me more about Management than Business School Amy Shropshire, CASK Communications Scrobbesbyrigscīr......but you can call me Amy W. Edwards Demming image Eighty-five
An Introduction to Hoshin Kanri, a.k.a. Strategic Goal Deployment How to Use this Process to Deploy Your Strategic Goals
An Introduction to Hoshin Kanri, a.k.a. Strategic Goal Deployment How to Use this Process to Deploy Your Strategic Goals Pete Winiarski Win Enterprises, LLC Hoshin Kanri has its roots in the 1950s, with
Application of Continuous Improvement Process in Manufacturing Industry
Application of Continuous Improvement Process in Manufacturing Industry Edwin Joy Pulikkottil 1, Sibinraj R 2 1,2PG Scholar, Dept. of Mechanical Engineering, ECET Coimbatore, India ---------------------------------------------------------------------***---------------------------------------------------------------------
Agile leadership for change initiatives
Agile leadership for change initiatives Author Melanie Franklin Director Agile Change Management Limited Contents Introduction 3 Agile principles 3 Introduction to Agile techniques 6 Working in sprints
WHY QUALITY IS IMPORTANT? PRODUCT AND QUALITY COSTS OF POOR QUALITY COST OF ACHIEVING GOOD QUALITY. Prevention costs.
WHY QUALITY IS IMPORTANT? Lecture 7: Quality management systems PRODUCT AND QUALITY Quality has direct impact on economic results in both ways Costs Incomes Quality assurance Poor quality costs Higher
Topic 11 - Quality. Higher Business Management
Topic 11 - Quality Higher Business Management Learning Intentions / Success Criteria Learning Intentions Methods to ensure quality. Success Criteria By end of the topic you will be able to describe: the
CHAPTER 01 Foundations of Quality and Performance Excellence
1. The view of quality as the satisfaction of customer needs is often called fitness for use. DESC.EVAL.17.01.01 Quality and Performance 2. Since quality relates to goods or services, both only for-profit
PERFORMANCE 2011/Festo AG & Co. KG 1
1 Impulse Impulse is the starting point for Festo s continuous innovation in all areas. Festo Self-organisation, self-motivation and self-renewal form the basis for this process. Innovations are the present.
Macomb County Health Department Performance Management and Quality Improvement Plan
Macomb County Health Department 2017-2019 Performance Management and Quality Improvement Plan MCHD PMQI Plan 2017-2019 Page 1 of 14 I. Purpose Macomb County Health Department Performance Management and
International Journal on Textile Engineering and Processes, ISSN: , Vol 1, Issue 1, Jan2015
Total Quality Management in Terry Fabric Manufacturing Pranjali Chandurkar, CTF Abstract The challenge that companies face as the 21st Century gets underway, is to succeed in global economy where competition
Chapter 27 Lean production
Chapter 27 Lean production The idea of lean production encompasses theories of modern Japanese industrial management that are all designed to achieve the reduction and removal of waste within a business.
PMPA Tech Conference Do we have the Tools and Knowledge to weather the Storm?
