Personal 3D Printer. The low-cost, high-resolution personal 3D printer. Universal solution for any product designer

Transcription

1 Personal 3D Printer The low-cost, high-resolution personal 3D printer Universal solution for any product designer Affordable solution leveraging Objet technology for smooth surfaces and fine details 28-micron, high-resolution printing Tray size: 240 x 200 x 150 mm (9.45 x 7.87 x 5.9 in) Simple and easy operation, suitable for any user Ideal for any office environment

2 Personal 3D Printer Technical Specifications Layer Thickness (Z-axis) Horizontal build layers of 28-micron ( in) Tray Size (X Y Z) mm ( in) Net Build Size (X Y Z glossy) 234 x 192 x mm (9.21 x 7.55 x 5.85 in) Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 900 dpi Accuracy 0.1 mm ( in) Accuracy varies according to geometry, part orientation and print size Material Supported VeroWhitePlus Opaque material Support Type FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges: Sealed 4x1 Kg (2.2 Ibs) cartridges Power Requirements Single phase: V~; 50-60Hz; 7A V~; 50-60Hz; 3.5A Machine Dimensions (W D H) cm ( in) Machine Weight 93 kg (205 lbs) Software Objet Studio features: Automatic build orientation Automatic real time support structure generation Slice on the fly Workstation Compatibility Windows XP, Windows 7 Network Connectivity Ethernet TCP/IP 10/100 base T Input Formats STL and SLC Files Operational Environment Temperature 18 C - 25 C (64 F - 77 F) Relative Humidity % Special Facility Requirements None Jetting Heads SHR (Single Head Replacement), 2 heads Regulatory Compliance: CE/FCC/RoHS Other Features Quiet office operation *All specifications are subject to change without notice. Machine color may vary. About Ltd., the innovation leader in 3D printing for rapid prototyping and additive manufacturing, provides 3D printing systems that enable manufacturers and industrial designers to reduce cost of product development and dramatically shorten time-to-market of new products. Objet s ultra-thin-layer, high-resolution 3D printing systems and materials utilize PolyJet polymer jetting technology, to print ultra-thin 16-micron layers. The market-proven Objet Eden line of 3D Printing Systems and the Objet24 and Objet30 3D desktop printers are based on Objet s patented office-friendly PolyJet Technology. The Objet Connex family is based on Objet s PolyJet Matrix Technology, which jets multiple model materials simultaneously and creates composite Digital Materials on the fly. All Objet systems use Objet s FullCure materials to create accurate, clean, smooth, and highly detailed 3D parts. Objet systems are in use by world leaders in many industries, such as Education, Medical / Medical Devices & Dental, Consumer Electronics, Automotive, toys, consumer goods, and footwear industries in North America, Europe, Asia, Australia, and Japan. Founded in 1998, Objet serves its growing worldwide customer base through offices in USA, Mexico, Europe, Japan, China and Hong Kong, and a global network of distribution partners. Objet owns more than 50 patents and patent pending inventions. For more information, visit us at Ltd. Headquarters 2 Holtzman st., Science Park, P.O Box 2496, Rehovot 76124, Israel T: F: Inc. North America 5 Fortune Drive Billerica, MA USA T: F: GmbH Europe Airport Boulevard B Rheinmünster Germany T: F: AP Asia Pacific Unit 49, 10/f, HITEC 1 Trademart Drive Kowloon Bay, Kowloon Hong Kong T: F: AP Limited China Rep Office Rm1701, CIMIC Tower, 1090 Century Blvd, Pudong Shanghai China T: F: info@objet.com Objet, Quadra, QuadraTempo, PolyJet, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, Objet Studio, CADMatrix, Connex, Connex350, Connex500, Alaris30, Objet24, Objet30, PolyLog, TangoBlack, TangoBlackPlus TangoGray, TangoPlus, VeroBlue, VeroWhite, VerowhitePlus, VeroBlack, VeroGray, Durus, Digital Materials, Polyjet Matrix and ObjetGreen are trademarks of Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q1/11

3 Objet30 Pro The Power to Create Professional Desktop 3D Printer Now with 7 Materials including Clear Transparent and High Temperature!

4 The Ultimate in Professional Desktop 3D Printing High End Performance with a Small Footprint The Objet30 Pro is a 3D printer that combines the accuracy and versatility of a high-end rapid prototyping machine with the small footprint of a regular desktop printer. The Objet30 Pro provides a number of unique capabilities in one machine: the industry s highest level print resolution and 7 different 3D printing materials. In fact, the Objet30 Pro is the world s only desktop 3D printer capable of printing in clear transparent material, high-temperature resistant material and polypropylene-like material. Combine these with Objet s obsession with reliability and ease of use and you get a world-class 3D printer for every prototyping capability that you could need, in-house. Built with your Applications Needs in Mind Featuring a compact build tray size of 300 X 200 X 150 mm, the Objet30 Pro is ideal for the rapid prototyping needs of companies producing Consumer Goods, Consumer Electronics, Medical Devices as well as Rapid Prototyping Service Bureaus and Design Consultancies. Ensure the Successful Delivery of Product Concept to Creation Packing a punch well beyond its size, the Objet30 Pro is the ultimate prototyping solution for designers, engineers and product managers. By providing the industry s highest levels of prototyping accuracy and material versatility, the Objet30 Pro ensures dramatic cuts to product development times and promises the successful delivery of concept to final product creation. Objet30 Pro at a Glance: The ultimate prototyping solution for designers, engineers and product managers Scale model garden-set printed on the Objet30 Pro using 7 different materials Ideal for consumer goods, consumer electronics, medical devices and design consultancies Combines the accuracy and versatility of a high-end RP machine with a small footprint 7 different materials; the world s only desktop 3D printer with clear transparent, high temperature and rigid opaque polypropylene-like materials. Reliable and easy to use