PMPA Tech Conference 2014 Do we have the Tools and Knowledge to weather the Storm? Quality Initiatives Malcolm Baldrige National Quality Award ISO Standards (ISO 9001, ISO 14001, AS 9100, ETC ) Six Sigma
HOW TO TRANSFORM. Supplemental Chapter for THE SCIENCE OF LEAN SOFTWARE AND DEVOPS. Extra Material for Accelerate by
HOW TO TRANSFORM Supplemental Chapter for THE SCIENCE OF LEAN SOFTWARE AND DEVOPS Extra Material for Accelerate by Nicole Forsgren, PhD Jez Humble, and Gene Kim 25 NW 23rd Pl, Suite 6314 Portland, OR 97210
Enhancing Audit Program Using Dr. Deming s 14 points. Naren Patel ASQ Fellow October 12-13, 2017
Enhancing Audit Program Using Dr. Deming s 14 points Naren Patel ASQ Fellow October 12-13, 2017 1 Dr. Deming, the Father of Quality W. Edward Deming is famous for the insightful views, ideas and commentary
THE CULTURE CANVAS A Working Guide and Checklist to Support the Development of a High-Performing Culture
denison TM THE CULTURE CANVAS A Working Guide and Checklist to Support the Development of a High-Performing Culture The Denison Model of High Performance A Systems Approach to Understanding and Managing
Modern Manufacturing Worker Learning Model
Modern Manufacturing Worker Learning Model How competency modeling and blended learning can meet training program requirements? 1 Manufacturing Training Landscape 600,000 manufacturing jobs have gone unfilled
SMART SOLUTIONS OPERATIONAL EXCELLENCE SERVICES FOR ENERGY COMPANIES - DISTRICT HEATING
SMART SOLUTIONS OPERATIONAL EXCELLENCE SERVICES FOR ENERGY COMPANIES - DISTRICT HEATING Is your company operationally excellent? Improving the profitability of district heating companies with Operational
IE 362 Quality Control. Week1. (Quality and TQM) Lecture Outline
IE 362 Quality Control Week1 Introduction to Quality Improvement. (Quality and TQM) Dr. Sun Olapiriyakul Lecture Outline Meaning of quality 8 dimensions of quality TQM Quality concepts and philosophies
What Impact Does Kindness Have in Business?
What Impact Does Kindness Have in Business? An Introduction to Creating a Culture of Kindness Appreciative Inquiry Workshop Series for World Kindness Ambassadors by Jeremy Scrivens http://www.theemotionaleconomyatwork.com
Business Improvement Lean Manufacturing Toolkit
Business Improvement Lean Manufacturing Toolkit Lean Introduction. Lean is an influential and established set of principles and methods which can be used in any environment and setting. Lean is essentially
Lesson:-02 DIFFERENT APPROACHES AND SYSTEMS OF MANAGEMENT, SKILLS, ROLES AND MODERN CHALLENGES
Lesson:-02 DIFFERENT APPROACHES AND SYSTEMS OF MANAGEMENT, SKILLS, ROLES AND MODERN CHALLENGES Objectives of the lesson After studying this lesson, you should understand: 1. The various approaches to management
Addressing the challenges of Performance Management. part of our We think series
Addressing the challenges of Performance Management part of our We think series Contents Contents 2 The Return on Investment in Performance Management 3 The challenges of effective Performance Management
There is no quality in construction
There is no quality in construction Ken Cameron General Manager AQUAS About AQUAS AQUAS provide specialist services in Quality, OHS and Environmental management systems including Development of Management
Inside Lake Region. 26th March County Wexford, Ireland
Inside Lake Region County Wexford, Ireland A unique opportunity to see Lake Region s Shingo Bronze Medallion winning site fi rst hand 26th March 2013 An intensive and focussed learning opportunity to fast
Client Outcomes Measurement Tool* Provider Guide
Client Outcomes Measurement Tool* Provider Guide *User title: Client Check-in Form Purpose of the tool The purpose of the Client Outcomes Measurement Tool is: to be a simple tool that is used by BFC providers
Introduction of Healthy Choices at Alfred Health. Prepared for VicHealth Executive Summary
Introduction of Healthy Choices at Alfred Health Prepared for VicHealth Executive Summary Anna Peeters and Tara Boelsen-Robinson Deakin University April 2016 Executive Summary Background There is increasing
The talent to win Talent Innovation
www.pwc.com The talent to win Talent Innovation The strategic talent advantage To fuel innovation, growth and market advantage, you need the right people. You need a talent strategy that drives your business
7 Principles of Lean Supplies. A new approach to delivering an Efficient Workplace
7 Principles of Lean Supplies A new approach to delivering an Efficient Workplace Introduction Lean supplies: where people meet process 2 Lean has transformed manufacturing and continues to make a major
Getting TPM & Lean / CI to Sustain using CTPM s Australasian approach
Getting TPM & Lean / CI to Sustain using CTPM s Australasian approach Author: Ross Kennedy President, CTPM CTPM s Australasian approach to TPM & Lean / CI recognises the critical need of finding and rectifying
What do we believe? We believe that the actions of our suppliers are important factors in our own performance.
Page 40 Suppliers Philosophy PHILOSOPHY What do we believe? We believe that the actions of our suppliers are important factors in our own performance. We recognise that as a major organisation with relationships
7 Principles of Lean Supplies. A new approach to the Efficient Workplace
7 Principles of Lean Supplies A new approach to the Efficient Workplace Introduction Lean supplies: where people meet production 2 Lean has transformed manufacturing and continues to make a major impact
Total Quality Management
Seminar Series On Total Quality Management BIJAY LAL PRADHAN, Ph.D. Quality Assurance & Accreditation Centre, T.U. M Sc Statistics, FDPM(IIMA) Total Quality Management Course Title : Seminar on Total Quality
Training for Six Sigma
^^^ CHAPTER 4 Training for Six Sigma Education (teaching people how to think differently) and training (teaching people how to do things differently) are vital elements in Six Sigma success. Although education
Management systems: Part 1 of 2
Management systems: Part 1 of 2 (Business) Management Systems: Purpose and benefits A (business) management system can be (should be?) a means to: achieve business objectives increase understanding of
Topic. Balanced Scorecard. Performance measurement. William Meaney MBA BSc. ACMA 1
Topic Balanced Scorecard Performance measurement William Meaney MBA BSc. ACMA 1 The Balanced Scorecard Performance measurement William Meaney MBA BSc. ACMA 2 Strategic Implementation People and Systems
Guide to Requirements Gathering
Guide to Requirements Gathering Contents What is requirements gathering? Why requirements gathering is key Requirements gathering activities Interview or workshop? The six key question types The magic
Service Strategy Quick Reference Guide
Service Strategy Quick Reference Guide To enable service providers to think and act in a strategic manner to achieve strategic goals or objectives through the use of strategic assets Value Creation through
4 The balanced scorecard
SUPPLEMENT TO THE APRIL 2009 EDITION Three topics that appeared in the 2007 syllabus have been removed from the revised syllabus examinable from November 2009. If you have the April 2009 edition of the
UNIT-4 ====================================================================== UNIVERSITY SYLLABUS
UNIT-4 ====================================================================== UNIVERSITY SYLLABUS Quality Control: Meaning, process control, SQC control charts, single, double and sequential sampling,
Employee engagement. Introduction. benchmark trends report. Our ETS benchmark
Employee Introduction We re delighted to publish this employee. It s heartening that so many companies now run an employee survey. However, for lots of them, it can still be a challenge to demonstrate
Operations Management
9-1 Management of Quality Operations Management William J. Stevenson 8 th edition 9-2 Management of Quality CHAPTER 9 Management of Quality McGraw-Hill/Irwin Operations Management, Eighth Edition, by William
Your opportunity to develop your quality improvement skills
Your opportunity to develop your quality improvement skills I ve got a greater knowledge and understanding of quality improvement methods. We ve learned tools and methods we can apply in everyday work.