5 The Industry s Widest Desktop Versatility with 7 Materials Windscreen, Headlamps & Base in Objet Transparent Material (Objet VeroClear) for fit and form testing of transparent parts & PMMA simulation Engine & Radiator in Objet High Temperature Material for advanced functional testing, hot air & water flow, static applications & exhibition modeling Bodywork in Objet Rigid Gray Material (Objet VeroGray) ideal for fine detail emphasis and superior dimensional stability Chassis & Wheels in Objet Rigid Black Material (Objet VeroBlack) 7 5 Seats in Objet Rigid Blue Material (Objet VeroBlue) 1 ideal for fine detail emphasis & photography 6 Hubcaps in Objet Rigid White Material (Objet VeroWhitePlus) for multi-purpose applications 7 Axels & Crankshaft in Objet Polypropylene-like Material (Objet DurusWhite) for Polypropylene like snap fits applications Technical Specifications - Objet30 Pro Layer Thickness (Z-axis) Horizontal build layers of 28 microns ( inch) Horizontal build layers of 16 microns for VeroClear material ( inch) Tray Size (X Y Z) mm ( inches) Net Build Size (X Y Z glossy) 294 x 192 x mm (11.57 x 7.55 x 5.85 inches) Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 900 dpi Accuracy Operating Environment 0.1 mm ( inch) typical Accuracy may vary depending on part geometry, size, orientation, material and post processing method Model Materials VeroClear Transparent RGD525 High Temperature VeroWhitePlus Opaque VeroBlue Opaque VeroBlack Opaque VeroGray Opaque DurusWhite Polypropylene-like Support Material FullCure 705 Non-toxic gel-like photopolymer Easily removed by WaterJet Materials Cartridges Sealed 4 x 1 kg (2.2 Ibs) cartridges Power Requirements Single phase: 100 to 200VAC; 50/60Hz; 7A 200 to 240VAC; 50/60Hz; 3.5A Product Dimensions (W D H) cm ( inches) Product Weight 93 kg (205 lbs) Frontend Software Objet Studio features: Automatic build orientation Automatic real time support structure generation Slice on the fly OS Workstation Compatibility Windows XP, Windows 7 32/64-bit Network Connectivity Ethernet TCP/IP 10/100 base T Input File Format STL and SLC Files Operating Environment Temperature: 18 C to 25 C (64 F to 77 F) Humidity: 30 to 70% RH (non-condensing) Special Facility Requirements None Jetting Heads 2 printing heads SHR (Single Head Replacement) Regulatory Compliance CE/FCC/RoHS Other Features Quiet office operation *All specifications are subject to change without notice

6 The Power to Create Objet Ltd., is a leading provider of high quality, cost effective inkjet-based 3D printing systems and materials. A global company, Objet has offices in North America, Europe, Japan, China, Hong Kong, and India. Objet s 3D printing systems and 3D printing materials are ideal for any company involved in the manufacture or design of physical products using 3D software or other 3D content. Companies using Objet s solutions can be typically found in sectors such as consumer goods & electronics, aerospace & defense, automotive, education, dental, medical and medical devices, architecture, industrial machinery, footwear, sporting goods, toys and service bureaus. Founded in 1998, the company has thousands of customers worldwide including a substantial share of the relevant Fortune 100 and Fortune 500. Its award-winning technology (13 awards in 8 years) is based upon over 110 patents and patent pending inventions. Objet s advanced 3D printing systems and range of about 70 materials enable professionals to build prototypes that accurately simulate the true look, feel and function of an end-product, even complex, assembled goods. The Objet Connex line of multi-material 3D printers features the world s only technology to simultaneously jet 2 materials. With this, users can print many different materials into a single part and print various mixed parts on the same build tray. Users can also create advanced composite materials, or Digital Materials featuring unique mechanical and thermal properties. Objet s range of about 70 3D printing materials simulate properties ranging from rigid to rubber-like, transparent to opaque and standard to ABS-grade engineering plastics, with a large number of in-between shore grades and shades. Objet s 3D printers are available in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level professionals all the way to industrial-scale multi-material machines for front-line designers and top manufacturers. Objet s 3D printers feature the industry s highest-resolution 3D printing quality, based on 16-micron ( in.) super-thin layering, wide material versatility, office friendliness and ease of operation. For more information, visit us at and for more about 3D printing industry-related news, business issues and trends, read the Objet Blog. Objet Inc. North America Objet GmbH Europe Objet AP Asia Pacific Objet Shanghai Ltd. China Objet AP Japan Objet AP India T: F: T: F: T: F: T: F: T: T: F: info@objet.com Objet Blog 2012 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray, VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q2/12 The Power to Create

7 Objet Eden250 TM The 16-Micron-layer 3D Printing System Advance to Eden quality The cost effective route to superior models Ultra-thin-layer PolyJet technology 16 micron high resolution ensures smooth surfaces and fine details Tray size: mm Office environment Wide range of materials: FullCure 720, Vero and Durus High Speed & High Quality Printing Modes Click & build network printer The Power to Create