Chapter 5 Aims and objectives. Vision statements
Chapter 5 Aims and objectives Vision statements Sometimes a successful business really does start with a vision. Ray Kroc, the man who brought McDonalds restaurants to the world, entered a small hamburger
Safety philosophy and SMS controlling safety in chemical company. Hannu Alen Mireille Creno-Chauveau
Safety philosophy and SMS controlling safety in chemical company Hannu Alen Mireille Creno-Chauveau Occupational Health and Safety Management System 2 What is different in our approach compared to traditional
HDA Coaching Culture Survey Results 2011
HDA Coaching Culture Survey Results 2011 HDA is a Human capital consultancy that has worked in the area of coaching for 17 years, developing a reputation for a highly successful, outcomes-focused approach
A contingency approach to. Quality System Implementation
A contingency approach to Quality System Implementation B. de Rooij BSO G. J. van der Pijl Tilburg University P.O.B. 90153 5000 LE Tilburg The Netherlands e-mail: PIJL@KUB.NL Abstract This paper describes
POLYTECHNIC OF NAMIBIA
POLYTECHNIC OF NAMIBIA CENTRE FOR OPEN AND LIFELONG LEARNING OFFICE MANAGEMENT & TECHNOLOGY ADMINISTRATIVE MANAGEMENT B (ADM720S) FEEDBACK LETTER NO. 1 FOR SECOND SEMESTER 2015 COMPILED BY: DDJ FREDERICKS
SECTION 2 HUMAN RESOURCE STRATEGY 2.01 CORPORATE HR PLANNING
SECTION 2 HUMAN RESOURCE STRATEGY 2.01 CORPORATE HR PLANNING AUTHORITY: CIVIL SERVICE ACT ADMINISTRATION: P.E.I. PUBLIC SERVICE COMMISSION GOVERNMENT DEPARTMENTS / AGENCIES 1 of 7 1. PURPOSE 1:01 The purpose
BBA Sixth Semester Total Quality Management. -BIJAY LAL PRADHAN M Sc Statistics, FDPM(IIMA) PhD Scholar (TQM)
BBA Sixth Semester Total Quality Management -BIJAY LAL PRADHAN M Sc Statistics, FDPM(IIMA) PhD Scholar (TQM) Total Quality Management Course Title : Total Quality Management Code No. : MGT 163 Area of
ISO High Level Standards (HSL)
ISO High Level Standards (HSL) 4. Context of the organization Understanding the organization and its context Understanding the needs and expectations of interested parties Determining the scope of the
What does transformation mean... to you? Aston Business School s The Transformation Project
What does transformation mean... to you? Aston Business School s The Transformation Project Professor Ashley Braganza, Professor of Organisational Transformation Deputy Director, Brunel Business School
THE NEW ISO STANDARDS ON MANAGEMENT SYSTEMS & THE EFQM EXCELLENCE MODEL
THE NEW ISO STANDARDS ON MANAGEMENT SYSTEMS & THE EFQM EXCELLENCE MODEL 1. Introduction In the year 2015 two ISO standards were revised. ISO 9001:2015, released on October 1, and ISO 14001:2015, released
IPAA PUBLIC SECTOR EXCELLENCE MODEL
IPAA PUBLIC SECTOR EXCELLENCE MODEL SUSTAINABLE EXCELLENCE IN PUBLIC SECTOR MANAGEMENT IPAA ACT 2012 Page 1 TABLE OF CONTENTS The Prime Minister s Awards for Excellence in Public Sector Management... 3
Enhancing performance through employee engagement the MacLeod Review
Enhancing performance through employee engagement the MacLeod Review Presentation to the CIPD Scottish Conference, 12 March 2010 Nita Clarke, Director IPA Vice-chair of the Review The MacLeod Review A
Leadership Inventory. Reflections What are your strengths? What might you need to do to be more effective?
Leadership Inventory Marshall Goldsmith s book What got you here, won t get you there includes in it a Leadership Inventory tool. This is a useful reflective exercise to carry out, thinking about your
2012 Quality Improvement Plan
Nez Perce County 215 10 th Street Lewiston, ID 83501 (208) 799-3100 Fax (208) 799-0349 Latah County 333 E Palouse River Drive Moscow, ID 83843 (208) 882-7506 Fax (208) 882-3494 Clearwater County 105 115
Infrastructure Solution Architect
Role Reporting Information Role Title Infrastructure Solution Architect Position Number Role Reports Directly To Infrastructure Delivery and Support Leader EnergyAustralia Group Executive Manager Chief
Plenary Workshop: Living Your Life as a Leader
AIA Leadership Institute 2016 Plenary Workshop: Living Your Life as a Leader November 18, 2016 Strogoff Consulting Leadership Development Attracting & Retaining Talent Strategic Retreats and Visioning
THE ECB CAPABILITY FRAMEWORK: THE COMPETENCIES
THE ECB CAPABILITY FRAMEWORK: THE COMPETENCIES Table of Contents Introduction to the ECB competency model... 3 The nine ECB behavioural competencies - definitions... 6 Collaborating and communicating...
Topic 1 - Quality Management. This work is copyright. Any inquiries about the use of this material should be directed to the publisher.
First Published March 2015 Topic 1 - Quality Management This work is copyright. Any inquiries about the use of this material should be directed to the publisher. Edition 1 March 2015 BlackLine Design Page
THE PROCESS APPROACH IN ISO 9001:2015
International Organization for Standardization BIBC II, Chemin de Blandonnet 8, CP 401, 1214 Vernier, Geneva, Switzerland Tel: +41 22 749 01 11, Web: www.iso.org THE PROCESS APPROACH IN ISO 9001:2015 Purpose
QA/QC and Efficiency Tactics for Design Professionals
QA/QC and Efficiency Tactics for Design Professionals Based on the Book Lean Tactics for Architects, Engineers and IPD Contractors Presentation by James T. Brown, AIA, ASQ Copyright 2015-2018 QA/E, LLC
Crowdsourcing Best Practice Guide
Crowdsourcing Best Practice Guide Published February 2014 KEY TAKEAWAYS About this report The Crowdsourcing Best Practice Guide was produced by B2B Marketing, with contributions from Brighter Directions,
L e a d e r s h i p S t y l e S u r v e y
L e a d e r s h i p S t y l e S u r v e y This questionnaire contains statements about leadership style beliefs. Next to each statement, circle the number that represents how strongly you feel about the
CHAPTER-7 CONCLUSION AND RECOMMENDATIONS
CHAPTER-7 CONCLUSION AND RECOMMENDATIONS 7.1 Conclusion This study started with an extensive review of literature about quality and its concepts, approaches of quality gurus, TQM tools and techniques,
Testing throughout the software life cycle. Software Testing: INF3121 / INF4121
Testing throughout the software life cycle Software Testing: INF3121 / INF4121 Summary: Week 2 Software development models Sequential / Iterative-Incremental / Testing within a life cycle Test levels Component
MEETING STAKEHOLDER AND QUALITY NEEDS
Unit Level 5 Good Practice MEETING STAKEHOLDER AND QUALITY NEEDS Unit Number Ofqual Reference Credit Value 6 Total Unit Time 60 Guided Learning Hours 20 5005V1 Y/504/9028 CMI s Unique Selling Point (USP)
IMPLEMENT CUSTOMER SERVICE STANDARDS CANDIDATE RESOURCE & ASSESSMENT BSBCUS403A
IMPLEMENT CUSTOMER SERVICE STANDARDS CANDIDATE RESOURCE & ASSESSMENT BSBCUS403A Precision Group (Australia) Pty Ltd 44 Bergin Rd, Ferny Grove, QLD 4055 Email: info@precisiongroup.com.au Website: www.precisiongroup.com.au
Employer Engagement from The JGA Group (JGA Limited) Pam Morgan: Project Leader
Employer Engagement from The JGA Group (JGA Limited) Pam Morgan: Project Leader 1.0 Background Employer engagement was low and we needed to research how we could improve this. As the learning spanned both
Workforce Solutions Guide
Workforce Solutions Guide [Innovative Solutions To Everyday Challenges] Part 2 1/15 Control costs. Meet deadlines. Improve productivity. Capitalize on opportunities. Manage resource constraints. Build
Impact of Agile on Change Management
Impact of Agile on Change Management Author Melanie Franklin Director Agile Change Management Limited Introduction Agile approaches and techniques are having significant impact on the volume, frequency
Driving strategy through customer-centricity
BSG CAPABILITIES FEATURES: IT STRATEGY & ADVISORY CAPABILITY Driving strategy through customer-centricity Introduction: BSG is a consulting and technology company with offices in Johannesburg, Cape Town
GENDER PAY GAP REPORT 2017 FOR EMCOR GROUP (UK) PLC (EMCOR UK)
GENDER PAY GAP REPORT 2017 FOR EMCOR GROUP (UK) PLC (EMCOR UK) INTRODUCTION At EMCOR UK we believe improving equality and gender balance in the workplace is not only the right thing to do; it enables our
"Agile Testing: What Would Deming Do?"