8 Objet Eden250 TM The 16-Micron-layer 3D Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm Net Build Size (X Y Z) mm Build Resolution X-axis: 600 dpi Y-axis: 300 dpi Z-axis: 1600 dpi Printing Modes High Quality (HQ): 16-micron High Speed (HS): 30-micron Typical Accuracy 20-85um for features below 50mm Up to 200um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation) Material Supported Objet FullCure 720: transparent material Objet VeroClear: transparent clear material Objet Vero family: rigide opaque material Objet DurusWhite: polypropylene-like material Support Type Objet FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges Sealed 2 2 kg cartridges easily and instantly replaced through a front-loading door Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm Machine Weight Net 280 kg Gross (in crate) 330 kg Software Objet Studio features: Suggested build orientation and speed, Auto-placement Automatic real time support structure generation Slice on the fly PolyLog Materials Management Network version Input Format STL and SLC File Operational Environment Temperature 18 C 25 C Relative Humidity 30 70% Special Facility Requirements None Jetting Heads SHR (Single Head Replacement), 4 units Network Communication LAN TCP/IP Compatibility Windows XP, Windows 2000 Other Features Removable tray for high productivity Quiet office operation *All specification are subject to change without notice About Objet Objet Ltd., is a leading provider of high quality, cost effective inkjet-based 3D printing systems and materials. A global company, Objet has offices in North America, Europe, Japan, China, Hong Kong, and India. Objet s 3D printing systems and 3D printing materials are ideal for any company involved in the manufacture or design of physical products using 3D software or other 3D content. Companies using Objet s solutions can be typically found in sectors such as consumer goods & electronics, aerospace & defense, automotive, education, dental, medical and medical devices, architecture, industrial machinery, footwear, sporting goods, toys and service bureaus. Founded in 1998, the company has thousands of customers worldwide including a substantial share of the relevant Fortune 100 and Fortune 500. Its award-winning technology (12 awards in 5 years) is based upon over 110 patents and patent pending inventions. Objet s advanced 3D printing systems and range of over 60 materials enable professionals to build prototypes that accurately simulate the true look, feel and function of an end-product, even complex, assembled goods. The Objet Connex line of multi-material 3D printers features the world s only technology to simultaneously jet 2 materials. With this, users can print many different materials into a single part and print various mixed parts on the same build tray. Users can also create advanced composite materials, or Digital Materials featuring unique mechanical and thermal properties. Objet s range of over 60 3D printing materials simulate properties ranging from rigid to rubber-like, transparent to opaque and standard to ABS-grade engineering plastics, with a large number of in-between shore grades and shades. Objet s 3D printers are available in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level professionals all the way to industrial-scale multi-material machines for front-line designers and top manufacturers. Objet s 3D printers feature the industry s highest-resolution 3D printing quality, based on 16-micron ( in.) super-thin layering, wide material versatility, office friendliness and ease of operation. For more information, visit us at and for more about 3D printing industry-related news, business issues and trends, read the Objet Blog. Objet Ltd. Headquarters Objet Inc. North America Objet GmbH Europe Objet AP Asia Pacific Objet Shanghai Ltd. China Objet AP Japan Objet AP India T: F: T: F: T: F: T: F: T: F: T: T: F: info@objet.com Objet Blog 2011 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray, VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q1/12 The Power to Create

9 Eden260V The 16 Micron Layer 3-Dimensional Printing System Superior accuracy, high quality and the power of a large system in a small footprint Ultra-thin-layer PolyJet technology 16 micron high resolution ensures smooth surfaces and fine details Tray size: mm High Speed and High Quality Printing Modes Wide range of materials: FullCure 720, Tango, Vero and Durus 72 hours of unattended continuous printing Optimax for automation of resin handling Small footprint: mm Office environment

10 Eden260V The 16 Micron Layer 3-Dimensional Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm Net Build Size (X Y Z) mm Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes High Quality (HQ): 16-micron High Speed (HS): 30-micron Accuracy mm typical (accuracy varies according to geometry, part orientation and print size) Material Supported FullCure 720 Model transparent VeroWhite Opaque material VeroBlue Opaque material VeroBlack Opaque material TangoBlack, rubber like flexible material TangoGray, rubber like flexible material TangoPlus, rubber like flexible material Durus opaque material Support Type FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges Sealed kg cartridges Automatic switching between cartridges Easily and instantly replaced through a frontloading door Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm Machine Weight Net 280 kg Gross (in crate) 330 kg Software Objet Studio features: Suggested build orientation and speed, Auto-placement Optimax-printing optimization package Automatic real time support structure generation Slice on the fly PolyLog Materials Management Network version Input Format STL and SLC File Operational Environment Temperature 18 C 25 C Relative Humidity 30 70% Special Facility Requirements None Jetting Heads SHR (Single Head Replacement), 8 units Network Communication LAN TCP/IP Compatibility Windows XP, Windows 2000 Other Features Removable tray for high productivity Quiet office operation *All specification are subject to change without notice About, the photopolymer jetting pioneer, develops, manufactures and globally markets ultra-thin-layer, high-resolution 3-dimensional printing solutions for rapid prototyping and rapid manufacturing. The market-proven Eden line of systems is based on Objet s patented office-friendly PolyJet technology. Objet s FullCure materials create accurate, clean, smooth and highly detailed 3-dimensional models, enabling even the most complex 3-D models to be printed with exceptionally high quality, accuracy and speed. Connex500, Objet s latest innovation, is based on Objet s PolyJet Matrix technology, which offers jetting multiple model materials simultaneously. PolyJet Matrix jets Digital Materials creating composite materials which are fabricated on the fly. Objet s solutions enable manufactures and industrial designers to reduce cost of product development cycles and dramatically shorten time-to market of new products. Objet systems are in use by world leaders in many industries, such as automotive, electronics, toy, consumer goods, and footwear industries in North America, Europe, Asia, Australia and Japan. Founded in 1998, Objet serves its growing worldwide customer base through offices in USA, Europe and Hong Kong, and a global network of distribution partners. Objet owns more than 50 patents and patent pending inventions. Ltd. Headquarters 2 Holtzman st., Science Park, P.O Box 2496, Rehovot 76124, Israel T: F: Inc. North America 5 Fortune Drive Billerica, MA USA T: F: GMBH Im Leuschnerpark 4, Griesheim Germany T: F: AP Asia Pacific 13th floor, Unit52A, HITEC 1 Trademart Drive Kowloon Bay, Hong Kong T: F: AP Limited China Rep Office Rm1220, CIMIC Tower, 1090 Century Blvd, Pudong Shanghai P. R. China T: F: info@objet.com Objet, Quadra, QuadraTempo, PolyJet, FullCure, SHR, Eden, Eden250, Eden260, Eden330, Eden350, Eden350V, Eden500V, Job Manager, Objet Studio, Connex, Connex500, PolyLog, TangoBlack, TangoGray, TangoPlus, VeroBlue, VeroWhite, VeroBlack, Durus, Digital Materials and Polyjet Matrix are trademarks of Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners.

11 Objet Eden350/350V TM The 16 Micron Layer 3D Printing System Enjoy high productivity & flexibility with outstanding model quality Eden350/350V Ultra-thin-layer PolyJet technology 16 micron high resolution ensures smooth surfaces and fine details Tray size: mm Office environment Wide range of materials: FullCure 720, Tango, Vero and Durus Single support for all model materials Eden350V 72 hours of unattended continuous printing Optimax for automation of resin handling High Quality Printing Modes & High Speed Upgradable to Objet Connex350 3D Printer The Power to Create

12 Objet Eden350/350V TM The 16 Micron Layer 3D Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm Net Build Size (X Y Z) mm Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes Eden350: High Quality (HQ): 16-micron Eden350V: High Quality (HQ): 16-micron High Speed (HS): 30-micron Typical Accuracy 20-85um for features below 50mm Up to 200um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation) Material Supported Objet FullCure 720: transparent material Objet VeroClear: transparent clear material Objet Vero family: rigide opaque material Objet DurusWhite: polypropylene-like material Objet Tango family: rubber-like material Objet RGD525: high temperature resistant material Support Type Objet FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges Eden350: Sealed kg cartridges Eden350V: Sealed kg cartridges Automatic switching between cartridges Easily and instantly replaced through a front-loading door Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm Machine Weight Net 410 kg Gross (in crate) 500 kg Software Objet Studio features: Optimax-printing optimum package Suggested build orientation and speed, auto-placement Automatic real time support structure generation Slice on the fly PolyLog Materials Management Network version Input Format STL and SLC File Operational Environment Temperature C Relative Humidity 30 70% Special Facility Requirements-None Jetting Heads SHR (Single Head Replacement), 8 units Network Communication LAN TCP/IP Compatibility Windows XP, Windows 2000 *All specification are subject to change without notice About Objet Objet Ltd., is a leading provider of high quality, cost effective inkjet-based 3D printing systems and materials. A global company, Objet has offices in North America, Europe, Japan, China, Hong Kong, and India. Objet s 3D printing systems and 3D printing materials are ideal for any company involved in the manufacture or design of physical products using 3D software or other 3D content. Companies using Objet s solutions can be typically found in sectors such as consumer goods & electronics, aerospace & defense, automotive, education, dental, medical and medical devices, architecture, industrial machinery, footwear, sporting goods, toys and service bureaus. Founded in 1998, the company has thousands of customers worldwide including a substantial share of the relevant Fortune 100 and Fortune 500. Its award-winning technology (12 awards in 5 years) is based upon over 110 patents and patent pending inventions. Objet s advanced 3D printing systems and range of over 60 materials enable professionals to build prototypes that accurately simulate the true look, feel and function of an end-product, even complex, assembled goods. The Objet Connex line of multi-material 3D printers features the world s only technology to simultaneously jet 2 materials. With this, users can print many different materials into a single part and print various mixed parts on the same build tray. Users can also create advanced composite materials, or Digital Materials featuring unique mechanical and thermal properties. Objet s range of over 60 3D printing materials simulate properties ranging from rigid to rubber-like, transparent to opaque and standard to ABS-grade engineering plastics, with a large number of in-between shore grades and shades. Objet s 3D printers are available in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level professionals all the way to industrial-scale multi-material machines for front-line designers and top manufacturers. Objet s 3D printers feature the industry s highest-resolution 3D printing quality, based on 16-micron ( in.) super-thin layering, wide material versatility, office friendliness and ease of operation. For more information, visit us at and for more about 3D printing industry-related news, business issues and trends, read the Objet Blog. Objet Ltd. Headquarters Objet Inc. North America Objet GmbH Europe Objet AP Asia Pacific Objet Shanghai Ltd. China Objet AP Japan Objet AP India T: F: T: F: T: F: T: F: T: F: T: T: F: info@objet.com Objet Blog 2011 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray, VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q1/12 The Power to Create

13 Objet Eden500V TM The 16 Micron Layer 3D Printing System Expand your options with a larger build size, superior quality and accuracy Ultra-thin-layer PolyJet technology 16 micron high resolution ensures smooth surfaces and fine details Tray size: mm Office environment Wide range of materials: FullCure 720, Tango, Vero and Durus Single support for all model materials 72 hours of unattended continuous printing High Speed and High Quality Printing Modes Optimax for automation of resin handling Upgradable to Objet Connex500 3D Printer The Power to Create