T10 Class 4/19/2012 11:15:00 AM "Agile Testing: What Would Deming Do?" Presented by: Mark Strange Wood Cliff Consulting Brought to you by: 340 Corporate Way, Suite 300, Orange Park, FL 32073 888-268-8770
BEGINNER S GUIDE TO ISO 9001 : Quality Management System Requirements Explained
BEGINNER S GUIDE TO ISO 9001 : 2015 Quality Management System Requirements Explained What is ISO 9001 : 2015? Why use it? ISO 9001 is an internationally recognised standard in quality. It is a guide to
How to Start Your Continuous Improvement Journey
How to Start Your Continuous Improvement Journey 5 Best Practice Steps www.connected.oalgroup.com Discover the five best practice steps food manufacturers take when starting a continuous improvement journey,
APPLICATION OF THE IAEA SAFETY STANDARDS ON MANAGEMENT SYSTEM OR FACILITIES AND ACTIVITIES
APPLICATION OF THE IAEA SAFETY STANDARDS ON MANAGEMENT SYSTEM OR FACILITIES AND ACTIVITIES Vincze, P. International Atomic Energy Agency (IAEA) Vienna, Austria 1. Introduction The IAEA developed a new
Excellent. Average. Q7: Help us with your suggestions on what can be improvised further to make the WOMEN LEAD program better?
#1 Started: Tuesday, May 19, 2015 11:36:08 AM Last Modified: Tuesday, May 19, 2015 11:38:12 AM Time Spent: 00:02:03 IP Address: 203.2.218.145 Moderately satisfied Average Preparing a written set of personal
Competencies. Working in Partnership. Creativity and Innovation Organisational and People Development
Competencies Leadership Competency Framework - Summary Technical Expertise Demonstrates an avid interest in continuously enhancing current skills and learning new ones; applies advanced functional or technical
Historical Phases of Production
Lean 101 Overview Lean Background Taiichi Ohno and Shigeo Shingo developed Lean Manufacturing at Toyota over a period of 20-30 years. Their intention was not to develop some sort of unified field theory
BUSINESS PROCESS RE-ENGINEERING
BUSINESS PROCESS RE-ENGINEERING Continuous Improvement Methods vs Business Process Re-engineering Continuous Improvement Methods 1. Focuses on incremental change in the organization processes 2. Suitable
15 Proven Accountability Tools You Can Use
15 Proven Accountability Tools You Can Use PRACTICAL TOOLS 15 Proven Accountability Tools You Can Use / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
The Lattice Organization. W. L. Gore & Associates, Inc.
The Lattice Organization W. L. Gore & Associates, Inc. Bill Gore Co-founder of W. L. Gore & Associates, Inc., with his wife, Vieve Creator of the lattice organization A lattice organization is one that
Removing the risks of online testing. Breakthrough
Removing the risks of online testing Breakthrough The new approach Breakthrough Removing the risks of online testing Testing job applicants online today is full of risks and compromise. SHL has removed
Stages of Organisational Consciousness: Part I
Stages of Organisational Consciousness: Part I Shaun McCarthy Managing Director and Chairman of Human Synergistics Australia October 2013 In our 2011 book In Great Company Unlocking the Secrets of Cultural
WHITE PAPER CQI. Chartered Quality Institute
WHITE PAPER CQI Chartered Quality Institute ISO 9001:2015 is set to be particularly significant as a result of fundamental changes to both its structure and its contents. Complying with the revised requirements
The Value-Driven Workplace in Financial Services. How smart investments in workplace technology deliver real business value
The Value-Driven Workplace in Financial Services How smart investments in workplace technology deliver real business value In the cost-driven workplace, IT can get stuck in the past.» The boom and bust
Achieving Breakthroughs in Profits and Cash Flows. Noida Management Association August 20, 2016
Achieving Breakthroughs in Profits and Cash Flows Noida Management Association August 20, 2016 Agenda Goal of a Business Organisation Why organisations find it difficult to achieve the Goal? What to Improve