14 Objet Eden500V TM The 16 Micron layer 3D Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm Net Build Size (X Y Z) mm Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes High Quality (HQ): 16-micron High Speed (HS): 30-micron Typical Accuracy 20-85um for features below 50mm Up to 200um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation) Material Supported Objet FullCure 720: transparent material Objet VeroClear: transparent clear material Objet Vero family: rigide opaque material Objet DurusWhite: polypropylene-like material Objet Tango family: rubber-like material Objet RGD525: high temperature resistant material Support Type Objet FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges Sealed kg cartridges Automatic switching between cartridges Easily and instantly replaced through a frontloading door Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm Machine Weight Net 410kg Gross (in crate) 500 kg Software Objet Studio features: Optimax-printing optimization package Suggested build orientation and speed, auto-placement Automatic real time support structure generation Slice on the fly PolyLog Materials Management Network version Input Format STL and SLC File Operational Environment Temperature 18 C 25 C Relative Humidity 30 70% Jetting Heads SHR (Single Head Replacement), 8 units Network Communication LAN TCP/IP Compatibility Windows XP, Windows 2000 *All specification are subject to change without notice About Objet Objet Ltd., is a leading provider of high quality, cost effective inkjet-based 3D printing systems and materials. A global company, Objet has offices in North America, Europe, Japan, China, Hong Kong, and India. Objet s 3D printing systems and 3D printing materials are ideal for any company involved in the manufacture or design of physical products using 3D software or other 3D content. Companies using Objet s solutions can be typically found in sectors such as consumer goods & electronics, aerospace & defense, automotive, education, dental, medical and medical devices, architecture, industrial machinery, footwear, sporting goods, toys and service bureaus. Founded in 1998, the company has thousands of customers worldwide including a substantial share of the relevant Fortune 100 and Fortune 500. Its award-winning technology (12 awards in 5 years) is based upon over 110 patents and patent pending inventions. Objet s advanced 3D printing systems and range of over 60 materials enable professionals to build prototypes that accurately simulate the true look, feel and function of an end-product, even complex, assembled goods. The Objet Connex line of multi-material 3D printers features the world s only technology to simultaneously jet 2 materials. With this, users can print many different materials into a single part and print various mixed parts on the same build tray. Users can also create advanced composite materials, or Digital Materials featuring unique mechanical and thermal properties. Objet s range of over 60 3D printing materials simulate properties ranging from rigid to rubber-like, transparent to opaque and standard to ABS-grade engineering plastics, with a large number of in-between shore grades and shades. Objet s 3D printers are available in a range of form-factors, from cost-effective desktop 3D printers ideal for entry-level professionals all the way to industrial-scale multi-material machines for front-line designers and top manufacturers. Objet s 3D printers feature the industry s highest-resolution 3D printing quality, based on 16-micron ( in.) super-thin layering, wide material versatility, office friendliness and ease of operation. For more information, visit us at and for more about 3D printing industry-related news, business issues and trends, read the Objet Blog. Objet Ltd. Headquarters Objet Inc. North America Objet GmbH Europe Objet AP Asia Pacific Objet Shanghai Ltd. China Objet AP Japan Objet AP India T: F: T: F: T: F: T: F: T: F: T: T: F: info@objet.com Objet Blog 2011 Objet, Objet24, Objet30, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroClear, VeroDent, VeroGray, VeroWhite, VeroWhitePlus, Durus, Digital Materials, PolyJet, PolyJet Matrix, ABS-like and ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q1/12 The Power to Create

15 Compact Multi-Material 3D Printing System A Revolution in True-Product Representation The Objet260 Connex is an affordable, compact version of Objet s pioneering line of multi-material 3D printers. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology. What s Unique About Objet Connex? Using Objet s patented simultaneous multi-material jetting technology, the Objet260 Connex can print up to 14 different material properties within a single printed part. The system is uniquely useful for designers and engineers looking to effectively highlight the varying material components in complex or assembled products. Freedom to Select your Own Materials From an unrivalled range of over 60 materials, the Objet260 Connex allows users to select as many as up to 51 Digital Materials with varying mechanical properties, textures and shades simulating anything from rubber to transparency to rigid engineering plastics. The Best. Now in a Smaller Package The Objet260 Connex combines Objet s outstanding 16-micron, high-resolution layer accuracy and multi-material printing with a tray size of 260 x 260 x 200 mm (10.2 x 10.2 x 7.9 inch), small enough to fit in the corner of any office. The system is small, quiet and uses easy to insert materials that come in fully-sealed REACH compliant cartridges. Harness your Creativity. Advance your Business The Objet260 Connex gives you the fullest possible idea of how your end product will look and perform. It encourages designers and engineers to explore and innovate and helps them to make the right choices in a much shorter time. And the result for your business? A better end product, that s delivered to market faster and more cost-efficiently than ever before.

16 Objet260 Connex Compact Multi-Material 3D Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm (10.2 x 10.2 x 7.9 inch) Net Build Size (X Y Z) mm (10.0 x 9.9 x 7.9 inch) Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes Digital Material (DM): 30-micron (0.001 inch) High Quality (HQ): 16-micron ( inch) High Speed (HS): 30-micron (0.001 inch) Typical Accuracy 20-85um for features below 50mm Up to 200um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation) Materials Supported Objet ABS-like Digital Material (RGD5160-DM) Objet VeroClear rigid transparent Objet Tango family of rubber-like flexible Objet FullCure 720 general purpose transparent material Objet Vero family of rigid opaque Objet DurusWhite polypropolyne-like Digital Materials Wide range of composite materials fabricated on the fly including: Engineering plastics such as Objet ABS-like Digital Material (RGD5160-DM), fabricated from RGD515 and RGD535 Transparent shades and patterns Rigid opaque shades Different shore value rubber-like materials Polypropylene with improved thermal resistance Support Type Objet FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges: Four sealed 3.6 kg (7.9 lb) cartridges Objet VeroClear, Objet Tango family Objet DurusWhite and Components of Objet ABS-like Digital Material also available as 1.44kg (3.17 lb) net weight in a 3.6kg size casing Two different model materials loaded Front loading for quick replacement Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm (34.3 x 28.9 x 47.2 inch) Machine Weight Net 264 kg (582 lb) Gross (in crate) 310 kg (683 lb) Software Objet Studio features: Easy selection of materials including Digital Materials Part separation into sub-assemblies Automatic real-time support structure generation Suggested build orientation, speed and auto-placement Slice on the fly Network version Input Format STL, OBJDF and SLC File Operational Environment Temperature 18 C 25 C (64.5 F to 71.5 F) Relative Humidity 30 70% CADMatrix Add-in CADMatrix add-in enables designers and engineers to seamlessly assign Objet model materials to multi-part, multi-material designs within CAD software*, thus allowing for increased control of 3D model validation. Special Facility Requirements None Print Heads 8 units Network Communication LAN TCP/IP Compatibility Windows XP, Windows Vista, Windows 7 3D Models Printed on Objet260 Connex Compact Multi-Material 3D Printer. * CAD software: CADMatrix is compatible with the following: Pro/Engineer, SolidWorks, AutoDesk Inventor About Ltd., the innovation leader in 3D printing for rapid prototyping and additive manufacturing, provides 3D printing systems that enable manufacturers and industrial designers to reduce cost of product development and dramatically shorten time-to-market of new products. Objet s ultra-thin-layer, high-resolution 3D printing systems and materials utilize PolyJet polymer jetting technology, to print ultra-thin 16-micron layers. The market-proven Objet Eden line of 3D Printing Systems and the Objet24 and Objet30 Desktop 3D printers are based on Objet s patented office-friendly PolyJet Technology. The Objet Connex family is based on Objet s PolyJet Matrix Technology, which jets multiple model materials simultaneously and creates composite Digital Materials on the fly. All Objet systems use Objet s FullCure materials to create accurate, clean, smooth, and highly detailed 3D parts. Objet systems are in use by world leaders in many industries, such as Education, Medical / Medical Devices & Dental, Consumer Electronics, Automotive, toys, consumer goods, and footwear industries in North America, Europe, Asia, Australia, and Japan. Founded in 1998, Objet serves its growing worldwide customer base through offices in usa, Mexico, Europe, Japan, China and Hong Kong, and a global network of distribution partners. Objet owns more than 50 patents and patent pending inventions. For more information, visit us at Israel, Headquarters United States, North America Germany, Europe Hong Kong, Asia Pacific Shanghai, China Japan India T: F: T: F: T: F: T: F: T: F: T: T: F: info@objet.com Objet, Quadra, QuadraTempo, PolyJet, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, Objet Studio, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris30, Objet24, Objet30, PolyLog, TangoBlack, TangoBlackPlus TangoGray, TangoPlus, VeroBlue, VeroWhite, VerowhitePlus, VeroBlack, VeroGray, Durus, Digital Materials, Polyjet Matrix and ObjetGreen are trademarks of Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q2/11

17 Connex350 Multi-material 3-Dimensional Printing System Enter the world of multi-material 3D printing with innovative PolyJet Matrix Technology Closer-than-ever simulation of end products combining multiple materials Multi-material parts: simultaneous jetting of different model materials Mixed tray: different parts made with different materials in a single build Wide range of FullCure and composite materials: photopolymer model and support materials; on-the-fly composite Digital Materials Variety of build process and printing modes Boost your creativity with multiple materials and composite materials featuring varied material properties and tones Outstanding quality and accuracy 16-micron, high-resolution layers ensure smooth surfaces and fine details Build tray size of 350x350x200 mm: ideal for a wide range of parts and assemblies Ease-of-use in an office environment

18 Connex350 Multi-material 3-Dimensional Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm ( inch) Net Build Size (X Y Z) mm ( inch) Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes Digital Material (DM): 30-micron (0.001 inch) High Quality (HQ): 16-micron ( inch) High Speed (HS): 30-micron (0.001 inch) Accuracy mm ( inch) typical (accuracy varies according to geometry, part orientation and print size) Supported Model Materials FullCure 720 General Purpose, transparent material Vero Family opaque materials DurusWhite Polypropylene-like material Tango Family rubber-like flexible material Digital Materials Wide range of composite materials fabricated on the fly Support Type FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges: Four sealed 3.6 kg (7.9 lb) cartridges Tango family and DurusWhite also available as 1.44kg (3.17 lb) net weight in 3.6 kg casing Two different model materials loaded Front loading for quick replacement Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm ( inch) Machine Weight Net 500kg (Net 1102 lb) Operational Environment 18 C to 22 C (64.5 F to 71.5 F) Relative Humidity 30 70% Compatibility Windows XP, Windows Vista Software Objet Studio for Connex350 features: Easy selection of materials including Digital Materials Part separation into sub-assemblies Automatic real time support structure generation Suggested build orientation and speed, auto-place Slice on the fly PolyLog Materials Management Network version Input Formats STL, OBJDF and SLC Files CADMatrix Add-in CADMatrix add-in enables designers and engineers to seamlessly assign Objet model materials to multi-part, multi-material designs within CAD software*, thus allowing for increased control of 3D model validation. Special Facility Requirements None Print Heads 8 Units Network Communication LAN TCP/IP * CAD software: CADMatrix is compatible with the following: Pro/ENGINEER, SolidWorks, AutoDesk Inventor About Ltd., the innovation leader in 3D printing, develops, manufactures and globally markets ultra-thin-layer, high-resolution 3-dimensional printing systems and materials that utilize PolyJet polymer jetting technology, to print ultra-thin 16-micron layers. The market-proven Eden line of 3D Printing Systems and the Alaris 30 3D desktop printer are based on Objet s patented office-friendly PolyJet Technology. The Connex family is based on Objet s PolyJet Matrix Technology, which jets multiple model materials simultaneously and creates composite Digital Materials on the fly. All Objet systems use Objet s FullCure materials to create accurate, clean, smooth, and highly detailed 3D parts. Objet s solutions enable manufacturers and industrial designers to reduce cost of product development and dramatically shorten time-to-market of new products. Objet systems are in use by world leaders in many industries, such as automotive, electronics, toy, consumer goods, and footwear industries in North America, Europe, Asia, Australia, and Japan. Founded in 1998, Objet serves its growing worldwide customer base through offices in USA, Europe and Hong Kong, and a global network of distribution partners. Objet owns more than 50 patents and patent pending inventions. Visit Ltd. Headquarters 2 Holtzman st., Science Park, P.O Box 2496, Rehovot 76124, Israel T: F: Inc. North America 5 Fortune Drive Billerica, MA USA T: F: GmbH Airport Boulevard B Rheinmünster Germany T: F: AP Asia Pacific Unit28, 10/f, HITEC 1 Trademart Drive Kowloon Bay, Kowloon Hong Kong T: F: AP Limited China Rep Office Rm1220, CIMIC Tower, 1090 Century Blvd, Pudong Shanghai P. R. China T: F: info@objet.com Objet, Quadra, QuadraTempo, PolyJet, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, Objet Studio, CADMatrix, Connex, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, VeroBlue, VeroWhite, VeroBlack,VeroGray, Durus, Digital Materials, Polyjet Matrix and ObjetGreen are trademarks of Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners.

19 Connex500 The First Multi-material 3-Dimensional Printing System Bring your models closer to your end products with innovative PolyJet Matrix Technology Closer-than-ever simulation of end products combining multiple materials Multi-material parts: simultaneous jetting of different model materials Mixed tray: different parts made with different materials in a single build Wide range of FullCure and composite materials: photopolymer model and support materials; on-the-fly composite Digital Materials Variety of build process and printing modes Boost your creativity with multiple materials and composite materials featuring varied material properties and tones Outstanding quality and accuracy 16-micron, high-resolution layers ensure smooth surfaces and fine details Superb productivity with large-size build tray of 500x400x200 mm Ease-of-use in an office environment

20 Connex500 The First Multi-material 3-Dimensional Printing System Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm ( inch) Net Build Size (X Y Z) mm ( inch) Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes Digital Material (DM): 30-micron (0.001 inch) High Quality (HQ): 16-micron ( inch) High Speed (HS): 30-micron (0.001 inch) Typical Accuracy 20-85um for features below 50mm Up to 200um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation) Supported Model Materials FullCure 720 General Purpose, transparent material Vero Family opaque materials DurusWhite Polypropylene-like material Tango Family rubber-like flexible material Digital Materials Wide range of composite materials fabricated on the fly Support Type FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges: Four sealed 3.6 kg (7.9 lb) cartridges Tango family and DurusWhite also available as 1.44kg (3.17 lb) net weight in 3.6 kg casing Two different model materials loaded Front loading for quick replacement Power Requirements VAC 50/60 Hz 1.5 KW single phase Machine Dimensions (W D H) mm ( inch) Machine Weight Net 500kg (Net 1102 lb) Operational Environment 18 C to 22 C (64.5 F to 71.5 F) Relative Humidity 30 70% Compatibility Windows XP, Windows Vista Software Objet Studio for Connex500 features: Easy selection of materials including Digital Materials Part separation into sub-assemblies Automatic real time support structure generation Suggested build orientation and speed, auto-place Slice on the fly Network version Input Formats STL, OBJDF and SLC Files CADMatrix Add-in CADMatrix add-in enables designers and engineers to seamlessly assign Objet model materials to multi-part, multi-material designs within CAD software*, thus allowing for increased control of 3D model validation. Special Facility Requirements None Print Heads 8 Units Network Communication LAN TCP/IP * CAD software: CADMatrix is compatible with the following: Pro/ENGINEER, SolidWorks, AutoDesk Inventor About Ltd., the innovation leader in 3D printing for rapid prototyping and additive manufacturing, provides 3D printing systems that enable manufacturers and industrial designers to reduce cost of product development and dramatically shorten time-to-market of new products. Objet s ultra-thin-layer, high-resolution 3D printing systems and materials utilize PolyJet polymer jetting technology, to print ultra-thin 16-micron layers. The market-proven Objet Eden line of 3D Printing Systems and the Objet24 and Objet30 Desktop 3D printers are based on Objet s patented office-friendly PolyJet Technology. The Objet Connex family is based on Objet s PolyJet Matrix Technology, which jets multiple model materials simultaneously and creates composite Digital Materials on the fly. All Objet systems use Objet s FullCure materials to create accurate, clean, smooth, and highly detailed 3D parts. Objet systems are in use by world leaders in many industries, such as Education, Medical / Medical Devices & Dental, Consumer Electronics, Automotive, toys, consumer goods, and footwear industries in North America, Europe, Asia, Australia, and Japan. Founded in 1998, Objet serves its growing worldwide customer base through offices in USA, Mexico, Europe, Japan, China and Hong Kong, and a global network of distribution partners. Objet owns more than 50 patents and patent pending inventions. For more information, visit us at Israel, Headquarters United States, North America Germany, Europe Hong Kong, Asia Pacific Shanghai, China Japan India T: F: T: F: T: F: T: F: T: F: T: T: F: info@objet.com Objet, Quadra, QuadraTempo, PolyJet, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, Objet Studio, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris30, Objet24, Objet30, PolyLog, TangoBlack, TangoBlackPlus TangoGray, TangoPlus, VeroBlue, VeroWhite, VerowhitePlus, VeroBlack, VeroGray, Durus, Digital Materials, Polyjet Matrix and ObjetGreen are trademarks of Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q2/11

21 The Power to Create Objet1000 Wide Format 3D Printer Big Prototypes with Flawless Precision

22 Wide Format 3D Printer Big Prototypes with Flawless Precision Ideal for: Big, 1:1 scale prototypes requiring high precision Wide range of fit, form and functional applications Simultaneous printing of large and small, finely detailed 3D models Manufacturers, designers and engineers Automotive, aerospace & defense, consumer goods, household appliances, industrial machinery and specialist service bureaus Small operating teams & prolonged unattended jobs Key Benefits: Extremely large build envelope 1000 x 800 x 500 mm ( inch) Objet Connex multi-material 3D printing technology Simulate standard & ABS-grade engineering plastics Highly reliable Ease of operation Efficient operating cost & fast ROI

23 Big Models at the Touch of a Button! The Objet1000 is an easy to operate, wide format 3D printer for rapidly creating industrial size models and 1:1 scale prototypes. Featuring an ultra-large build tray size of 1000 x 800 x 500mm ( inch), it enables designers, engineers and manufacturers to quickly and accurately prototype any 3D CAD design, no matter how complex. The system is easy to use, can work for prolonged unattended periods, and is perfectly suited to companies in automotive, defense, aerospace, consumer goods, household appliances and industrial machinery. Precision at Every Scale The Objet1000 is equally adept at printing large and small models with no compromise on precision. Print tough, 1:1 scale casings that can be drilled, assembled, and screwed together while also printing small-scale, multi-material product prototypes. The system can just as easily create living hinges, embedded typography, soft-touch over molding, transparent with opaque shades and moving parts; all seamlessly joined to achieve the true look and feel of a fully-assembled consumer product. Fit, Form & Function The Objet1000 is able to run the full gamut of fit, form and functional prototyping requirements. The system combines the precision of inkjet-based 3D printing with Objet s renowned Connex multimaterial build capability. Connex technology offers a choice of over 100 materials, simulating both standard and ABS-grade engineering plastics. In addition, you can print up to 14 materials in a single model to achieve the precise qualities of your intended end product. The Prototyping Solution of Choice With the Objet1000, designers and engineers can quickly prototype large 3D CAD designs, no matter how complex. There s no need to scale the model down, prepare and assemble jigsaw-puzzle pieces, or outsource to an assortment of different machines and technologies. The Objet1000 represents every prototyping solution you will ever need within a single dedicated machine. Bicycle frame 3D printed on the Objet1000 and assembled into a fully-functioning bicycle BIG MODELS. flawless PRECISION.

24 Objet1000 Wide Format 3D Printer. Big Prototypes with Flawless Precision. Technical Specifications Layer Thickness (Z-axis) Horizontal build layers down to 16-micron Tray Size (X Y Z) mm ( inch) Net Build Size (X Y Z) Full as tray size. Max model weight on tray: 200kg Build Resolution X-axis: 600 dpi Y-axis: 600 dpi Z-axis: 1600 dpi Printing Modes Digital Material (DM): 30-micron (0.001 inch) High Quality (HQ): 16-micron ( inch) High Speed (HS): 30-micron (0.001 inch) Typical Accuracy 20-85um for features below 50mm Up to 300um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation) Supported Primary Model Materials Vero Family opaque materials VeroClear - clear transparent material Tango Family rubber-like flexible materials Digital Materials Wide range of composite materials fabricated on the fly including ABS-like Support Type FullCure 705 Support Non-toxic gel-like photopolymer support easily removed by WaterJet Materials Cartridges 6 sealed 18 kg (39.6 lb) cartridges Two different model materials loaded Hot-swappable replacement during print Power Requirements 240 VAC 50/60 Hz 32 A single phase Machine Dimensions (W D H) mm ( inch) Machine Weight Net 1950kg (Net 4300 lb) Operational Environment 18 C to 22 C (64.5 F to 71.5 F) Relative Humidity 30 70% Compatibility Windows 7 x64 only Software Objet Studio for Objet1000 features: Easy selection of materials including Digital Materials Part separation into sub-assemblies Automatic real time support structure generation Suggested build orientation and speed, auto-place Slice on the fly Network version Input Formats STL, OBJDF and SLC Files Special Facility Requirements Floor withstand 750 Kg/m2 Air evacuation system Print Heads 8 Units Network Communication LAN TCP/IP info@objet.com 2012 Objet, Objet24, Objet30, Objet30 Pro, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, CADMatrix, Connex, Objet260 Connex, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus, TangoBlackPlus, VeroBlue, VeroBlack, VeroBlackPlus, VeroClear, VeroDent, VeroGray, VeroWhite, VeroWhitePlus, Durus, PolyJet, PolyJet Matrix, ABS-like and ObjetGreen are trademarks or registered trademarks of Objet Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Q4/12